- Tytuł:
- Surface Quality in Milling of AZ91D Magnesium Alloy
- Autorzy:
-
Zagórski, Ireneusz
Korpysa, Jarosław - Powiązania:
- https://bibliotekanauki.pl/articles/102494.pdf
- Data publikacji:
- 2019
- Wydawca:
- Stowarzyszenie Inżynierów i Techników Mechaników Polskich
- Tematy:
-
magnesium alloys
surface roughness
high-speed dry milling
stopy magnezu
chropowatość powierzchni
szybkie frezowanie na sucho - Opis:
- This paper is an attempt at determining the effect of technological parameters of milling on the surface roughness of the AZ91D magnesium alloy. The cutting tool used in tests was a TiAlN-coated carbide milling cutter. The milling tests were carried out at variable cutting speed, feed per tooth and depth of cut, and the results were compared. The analysis was based on the 2D roughness parameters measured on the end and lateral faces of specimens, as well as on the 3D roughness parameters measured on the end faces of specimens. The test results indicated that the increase in the feed per tooth results in the increase in the value of 2D and 3D surface roughness parameters. It was found that cutting speed and axial depth of cut have a negligible effect on the 2D roughness of the workpiece surface, whereas the increase in cutting speed results in the reduction of the 3D surface roughness parameters.
- Źródło:
-
Advances in Science and Technology. Research Journal; 2019, 13, 2; 119-129
2299-8624 - Pojawia się w:
- Advances in Science and Technology. Research Journal
- Dostawca treści:
- Biblioteka Nauki
Artykuł