Temat: Recycling - Katalog OPAC zbiorów

Skocz do pozycji: 1.

Tytuł:: Review of the Thermochemical Degradation of PET: An Alternative Method of Recycling
Autorzy:: Cruz, José Nolasco
Martínez, Karla Donjuan
Zavariz, Álvaro Daniel
Hernández, Irma Pérez
Powiązania:: https://bibliotekanauki.pl/articles/2173350.pdf
Data publikacji:: 2022
Wydawca:: Polskie Towarzystwo Inżynierii Ekologicznej
Tematy:: thermal degradation
PET
polyethylene terephthalate
recycling
Opis:: Plastics play an important role in our lives due to their versatility, lightness and low production cost. They can be found in almost every industry such as automotive, construction, packaging, medical, and engineering applications among others. Polyethylene terephthalate (PET) is one of the most consumed plastics worldwide in the packaging sector, which is why its useful life is usually very short, causing serious problems due to high disposal in the environment and urban landfills. The thermochemical degradation of PET has been studied by some researchers and it has been found that its degradation products are of high added value, which is why this work focuses on presenting the results obtained in the literature.
Źródło:: Journal of Ecological Engineering; 2022, 23, 9; 319--330
2299-8993
Pojawia się w:: Journal of Ecological Engineering
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 2.

Tytuł:: Quantification of Greenhouse Gas Emissions from Municipal Solid Waste Recycling and Disposal in Malang City Indonesia
Autorzy:: Sunarto, S.
Purwanto, P.
Hadi, S. P.
Powiązania:: https://bibliotekanauki.pl/articles/124949.pdf
Data publikacji:: 2017
Wydawca:: Polskie Towarzystwo Inżynierii Ekologicznej
Tematy:: integrated solid waste management
recycling
GHG emission
Opis:: Increased waste generation due to population growth and increasing consumption patterns cause pollution, including pollution in global scale due to the emission of methane (CH₄) and carbon dioxide (CO₂) from the waste in the landfill. The study purposed to analyze the GHG (Green House Gases) emission generated by solid waste management in Malang in 2012 and in the next 10 years through the application of waste recycling from upstream to downstream. The production of methane (CH₄) in landfill were analyzed using the model equations developed by IPPC (2001) and the reduction of the GHG from recycling were analyzed using GHG emission factors. Dynamic model of the GHG emission was developed to analyze and to predict GHG emission from recycling and dumping activity. The GHG emissions of waste management in 2012 (Scenario 1) is 192,291.19 tCO₂e and in the next 10 years is 254,548.93 tCO₂e (>32.19%). Application of Scenario 2 and Scenario 3 in the next 10 years produces GHG emission 134,290.38 tCO₂e (<30.16%) and 37,741.56 tCO₂e (<80.37%).
Źródło:: Journal of Ecological Engineering; 2017, 18, 3; 74-82
2299-8993
Pojawia się w:: Journal of Ecological Engineering
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 3.

Tytuł:: A Cradle-to-Grave Life Cycle Assessment Study on a New Countertop Material
Autorzy:: Silva, Luiza Fernandes Carneiro
Silva, Maria Elisabete
Brás, Isabel
Domingos, Idalina
Wessel, Dulcineia
Ferreira, José Vicente
Powiązania:: https://bibliotekanauki.pl/articles/2028044.pdf
Data publikacji:: 2021
Wydawca:: Polskie Towarzystwo Inżynierii Ekologicznej
Tematy:: circular economy
furniture
life cycle assessment
recycling
Opis:: The life cycle of furniture products has been decreased in the last years as a consequence of the continuous improvement of people’s housing conditions. This behavior increases the waste amount in an urban area. The focus of this study was developing a Life Cycle Assessment (LCA) (cradle-to-grave) of a new countertop product. Two scenarios for countertop waste management were proposed, one considering landfilling and another considering recycling. The functional unit chosen was 1 m2 of finished panel (countertop) and the boundary system involved the study of raw materials, product packaging, the panel production process, the installation process, the panel use, and its end of life. The chosen method for impact assessment was EPD (2018) available in the SimaPro PhD software. The results showed that recycling has a positive effect on the environmental impacts, with the variation ranging from 0.3% on Abiotic Depletion (FF) to 15.9% on Eutrophication. A comparison between the product studied and products with similar functions was also conducted and although this product was not the worst performer, it has a lot of room for improvement.
Źródło:: Journal of Ecological Engineering; 2021, 22, 11; 239-245
2299-8993
Pojawia się w:: Journal of Ecological Engineering
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 4.

Tytuł:: Praktyczne wykorzystanie recyklatów gumowych, jako sposób na ochronę środowiska
Practice use of rubber recyclates, as a way to protect the environment
Autorzy:: Białasz, S.
Powiązania:: https://bibliotekanauki.pl/articles/401749.pdf
Data publikacji:: 2018
Wydawca:: Polskie Towarzystwo Inżynierii Ekologicznej
Tematy:: recykling
opony
odpady gumowe
recycling
tires
waste rubber
Opis:: Praca ta zawiera analizę obecnej wiedzy na temat ponownego wykorzystania odpadów gumowych, zwłaszcza poużytkowych opon samochodowych, w tym sposobu gospodarowania odpadami, metod przetwarzania recyklatów oraz praktycznych zastosowań tego materiału. Opisano sposoby ograniczenia ilości odpadów polimerowych, omówiono materiały i związki chemiczne stanowiące budulec opon oraz zaprezentowano dostępne metody wytwarzania recyklatów gumowych. Ponadto sklasyfikowano rodzaje odpadów gumowych po rozdrobnieniu i przedstawiono przykładowe możliwości ich wykorzystania w przemyśle.
This paper contains an analysis of current knowledge about the reuse of rubber waste, especially post-consumer car tires, including waste management, recycling methods and practical applications of this material. The methods of reducing the amount of polymer waste are described, the materials and chemical constituents constituting the building blocks of the tires are discussed and the available methods of producing rubber recyclates are presented. In addition, the types of rubber waste after fragmentation were classified and examples of their use in industry were presented.
Źródło:: Inżynieria Ekologiczna; 2018, 19, 5; 63-74
2081-139X
2392-0629
Pojawia się w:: Inżynieria Ekologiczna
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 5.

Tytuł:: Use of Sustainable Fine-Grain Aggregates in Cement Composites
Autorzy:: Rucińska, Teresa
Powiązania:: https://bibliotekanauki.pl/articles/952393.pdf
Data publikacji:: 2019
Wydawca:: Polskie Towarzystwo Inżynierii Ekologicznej
Tematy:: cement mortar
mortar sustainable
recycling
aggregates
waste aggregate
Opis:: The previous research and the analyses from various research centers indicate the usefulness of the aggregates obtained from waste in the construction materials technology, although their technical parameters are not always comparable to the properties of traditional materials manufactured on the basis of primary raw materials. However, with a very large variety of expected technical features, these slightly lower parameters may be sufficient for use in engineering facilities. Mortars and concretes are the most popular group of materials, where aggregates obtained from waste can be used without any problems. The presented characteristics of the properties of fine aggregates, which were produced by grinding concrete and ceramic debris, as well as the fragmentation of municipal sewage sludge, in connection with the properties of cement mortars, is a clear example of this. The study showed that the cement mortars, in which natural aggregate was replaced by waste glass with the same granulation, confirmed their usefulness as mortar for building masonry, or underlays for floors. However, the fact that carrying out the process of fragmentation of waste to adequately fine granulation on an industrial scale is highly inconvenient, cannot be omitted. There are no difficulties in obtaining the aggregates with larger grains, which are used in hardening unpaved roads or as a concrete component. Obtaining finer grains of recycled aggregate becomes more challenging. Overcoming this obstacle will make the fine-grained aggregates obtained through the recycling of waste materials a viable alternative to the natural aggregates. This will contribute to the reduction of the extraction of natural sands, and thus to the protection of the natural environment.
Źródło:: Journal of Ecological Engineering; 2019, 20, 10; 102-109
2299-8993
Pojawia się w:: Journal of Ecological Engineering
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 6.

Tytuł:: Evaluation of Traditional Container Glass Recycling Systems against Selected Environmental Impact Criteria Using the LCA Method
Autorzy:: Zegardło, Bartosz
Drużba, Katarzyna
Powiązania:: https://bibliotekanauki.pl/articles/1838294.pdf
Data publikacji:: 2021
Wydawca:: Polskie Towarzystwo Inżynierii Ekologicznej
Tematy:: packaging glass
glass recycling
life cycle assessment
environmental impact
Opis:: The research results presented in this article are an answer to the controversial theses questioning the validity of traditional recycling methods. The voices of scientific circles which have appeared recently indicate that irrational waste management and energy-intensive recycling of selected products bring more harm than benefits to the environment. This paper is devoted to the assessment of selected environmental effects of traditional recycling processes for container glass. The environmental impact of collection, segregation, transport and remelting of glass waste was analysed using the LCA (Life Cycle Assessment) method and available databases. The environmental impact of the processes described was assessed in terms of selected criteria: climate change, energy depletion, air emissions, toxicity and depletion of natural resources. Two methods were used for the calculations: the method of the Institute of Environmental Engineering of Leiden University–CML and the Ecological Scarcity Method (ESM). The calculations were carried out for an exemplary city located in eastern Poland. The study showed that, compared with purely natural glass production, the production of recyclates was more favourable in terms of all the above-mentioned factors. Additional calculations made it possible to estimate the waste transport distance, for which the environmental impact of transporting recyclate to the glassworks made the glass recycling process by re-melting less favourable than the production of packaging from natural resources.
Źródło:: Journal of Ecological Engineering; 2021, 22, 6; 20-25
2299-8993
Pojawia się w:: Journal of Ecological Engineering
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 7.

Tytuł:: Evaluation of Traditional Container Glass Recycling Systems against Selected Environmental Impact Criteria Using the LCA Method
Autorzy:: Zegardło, Bartosz
Drużba, Katarzyna
Powiązania:: https://bibliotekanauki.pl/articles/1838391.pdf
Data publikacji:: 2021
Wydawca:: Polskie Towarzystwo Inżynierii Ekologicznej
Tematy:: packaging glass
glass recycling
life cycle assessment
environmental impact
Opis:: The research results presented in this article are an answer to the controversial theses questioning the validity of traditional recycling methods. The voices of scientific circles which have appeared recently indicate that irrational waste management and energy-intensive recycling of selected products bring more harm than benefits to the environment. This paper is devoted to the assessment of selected environmental effects of traditional recycling processes for container glass. The environmental impact of collection, segregation, transport and remelting of glass waste was analysed using the LCA (Life Cycle Assessment) method and available databases. The environmental impact of the processes described was assessed in terms of selected criteria: climate change, energy depletion, air emissions, toxicity and depletion of natural resources. Two methods were used for the calculations: the method of the Institute of Environmental Engineering of Leiden University–CML and the Ecological Scarcity Method (ESM). The calculations were carried out for an exemplary city located in eastern Poland. The study showed that, compared with purely natural glass production, the production of recyclates was more favourable in terms of all the above-mentioned factors. Additional calculations made it possible to estimate the waste transport distance, for which the environmental impact of transporting recyclate to the glassworks made the glass recycling process by re-melting less favourable than the production of packaging from natural resources.
Źródło:: Journal of Ecological Engineering; 2021, 22, 6; 20-25
2299-8993
Pojawia się w:: Journal of Ecological Engineering
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 8.

Tytuł:: The Phenomenon of Medical Waste Recycling in Indonesia: Contact Time and Chlorine Dose as a Disinfectant with the Bio-Indicator Bacillus subtilis and Bacillus stearothermophilus
Autorzy:: Fikri, Elanda
Kurniati, Iis
Wartiniyati, -
Prijanto, Teguh Budi
Pujiono, -
Syarief, Osman
Khair, Amar Sharaf Eldin
Powiązania:: https://bibliotekanauki.pl/articles/1839585.pdf
Data publikacji:: 2021
Wydawca:: Polskie Towarzystwo Inżynierii Ekologicznej
Tematy:: recycling
medical waste
dosage
duration of contact
chlorine
disinfection
Opis:: Efforts that have been done to manage the Hazardous and Toxic waste into non-Hazardous and Toxic waste are done by emptying, shredding, washing, and rinsing at least 3 times and disinfecting using chlorine. This is in accordance with the Indonesian Regulation of Ministry of Health No. 27 of 2017, which has stated that surface cleaning is permitted to use 0.05% chlorine during the process. Furthermore, in the Indonesian Regulation of the Ministry of Environment and Forestry No.56 of 2015, the chemical disinfection process is permitted to use an additional 3–6% sodium hypochlorite (NaOCl). However, there are still differences in dosage and it has not been mentioned regarding the immersion period during the disinfection process on both of the regulations. The purpose of this study was to determine the difference in contact time and the dose of chlorine as a disinfectant on the number of Bacillus subtilis and Bacillus stearothermophilus in the medical waste recycling process. The research design used in this study was a Randomized Factorial Design with experimental research type. A total of 104 recyclable medical waste samples were taken, using 3 treatments and 6 repetitions. The average temperature of the chlorine solution at the contact time of 15 minutes, 30 minutes, and 45 minutes was 24.34 °C; 24,53 °C; and 24,54 °C respectively, while the average pH of the chlorine solution at the contact time of 15 minutes, 30 minutes, and 45 minutes was 8.344; 8,375; and 8,461 respectively. The results showed that there was no difference in the duration of contact and the dose of chlorine as a disinfectant in the medical waste recycling process with a p-value of 0.377. The percentage reduction in the number of Bacillus subtilis and Bacillus stearothermophilus before and after treatment was 99.99% based on 4 positive controls. The findings in this study were the duration of contact time and the effective dose used in the recycling process of medical waste, which was at a dosage of 0.03% with 45 minutes of contact time. The government needs to conduct a re-assessment regarding the recommended ideal dosage in the surface disinfection process so that it would not cause a potential risk to humans or the environment.
Źródło:: Journal of Ecological Engineering; 2021, 22, 4; 47-58
2299-8993
Pojawia się w:: Journal of Ecological Engineering
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 9.

Tytuł:: Does Composting of Biodegradable Municipal Solid Waste on the Landfill Body Make Sense?
Autorzy:: Adamcová, D.
Vaverková, M.
Powiązania:: https://bibliotekanauki.pl/articles/124897.pdf
Data publikacji:: 2016
Wydawca:: Polskie Towarzystwo Inżynierii Ekologicznej
Tematy:: waste
household waste recycling
phytotoxicity
Sinapis alba
landfill reclamation
Opis:: In this study white mustard (Sinapis alba) plants were allowed to grow in earthen pots, treated with municipal solid waste compost (MSWC) to study the effect of MSWC on the plant biomass production. Twenty-one days from the establishment of the experiment sprouts and the number of growing plants occurring in the earthen pots were counted. Plants growing in the earthen pots with the compost samples exhibited an increasing plant biomass while no changes were observed in their appearance; retarded growth or necrotic changes were not recorded. The performed phytotoxicity tests show that the analyzed composts produced in the composting plant situated on the landfill surface achieved high percentages of the germinating capacity of white mustard (Sinapis alba) seeds and can be therefore used in the subsequent reclamation of the concerned landfill.
Źródło:: Journal of Ecological Engineering; 2016, 17, 1; 30-37
2299-8993
Pojawia się w:: Journal of Ecological Engineering
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 10.

Tytuł:: Simulations of the influence of changes in waste composition on their energetic properties
Autorzy:: Marczak, H.
Powiązania:: https://bibliotekanauki.pl/articles/125099.pdf
Data publikacji:: 2014
Wydawca:: Polskie Towarzystwo Inżynierii Ekologicznej
Tematy:: waste management municipal waste
recycling
calorific value of waste
Opis:: The objective to obtain the recommended (at least 50% by weight) level of recycled and reprocessed raw fractions of municipal waste in the perspective of 2020 might in turn contribute to the deterioration of the fuel properties of waste stream that is intended for incineration. In order to avoid oversizing heat recovery plants their con-struction should be based on well-defined properties of the waste fuel. The author carried out simulation calculations of the impact of changes in the composition of municipal waste on their energetic properties. The calculations of the calorific value of the waste fraction (so called combustible fraction) with the potential to be used as an alternative fuel were done.
Źródło:: Journal of Ecological Engineering; 2014, 15, 4; 90-97
2299-8993
Pojawia się w:: Journal of Ecological Engineering
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 11.

Tytuł:: Kruszywa z recyklingu w budownictwie
The recycled aggregate in construction
Autorzy:: Sadowska-Buraczewska, B.
Powiązania:: https://bibliotekanauki.pl/articles/401842.pdf
Data publikacji:: 2014
Wydawca:: Polskie Towarzystwo Inżynierii Ekologicznej
Tematy:: recykling
środowisko
konstrukcja
badania eksperymentalne
recycling
environment
construction
experimental researches
Opis:: Wykorzystanie ponowne materiału po rozbiórce obiektów budowlanych stało się bardzo popularne i znaczące dla otaczającego nas środowiska. Jednocześnie poprzez ponowne wykorzystanie gruzu budowlanego w betonach chronimy w pewien sposób zasoby naturalne. Oczywiście nie jesteśmy w stanie zastąpić w całości kruszywa naturalnego kruszywem z recyklingu w mieszance betonowej, ale przynajmniej w jego większej części. Przedstawiona praca zawiera badania eksperymentalne z wykorzystaniem wysokowartościowego kruszywa z recyklingu w elementach konstrukcji.
Using construction and demolition debris as a substitute for natural aggregate in producing concrete mixtures is gaining more and more supporters because of both economic and ecological reasons. The use of construction and demolition debris means limiting the use of expensive natural aggregate, and thus minimising the negative impact on the natural environment. The maximum benefit is achieved when the biggest possible amount of recycled aggregate is used in the production of concrete. It is to be hoped that the continuous development of technologies in the construction sector will lead to minimising the amount of waste as well as to increasing the number of materials undergoing the recycling process and reused to building new structures.
Źródło:: Inżynieria Ekologiczna; 2014, 40; 74-81
2081-139X
2392-0629
Pojawia się w:: Inżynieria Ekologiczna
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 12.

Tytuł:: Liming of Acidic Soils with Belite Sludge
Autorzy:: Isakov, A. E.
Barygina, K. V.
Powiązania:: https://bibliotekanauki.pl/articles/124174.pdf
Data publikacji:: 2017
Wydawca:: Polskie Towarzystwo Inżynierii Ekologicznej
Tematy:: belite sludge
nepheline sludge
liming
acidic soils
recycling
metallurgical wastes
Opis:: The metallurgical enterprises are a major source of large-tonnage industrial wastes containing valued components. A significant discrepancy between the volumes of waste formations and its utilisation leads to the necessity of large-scale sludge dumping. The article describes a recycling method for belite sludge that is the waste of the alumina production from nepheline concentrate. The physical and chemical properties of belite sludge were analysed and the conclusions about the possibility and outlook of its using as an ameliorant were drown. The main results show that adding the belite sludge to acidic soils provides a certain positive effect. The main conclusions allow to say that belite sludges are an ecologically safe substance that can be used as a liming material for acidic soils.
Źródło:: Journal of Ecological Engineering; 2017, 18, 6; 95-102
2299-8993
Pojawia się w:: Journal of Ecological Engineering
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 13.

Tytuł:: Experience in the Implementation of Drilling Waste Utilization Technology on the Example of a Large Oil and Gas Region of Russia
Autorzy:: Bogdanova, Olga
Okmynskaia, Valentina
Powiązania:: https://bibliotekanauki.pl/articles/2026735.pdf
Data publikacji:: 2022
Wydawca:: Polskie Towarzystwo Inżynierii Ekologicznej
Tematy:: drilling waste
safe disposal
inert
building material
environmental conservation
waste recycling
Opis:: The oil industry is characterized by an intense impact on the environment, which inevitably causes its change. In the production process, the existing state of the environment in the territories of industrial facilities is completely or partially disturbed. Today, the result of the negative environmental impact of the fuel and energy industry on the nature of the regions of northern Russia has resulted in millions of tons of drilling and oil production waste stored in sludge pits and causing colossal damage to the atmosphere, hydro- and lithosphere of the country’s oil-producing territories. The aim of this work is to improve the technological process of utilization of drilling waste in the fields with the receipt of an inert building material that does not have a negative impact on the components of the natural environment. In the course of work, based on the analysis of the proposed disposal methods, the most optimal option was selected and a technology for disposal of drilling waste at an oil field was developed, a situational map of the object was presented, and an estimate of the cost of the proposed disposal technology was carried out. Based on the results of the work carried out, a conclusion was made about the effectiveness of the utilization technology under consideration, since it was revealed a decrease in the amount of generated and accumulated waste, a decrease in the costs of maintaining and reclamation of waste accumulation / disposal facilities.
Źródło:: Journal of Ecological Engineering; 2022, 23, 2; 132-139
2299-8993
Pojawia się w:: Journal of Ecological Engineering
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 14.

Tytuł:: Lead Exposure in Trader Communities in Industrial Area of the Battery Recycling Plant: Tangerang, Indonesia
Autorzy:: Oginawati, Katharina
Sidhi, Rifan
Susetyo, Septian Hadi
Powiązania:: https://bibliotekanauki.pl/articles/123452.pdf
Data publikacji:: 2020
Wydawca:: Polskie Towarzystwo Inżynierii Ekologicznej
Tematy:: lead exposure
urine lead
risk assessment
heavy metal
battery recycling plant
Opis:: The aim of this study was to look at the risk of community around the battery recycling plant in terms of the exposure to lead dust. The number of respondents amounted to 60 people from an industrial area and a residential area. The sample of the industrial area included 30 respondents with a composition of 15 men and 15 women. The same number of respondents was also examined in the residential area as a control area, located 5 km from the industrial area. Respirable dust was measured using a personal dust sampler, the concentration of lead in dust was measured using GF-AAS, while as a biomarker of exposure, the lead content in urine was measured using GF-AAS. The average values for respirable lead in industrial and residential areas are 0.92 μg/m³ and 0.92–1.34 μg/m³. The analysis of the lead content in urine for the industrial and residential areas produced an average value of 119 ppb and 123 ppb. The average value of HI for the lead exposure on the industrial and residential areas are in danger (HI > 1) which is 3.6 ± 1.94 and 2.18 ± 1.49. The OR values for the respondents in the industrial area compared to the residential areas amounting to 1.17 for the category of HI lead exposure and 1.22 for the category of lead in urine.
Źródło:: Journal of Ecological Engineering; 2020, 21, 4; 264-270
2299-8993
Pojawia się w:: Journal of Ecological Engineering
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 15.

Tytuł:: Design of a Rules-Based Recommendation System Implemented in Prolog for the Management of Electronic Waste from ICT
Autorzy:: Dallos Parra, David Leonardo
Carvajal Camargo, Maryury Julieth
Sánchez Céspedes, Juan Manuel
Powiązania:: https://bibliotekanauki.pl/articles/2027979.pdf
Data publikacji:: 2021
Wydawca:: Polskie Towarzystwo Inżynierii Ekologicznej
Tematy:: electronic waste
recycling
rule-based system
information and communication technologies
Prolog
Opis:: Electronic waste generated from Information and Communication Technologies (ICT) has become a global issue as this represents a negative impact on both environment and human health. Consequently, it is noticeably useful to develop tools to soften such impact. Therefore, this article presents a rules-based system implemented in Prolog aiming at guiding ICT devices users towards good practices on electronic waste management to diminish the negative impact. The methodologies employed include exploratory, descriptive, and experimental. Even though the system developed in Prolog was found to be deficient with user interface, it is also functional and efficient, including features like usability and maintainability. In conclusion, it was found that waste recollection systems may be useful for both environmental management processes in different countries and also positive business opportunities.
Źródło:: Journal of Ecological Engineering; 2021, 22, 11; 104-113
2299-8993
Pojawia się w:: Journal of Ecological Engineering
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Informacja

Wyszukujesz frazę "Recycling" wg kryterium: Temat

Źródło danych

Dostawca treści

Kolekcja

Rok wydania

Wydawca

Temat

Autor

Typ dokumentu

Język