Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Wang, S." wg kryterium: Autor


Wyświetlanie 1-11 z 11
Tytuł:
The Reinforcement of the TNT System by a Newly-designed GAP-based Polyurethane-Urea: a Molecular Simulation Investigation
Autorzy:
Qian, W.
Shu, Y.
Ma, Q.
Li, H.
Wang, S.
Chen, X.
Powiązania:
https://bibliotekanauki.pl/articles/358512.pdf
Data publikacji:
2016
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Przemysłu Organicznego
Tematy:
TNT
GAP
polyurethane-urea
inter-molecular interaction
mechanical properties
Opis:
A glycidyl azide (GAP)-based polyurethane-urea (PUU) modifier used in the 1,3,5-trinitrotoluene (TNT)-based composite explosive was investigated by molecular simulation. Inter-molecular interactions were investigated using quantum chemistry calculation on the dimer of TNT and GAP-PUU, and attractive forces were found between the two molecules. The cohesive energy densities and the solubility parameters were obtained through molecular dynamics simulations combined with thermodynamic calculations on the TNT and GAP-PUU amorphous cell models, and the miscibility of the modifier in molten TNT was predicted to be good. The interaction energies and the mechanical properties were then obtained by molecular simulations and mechanical calculations on the solid-phase models of the GAP-PUU with TNT along three crystalline directions, and an improvement in the mechanical properties was predicted.
Źródło:
Central European Journal of Energetic Materials; 2016, 13, 2; 411-426
1733-7178
Pojawia się w:
Central European Journal of Energetic Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Thermal Decomposition Kinetics of Hexanitrohexaazaisowurtzitane/Ammonium Perchlorate
Autorzy:
Zhu, Y.-L.
Wang, K.-K.
Shan, M.-X.
Zheng, X.-D.
Jiao, Q.-J.
Wang, J.-S.
Powiązania:
https://bibliotekanauki.pl/articles/358067.pdf
Data publikacji:
2016
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Przemysłu Organicznego
Tematy:
hexanitrohexaazaisowurtzitane
ammonium perchlorate
thermal analysis
thermal decomposition kinetics
Opis:
The thermal decomposition kinetics of hexanitrohexaazaisowurtzitane/ ammonium perchlorate (HNIW/AP) have been investigated by thermogravimetrydifferential scanning calorimetry-mass spectrometry (TG-DSC-MS) simultaneous analysis. TG showed that there were three weight loss processes for the thermal decomposition of the HNIW/AP mixture. The first was ascribed mainly to the thermal decomposition of HNIW, while the second and third were assigned to that of AP. The presence of AP has little effect on the thermal decomposition process of the HNIW component. The apparent activation energy of the thermal decomposition of the HNIW component, calculated by the Kissinger method, was little changed compared to that of neat HNIW. The addition of HNIW to AP caused the onset and end temperatures of the thermal decomposition to be decreased and the decomposition process to be shortened. The high-temperature and lowtemperature decomposition processes of AP became blurred in the presence of HNIW, and this was supported by the MS results.
Źródło:
Central European Journal of Energetic Materials; 2016, 13, 1; 149-159
1733-7178
Pojawia się w:
Central European Journal of Energetic Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Microstructure, Mechanical and Detonation Properties of Elastomeric Micro/Ultrafine-rubber Modified TNT-based Molten Energetic Composites
Autorzy:
Ma, Q.
Wang, P.-S.
Luo, G.
Wen, M.-P.
Gao, D.-Y.
Zheng, B.-H.
Shu, Y.-J.
Powiązania:
https://bibliotekanauki.pl/articles/358122.pdf
Data publikacji:
2015
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Przemysłu Organicznego
Tematy:
micro and ultrafine rubber
2,4,6-trinitrotoluene
molten energetic composites
mechanical properties
detonation performance
Opis:
Elastomeric micro- and ultrafine-rubber are first considered as binders in melt-cast explosives for improving the mechanical properties. Acrylonitrile-butadiene rubber (NBR), in ultrafine fully vulcanized form (UF-NBR), carboxylated acrylonitrile-butadiene rubber (CNBR), in ultrafine fully vulcanized form (UF-CNBR), styrene-butadiene rubber (SBR), in ultrafine fully vulcanized form (UF-SBR), carboxylated styrene-butadiene rubber (CSBR), in ultrafine fully vulcanized form (UF-CSBR), acrylic rubber (ACM), in ultrafine fully vulcanized form (UF-ACM), room temperature vulcanized silicone rubber (RTV), in ultrafine fully vulcanized form (UF-RTV) and polytetrafluoroethene (PTFE) in micro-rubber form (PTFE-M) were utilized for modifying 2,4,6-trinitrotoluene (TNT) based melt-cast explosives. Based on their dispersity in TNT and RDX slurry, only UF-NBR, UF-CNBR and PTFE-M can be used. In the modification experiment, their influence on the mechanical and detonation performance of the matrixes were studied, as well as the impact sensitivity. Compared with PTFE-M and UF-CNBR, UF-NBR improved the tensile and compressive strength of the original formulation CYCLOTOL-65/35. The toughening mechanism was also explained through interfacial interactions and fracture energy analysis. The predicted detonation properties of the modified formulations (detonation pressure variations from 26 to 28 GPa, detonation velocity variations from 7900 to 8100 m/s) are at the same energy level as CYCLOTOL-65/35. In addition, the drop hammer impact testing results confirm that the formulation containing UF-NBR is more sensitive than the one with UF-CNBR, with the same amount of additive.
Źródło:
Central European Journal of Energetic Materials; 2015, 12, 4; 723-743
1733-7178
Pojawia się w:
Central European Journal of Energetic Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Comparative Theoretical Investigation on Energetic Substituted Furazanyl Ethers
Autorzy:
Liu, N.
Wang, K.
Shu, Y.
Zeman, S.
Wang, B.
Wang, W.
Powiązania:
https://bibliotekanauki.pl/articles/358622.pdf
Data publikacji:
2018
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Przemysłu Organicznego
Tematy:
furazanyl ethers
heats of formation
bond dissociation energy
detonation performance
melting point
Opis:
Furazanyl ether has great potential to be an important candidate as a casting explosive and energetic plasticizer. The density functional theory (DFT) method was used to investigate the heats of formation (HOFs), molecular stability, detonation performance and melting point of a series of substituted furazanyl ethers at B3LYP/6-311G(d,p) level. The results show that the introduction of –N3 or –N(O)=N– groups significantly improves the HOFs values of the derivatives. The bond dissociation energies (BDEs) were analyzed, showing that the N–O bond in the furazan ring is the weakest for most compounds and the ring is vulnerable to cleavage in thermal decomposition. The calculation of density, detonation velocities and detonation pressures suggests that the substitution of –NF2, –CF(NO2)2, furoxan or –N(O)=N– group is an effective method for enhancing their detonation performance. The melting points were determined according to the variation of specific heat capacity, and good estimates were obtained in comparison with the available experimental data. Taking into account the detonation performance and melting point, four compounds are favoured for application in melt cast explosive or energetic plasticizers.
Źródło:
Central European Journal of Energetic Materials; 2018, 15, 1; 47-71
1733-7178
Pojawia się w:
Central European Journal of Energetic Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Synthesis, Structure and Energetic Properties of a Catenated N6, Polynitro Compound: 1,1’-Azobis(3,5-dinitropyrazole)
Autorzy:
Li, Y.-N.
Shu, Y.-J.
Wang, Y.-L.
Wang, B.-Z.
Zhang, S.-Y.
Bi, F.-Q.
Powiązania:
https://bibliotekanauki.pl/articles/358573.pdf
Data publikacji:
2017
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Przemysłu Organicznego
Tematy:
energetic compound
1,1’-azobis(3,5-dinitropyrazole)
synthesis
energetic properties
Opis:
A nitrogen-rich, polynitro energetic compound with an N,N-azo linkage, 1,1’-azobis(3,5-dinitropyrazole) (ABDNP), has been synthesized by an oxidative coupling reaction of 1-amino-3,5-dinitropyrazole with different oxidizing agents. The target compound was characterized by IR spectroscopy, 1H and 13C nuclear magnetic resonance spectroscopy, elemental analysis, mass spectra, X-ray diffraction and differential scanning calorimetry (DSC). The DSC results show that 1,1’-azobis(3,5-dinitropyrazole) decomposes at a relatively high onset temperature (202.9 °C), which indicates that 1,1’-azobis(3,5-dinitropyrazole) has acceptable thermal stability. The energetic properties were obtained, with a measured density and heat of formation matched by theoretically computed values based on the B3LYP method.
Źródło:
Central European Journal of Energetic Materials; 2017, 14, 2; 321-335
1733-7178
Pojawia się w:
Central European Journal of Energetic Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
An Insensitive Booster Explosive: DAAF Surface-coated with Viton A
Autorzy:
Li, X.
Wu, B.
Liu, S.
An, C.
Wang, J.
Powiązania:
https://bibliotekanauki.pl/articles/358841.pdf
Data publikacji:
2018
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Przemysłu Organicznego
Tematy:
DAAF
refinement
surface-coated
thermal analysis
impact sensitivity
Opis:
3,3’-Diamino-4,4’-azoxyfurazan (DAAF) is the principal component of an insensitive booster explosive; refined DAAF and DAAF surface-coated with Viton A were prepared. Scanning electron microscopy (SEM), X-ray diffraction (XRD), and differential scanning calorimetry (DSC) were employed to characterize the morphology, composition, and thermal decomposition of these samples. The impact sensitivity and theoretical detonation velocity of DAAF-based composites were also measured and analyzed. The results showed that DAAF surface-coated with Viton A was successfully obtained, and the impact sensitivity of DAAF/Viton A composites was much lower than that of crude DAAF. In addition, DAAF/Viton A composites exhibited better thermal stability compared to crude DAAF and refined DAAF. The theoretical detonation velocity of DAAF/Viton A composites and TATB/Viton A composites are roughly the same. Therefore, there is still great potential for DAAF to be used as the main explosive component of a booster explosive.
Źródło:
Central European Journal of Energetic Materials; 2018, 15, 3; 445-455
1733-7178
Pojawia się w:
Central European Journal of Energetic Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Thermally Induced Polymorphic Transformation of Hexanitrohexaazaisowurtzitane (HNIW) Investigated by in-situ X-ray Powder Diffraction
Autorzy:
Liu, Y.
Li, S.
Wang, Z.
Xu, J.
Sun, J.
Huang, H.
Powiązania:
https://bibliotekanauki.pl/articles/358065.pdf
Data publikacji:
2016
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Przemysłu Organicznego
Tematy:
HNIW
polymorphism
in situ X-ray diffraction
phase transition
heat stimulation
Opis:
The ε→γ phase transition of HNIW induced by heat was investigated with in situ X-ray powder diffraction (PXRD). The effects of purity, particle size, insensitive additives and the time of isothermal heat treatment on the phase transition were evaluated. It was found that the phase transition is irreversible with changes in temperature, and the two phases can coexist in a certain temperature range. Moreover, the initial phase transition temperature increases with increasing purity and decreasing particle size of HNIW, and thus with the approximate crystal density. The addition of graphite and paraffin wax to HNIW as insensitive additives leads to a decrease in the initial phase transition temperature, but the addition of TATB does not affect the initial phase transition temperature. Thus, TATB is a suitable insensitive additive. Moreover, at the critical temperature, the isothermal time determined the efficiency of the ε- to γ-phase transition. This work lays the foundations for the choice of molding technologies, performance test methods, ammunition storage options, as well as the manufacture of HNIW-based explosive formulations.
Źródło:
Central European Journal of Energetic Materials; 2016, 13, 4; 1023-1037
1733-7178
Pojawia się w:
Central European Journal of Energetic Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Ignition and Combustion Performance of the Primary Condensed-phase Combustion Products from Boron-based Fuel-rich Propellants
Autorzy:
Liu, L.-L.
He, G.-G.
Wang, Y.-H.
Hu, S.-G.
Powiązania:
https://bibliotekanauki.pl/articles/358859.pdf
Data publikacji:
2017
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Przemysłu Organicznego
Tematy:
boron-based fuel-rich propellant
primary combustion products
ignition
combustion performance
Opis:
The primary condensed-phase combustion products of a boron-based fuel-rich propellant were ignited using a high-power CO2 laser in a pressurized and windowed combustion chamber under variable pressure. The ignition and combustion performances were characterized using an ultraviolet-visible spectrometer and a high-speed camera. The experimental results showed that the combustion of the condensed-phase combustion products originate from the combustion of carbon, and boron may not take any part in the combustion process because of the formation of a thick boron oxide coating and agglomeration after the primary combustion process. Both particle size and the ingredients play an important role in the combustion reaction of the condensed-phase products. It was observed that a lower particle size and a higher boron carbide content are beneficial for the combustion reaction of the products; higher primary and secondary combustion pressures clearly improved the secondary combustion efficiency of the propellant in the combustion reaction.
Źródło:
Central European Journal of Energetic Materials; 2017, 14, 2; 448-460
1733-7178
Pojawia się w:
Central European Journal of Energetic Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Synthesis and Theoretical Studies of a New Insensitive Explosive, 2’-Methyl-3-nitro-2’H-[1,3’-bi(1,2,4-triazole)]-5,5’-diamine
Autorzy:
Luo, J.
Liu, Y.
Wang, J.
Chai, T.
Yuan, J.
Chang, S.
Yu, Y.
Jing, S.
Ma, H.
Powiązania:
https://bibliotekanauki.pl/articles/358633.pdf
Data publikacji:
2017
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Przemysłu Organicznego
Tematy:
insensitive explosive
synthesis
theoretical studies
density functional theory
new 1,2,4-triazole derivative
Opis:
A new insensitive energetic material 2’-methyl-3-nitro-2’H-[1,3’-bi(1,2,4-triazole)]-5,5’-diamine (1) was prepared by a three-step synthesis from commercially available chemicals. The energetic title compound was comprehensively characterized by various means, including FT-IR, multinuclear (1H, 13C, 14N) NMR spectroscopy, elemental analysis, HPLC and thermal analysis. The sensitivities of the synthesized material towards various external stimuli (impact, friction) were determined according to the BAM method. The optimized structure and related thermodynamic parameters were obtained at the DFT-B3LYP/6-31+G** theoretical level. The detonation properties of the material were also predicted according to the Kamlet-Jacobs formulae and the Monte-Carlo method. The results show that the density, heat of formation, detonation velocity, detonation pressure, impact sensitivity and purity were 1.83 g/cm3, 369 kJ/mol, 7.52 km/s, 25.4 GPa, 82.3 J and 97.7%, respectively. In addition, the compound was an insensitive high explosive which could meet the requirements of high energetic materials.
Źródło:
Central European Journal of Energetic Materials; 2017, 14, 2; 269-280
1733-7178
Pojawia się w:
Central European Journal of Energetic Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Synthesis and Property of 1,4-Diamino-3,6- dinitropyrazolo[4,3-c]pyrazole and Its Derivatives
Autorzy:
Li, Y.-N.
Wang, B.-Z.
Shu, Y.-J.
Zhang, S.-Y.
Lian, P.
Powiązania:
https://bibliotekanauki.pl/articles/358674.pdf
Data publikacji:
2016
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Przemysłu Organicznego
Tematy:
3,6-dinitropyrazolo[4,3-c]pyrazole (DNPP)
1,4-diamino-3,6- dinitropyrazolo[4,3-c]pyrazole (DADNP)
4,4’-(triaz-1-ene-1,3-diyl)bis(1- amine-3,6-dinitropyrazolo[4,3-c]pyrazole) (TBADNP)
N-amination reaction
synthesis
property
Opis:
A synthetic procedure has been developed for the synthesis of 1,4-diamino- 3,6-dinitropyrazolo[4,3-c]pyrazole (DADNP) via N-amination reaction. Its derivatives, 4,4’-(triaz-1-ene-1,3-diyl)bis(1-amine-3,6-dinitropyrazolo[4,3-c] pyrazole) (TBADNP) and 1,4-dinitramino-3,6-dinitropyrazolo[4,3-c]pyrazole (DNADNP), were first designed and synthesized by the diazotization and nitrification of amino group, and their structures were characterized by IR, 1H NMR, 13C NMR, elementary analysis and MS. The thermal properties of target compounds were studied by means of differential scanning calorimetry (DSC) and thermogravimetry (TG). The thermal decomposition peak temperatures of DADNP, TBADNP and DNADNP are 227, 236 and 288 °C, respectively. Results show that the derivatives of 1,4-diamino-3,6-dinitropyrazolo[4,3-c]pyrazole have better thermal stability.
Źródło:
Central European Journal of Energetic Materials; 2016, 13, 2; 321-331
1733-7178
Pojawia się w:
Central European Journal of Energetic Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Influence of Processing Techniques on Mechanical Properties and Impact Initiation of an Al-PTFE Reactive Material
Autorzy:
Feng, B.
Fang, X.
Li, Y.-C.
Wu, S.-Z.
Mao, Y.-M.
Wang, H.-X.
Powiązania:
https://bibliotekanauki.pl/articles/358654.pdf
Data publikacji:
2016
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Przemysłu Organicznego
Tematy:
Al-PTFE
reactive materials
quasi-static compression
impact initiation
Opis:
Reactive materials (RMs) or impact-initiated materials have received much attention as a class of energetic materials in recent years. To assess the influence of processing techniques on mechanical properties and impact initiation behaviors of an Al-PTFE reactive material, quasi -static compression tests and drop-weight tests were performed. Scanning electron microscopy (SEM) was used to identify the characteristics of the interior microstructures of the Al-PTFE samples. A sintering process was found to transform Al-PTFE from a brittle to a ductile material with an increased elasticity modulus (from 108-160 MPa to 256-336 MPa) and yield stress (from 12-16 MPa to 19-20 MPa). Increasing the molding pressure from 36 MPa to 182 MPa increased the elastic modulus of all Al-PTFE samples and also the yield stress of unsintered ones. Unsintered samples in general required less energy to initiate than sintered ones. As the molding pressure increased, the impact initiation energy for sintered Al-PTFE fell from 96 J to 68 J, whereas the initiation energy for unsintered Al-PTFE rose from 68 J to 85 J. PTFE nanofiber networks observed in sintered samples formed under the higher molding pressures could contribute to the opposite trends observed in the impact initiation energy of unsintered and sintered Al-PTFE samples.
Źródło:
Central European Journal of Energetic Materials; 2016, 13, 4; 989-1004
1733-7178
Pojawia się w:
Central European Journal of Energetic Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-11 z 11

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies