Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "acid solution" wg kryterium: Temat


Wyświetlanie 1-3 z 3
Tytuł:
Evaluation of Some Inorganic Anions and Organic Compounds as Corrosion Inhibitors of Cu-Zn Alloys in H2SO4 and HNO3 Solutions
Autorzy:
Ahmed, Amal S. I.
Ghanem, Wafaa A.
Hussein, Walaa A.
Gaber, Ghalia A.
Powiązania:
https://bibliotekanauki.pl/articles/351226.pdf
Data publikacji:
2020
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
Cu-Zn alloys
oxy-acid solution
inhibition efficiency
inorganic anions
organic compounds
Opis:
Evaluation of inorganic and organic compounds as corrosion inhibitors of Cu-Zn alloys in H2 SO4 and HNO3 solutions was studied using potentiodynamic and impedance spectroscopy along with scanning electron microscope (SEM) and energy dispersive X-Ray analyzer (EDX) investigations. The corrosion inhibition of Cu-Zn alloys was investigated in oxy acid solutions using inorganic potassium permanganate and di-hydrogen phosphate, amino acids as environmentally safe materials, commercial cooling water, and green tea extracts. Both potassium permanganate and di-hydrogen phosphate improve the corrosion resistance of Cu-Zn alloys. Phosphate appears more effective as corrosion inhibitor for Cu-Zn alloys than permanganate. The inhibition efficiency (IE%) of the different amino acids such as valine, leucine and lysine was also calculated. The experimental results have shown that amino acid-like lysine can be used as an efficient corrosion inhibitor for the Cu-Zn alloys in oxy acid solutions. This may be due to the presence of two amino groups adsorbed together. For lysine, inhibition efficiency, IE%, of ~87 and ~59 is for H2SO4 and ~96.3 and 54.9 for HNO3 for alloy I and II respectively are observed. Due to the composition of green water have a great effect on the inhibition action on Cu-Zn alloys which reaching 91.8 and 96.5% for Alloy I and 95.4 and 87.1% for Alloy II in 0.5 M H2 SO4 and HNO3 respectively. Although benzotriazole, in cooling water, is an excellent inhibitor suitable for use in a wide variety of environments, it has toxic properties. So, much of the recent researches have focused on formulating new and more environmentally acceptable preservation solutions. The green tea, as plant extract, will be very environmentally friendly. The EDX confirm the formation of a protective layer on the Cu-Zn alloys containing aluminum in Alloy II. This sequence reflects the beneficial effects of Al in Alloy II. The presence of 2.43% Al in Alloy II improves the corrosion resistance due to the formation of thin, transparent, stable and self-healing Al2 O3 layer. This confirmed the results obtained from the potentiodynamic polarization measurements and EIS methods.
Źródło:
Archives of Metallurgy and Materials; 2020, 65, 2; 639-651
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Protective properties of PEDOT/ABA coatings deposited from micellar solution on stainless steel
Własciwości ochronne powłok PEDOT/ABA osadzanych z środowiska micelarnego na stali nierdzewnej
Autorzy:
Adamczyk, L.
Pietrusiak, A.
Bala, H.
Powiązania:
https://bibliotekanauki.pl/articles/352695.pdf
Data publikacji:
2011
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
polimer przewodzący
poli(3,4-etylenodioksytiofen)
kwas 4-aminobenzoesowy
powłoka antykorozyjna
stal nierdzewna
conducting polymers
poly(3,4-ethylenodioxythiophene)
4-aminobenzoic acid
micellar modification solution
anticorrosion coating
stainless steel
Opis:
Composite coatings, consisting of combinations of the conducting polymer poly(3,4-ethylenedioxythiphene) (PEDOT) and 4-aminobenzoic acid (ABA), were electrodeposited on glassy carbon and X20Cr13 stainless steel by cyclic voltammetry, using a sodium dodecylsulfate (SDS) micellar aqueous solution of EDOT and ABA as a reaction medium. The coating deposition potential range, scan rate and composition of modification solution were determined. The protective properties of the resulting films on stainless steel were investigated in acidified (pH=4) 0.25 M sulphate solution in the absence and in presence of 0.5 M chloride ions. Diagnostic experiments include measurements of open circuit potential versus exposure time and potentiodynamic polarisation tests. Morphology of the obtained composite coatings was examined using optical metallographic microscope. The composite coatings provide good adherence to the steel substrate and very effective steel corrosion protection. The PEDOT/ABA coatings allow to stabilize the steel corrosion potential within the passive region both in absence and in presence of chloride ions.
Powłoki kompozytowe, na bazie polimeru przewodzacego- poli(3,4-etylenodioksytiofenu) (PEDOT) i kwasu 4-aminobenzoesowego (ABA), osadzano na powierzchni wegla szklistego i stali nierdzewnej X20Cr13 przy użyciu metody woltamperometrii cyklicznej. Do osadzania powłok zastosowano wodne roztwory dodecylosiarczanu sodu (SDS) zawierajace EDOT i ABA. Zbadano wpływ zakresu potencjału osadzania, szybkości przemiatania potencjałem i składu roztworu modyfikacyjnego na efektywność procesu elektroosadzania powłok. Własciwosci ochronne powłok uzyskanych na stali nierdzewnej badano w zakwaszonych (pH=4) roztworach 0,25 M siarczanowych niezawierajacych i zawierajacych dodatek 0,5 M jonów chlorkowych. Zbadano zaleznosc potencjału stacjonarnego od czasu wytrzymania w roztworze korozyjnym oraz wykonano potencjodynamiczne krzywe polaryzacji. Morfologie powłok zbadano przy pomocy metalograficznego mikroskopu optycznego. Uzyskane powłoki wykazuja dobra adhezje do podłoza stali i efektywnie zabezpieczaja stal przed korozja. Powłoki PEDOT/ABA stabilizuja potencjał korozyjny chronionej stali zarówno w środowisku niezawierającym jak i zawierającym jony chlorkowe.
Źródło:
Archives of Metallurgy and Materials; 2011, 56, 4; 883-889
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Solution blow spun poly-L-lactic acid/ceramic fibrous composites for bone implant applications
Autorzy:
Wojasiński, Michał
Ciach, Tomasz
Powiązania:
https://bibliotekanauki.pl/articles/2086798.pdf
Data publikacji:
2021
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
solution blow spinning
composite fibres
submicron fibres
nanofibres
poly-L-lactic acid
ceramic particles
bone implants
wirowanie z rozdmuchiwaniem roztworu
włókna kompozytowe
włókna submikronowe
nanowłókna
kwas poli-L-mlekowy
cząstki ceramiczne
implanty kostne
Opis:
Every bone implant to work correctly after implantation needs to integrate with the surrounding bone. To enhance such a process, called osseointegration, various techniques of implant surface modification emerged. One of the approaches is based on the deposition of nano- and submicron materials on the implant surface. This paper presents a solution blow spinning process for producing poly-L-lactic acid (PLLA)/ceramic fibrous composites designed to be deposited directly onto orthopaedic implants prior to implantation to increase osseointegration. We produced plain PLLA fibrous materials for comparison, and fibrous composite materials with -tricalcium phosphate (TCP), hydroxyapatite nanoparticles (nHAp) and hydroxyapatite nanoparticles modified with lecithin (nHAp-LE). We performed the structural analysis of produced materials with scanning electron microscopy, gravimetric determination of porosity, and water contact angle measurement. We also used infrared spectroscopy, Alizarin Red S staining, and cytotoxicity evaluation to conclude that PLLA/nHAp-LE composite material shows the most promising properties to be applied as surface modification of bone implants. To visualise fibrous composite deposition on implants, we used two models: titanium plate and stainlesssteel bolt. Thus, we showed that the solution blow spun materials can be used for surface modification of orthopaedic implants.
Źródło:
Chemical and Process Engineering; 2021, 42, 3; 275--289
0208-6425
2300-1925
Pojawia się w:
Chemical and Process Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-3 z 3

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies