Autor: Dobrzanska, A. - Katalog OPAC zbiorów

Skocz do pozycji: 1.

Tytuł:: The modern approach to manufacturing of carbon-rhenium nanocomposites
Autorzy:: Dobrzańska-Danikiewicz, A. D.
Wolany, W.
Powiązania:: https://bibliotekanauki.pl/articles/2201076.pdf
Data publikacji:: 2022
Wydawca:: Stowarzyszenie Komputerowej Nauki o Materiałach i Inżynierii Powierzchni w Gliwicach
Tematy:: rhenium
MWCNTs
multiwall carbon nanotubes
nanocomposites
high-temperature method
SEM
scanning electron microscope
TEM
transmission electron microscopy
ren
wielościenne nanorurki węglowe
nanokompozyt
skaningowa mikroskopia elektronowa
transmisyjna mikroskopia elektronowa
Opis:: Purpose The aim of the paper is to present the high-temperature method of producing MWCNTs-Re nanocomposites, the selection of satisfactory production conditions and the presentation of the results of microscopic and spectroscopic studies of nanocomposites produced by this method. Design/methodology/approach Two methods of manufacturing carbon-rhenium nanocomposites were tested: ineffective chemical synthesis and high-temperature reduction using H2, which was proven successful and allowed the production of nanocomposites with the expected properties. The received nanocomposites were investigated using Transmission Electron Microscope (TEM), and Scanning Electron Microscope (SEM), as well as were subjected to spectroscopic examination. Findings The article presents three steps of MWCNTs-Re nanocomposites fabrication using the high-temperature method, functionalization, impregnation and reduction. As part of own work, satisfactory conditions for producing those nanocomposites using a materials science and heuristic analysis were selected. Research limitations/implications The proposed high-temperature method allows to join rhenium nanoparticles with MWCNTs permanently. It is reasonable to test in the future whether the method is also effective for other carbon nanomaterials and/or nanoparticles of other metals. Practical implications MWCNTs-Re nanocomposites can be used as sensors of gases that are harmful to the environment. It was also confirmed that the MWCNTs-Re_4 nanocomposite has catalytic properties. Originality/value The paper presents a modern approach to the manufacturing of MWCNTs-Re nanocomposites, which assumes the use of a high-temperature furnace to heat the material in a hydrogen atmosphere.
Źródło:: Journal of Achievements in Materials and Manufacturing Engineering; 2022, 115, 2; 57--63
1734-8412
Pojawia się w:: Journal of Achievements in Materials and Manufacturing Engineering
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 2.

Tytuł:: Manufacturing technologies thick-layer coatings on various substrates and manufacturing gradient materials using powders of metals, their alloys and ceramics
Autorzy:: Dobrzański, L. A.
Dobrzański, L. B.
Dobrzańska-Danikiewicz, A. D.
Powiązania:: https://bibliotekanauki.pl/articles/367488.pdf
Data publikacji:: 2020
Wydawca:: Stowarzyszenie Komputerowej Nauki o Materiałach i Inżynierii Powierzchni w Gliwicach
Tematy:: powder engineering
manufacturing of powder products
manufacturing technologies thick-layer coatings using powders
dendrological matrix of the technologies potential and attractiveness
holistic augmented Industry 4.0 model
inżynieria proszkowa
produkcja produktów proszkowych
technologie wytwarzania
powłoka grubowarstwowa
matryca dendrologiczna
przemysł 4.0
Opis:: Purpose: The paper is a comprehensive review of the literature on manufacturing technologies thick-layer coatings on various substrates and manufacturing gradient materials using powders of metals, their alloys and ceramics. Design/methodology/approach: Extensive literature studies on manufacturing technologies thick-layer coatings on various substrates and manufacturing gradient materials using powders of metals, their alloys and ceramics have been carried out. The paper is illustrated with examples of various structure images obtained as part of research of engineering materials made by authors with powders. By using knowledge engineering methods, development perspectives of individual technologies were indicated. Findings: The manufacturing technologies thick-layer coatings on various substrates and manufacturing gradient materials using powders of metals, their alloys and ceramics as the advanced digital production (ADP) technologies are proves the highest possible potential and relatively good attractiveness, as well as their fully exploited attractiveness or substantial development opportunities in this respect. Originality/value: According to augmented holistic Industry 4.0 model, many materials processing technologies and among them manufacturing technologies thick-layer coatings on various substrates and manufacturing gradient materials using powders of metals, their alloys and ceramics are becoming very important among product manufacturing technologies. They are an essential part of powder engineering.
Źródło:: Journal of Achievements in Materials and Manufacturing Engineering; 2020, 99, 1; 14-41
1734-8412
Pojawia się w:: Journal of Achievements in Materials and Manufacturing Engineering
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 3.

Tytuł:: Overview of conventional technologies using the powders of metals, their alloys and ceramics in Industry 4.0 stage
Autorzy:: Dobrzański, L. A.
Dobrzański, L. B.
Dobrzańska-Danikiewicz, A. D.
Powiązania:: https://bibliotekanauki.pl/articles/368149.pdf
Data publikacji:: 2020
Wydawca:: Stowarzyszenie Komputerowej Nauki o Materiałach i Inżynierii Powierzchni w Gliwicach
Tematy:: powder engineering
conventional powders manufacturing methods
powder metallurgy
liquid phase sintering
in solid-state sintering
manufacturing of powder products
holistic augmented Industry 4.0 model
inżynieria proszkowa
konwencjonalne metody wytwarzania proszków
metalurgia proszków
faza ciekła spiekania
spiekanie w fazie stałej
produkcja produktów proszkowych
przemysł 4.0
Opis:: Purpose: Among the technologies that play a crucial role in the current stage of development of Industry 4.0 conventional powder engineering technologies are of great importance. Based on a comprehensive literature review, conventional technologies using the powders of metals, their alloys and ceramics are described. Development perspectives of the most widespread among them were indicated. Design/methodology/approach: Extensive literature studies on conventional powder engineering technologies have been carried out. By using knowledge engineering methods, development perspectives of individual technologies were indicated. Findings: In addition to the presentation of conventional sintering technological methods, sintering mechanisms in solid-state and liquid phase sintering which accounts for 90% of the commercial value of sintered products are presented. Originality/value: According to augmented holistic Industry 4.0 model, many materials processing technologies and among them conventional powder engineering technologies play a key role in current industry development. For this reason, these technologies have been characterized in detail on the basis of available literature sources.
Źródło:: Journal of Achievements in Materials and Manufacturing Engineering; 2020, 98, 2; 56-85
1734-8412
Pojawia się w:: Journal of Achievements in Materials and Manufacturing Engineering
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 4.

Tytuł:: Additive and hybrid technologies for products manufacturing using powders of metals, their alloys and ceramics
Autorzy:: Dobrzański, L. A.
Dobrzański, L. B.
Dobrzańska-Danikiewicz, A. D.
Powiązania:: https://bibliotekanauki.pl/articles/1818519.pdf
Data publikacji:: 2020
Wydawca:: Stowarzyszenie Komputerowej Nauki o Materiałach i Inżynierii Powierzchni w Gliwicach
Tematy:: powder engineering
manufacturing of powder products
hybrid technologies using powders
additive manufacturing technologies using powders
dendrological matrix of the technologies potential and attractiveness
holistic augmented Industry 4.0 model
inżynieria proszkowa
produkcja wyrobów proszkowych
technologie hybrydowe z wykorzystaniem proszków
technologie wytwarzania przyrostowego z wykorzystaniem proszków
Opis:: Purpose: The paper is a comprehensive review of the literature on additive and hybrid technologies for products manufacturing using powders of metals, their alloys and ceramics. Design/methodology/approach: Extensive literature studies on conventional powder engineering technologies have been carried out. By using knowledge engineering methods, development perspectives of individual technologies were indicated. Findings: The additive and hybrid technologies for products manufacturing using powders of metals, their alloys and ceramics as the advanced digital production (ADP) technologies are located in the two-quarters of the dendrological matrix of technologies "wide-stretching oak" and "rooted dwarf mountain pine" respectively. It proves their highest possible potential and attractiveness, as well as their fully exploited attractiveness or substantial development opportunities in this respect. Originality/value: According to augmented holistic Industry 4.0 model, many materials processing technologies and among them additive and hybrid technologies for products manufacturing using powders of metals, their alloys and ceramics are becoming very important among product manufacturing technologies. They are an essential part not only of powder engineering but also of the manufacturing development according to the concept of Industry 4.0.
Źródło:: Archives of Materials Science and Engineering; 2020, 102, 2; 59--85
1897-2764
Pojawia się w:: Archives of Materials Science and Engineering
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 5.

Tytuł:: Manufacturing powders of metals, their alloys and ceramics and the importance of conventional and additive technologies for products manufacturing in Industry 4.0 stage
Autorzy:: Dobrzański, L. A.
Dobrzański, L. B.
Dobrzańska-Danikiewicz, A. D.
Kraszewska, M.
Powiązania:: https://bibliotekanauki.pl/articles/1818518.pdf
Data publikacji:: 2020
Wydawca:: Stowarzyszenie Komputerowej Nauki o Materiałach i Inżynierii Powierzchni w Gliwicach
Tematy:: powder engineering
powders manufacturing methods
manufacturing technologies using powders
dendrological matrix of the technologies potential and attractiveness
holistic augmented Industry 4.0 model
inżynieria proszkowa
metody wytwarzania proszków
technologie wytwarzania z użyciem proszków
Opis:: Purpose: The paper is a literature review indicating the importance of powder engineering in the modern stage of Industry 4.0 development. 47 technologies for the manufacturing and use the powders of metal and their alloys and ceramic in the manufacturing of products are indicated. All those technologies were compared in terms of their potential and attractiveness, pointing to their development trends. The focus was solely on powder production methods. Other technologies will be discussed in other papers in the powder engineering cycle. Design/methodology/approach: The authors' considerations are based on an extensive literature study and the results of the authors' previous studies and empirical work. In order to compare the analyzed technologies, the methodology of knowledge engineering are used, including the own method of contextual matrices for comparative analysis of a large set of technologies by presenting them on a dendrological matrix. Findings: The most interesting intellectual achievements contained in the paper include presentations of the authors' original concepts regarding the augmentation of the Industry 4.0 model. Material processing technologies occupy an important place in it, among them powder engineering technologies, both conventional and additive. The most attractive and promising development technologies in powder engineering are identified. Originality/value: The originality of the paper is associated with the novelty of the approach to analysing powder engineering, an indication of its importance for the development of the Industry 4.0 idea, where progress does not depend only on the development of IT technologies. It is also not true that from among technologies only additive technologies play a key role. Using avant-garde analyses in the field of knowledge engineering, the most avant-garde technologies of powder engineering are pointed out.
Źródło:: Archives of Materials Science and Engineering; 2020, 102, 1; 13--41
1897-2764
Pojawia się w:: Archives of Materials Science and Engineering
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 6.

Tytuł:: The digitisation for the immediate dental implantation of incisors with immediate individual prosthetic restoration
Autorzy:: Dobrzański, L. B.
Achtelik-Franczak, A.
Dobrzańska, J.
Dobrzański, L. A.
Powiązania:: https://bibliotekanauki.pl/articles/368724.pdf
Data publikacji:: 2019
Wydawca:: Stowarzyszenie Komputerowej Nauki o Materiałach i Inżynierii Powierzchni w Gliwicach
Tematy:: surgical guide
immediate implant prosthetic restoration
individual abutments
dental implant
3D printing
CNC milling
computed tomography with cone beam
uzupełnienie protetyczne
łącznik
implant stomatologiczny
druk 3D
frezowanie CNC
stożkowa tomografia komputerowa
Opis:: Purpose: The purpose of this study is to present the author's method of planning the procedure of immediate implant-prosthetic restoration in place of a tooth qualified for removal by performing a surgical template and implant-prosthetic restoration based on data obtained in the CBCT test and intraoral scanning 3D model. Design/methodology/approach: The method of planning the implant surgery through the design and manufacture of surgical templates and implant prostheses performed before the start of medical procedures was described on the basis of actual clinical data from patients with anterior segment teeth qualified for extraction for reasons of complications after endodontic treatment. The placement of the implant was planned using virtual reality, where the bone model and the virtual soft tissue model were combined, which made it possible to perform a surgical template and prosthetic implant restoration. For the manufacturing, 3D printing as stereolithography SLA and selective laser sintering SLS for the surgical template manufacturing and CNC milling in the case of the prosthetic implant were used for restoration. Findings: The method allows planning the implant position based on two connected bone and soft tissue models and allows to design and manufacture a surgical guide. In this way, it becomes possible to place implants in the patient's bone during surgery procedure in the planned position and to install the prosthetic implant restoration in the form of an individual abutment and a PMMA crown during the same procedure in the surgical part. Practical implications: Thanks to the method of computer-aided design/manufacturing CAD/CAM production of surgical templates and prosthetic restoration based only on digital models and the planned position of the implant, it is possible to carry out the procedure of immediate tooth extraction and replacement with permanent prosthetic restoration. The whole process is based on the CBCT test performed at the beginning. The presented method allows shortening the procedure time by four times and the rehabilitation time by 3-6 months when performing the procedure in a minimally invasive manner. Originality/value: This article presents the original design and production method of surgical guides. It allows for precise planning of the implant position and transfer of this data to the patient's mouth during the procedure, enabling permanent prosthetic restoration before starting medical procedures.
Źródło:: Journal of Achievements in Materials and Manufacturing Engineering; 2019, 97, 2; 57-68
1734-8412
Pojawia się w:: Journal of Achievements in Materials and Manufacturing Engineering
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 7.

Tytuł:: Application of polymer impression masses for the obtaining of dental working models for the stereolithographic 3D printing
Autorzy:: Dobrzański, L. B.
Achtelik-Franczak, A.
Dobrzańska, J.
Pietrucha, P.
Powiązania:: https://bibliotekanauki.pl/articles/378584.pdf
Data publikacji:: 2019
Wydawca:: Stowarzyszenie Komputerowej Nauki o Materiałach i Inżynierii Powierzchni w Gliwicach
Tematy:: polyvinyl siloxane impression material
alignate impression material
CAD/CAM in dentistry
digital prosthetic working models
materiał wyciskowy poliwinylosiloksanowy
materiał wyciskowy alginianowy
CAD/CAM w stomatologii
Opis:: Purpose: The aim of the work is to execute measurements of digital dental models taken by scanning prosthetic impressions using the engineering CAD software and finding dimensional differences and scale factor for precise reproduction of patient tooth dimensions. Design/methodology/approach: Tests were carried out involving the execution of 3 series of impressions for selected impression materials, which were then scanned using two types of prosthetic scanners. Gypsum models based on mentioned impressions were scanned and dimensionally compared with impression-based digital models. Benchmark impressions were also performed in order to verify the obtained results and determine the correction factor for dimensions. The dimensional differences between impression groups were calculated by using Engineering CAD software. Findings: It was found, that compared to the base model, the digital model has a smaller volume than the object being mapped, the digital models based directly on the impression should be 0.09 - 0.12% rescaled to match the dimensions of the base model. Research limitations/implications: It is necessary to perform a practical verification of the results achieved and apply the determined coefficient in practice by creating working models using precise devices such as a 3D SLA printer and verify their results with intraoral scanner based models. Practical implications: This test will allow making precise working models using a 3D printer, allowing finally to perform, for example, implant-based bridges directly from the level of implants, using the masses described in the study. Originality/value: The comparative studies of polyvinyl siloxane and alignate impression materials were carried out in order to measure dimensional differences between working models made directly from the impression and gypsum models and compared with pattern, which allowed to determine the expansion coefficient, which will allow to work in 3D printing technology with close representation of real situation in the patient's oral cavity, which is particularly important when performing full arch bridges and extensive work on implants, including direct implants. The work has practical applications for both dental engineers and dentists performing advanced prosthetic work.
Źródło:: Archives of Materials Science and Engineering; 2019, 95, 1; 31-40
1897-2764
Pojawia się w:: Archives of Materials Science and Engineering
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Informacja

Wyszukujesz frazę "Dobrzanska, A." wg kryterium: Autor

Źródło danych

Dostawca treści

Kolekcja

Rok wydania

Wydawca

Temat

Autor

Typ dokumentu

Język