Temat: storage system - Katalog OPAC zbiorów

Skocz do pozycji: 1.

Tytuł:: Energy storage systems: power grid and energy market use cases
Autorzy:: Komarnicki, P.
Powiązania:: https://bibliotekanauki.pl/articles/141507.pdf
Data publikacji:: 2016
Wydawca:: Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:: storage technologies
storage system sizing
storage system operation
storage system management
storage system use case scenarios
storage system integration
Opis:: Current power grid and market development, characterized by large growth of distributed energy sources in recent years, especially in Europa, are according energy storage systems an increasingly larger field of implementation. Existing storage technologies, e.g. pumped-storage power plants, have to be upgraded and extended by new but not yet commercially viable technologies (e.g. batteries or adiabatic compressed air energy storage) that meet expected demands. Optimal sizing of storage systems and technically and economically optimal operating strategies are the major challenges to the integration of such systems in the future smart grid. This paper surveys firstly the literature on the latest niche applications. Then, potential new use case and operating scenarios for energy storage systems in smart grids, which have been field tested, are presented and discussed and subsequently assessed technically and economically.
Źródło:: Archives of Electrical Engineering; 2016, 65, 3; 495-511
1427-4221
2300-2506
Pojawia się w:: Archives of Electrical Engineering
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 2.

Tytuł:: Cost comparison of different configurations of a hybrid energy storage system with battery-only and supercapacitor-only storage in an electric city bus
Autorzy:: Wieczorek, M.
Lewandowski, M.
Jefimowski, W.
Powiązania:: https://bibliotekanauki.pl/articles/202451.pdf
Data publikacji:: 2019
Wydawca:: Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:: hybrid energy storage system
electric bus
battery buses
supercapacitor bus
energy storage system cost
HESS cost comparison
Opis:: This paper proposes four different cost-effective configurations of a hybrid energy storage system (HESS) in an electric city bus. A comparison is presented between a battery powered bus (battery bus) and supercapacitor powered bus in two configurations in terms of initial and operational costs. The lithium iron phosphate (LFP) battery type was used in the battery bus and three of the hybrids. In the first hybrid the battery module was the same size as in the battery bus, in the second it was half the size and in the third it was one third the size. The fourth hybrid used a lithium nickel manganese cobalt oxide (NMC) battery type with the same energy as the LFP battery module in the battery bus. The model of LFP battery degradation is used in the calculation of its lifetime range and operational costs. For the NMC battery and supercapacitor, the manufacturers’ data have been adopted. The results show that it is profitable to use HESS in an electric city bus from both the producer and consumer point of view. The reduction of battery size and added supercapacitor module generates up to a 36% reduction of the initial energy storage system (ESS) price and up to a 29% reduction of operational costs when compared to the battery ESS. By using an NMC battery type in HESS, it is possible to reduce operational costs by up to 50% compared to an LFP battery ESS.
Źródło:: Bulletin of the Polish Academy of Sciences. Technical Sciences; 2019, 67, 6; 1095-1106
0239-7528
Pojawia się w:: Bulletin of the Polish Academy of Sciences. Technical Sciences
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 3.

Tytuł:: Study on carbon dioxide thermodynamic behavior for the purpose of shale rock fracturing
Autorzy:: Niezgoda, T.
Miedzińska, D.
Małek, E.
Kędzierski, P.
Sławiński, G.
Powiązania:: https://bibliotekanauki.pl/articles/201878.pdf
Data publikacji:: 2013
Wydawca:: Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:: carbon dioxide
shale gas
storage system
thermodynamics
FEM
Opis:: The possibility of using CO2 to fracturing a shale rock has been presented in the paper. The described innovative method which allows for the efficient extraction of shale gas and carbon dioxide storage in a shale rock was developed in Department of Mechanics and Applied Computer Science at the Military University of Technology, Warsaw, Poland. Firstly, the method was verified on the base of analytical and experimental research. In the next stage of the method verification carbon dioxide thermodynamic behavior was studied. The growth in pressure of drop of CO2 heated in a closed volume was numerically tested. The research confirmed the efficiency of the use of carbon dioxide as a medium for fracturing of rocks. The usage of liquid CO2 can be alternative for hydraulic fracturing and is safe for the environment.
Źródło:: Bulletin of the Polish Academy of Sciences. Technical Sciences; 2013, 61, 3; 605-612
0239-7528
Pojawia się w:: Bulletin of the Polish Academy of Sciences. Technical Sciences
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 4.

Tytuł:: Flywheel energy storage control system with the system operating status control via the Internet
Autorzy:: Baszyński, M.
Siostrzonek, T.
Powiązania:: https://bibliotekanauki.pl/articles/141074.pdf
Data publikacji:: 2014
Wydawca:: Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:: BLDCPM
high speed drive
flywheel energy storage system
FPGA
Opis:: Modern electronics systems consist of not only with the power electronics converters, but also with the friendly user interface which allow you to read the operating parameters and change them. The simplest solution of the user interface is to use alphanumeric display which displays information about the state of the converter. With a few additional buttons you can change the settings. This solution is simple, inexpensive but allows only local control (within walking distance from the system) and the number of displayed information is low. You can create extensive menu, but it causes problems with access to information. This paper presents the example of a rotating energy storage universal solution which is lack of the above mentioned disadvantages.
Źródło:: Archives of Electrical Engineering; 2014, 63, 3; 457-467
1427-4221
2300-2506
Pojawia się w:: Archives of Electrical Engineering
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 5.

Tytuł:: Electromechanical transient modeling of energy storage based on virtual synchronous machine technology
Autorzy:: Cui, Juntao
Li, Zhao
He, Ping
Gong, Zhijie
Dong, Jie
Powiązania:: https://bibliotekanauki.pl/articles/2135738.pdf
Data publikacji:: 2022
Wydawca:: Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:: battery energy storage system
electromechanical transient model
virtual synchronous machine
Opis:: This paper proposes an electromechanical transient method to build a battery energy storage system-based virtual synchronous generator model, suitable for a large-scale grid. This model consists of virtual synchronous generator control, system limitation and the model interface. The equations of a second-order synchronous machine, the characteristics of charging/discharging power, state of charge, operating efficiency, dead band and inverter limits are also considered. By equipping the energy storage converter into an approximate synchronous voltage source with an excitation system and speed regulation system, the necessary inertia and damping characteristics are provided for the renewable energy power system with low inertia and weak damping. Based on the node current injection method by the power system analysis software package (PSASP), the control model is built to study the influence of different energy storage systems. A study on the impact of renewable energy unit fluctuation on frequency and the active power of the IEEE 4-machine 2-area system is selected for simulation verification. Through reasonable control and flexible allocation of energy storage plants, a stable and friendly frequency environment can be created for power systems with high-penetration renewable energy.
Źródło:: Archives of Electrical Engineering; 2022, 71, 3; 581--599
1427-4221
2300-2506
Pojawia się w:: Archives of Electrical Engineering
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 6.

Tytuł:: A Robust Control Strategy for Microgrid Energy Using Fuzzy Logic
Autorzy:: Meliani, Meryem
El Barkany, Abdellah
El Abbassi, Ikram
Absi, Rafik
Jeffali, Faouaz
Powiązania:: https://bibliotekanauki.pl/articles/2201185.pdf
Data publikacji:: 2023
Wydawca:: Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:: energy control
renewable energy sources
fuzzy logic system
microgrid
storage system
smart grid
Opis:: This paper highlights the storage charging and discharging issue. The study objective is to manage the energy inputs and outputs of the principal grid at the same time in order to maximize profit while decreasing costs, as well as to ensure the availability of energy according to demand and the decisions to either save or search for energy. A fuzzy logic control model is applied in MATLAB Simulink to deal with the system’s uncertainties in scheduling the storage battery technology and the charging- discharging. The results proved that the fuzzy logic model has the potential to efficiently lower fluctuations and prolong the lifecycle.
Źródło:: Management and Production Engineering Review; 2023, 14, 1; 127--136
2080-8208
2082-1344
Pojawia się w:: Management and Production Engineering Review
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 7.

Tytuł:: Determining the mechanical losses in a high-speed motor on the ex ample of a flywheel energy storage system
Autorzy:: Baszyński, M.
Piróg, S.
Powiązania:: https://bibliotekanauki.pl/articles/141244.pdf
Data publikacji:: 2012
Wydawca:: Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:: FPGA
szybki napęd
BLDCPM
high speed drive
flywheel energy storage system
Opis:: Department of Electrical Drive and Industrial Equipment University of Science and Technology (AGH) The article describes the method of determining mechanical losses and electromagnetic motor torque on the example of a flywheel energy storage system utilizing BLDC motor. The description of the test stand contains: the topology of power factor correction boost rectifier, an inverter supplying the BLDC motor, and the measuring system. The detailed experimental results are included in the paper.
Źródło:: Archives of Electrical Engineering; 2012, 61, 3; 299-313
1427-4221
2300-2506
Pojawia się w:: Archives of Electrical Engineering
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 8.

Tytuł:: Towards development of a prototype high-temperature latent heat storage unit as an element of a RES-based energy system (part 1)
Autorzy:: Bogucka-Bykuć, K.
Włosiński, W.
Bykuć, S.
Powiązania:: https://bibliotekanauki.pl/articles/201522.pdf
Data publikacji:: 2014
Wydawca:: Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:: latent heat storage
LHS
thermal energy storage system
TESS
phase change material
PCM
renewable energy sources
RES
Opis:: This paper presents briefly the state of the art literature review with respect to research in the field of latent heat storage systems as elements of heat only, power only or combined heat and power (CHP) plants utilizing renewable energy sources (RES) for residential applications. Next, a paper introduces initial research carried out in IMP PAN in Gdańsk, Poland, aimed at development of a prototype latent heat storage unit. Identification of the suggested application for the storage unit in a given system is presented. The first stage of development of a prototype heat storage unit, namely a process of PCM pre-selection is discussed.
Źródło:: Bulletin of the Polish Academy of Sciences. Technical Sciences; 2014, 62, 3; 489-494
0239-7528
Pojawia się w:: Bulletin of the Polish Academy of Sciences. Technical Sciences
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 9.

Tytuł:: Analysis of the reliability of photovoltaic-microwind based hybrid power system with battery storage for optimized electricity generation at Tlemcen, north west Algeria
Autorzy:: Hadjidj, Mohammed Salim
Bibi-Triki, Nacereddine
Didi, Faouzi
Powiązania:: https://bibliotekanauki.pl/articles/240901.pdf
Data publikacji:: 2019
Wydawca:: Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:: modeling
optimization
simulation
photovoltaic system
wind system
hybrid photovoltaic-wind-storage system
sizing
modelowanie
optymalizacja
symulacja
system fotowoltaiczny
wymiarowanie
Opis:: This article considers designing of a renewable electrical power generation system for self-contained homes away from conventional grids. A model based on a technique for the analysis and evaluation of two solar and wind energy sources, electrochemical storage and charging of a housing area is introduced into a simulation and calculation program that aims to decide, based on the optimized results, on electrical energy production system coupled or separated from the two sources mentioned above that must be able to ensure a continuous energy balance at any time of the day. Such system is the most cost-effective among the systems found. The wind system adopted in the study is of the low starting speed that meets the criteria of low winds in the selected region under study unlike the adequate solar resource, which will lead to an examination of its feasibility and profitability to compensate for the inactivity of photovoltaic panels in periods of no sunlight. That is a system with fewer photovoltaic panels and storage batteries whereby these should return a full day of autonomy. Two configurations are selected and discussed. The first is composed of photovoltaic panels and storage batteries and the other includes the addition of a wind system in combination with the photovoltaic system with storage but at a higher investment cost than the first. Consequently, this result proves that is preferable to opt for a purely photovoltaic system supported by the storage in this type of site and invalidates the interest of adding micro wind turbines adapted to sites with low wind resources.
Źródło:: Archives of Thermodynamics; 2019, 40, 1; 161-185
1231-0956
2083-6023
Pojawia się w:: Archives of Thermodynamics
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 10.

Tytuł:: A layered compensation optimization strategy of energy storage type railway power conditioner
Autorzy:: Wang, Ying
He, Yianqiang
Chen, Xiaoqiang
Zhao, Miaomiao
Xie, Jing
Powiązania:: https://bibliotekanauki.pl/articles/2042792.pdf
Data publikacji:: 2022
Wydawca:: Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:: electrified railway
energy storage system
negative sequential governance
railway power conditioner
regenerative braking energy
Opis:: Aiming at the problems of the negative sequence governance and regenerative braking energy utilization of electrified railways a layered compensation optimization strategy considering the power flow of energy storage systems was proposed based on the railway power conditioner. The paper introduces the topology of the energy storage type railway power conditioner and analyzes its negative sequence compensation and regenerative braking energy utilization mechanism considering the influence of equipment capacity and power flow of the energy storage system on railway power conditioner compensation effect, the objective function and constraint conditions of the layered compensation optimization of the energy storage type railway power conditioner were constructed and the sequential quadratic programming method was used to solve the problem. The feasibility of the proposed strategy is verified by a multicondition simulation test. The results show that the proposed optimization compensation strategy can realize negative sequence compensation and regenerative braking energy utilization, improve the power factor of traction substations when the system equipment capacity is limited and it also has good realtime performance.
Źródło:: Archives of Electrical Engineering; 2022, 71, 1; 5-20
1427-4221
2300-2506
Pojawia się w:: Archives of Electrical Engineering
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 11.

Tytuł:: Investigation and simulation based optimization of an energy storage system with pressurized air
Autorzy:: Hübner, Dirk Herbert
Grün, Sebastian
Molter, Jan
Powiązania:: https://bibliotekanauki.pl/articles/1955053.pdf
Data publikacji:: 2021
Wydawca:: Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:: renewable energy
pressurized air
storage system
efficiency study
simulation based investigation
simulation based optimization
Opis:: As a central goal of the energy transition in Germany, the share of renewable energies is to be increased to over 80% by 2050. Due to fluctuating wind conditions or the day-night cycle, storage systems must be integrated into the supply grid for a continuous regenerative power supply from wind and solar energy. In addition to pumped storage systems, batteries and Power2Gas approaches, compressed gases (optimally air) can also be used for this purpose. The aim of the research and development project presented is to develop such a storage unit with the best possible efficiency and long service life. To this end, basic calculations were first made on possible efficiencies depending on the assumed changes in the state of the working gas. Furthermore a piston compressor for compressed air generation was investigated experimentally with regard to its efficiency. In addition, the compressor was modelled and simulated in a corresponding software. Thus, on the one hand, the efficiency of the existing piston compressor could be determined experimentally and, on the other hand, the simulation model could be assessed with regard to its suitability for the purpose of simulation-based optimization. Measures to increase efficiency can be derived from the results. In addition, it becomes possible to forecast the achievable overall efficiency of such an energy storage system with compressed air.
Źródło:: Archives of Thermodynamics; 2021, 42, 4; 183-200
1231-0956
2083-6023
Pojawia się w:: Archives of Thermodynamics
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 12.

Tytuł:: An improved air supply scheme for battery energy storage systems
Autorzy:: Xinlong, Zhu
Hong, Shi
Wenbing, Xu
Tong, Zhang
Yansong, Wang
Powiązania:: https://bibliotekanauki.pl/articles/2173643.pdf
Data publikacji:: 2022
Wydawca:: Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:: battery energy storage system
BESS
air cooling duct
baffles
akumulatorowy system magazynowania energii
kanał chłodzący powietrze
przegrody
Opis:: The overall efficiency of battery energy storage systems (BESSs) strongly depends on the temperature uniformity of the batteries, usually disregarded in studies of the integrated performance of BESSs. This paper presents a new battery thermal management system (BTMS) using a personalized air supply instead of a central air supply. Thermal models are established to predict the thermal behavior of BESSs with 400 battery packs. Moreover, several optimizations comprising the effect of the position and number of air inlets, the number, and angle of the baffles on the air distribution in the ducts are proposed. The results show that the distributed air supply from the main air inlet makes the air velocity in the main air ducts more uniform. It is demonstrated that air deflection is the main source of airflow inhomogeneity at the air outlets. The airflow uniformity is better when the baffles are added at the entrance and the bottom of each riser duct than at other locations. The improved air supply scheme makes the nonuniformity coefficient of air velocity reduced from 1.358 to 0.257. The findings can guide the selection of a cooling form to enhance the safety of BESSs.
Źródło:: Bulletin of the Polish Academy of Sciences. Technical Sciences; 2022, 70, 2; art. no. e140692
0239-7528
Pojawia się w:: Bulletin of the Polish Academy of Sciences. Technical Sciences
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 13.

Tytuł:: Thermodynamic analysis of cycle arrangements of the coal-fired thermal power plants with carbon capture
Autorzy:: Kindra, Vladimir Olegovich
Milukov, Igor Alexandrovich
Shevchenko, Igor Vladimirovich
Shabalova, Sofia Igorevna
Kovalev, Dmitriy Sergeevich
Powiązania:: https://bibliotekanauki.pl/articles/1955057.pdf
Data publikacji:: 2021
Wydawca:: Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:: combined cycle power plant
carbon capture
storage system
precombustion capture
post-combustion capture
oxy-fuel combustion
Opis:: The electricity production by combustion of organic fuels, especially coal, increases the atmospheric CO2 content, which contributes to global warming. The greenhouse gas emissions by the power production industry may be reduced by the application of CO2 capture and storage systems, but it remarkably decreases the thermal power plant (TPP) efficiency because of the considerable increase of the auxiliary electricity requirements. This paper describes the thermodynamic analysis of a combined cycle TPP with coal gasification and preliminary carbon dioxide capture from the syngas. Utilization of the heat produced in the fuel preparation increases the TPP net efficiency from 42.3% to 47.2%. Moreover, the analysis included the combined cycle power plant with coal gasification and the CO2 capture from the heat recovery steam generator exhaust gas, and the oxy-fuel combustion power cycle with coal gasification. The coal-fired combined cycle power plant efficiency with the preliminary CO2 capture from syngas is 0.6% higher than that of the CO2 capture after combustion and 9.9% higher than that with the oxy-fuel combustion and further CO2 capture. The specific CO2 emissions are equal to 103 g/kWh for the case of CO2 capture from syngas, 90 g/kWh for the case of CO2 capture from the exhaust gas and 9 g/kWh for the case of oxy-fuel combustion.
Źródło:: Archives of Thermodynamics; 2021, 42, 4; 103-121
1231-0956
2083-6023
Pojawia się w:: Archives of Thermodynamics
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 14.

Tytuł:: Thermodynamic analysis of an innovative steam turbine power plant with oxy-methane combustors
Autorzy:: Kindra, Vladimir Olegovich
Osipov, Sergey Konstantinovich
Zlyvko, Olga Vladimirovna
Shcherbatov, Igor Alexandrovich
Sokolov, Vladimir Petrovich
Powiązania:: https://bibliotekanauki.pl/articles/1955067.pdf
Data publikacji:: 2021
Wydawca:: Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:: Combined cycle power plant
carbon capture
storage system
precombustion capture
post-combustion capture
oxy-fuel combustion
Opis:: The Rankine cycle steam turbine power plants make a base for world electricity production. The efficiency of modern steam turbine units is not higher than 43–45%, which is remarkably lower compared to the combined cycle power plants. However, an increase in steam turbine power plant efficiency could be achieved by the rise of initial cycle parameters up to ultra-supercritical values: 700–780◦C, 30–35 MPa. A prospective steam superheating technology is the oxy-fuel combustion heating in a sidemounted combustor located in the steam pipelines. This paper reviews thermal schemes of steam turbine power plants with one or two side-mounted steam superheaters. An influence of the initial steam parameters on the facility thermal efficiency was identified and primary and secondary superheater parameters were optimized. It was found that the working fluid superheating in the side-mounted oxy-methane combustors leads to an increase of thermal efficiency higher than that with the traditional boiler superheating in the initial temperature ranges of 700–780◦C and 660–780◦C by 0.6% and 1.4%, respectively.
Źródło:: Archives of Thermodynamics; 2021, 42, 4; 123-140
1231-0956
2083-6023
Pojawia się w:: Archives of Thermodynamics
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 15.

Tytuł:: Smart control of energy storage system in residential photovoltaic systems for economic and technical efficiency
Autorzy:: Kaczorowska, Dominika
Rezmer, Jacek
Janik, Przemysław
Sikorski, Tomasz
Powiązania:: https://bibliotekanauki.pl/articles/2202548.pdf
Data publikacji:: 2023
Wydawca:: Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:: economic efficiency
energy storage system ESS
microgrid management
optimal power flow
OPF
particle swarm optimisation PSO
Opis:: In recent years, due to the increasing number of renewable energy sources, which are characterised by the stochastic nature of the generated power, interest in energy storage has increased. Commercial installations use simple deterministic methods with low economic efficiency. Hence, there is a need for intelligent algorithms that combine technical and economic aspects. Methods based on computational intelligence (CI) could be a solution. The paper presents an algorithm for optimising power flow in microgrids by using computational intelligence methods. This approach ensures technical and economic efficiency by combining multiple aspects in a single objective function with minimal numerical complexity. It is scalable to any industrial or residential microgrid system. The method uses load and generation forecasts at any time horizon and resolution and the actual specifications of the energy storage systems, ensuring that technological constraints are maintained. The paper presents selected calculation results for a typical residential microgrid supplied with a photovoltaic system. The results of the proposed algorithm are compared with the outcomes provided by a deterministic management system. The computational intelligence method allows the objective function to be adjusted to find the optimal balance of economic and technical effects. Initially, the authors tested the invented algorithm for technical effects, minimising the power exchanged with the distribution system. The application of the algorithm resulted in financial losses, €12.78 for the deterministic algorithm and €8.68 for the algorithm using computational intelligence. Thus, in the next step, a control favouring economic goals was checked using the CI algorithm. The case where charging the storage system from the grid was disabled resulted in a financial benefit of €10.02, whereas when the storage system was allowed to charge from the grid, €437.69. Despite the financial benefits, the application of the algorithm resulted in up to 1560 discharge cycles. Thus, a new unconventional case was considered in which technical and economic objectives were combined, leading to an optimum benefit of €255.17 with 560 discharge cycles per year. Further research of the algorithm will focus on the development of a fitness function coupled to the power system model.
Źródło:: Archives of Electrical Engineering; 2023, 72, 1; 81--102
1427-4221
2300-2506
Pojawia się w:: Archives of Electrical Engineering
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Informacja

Wyszukujesz frazę "storage system" wg kryterium: Temat

Źródło danych

Dostawca treści

Kolekcja

Rok wydania

Wydawca

Temat

Autor

Typ dokumentu

Język