Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Stal austenityczna" wg kryterium: Temat


Wyświetlanie 1-3 z 3
Tytuł:
Corrosion behavior of Cr-Ni-Mo stainless steel in chemically modified chloride solution
Autorzy:
Zatkalíková, Viera
Markovičová, Lenka
Štrbák, Milan
Powiązania:
https://bibliotekanauki.pl/articles/34670831.pdf
Data publikacji:
2021
Wydawca:
Stowarzyszenie Menedżerów Jakości i Produkcji
Tematy:
austenitic stainless steel
pitting corrosion resistance
inorganic inhibitor
stal austenityczna nierdzewna
odporność na korozję wżerową
inhibitor nieorganiczny
Opis:
Cr-Ni-Mo stainless steels are susceptible to the pitting in aggressive chloride environments. One of the possible ways for the influence of their corrosion behavior is the use of inhibitors as the chemical modification of the environment. The resistance of AISI 316Ti stainless steel to the pitting with/without the inorganic inhibitor was tested by two independent corrosion tests: 24-hours exposure immersion and potentiodynamic polarization test. Both tests were carried out in 1M chloride acidic solution with/without 0.1M molybdate inhibitor at room temperature. Results of immersion tests were evaluated by the corrosion rates calculated from corrosion losses and by the morphology of the pitting. Potentiodynamic polarization curves were evaluated by the pitting potentials.
Źródło:
Quality Production Improvement - QPI; 2021, 3, 1; 299-304
2657-8603
Pojawia się w:
Quality Production Improvement - QPI
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Corrosion properties of 1.4512 ferritic and 1.4404 austenitic steels for the automotive industry
Autorzy:
Zatkalíková, Viera
Markovičová, Lenka
Wróbel-Knysak, Anna
Powiązania:
https://bibliotekanauki.pl/articles/88716.pdf
Data publikacji:
2019
Wydawca:
Stowarzyszenie Menedżerów Jakości i Produkcji
Tematy:
corrosion
ferritic stainless steel
austenitic stainless steel
cyclic potentiodynamic test
exposure test
stal ferrytyczna odporna na korozję
stal austenityczna
test potencjodynamiczny
test ekspozycji
Opis:
Exhaust systems are susceptible to in-service wear because of their exposition to the very aggressive corrosive environment. Various stainless steels grades (mostly ferritic and austenitic, but also martensitic and duplex) and protective coatings are currently used for exhaust system elements to increase their aestetics and corrosion resistance. This article focuses on evaluation and comparison of the common corrosion properties of two stainless steels with different microstructures (ferritic and austenitic) used for exhaust system components at the low ambient temperature (35 °C). An aggressive acidic corrosion solution for electrochemical cyclic potentiodynamic tests (ASTM G61) was chosen to simulate partly inner (condensate) and also external environment (reaction of exhaust gases with water, chlorides in solution after winter road maintenance). Exposure tests of the pitting corrosion resistance were performed according to ASTM G48 standard method.
Źródło:
System Safety : Human - Technical Facility - Environment; 2019, 1, 1; 745-752
2657-5450
Pojawia się w:
System Safety : Human - Technical Facility - Environment
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Local corrosion of AISI 304 stainless steel in acidic chloride solution
Autorzy:
Zatkalíková, Viera
Markovičová, Lenka
Hanusová, Patrícia
Powiązania:
https://bibliotekanauki.pl/articles/104041.pdf
Data publikacji:
2019
Wydawca:
Stowarzyszenie Menedżerów Jakości i Produkcji
Tematy:
austenitic stainless steel
pitting corrosion
exposure test
cyclic potentiodynamic test
direction of rolling
austenityczna stal nierdzewna
korozja wżerowa
próba narażenia
cykliczna próba potencjodynamiczna
kierunek walcowania
Opis:
AISI 304 austenitic stainless steel is recommended and used for various applications in industry, architecture and medicine. Presence of halides in environment evokes a possibility of the local corrosion which limits seriously exploitation of this material in aggressive conditions. The presented paper is focused on the pitting corrosion resistance (“as received” steel surface) in 1M chloride solution (pH=1.2) at a common (20 °C) and an elevated (50 °C) ambient temperatures. 24-hours exposure immersion test (ASTM G48) and cyclic potentiodynamic test (ASTM G61) are used as the independent test methods. The exposure immersion test is carried out with cross-rolled and longitudinally rolled specimens and the effect of direction of rolling on the resistance to pitting is studied.
Źródło:
Quality Production Improvement - QPI; 2019, 1, 1; 268-275
2657-8603
Pojawia się w:
Quality Production Improvement - QPI
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-3 z 3

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies