Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Liu, Y. J." wg kryterium: Autor


Wyświetlanie 1-11 z 11
Tytuł:
Research on a New Synthesis of LLM-105 Using N-Nitroso-bis(cyanomethyl)amine
Autorzy:
Jing, S.
Liu, Y.
Liu, D.
Guo, J.
Powiązania:
https://bibliotekanauki.pl/articles/358371.pdf
Data publikacji:
2016
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Przemysłu Organicznego
Tematy:
LLM-105
energetic materials
synthesis
characterization
properties
Opis:
A new three-step synthetic method was designed to prepare 2,6-diamino- 3,5-dinitropyrazine 1-oxide (LLM-105) with an overall yield of 43.5%, using iminodiacetonitrile, triethylamine and hydroxylamine hydrochloride as the starting materials, and involved nitrosylation, cyclization and nitration. The structure of LLM-105 was characterized by FTIR, 1H NMR spectroscopy and elemental analysis. The crucial factors and mechanism of the cyclization were explored. Thermal decomposition, mechanical sensitivity and the purity of the LLM-105 were determined by TG-DTA, an impact sensitivity instrument and high performance liquid chromatography (HPLC) respectively. The results showed that LLM-105 synthesised via 2,6-diamino-3,5-dinitropyrazine (ANPZ) was less sensitive to impact, but the LLM-105 synthesized by the new method had some obvious advantages in terms of purity, security and production costs. Moreover, the LLM-105 synthesized by this new method can be initiated reliably without recrystallization.
Źródło:
Central European Journal of Energetic Materials; 2016, 13, 1; 21-32
1733-7178
Pojawia się w:
Central European Journal of Energetic Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Synthesis and Theoretical Studies of a New High Explosive, N,N,-Bis(3-aminofurazan-4-yl)-4,4´-diamino- 2,2´,3,3´,5,5´,6,6´-octanitroazobenzene
Autorzy:
Jing, S.
Liu, Y.
Liu, D.
Guo, J.
Powiązania:
https://bibliotekanauki.pl/articles/358642.pdf
Data publikacji:
2015
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Przemysłu Organicznego
Tematy:
BAFDAONAB
density functional theory
detonation properties
Opis:
A new high energy, low sensitivity material N,N,-bis(3-aminofurazan- 4-yl)-4,4´-diamino-2,2´,3,3´,5,5´,6,6´-octanitroazobenzene (BAFDAONAB) was synthesized from 4-chlorobenzoic acid and diaminofurazan. The structure of BAFDAONAB was characterized by FT-IR, NMR and Elemental Analyses and its purity was determined by HPLC. The optimized structure and thermodynamic parameters were obtained at the DFT- B3LYP/6-31+G** theoretical level. Its detonation properties were also predicted by the formulae of Kamlet-Jacobs and the Monte-Carlo method. The results show that the density, heat of formation, detonation velocity, detonation pressure, impact sensitivity and purity were 1.93 g/cm3, 4487.44 kJ/mol, 9.01 km/s, 35.03 GPa, 63 cm and 99.3%, respectively. In addition, the compound was an insensitive high explosive which could meet the requirements of high energetic materials.
Źródło:
Central European Journal of Energetic Materials; 2015, 12, 4; 745-755
1733-7178
Pojawia się w:
Central European Journal of Energetic Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Investigation on Irreversible Expansion of 1,3,5-Triamino-2,4,6-trinitrobenzene Cylinder
Autorzy:
Sun, J.
Kang, B.
Zhang, H.
Liu, Y.
Xia, Y.
Yao, Y.
Liu, X.
Powiązania:
https://bibliotekanauki.pl/articles/357936.pdf
Data publikacji:
2011
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Przemysłu Organicznego
Tematy:
TATB
irreversible expansion
XRD
lattice parameters
Opis:
In this study, the irreversible expansion of TATB cylinder is investigated. No evident variation of the lattice parameters is observed on TATB crystal. The density of TATB powder decreases by only about 0.02% after it suffered from thermal cycling process at the range from -54 C to 74 C, while the density of TATB cylinder decreases by about 1.0%. It is suggested that the density variation of TATB powder has little contribution to the density decrease of TATB cylinder. Therefore, the increasing interstices between TATB powder originated from the thermal cycling should be responsible to the irreversible expansion of TATB cylinder.
Źródło:
Central European Journal of Energetic Materials; 2011, 8, 1; 69-79
1733-7178
Pojawia się w:
Central European Journal of Energetic Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Factors Affecting the Measurement of the Percentage of Gaseous Products from Boron-based Fuel-rich Propellants
Autorzy:
Liu, L.-L.
He, G.-Q.
Wang, Y.-H.
Liu, P.-J.
Powiązania:
https://bibliotekanauki.pl/articles/358720.pdf
Data publikacji:
2014
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Przemysłu Organicznego
Tematy:
fuel-rich propellant
percentage gaseous products
combustion
filter media
Opis:
Acid-washed asbestos, carbon fibre, and MgO with carbon fibre were used as the filter media in order to compare their filtering qualities in the estimation of the percentage of gaseous products (PGP) arising from the combustion of singlebase propellants, double-base propellants, and boron-based fuel-rich propellants. The comparison was based on an analysis of the experimentally registered influence of the propellant formulation, the propellant load, the maximum chamber pressure and the thickness of the MgO filter layer on the PGP from the fuel-rich propellant, and in particular on the PGP produced by combustion of boron-based fuel-rich propellant. The results showed that the experimental values of the PGP were closer to the theoretically predicted values when carbon fibre mixed with MgO powder was used as the filter medium. The PGP of boron-based fuel-rich propellant increased when the AP was in part replaced by HMX, when the AP content was increased and when boron was in part replaced by magnesium-aluminum alloy. In terms of the apparatus used in these experiments, the propellant loading density was found to have little correspondence with the PGP for boron-based fuel-rich propellant. The optimal propellant loading density for the chamber volume of 85 cm3 was found to be 2-2.5 g, in view of the reliability and safety of the experiment. It is emphasised that the thickness of the MgO filter layer is very important for the accuracy and reliability of the experiment, and that the optimum should be determined by experiment.
Źródło:
Central European Journal of Energetic Materials; 2014, 11, 1; 15-29
1733-7178
Pojawia się w:
Central European Journal of Energetic Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
System and Method for Simultaneous Measurement of Nitrogen Content and Uniformity of Nitration of Nitrocellulose
Autorzy:
Liu, Y.
Shao, Z.
Wang, W.
Li, W.
Lv, Y.
Sun, J.
Powiązania:
https://bibliotekanauki.pl/articles/358714.pdf
Data publikacji:
2018
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Przemysłu Organicznego
Tematy:
nitrocellulose
uniformity of nitration
nitrogen content
mixed acid nitration
cotton maturity
Opis:
Nitrocellulose (NC) is a common, commercially available, cellulosederived material and has been functionalized and widely applied in microfluidic technology, immunoassays and biochemical analyses. However, existing testing parameters always fail to completely and accurately reflect its inherent quality. In this study, we have designed and assembled a novel automatic polarizing microscope test system (PMTS) to scientifically test the nitrogen content and uniformity of nitration of NC based on the chromogenic principle of a polarization microscope. The advantages of this system are: (i) the PMTS requires less sample (only a few micrograms); (ii) the test period is shorter and the results can be obtained within 20 min; (iii) the method belongs to the nondestructive testing group, and the NC sample is not burned, dissolved, or damaged; and (iv) this method has increased accuracy, and the deviation of the nitrogen content is less than ±0.05%. The properties of various NC samples prepared by different nitricsulfuric acid systems from raw materials with diverse maturities were determined via PMTS. Five NC samples with different nitrogen contents (10.9%, 11.5%, 11.8%, 12.6% and 13.5%) were tested, and the variance of the corresponding uniformity of nitration of these samples were 3.17, 1.61, 1.15, 1.76, and 2.83. The uniformity of nitration initially decreased and then increased with increasing nitrogen content, and the best uniformity of nitration appeared at a nitrogen content of 12%. We also found that fibre maturity has a positive effect on the uniformity of nitration. This testing device and method, with its cost-effectiveness and field-portability, can significantly improve the accuracy of nitration content and uniformity, and has an important value in practical applications.
Źródło:
Central European Journal of Energetic Materials; 2018, 15, 4; 554-571
1733-7178
Pojawia się w:
Central European Journal of Energetic Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Toluene Mono-nitration in a Semi-batch Reactor
Autorzy:
Chen, L. P.
Chen, W. P.
Liu, Y.
Peng, J. H.
Liu, R. H.
Powiązania:
https://bibliotekanauki.pl/articles/358853.pdf
Data publikacji:
2008
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Przemysłu Organicznego
Tematy:
toluene mono-nitration
apparent activation energy
semi-batch reaction
thermal hazard
Opis:
Toluene mono-nitration in a semi-batch reactor was investigated with reaction calorimeter (RC1). The mixed acid HNO3/H2SO4/H2O (wt%) was used in proportion 13/66/21, which is similar to industrial parameters. The exothermic rates at different reaction temperatures were compared, and then the curves of heat generation rate after dosing were analyzed. The Maximal Temperature attainable by runaway of the desired Synthetic Reaction (MTSR) under different conditions were calculated for the course hazard evaluation. The results showed that the average reaction heat of mono-nitration was between 169.07~177.11 kJ mol-1, and the special heat of reactant was about 2 kJ kg-1 K-1. Average Ea of second order kinetic was about 30 kJ mol-1, and reaction rate was 10-4 mol s-1 l-1 order of magnitude when the strength of sulphuric acid was about 73.5%. It was also found that when temperature or stirring speed increases, the potential heat accumulation decreases.
Źródło:
Central European Journal of Energetic Materials; 2008, 5, 2; 37-47
1733-7178
Pojawia się w:
Central European Journal of Energetic Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Experimental Study of the Explosion of Aluminized Explosives in Air
Autorzy:
Chen, Y.
Xu, S.
Wu, D. J.
Liu, D. B.
Powiązania:
https://bibliotekanauki.pl/articles/358676.pdf
Data publikacji:
2016
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Przemysłu Organicznego
Tematy:
explosion in air
aluminized explosives
boron powders
TNT equivalence
fireballs
Opis:
Piezoelectric gauges were used to measure the shock wave overpressure of aluminized explosives and of a TNT charge. An infrared thermal-imaging spectrometer was used to collect the infrared signatures produced by the explosion fireball when the examined explosives were detonated. The measurement of the infrared signatures was used to estimate the surface temperatures and the dimensions of the fireball. Two aluminized explosive compositions (RDX/Al/AP and RDX/Al/B/AP) have been analyzed. 500 g charges of the aluminized explosives were prepared and studied, and their TNT equivalences were calculated according to the experimental data and the explosion law. The highest surface temperatures of the fireballs of these aluminized explosives were up to 1600 °C, which was higher than that of the TNT charge. In the region of the highest surface temperature above 700 °C, the duration for the composition RDX/Al/AP was about 232 ms (2.73 times more than TNT), whilst RDX/Al/B/AP was about 360 ms. The fireballs obtained from the explosion of these aluminized explosives had larger dimensions than that of TNT, especially when the surface temperature was above 1000 °C. The test results indicate that the addition of boron powders to aluminized explosives is a good way to enhance their blast effect, to improve the temperature of the explosion field and to prolong the duration of the higher temperature.
Źródło:
Central European Journal of Energetic Materials; 2016, 13, 1; 117-134
1733-7178
Pojawia się w:
Central European Journal of Energetic Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Thermally Induced Polymorphic Transformation of Hexanitrohexaazaisowurtzitane (HNIW) Investigated by in-situ X-ray Powder Diffraction
Autorzy:
Liu, Y.
Li, S.
Wang, Z.
Xu, J.
Sun, J.
Huang, H.
Powiązania:
https://bibliotekanauki.pl/articles/358065.pdf
Data publikacji:
2016
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Przemysłu Organicznego
Tematy:
HNIW
polymorphism
in situ X-ray diffraction
phase transition
heat stimulation
Opis:
The ε→γ phase transition of HNIW induced by heat was investigated with in situ X-ray powder diffraction (PXRD). The effects of purity, particle size, insensitive additives and the time of isothermal heat treatment on the phase transition were evaluated. It was found that the phase transition is irreversible with changes in temperature, and the two phases can coexist in a certain temperature range. Moreover, the initial phase transition temperature increases with increasing purity and decreasing particle size of HNIW, and thus with the approximate crystal density. The addition of graphite and paraffin wax to HNIW as insensitive additives leads to a decrease in the initial phase transition temperature, but the addition of TATB does not affect the initial phase transition temperature. Thus, TATB is a suitable insensitive additive. Moreover, at the critical temperature, the isothermal time determined the efficiency of the ε- to γ-phase transition. This work lays the foundations for the choice of molding technologies, performance test methods, ammunition storage options, as well as the manufacture of HNIW-based explosive formulations.
Źródło:
Central European Journal of Energetic Materials; 2016, 13, 4; 1023-1037
1733-7178
Pojawia się w:
Central European Journal of Energetic Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Synthesis and Theoretical Studies of a New Insensitive Explosive, 2’-Methyl-3-nitro-2’H-[1,3’-bi(1,2,4-triazole)]-5,5’-diamine
Autorzy:
Luo, J.
Liu, Y.
Wang, J.
Chai, T.
Yuan, J.
Chang, S.
Yu, Y.
Jing, S.
Ma, H.
Powiązania:
https://bibliotekanauki.pl/articles/358633.pdf
Data publikacji:
2017
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Przemysłu Organicznego
Tematy:
insensitive explosive
synthesis
theoretical studies
density functional theory
new 1,2,4-triazole derivative
Opis:
A new insensitive energetic material 2’-methyl-3-nitro-2’H-[1,3’-bi(1,2,4-triazole)]-5,5’-diamine (1) was prepared by a three-step synthesis from commercially available chemicals. The energetic title compound was comprehensively characterized by various means, including FT-IR, multinuclear (1H, 13C, 14N) NMR spectroscopy, elemental analysis, HPLC and thermal analysis. The sensitivities of the synthesized material towards various external stimuli (impact, friction) were determined according to the BAM method. The optimized structure and related thermodynamic parameters were obtained at the DFT-B3LYP/6-31+G** theoretical level. The detonation properties of the material were also predicted according to the Kamlet-Jacobs formulae and the Monte-Carlo method. The results show that the density, heat of formation, detonation velocity, detonation pressure, impact sensitivity and purity were 1.83 g/cm3, 369 kJ/mol, 7.52 km/s, 25.4 GPa, 82.3 J and 97.7%, respectively. In addition, the compound was an insensitive high explosive which could meet the requirements of high energetic materials.
Źródło:
Central European Journal of Energetic Materials; 2017, 14, 2; 269-280
1733-7178
Pojawia się w:
Central European Journal of Energetic Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Coating of LiBH4 and Its Effect on the Decomposition of RDX and AP
Autorzy:
Ding, X.
Shu, Y.
Chen, Z.
Liu, N.
Gou, B.
Zhang, J.
Wu, M.
Xie, G.
Dang, T.
Powiązania:
https://bibliotekanauki.pl/articles/358086.pdf
Data publikacji:
2017
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Przemysłu Organicznego
Tematy:
coating
hydride
additive
hygroscopicity
DSC
Opis:
The novel fuel additive LiBH4 was introduced as an energetic component for its outstanding hydrogen content, perfect burning performance and high reactivity. In order to limit the hygroscopicity and to improve the stability in the air, LiBH4 was coated on the surface with wax and polyester carbonate. The final product was characterized by scanning electron microscopy (SEM), X-ray photoelectron energy spectroscopy (XPS) and Raman spectroscopy, while the stability in air was investigated by regular checking of variations in weight. The results show that a uniform coating layer was formed on the surface of the LiBH4, and the coverage was estimated from the boron content as approximately 82%. A healing effect was confirmed on defective surfaces exposed to air; the coating layer improves the relative stability by 50.7%. Furthermore, LiBH4 as an additive to promote the thermal decomposition of 1,3,5-trinitro-1,3,5-trazinane (RDX) and ammonium perchlorate (AP) was explored by differential scanning calorimetry (DSC), in which the catalytic effects of pure LiBH4 and coated LiBH4 were compared, and indicated that the coating does not decrease the reactivity of LiBH4. It is suggested that surface coating with some inert materials is a simple and effective method for improving the storage and performance of LiBH4, while ensuring its reactivity.
Źródło:
Central European Journal of Energetic Materials; 2017, 14, 1; 134-151
1733-7178
Pojawia się w:
Central European Journal of Energetic Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The Microstructural Evolution in HMX Based Plastic-bonded Explosive During Heating and Cooling Process: an in situ Small-angle Scattering Study
Autorzy:
Yan, G.
Tian, Q.
Liu, J.
Fan, Z.
Sun, G.
Zhang, C.
Wang, Y.
Chen, B.
Gong, J.
Zhou, X.
Yang, Z.
Nie, F.
Li, J.
Li, X.
Powiązania:
https://bibliotekanauki.pl/articles/358618.pdf
Data publikacji:
2016
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Przemysłu Organicznego
Tematy:
SANS
SAXS
HMX-PBX
thermal damages
phase transition
Opis:
The thermal damage in octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine (HMX) based plastic-bonded explosive (PBX) was investigated using in situ small-angle neutron and X-ray scattering techniques. The microstructural evolution was quantitatively characterized by the model fitting parameters of total interfacial surface area (Sv) and void volume distribution. The Sv of HMX-PBX decreased markedly above 100 °C, indicating the movement of binder into the voids. After subsequent cooling to room temperature, the scattering intensity increased significantly with increasing storage time, and a new population of voids with average diameter of 20 nm was observed, accompanied by the gradual phase transition of HMX from δ- to β-phase. The experimental results implied that serious damage within the HMX-PBX was developed during storage after heating.
Źródło:
Central European Journal of Energetic Materials; 2016, 13, 4; 916-926
1733-7178
Pojawia się w:
Central European Journal of Energetic Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-11 z 11

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies