- Tytuł:
- Influence of Steam Reforming Catalyst Geometry on the Performance of Tubular Reformer – Simulation Calculations
- Autorzy:
-
Franczyk, E.
Gołębiowski, A.
Borowiecki, T.
Kowalik, P.
Wróbel, W. - Powiązania:
- https://bibliotekanauki.pl/articles/184862.pdf
- Data publikacji:
- 2015
- Wydawca:
- Polska Akademia Nauk. Czytelnia Czasopism PAN
- Tematy:
-
tubular steam reforming
nickel catalyst geometry
process simulation
catalyst coking
process intensification
symulacja procesu
katalizator koksujący
intensyfikacja - Opis:
- A proper selection of steam reforming catalyst geometry has a direct effect on the efficiency and economy of hydrogen production from natural gas and is a very important technological and engineering issue in terms of process optimisation. This paper determines the influence of widely used seven-hole grain diameter (ranging from 11 to 21 mm), h/d (height/diameter) ratio of catalyst grain and Sh/St (hole surface/total cylinder surface in cross-section) ratio (ranging from 0.13 to 0.37) on the gas load of catalyst bed, gas flow resistance, maximum wall temperature and the risk of catalyst coking. Calculations were based on the one-dimensional pseudo-homogeneous model of a steam reforming tubular reactor, with catalyst parameters derived from our investigations. The process analysis shows that it is advantageous, along the whole reformer tube length, to apply catalyst forms of h/d = 1 ratio, relatively large dimensions, possibly high bed porosity and Sh/St ≈ 0.30-0.37 ratio. It enables a considerable process intensification and the processing of more natural gas at the same flow resistance, despite lower bed activity, without catalyst coking risk. Alternatively, plant pressure drop can be reduced maintaining the same gas load, which translates directly into diminishing the operating costs as a result of lowering power consumption for gas compression.
- Źródło:
-
Chemical and Process Engineering; 2015, 36, 2; 239-250
0208-6425
2300-1925 - Pojawia się w:
- Chemical and Process Engineering
- Dostawca treści:
- Biblioteka Nauki
Artykuł