Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Zhang, Y.-H." wg kryterium: Autor


Tytuł:
Effect of acid buffering capacity on the remobilization of heavy metals in sewage sludge barrier for tailings
Autorzy:
Chen, Y.
Zhang, H.
Ju, Y.
Powiązania:
https://bibliotekanauki.pl/articles/205048.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
sewage sludge
heavy metals
acid mine drainage
acid buffering capacity
remobilization
Opis:
Remobilization of heavy metals from the bottom liner system due to the seepage of acid mine drainage (AMD) is an important concern in the long-term management of tailing impoundment. Titration tests were carried out to evaluate the acid buffering capacity (ABC) of sewage sludge and to investigate its effect on the remobilization of heavy metals. Test results demonstrate that the ABC increases with solid/liquid ratio and anaerobic incubation time and it is mainly attributed to the abundant organic matters contained and increasing carbonate loads. The added heavy metals (Zn, Pb, and Cu) were well immobilized during the anaerobic incubation stage but were released out dramatically during the acidification especially when pH drops below 6.0 because of dissolution of carbonates and cation exchange of clay minerals. The calculated results, from a simplified model, indicate that high levels of remobilization of heavy metals are not expected during the typical management time because of the high ABC of compacted sewage sludge barrier. These results support that sewage sludge is a suitable bottom liner material for the management of AMD from tailings.
Źródło:
Archives of Environmental Protection; 2018, 44, 2; 62-72
2083-4772
2083-4810
Pojawia się w:
Archives of Environmental Protection
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
New compensation scheme of magneto-optical current sensor for temperature stability improvement
Autorzy:
Chen, J.
Li, H.
Zhang, M.
Zhang, Y.
Powiązania:
https://bibliotekanauki.pl/articles/221874.pdf
Data publikacji:
2012
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
magneto-optical current sensor
normalization
Verdet constant
birefringence
Opis:
A novel magneto-optical current sensor (MOCS) with two sensing arms is proposed to improve the temperature stability. One of the arms, with a highly stable permanent magnet attached and orthogonal to the other one, is designed to provide a reference that follows the temperature characteristics of the sensing material. By a normalization operation between two arms, the temperature drift is compensated adaptively and a sensing output proportional to the measured current can be reached. A dual-input and dual-output structure is specially designed for the reference sensing arm to demodulate the DC Faraday rotation angle. This scheme compensates simultaneously two main temperature influence factors, the Verdet constant and linear birefringence. Validation tests were carried out and are discussed.
Źródło:
Metrology and Measurement Systems; 2012, 19, 3; 611-616
0860-8229
Pojawia się w:
Metrology and Measurement Systems
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Impact of waste heat recovery systems on energy efficiency improvement of a heavy-duty diesel engine
Autorzy:
Ma, Z.
Chen, H.
Zhang, Y.
Powiązania:
https://bibliotekanauki.pl/articles/240819.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
energy efficiency design index
energy efficiency operational indicator
waste heat recovery system
performance analysis
reduction factor
wskaźnik efektywności energetycznej
wskaźniki eksploatacyjny efektywności energetycznej
system odzysku ciepła odpadowego
analiza wydajności
współczynnik redukcyjny
Opis:
The increase of ship’s energy utilization efficiency and the reduction of greenhouse gas emissions have been high lightened in recent years and have become an increasingly important subject for ship designers and owners. The International Maritime Organization (IMO) is seeking measures to reduce the CO2 emissions from ships, and their proposed energy efficiency design index (EEDI) and energy efficiency operational indicator (EEOI) aim at ensuring that future vessels will be more efficient. Waste heat recovery can be employed not only to improve energy utilization efficiency but also to reduce greenhouse gas emissions. In this paper, a typical conceptual large container ship employing a low speed marine diesel engine as the main propulsion machinery is introduced and three possible types of waste heat recovery systems are designed. To calculate the EEDI and EEOI of the given large container ship, two software packages are developed. From the viewpoint of operation and maintenance, lowering the ship speed and improving container load rate can greatly reduce EEOI and further reduce total fuel consumption. Although the large container ship itself can reach the IMO requirements of EEDI at the first stage with a reduction factor 10% under the reference line value, the proposed waste heat recovery systems can improve the ship EEDI reduction factor to 20% under the reference line value.
Źródło:
Archives of Thermodynamics; 2017, 38, 3; 63-75
1231-0956
2083-6023
Pojawia się w:
Archives of Thermodynamics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Study on distribution of CO and concentration prediction in blind gallery after blasting operation
Badanie i prognozowanie rozkładu stężenia CO w ślepym wyrobisku po zakończeniu prac strzałowych
Autorzy:
Cao, Y.
Ji, H.
Zhang, Y.
Li, S.
Powiązania:
https://bibliotekanauki.pl/articles/219231.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
rozkład stężenia CO
zależność stężenia od czasu
współczynnik określający równomierność stężenia
współczynnik dyspersji
współczynnik wyrażający spadek stężenia
czas usuwania szkodliwych gazów po zakończeniu prac strzałowych
time-concentration curve
CO concentration distribution
uniformity coefficient
dispersion coefficient
attenuation index
fume-drainage time
Opis:
It is meaningful to study the issues of CO migration and its concentration distribution in a blind gallery to provide a basis for CO monitoring and calculation of fume-drainage time, which is of a great significance to prevent fume-poisoning accidents and improve efficiency of an excavation cycle. Based on a theoretical analysis of a differential change of CO mass concentration and the CO dispersion model in a fixed site, this paper presents several blasting fume monitoring test experiments, carried out with the test location to the head LP in arrange of 40-140 m. Studies have been done by arranging multiple sensors in the arch cross-section of the blind gallery, located at the Guilaizhuang Gold Mine, Shandong Province, China. The findings indicate that CO concentrations in the axial directions are quadratic functions with the Y and Z coordinate values of the cross-section of the blind gallery in an ascending stage of CO time-concentration curve, with the maximum CO concentrations in Y = 150 cm and Z = 150 cm. Also, the gradients of CO concentration in the gallery are symmetrical with the Y = 150 cm and Z = 150 cm. In the descending stage of CO time-concentration curve, gradients of CO concentration decrease in lateral sides and increase in the middle, then gradually decrease at last. The rules of CO concentration distribution in the cross-section are that airflow triggers the turbulent change of the CO distribution volume concentration and make the CO volume concentration even gradually in the fixed position of the gallery. Moreover, the CO volume concentrations decrease gradually, as well as volume concentration gradients in the cross-section. The uniformity coefficients of CO concentration with duct airflow velocities of 12.5 m/s, 17.7 m/s and 23.2 m/s reach near 0.9 at 100-140 m from the heading to the monitoring spot. The theoretical model of a one-dimensional migration law of CO basically coincides with the negative exponential decay, which is verified via fitting. The average effective turbulent diffusion coefficient of CO in the blind gallery is approximate to 0.108 m2/s. There are strong linear relationships between CO initial concentration, CO peak concentrations and mass of explosive agent, which indicates that the CO initial concentration and the CO peak concentration can be predicted, based on the given range of the charging mass. The above findings can provide reliable references to the selection, installation of CO sensors and prediction of the fume-drainage time after blasting.
Badania migracji, rozpływu i rozkładu stężenia CO w ślepym wyrobisku są niezbędne, stanowią one bowiem podstawę do skutecznego monitorowania poziomu CO i obliczania czasu niezbędnego na usunięcie z wyrobiska szkodliwych gazów – jest to kwestia kluczowa dla zapobiegania wypadkom związanych z zatruciem spalinami oraz dla planowania przebiegu prac wydobywczych. W oparciu o teoretyczną analizę zmian stężenia masowego CO i wykorzystując model dyspersji gazu w stałym punkcie, w pracy przedstawiono wyniki eksperymentów przeprowadzonych w ramach monitorowania stężeń gazów powybuchowych w wyrobisku LP na odległości 40-140 m od czoła wyrobiska. Badania prowadzono przy wykorzystaniu zestawu czujników rozmieszczonych w wybranych punktach ślepego wyrobiska w kopalni złota Guilaizhuang, w prowincji Shandong, Chiny. Wyniki badań wskazują, że stężenia CO w kierunkach poosiowych są funkcjami kwadratowymi wartości współrzędnych Y i Z przekroju przekroju ślepego wyrobiska w zakresie krzywej opadającej na wykresie opisującym zależność stężenia CO od czasu, przy czym maksymalne stężenia CO stwierdzono dla Y =150 cm i Z = 150 cm. Ponadto, wykazano że gradienty stężenia CO w wyrobisku są symetryczne dla Y =150 cm i Z =150 cm. W zakresie krzywej rosnącej na wykresie zależności stężenia CO od czasu gradienty stężenia CO wykazują spadek w końcowych regionach wykresu, w środkowej części wykresu notuje się jego wzrost, po czym znów następuje spadek. Na rozkład stężenia CO w tym przekroju wpływ ma fakt że przepływ powietrza wywołuje turbulentne zmiany stężenia objętościowego CO, następnie stężenie objętościowe maleje systematycznie w dalszych częściach wyrobiska. Ponadto, stwierdzono że stężenie CO a także gradienty stężenia objętościowego w przekroju maleją stopniowo. Współczynniki wyrażające równomierność stężenia CO przy przepływach powietrza z prędkością 12.5 m/s 17.7 m/s i 23.2 m/s osiągają wartość 0.9 w punkcie kontrolnym odległym od wyrobiska o 100-140 m. Teoretyczny model jednowymiarowego rozpływu CO zasadniczo pokrywa się z wzorem zależności wykładniczej z wykładnikiem ujemnym, co zostało potwierdzone w procedurze pasowania. Średnia wartość współczynnika dyfuzji CO dla przepływu turbulentnego w ślepym wyrobisku wyniosła 0.108 m2/s. Stwierdzono istnienie silnej zależności liniowej pomiędzy początkowym stężeniem CO, szczytową wielkością stężenia oraz masą użytego materiału wybuchowego, która wskazuje na możliwość prognozowania początkowego i szczytowego stężenia CO w oparciu o zakres wielkości użytego ładunku wybuchowego. Przedstawione wyniki badań stanowić mogą wiarygodną podstawę dla wyboru rodzaju i miejsca zainstalowania czujników CO oraz do prognozowania czasu wymaganego na usuniecie szkodliwych gazów po zakończeniu prac strzałowych.
Źródło:
Archives of Mining Sciences; 2018, 63, 2; 283-300
0860-7001
Pojawia się w:
Archives of Mining Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Influence of the number of turns on the performance of permanent magnet synchronous motor
Autorzy:
Qiu, H.
Zhang, Y.
Yang, C.
Yi, R.
Powiązania:
https://bibliotekanauki.pl/articles/200007.pdf
Data publikacji:
2020
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
eddy currents density
losses
PMSM
number of turns
temperature field
Opis:
The current passed by the stator coil of the permanent magnet synchronous motor (PMSM) provides rotating magnetic field, and the number of turns will directly affect the performance of PMSM. In order to analyze its influence on the PMSM performance, a 3 kW, 1500 r/min PMSM is taken as an example, and the 2D transient electromagnetic field model is established. The correctness of the model is verified by comparing the experimental data and calculated data. Firstly, the finite element method (FEM) is used to calculate the electromagnetic field of the PMSM. The performance parameters of the PMSM are obtained. On this basis, the influence of the number of turns on PMSM performance is quantitatively analyzed, including current, no-load back electromotive force (EMF), overload capacity and torque. In addition, the influence of the number of turns on eddy current loss is further studied, and its variation rule is obtained, and the variation mechanism of eddy current loss is revealed. Finally, the temperature field of the PMSM is analyzed by the coupling method of electromagnetic field and temperature field, and the temperature rise law of PMSM is obtained. The analysis of this paper provides reference and practical value for the optimization design of PMSM.
Źródło:
Bulletin of the Polish Academy of Sciences. Technical Sciences; 2020, 68, 3; 429-436
0239-7528
Pojawia się w:
Bulletin of the Polish Academy of Sciences. Technical Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Experimental and numerical study of the uniaxial compressive stress-strain relationship of a rock mass with two parallel joints
Autorzy:
Xiong, L. X.
Yuan, H. Y.
Zhang, Y.
Zhang, K. F.
Li, J. B.
Powiązania:
https://bibliotekanauki.pl/articles/231076.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
masa skalna łączona
złącze równoległe
siła szczytowa
jointed rock mass
parallel joint
peak strength
Opis:
A “rock bridge”, defined as the closest distance between two joints in a rock mass, is an important feature affecting the jointed rock mass strength. Artificial jointed rock specimens with two parallel joint fractures were tested under uniaxial compression and numerical simulations were carried out to study the effects of the inclination of the rock bridge, the dip angle of the joint, rock bridge length, and the length of joints on the strength of the jointed rock mass. Research results show: (1) When the length of the joint fracture, the length of the rock bridge, and the inclination of the rock bridge stay unchanged, the uniaxial compressive strength of the specimen gradually increases as the inclination of the joint fracture increases from 0° to 90°. (2) When the length of the joint fracture, the length of the rock bridge, and the inclination of the joint fracture stay unchanged, the uniaxial compressive strength of the specimen shows variations in trends with the inclination of the rock bridge increasing from 30° to 150° (3). In the case when the joint is angled from the vertical loading direction, when the dip angle of the joint fracture, the inclination of the rock bridge, and the length of the rock bridge stay unchanged, the uniaxial compressive strength of the specimen gradually decreases with an increasing length of joint fracture. When the dip angle of the joint fracture, the inclination of the rock bridge, and the length of the joint fracture stay unchanged, the uniaxial compressive strength of the specimen does not show a clear trend with an increase of the length of the rock bridge.
Źródło:
Archives of Civil Engineering; 2019, 65, 2; 67-80
1230-2945
Pojawia się w:
Archives of Civil Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Characterization of monochlorobenzene contamination in soils using geostatistical interpolation and 3D visualization for agrochemical industrial sites in southeast China
Autorzy:
Ren, L.
Lu, H.
He, L.
Zhang, Y.
Powiązania:
https://bibliotekanauki.pl/articles/204614.pdf
Data publikacji:
2016
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
soil pollution
monochlorobenzene
POPs
persistent organic pollutants
geostatistical interpolation
3D visualization
Opis:
Persistent organic pollutants (POPs) originating from agrochemical industries have become an urgent environmental problem worldwide. Ordinary kriging, as an optimal geostatistical interpolation technique, has been proved to be sufficiently robust for estimating values with finite sampled data in most of the cases. In this study, ordinary kriging interpolation integrate with 3D visualization methods is applied to characterize the monochlorobenzene contaminated soil for an agrochemical industrial site located in Jiangsu province. Based on 944 soil samples collected by Geoprobe 540MT and monitored by SGS environmental monitoring services, 3D visualization in terms of the spatial distribution of pollutants in potentially contaminated soil, the extent and severity of the pollution levels in different layers, high concentration levels and isolines of monochlorobenzene concentrations in this area are provided. From the obtained results, more information taking into account the spatial heterogeneity of soil area will be helpful for decision makers to develop and implement the soil remediation strategy in the future.
Źródło:
Archives of Environmental Protection; 2016, 42, 3; 17-24
2083-4772
2083-4810
Pojawia się w:
Archives of Environmental Protection
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Cloning and characterization of a pathogenesis-related gene (ThPR10) from Tamarix hispida
Autorzy:
Zhang, R.
Wang, Y.
Liu, G.
Li, H.
Powiązania:
https://bibliotekanauki.pl/articles/19850.pdf
Data publikacji:
2010
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Opis:
A PR10 gene (ThPR10) was cloned from Tamarix hispida and characterized. Real-time RT-PCR was employed to evaluate gene expression levels. ThPR10 was expressed in both leaves and roots of T. hispida under normal growth conditions, and can be highly induced in both leaf and root tissues by abiotic stresses including NaCl, PEG, cold, CdCl2, and ABA (abscisic acid) treatments. Our results indicated that ThPR10 is involved in the abiotic stress response, and regulated by an ABA-dependent signaling pathway. Subsequently, ThPR10 was localized at the subcellular level. The gene was fused with the GFP N-terminal driven by CaMV35S promoter and transiently expressed in onion epidermal cells. This strategy localized the ThPR10 protein to the nucleus of onion epidermal cells, suggesting that the pathogenesis-related proteins play a functional role in the cell nucleus.
Źródło:
Acta Biologica Cracoviensia. Series Botanica; 2010, 52, 2
0001-5296
Pojawia się w:
Acta Biologica Cracoviensia. Series Botanica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect Of Low-Temperature Annealing On The Properties Of Ni-P Amorphous Alloys Deposited Via Electroless Plating
Wpływ oceny mikrostruktury na odporność korozyjną wyżarzonego stopu amorficznego Ni-P
Autorzy:
Zhao, G.
Zou, Y.
Zhang, H.
Zou, Z.
Powiązania:
https://bibliotekanauki.pl/articles/351971.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
Ni-P amorphous
local atomic structure
corrosion resistance
microhardness
stopy amorficzne Ni-P
lokalna struktura atomowa
odporność na korozję
mikrotwardość
Opis:
Amorphous Ni-P alloys were prepared via electroless plating and annealing at 200°C at different times to obtain different microstructures. The effects of low-temperature annealing on the properties of amorphous Ni-P alloys were studied. The local atomic structure of the annealed amorphous Ni-P alloys was analyzed by calculating the atomic pair distribution function from their X-ray diffraction patterns. The results indicate that the properties of the annealed amorphous Ni-P alloys are closely related to the order atomic cluster size. However, these annealed Ni-P alloys maintained their amorphous structure at different annealing times. The variation in microhardness is in agreement with the change in cluster size. By contrast, the corrosion resistance of the annealed alloys in 3.5 wt% NaCl solution increases with the decrease in order cluster size.
Amorficzne stopy Ni-P otrzymane metodą powlekania bezprądowego wyżarzano w temperaturze 200°C w różnych czasach, w celu otrzymania zróżnicowanej mikrostruktur. Badano wpływ mikrostruktury wyżarzanych stopów amorficznych Ni-P na ich odporność korozyjną w roztworze 3,5% wag. NaCl. Wyniki wskazują, że wielkość klastra w wyżarzanych stopach amorficznych Ni-P najpierw zmniejszyła się, a następnie zwiększyła wraz z czasem wyżarzania. Odporność badanych stopów na korozję jest ściśle związana z wielkością klastra, mimo, że stopy te po wyżarzaniu w różnych czasach zachowują strukturę amorficzną. Odporność wyżarzanych stopów amorficznych Ni-P w roztworze 3,5% wag. NaCl zwiększa się wraz ze zmniejszeniem się klastra.
Źródło:
Archives of Metallurgy and Materials; 2015, 60, 2A; 865-869
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The Research on Characterization of Crushability for Foundry Sand Particles
Autorzy:
Dai, Y.
Ma, Q. Y.
Li, X. H.
Zhang, X.
Hu, F. P.
Zhang, Y.
Xie, W. D.
Powiązania:
https://bibliotekanauki.pl/articles/379689.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
foundry sand particle
mechanical load
AFS grain fineness
crushability
piasek odlewniczy
obciążenie mechaniczne
rozdrobnienie ziarna
Opis:
In this paper, crushability of foundry sand particles was studied. Three kinds of in-service silica sands in foundry enterprises selected as the study object, and foundry sand particles were subjected to mechanical load and thermal load during service were analyzed. A set of methods for simulating mechanical load and thermal load by milling and thermal-cold cycling were designed and researched, which were used to characterize the crushability for silica sand particles, the microstructure was observed by SEM. According to the user’s experience in actual application, the crushability of Sand C was the best and then Sand B, the last Sand A. The results indicated that mechanical load, thermal load and thermal-mechanical load can all be used to characterize the crushability of foundry sand particles. Microscopic appearances can qualitatively characterize the crushability of foundry sand particles to a certain extent, combining with the additions and cracks which are observed on the surface.
Źródło:
Archives of Foundry Engineering; 2017, 17, 4; 231-235
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Influence of Rolling Friction Coefficient on Inter-Particle Percolation in a Packed Bed by Discrete Element Method
Autorzy:
Zhou, H.
Luo, Z.
Zhang, T.
You, Y.
Li, H.
Zou, Z.
Powiązania:
https://bibliotekanauki.pl/articles/356261.pdf
Data publikacji:
2016
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
inter-particle percolation
rolling friction coefficient
discrete element method;
percolation velocity
dispersion coefficient
Opis:
Rolling friction representing the energy dissipation mechanism with the elastic deformation at the contact point could act directly on particle percolation. The present investigation intends to elucidate the influence of rolling friction coefficient on inter-particle percolation in a packed bed by discrete element method (DEM). The results show that the vertical velocity of percolating particles decreases with increasing the rolling friction coefficient. With the increase of rolling friction coefficient, the transverse dispersion coefficient decreases, but the longitudinal dispersion coefficient increases. Packing height has a limited effect on the transverse and longitudinal dispersion coefficient. In addition, with the increase of size ratio of bed particles to percolation ones, the percolation velocity increases. The transverse dispersion coefficient increases with the size ratio before D/d<14. And it would keep constant when the size ratio is greater than 14. The longitudinal dispersion coefficient decreases when the size ratio increases up to D/d=14, then increases with the increase of the size ratio. External forces affect the percolation behaviours. Increasing the magnitude of the upward force (e.g. from a gas stream) reduces the percolation velocity, and decreases the dispersion coefficient.
Źródło:
Archives of Metallurgy and Materials; 2016, 61, 4; 1795-1804
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Emergence and complete genome of Senecavirus A in pigs of Henan Province in China, 2017
Autorzy:
Wang, H.B.
Tian, B.
Lv, H.L.
Wang, F.
Zhang, T.
Wang, C.Y.
Zhang, Y.D.
Dong, J.J.
Powiązania:
https://bibliotekanauki.pl/articles/2087575.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
Senecavirus A
vesicular disease
phylogenetic analysis
Źródło:
Polish Journal of Veterinary Sciences; 2019, 1; 187-190
1505-1773
Pojawia się w:
Polish Journal of Veterinary Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Fatigue Behavior and Mechanism of FV520B-I Owing to the Effect of Loading Frequency on the Fatigue Property in HCF and VHCF Regime
Autorzy:
Wang, J.
Zhang, Y.
Shi, B.
Zhao, Q.
Sun, Q.
Zhang, Z.
Lu, H.
Powiązania:
https://bibliotekanauki.pl/articles/353784.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
ultrahigh loading frequency
FV520B-I
fatigue strength
fatigue conversion model
Opis:
Fatigue property of FV520B-I is affected by the ultrahigh loading frequency significantly, and the ultrasonic fatigue experimental data can’t be employed directly to analyze the fatigue failure in the actual remanufacturing engineering. However few theories about the effect of loading frequency on the fatigue property of FV520B-I has ever been proposed. In this paper, both ultrasonic experiment and conventional experiment are conducted out to obtain the fatigue data. The effect of loading frequency on the fatigue data distribution is discussed firstly, its fatigue limit declines with the increase of the loading frequency. Then the fracture surface observations are captured, the fatigue property and fatigue behavior mechanism of FV520B-I is examined by analyzing the fracture surface features, crack initiation and failure observations. A new material frequency correction factor is proposed and introduced to eliminate the influence of the loading frequency on the FV520B-I fatigue property. FV520B-I empirical fatigue life conversion model and fatigue strength conversion model are established with comprehensive use of a fitting algorithm based on the combination of experimental data and classic formula. A clear understand of the effect of loading frequency on the fatigue property of FV520B-I is novel and has an important significance in guaranteeing the accuracy of the actual fatigue analysis of FV520B-I in the remanufacturing engineering.
Źródło:
Archives of Metallurgy and Materials; 2018, 63, 1; 347-357
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Applied research of U-shape ventilation network in underground mine
Badania stosowane w sieci wentylacyjnej w kształcie „U” w kopalni podziemnej
Autorzy:
Zhang, H.
Pera, L. S.
Carla, V. S.
Zhao, Y.
Powiązania:
https://bibliotekanauki.pl/articles/219698.pdf
Data publikacji:
2014
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
eksperyment symulacyjny
wentylacja kopalni
prędkość przepływu
podobieństwo dynamiczne
simulation experiment
mine ventilation
wind velocity
dynamic similarity
Opis:
For the purpose of fully and systematically observe, research and optimize the U-sharp ventilation system in Vilafruns mine, a simulation model based on the principles of geometric, kinematic and dynamic similarity is established in the simulation laboratory. By simulating a U-shape ventilation network, t he air volume distribution and wind velocity in different sections of the model were measured and compared with practical data obtained in Vilafruns mine. Results show that the lowest wind velocity in the model is higher than 0.42 m/s, thus it is in a turbulent f low state, which satisfies the kinematical and dynamic similarity principles. T he characteristic of air volume distribution and wind velocity in Vilafruns mine are basically simulated by the experimental model through the obtained data and figures, which reflects the establishment of the model is correct and successful, and the experimental data is accurate and reliable. Moreover, this model provides useful references for the selection of mine ventilation types and for the optimization of the existing ventilation network.
W celu prowadzenia pełnej i systematycznej obserwacji, badań oraz optymalizacji sieci wentylacyjnej w kopalni Vilafruns, opracowano model do symulacji laboratoryjnych w oparciu o zasady podobieństwa geometrycznego, kinematycznego oraz dynamicznego. W ramach symulacji działania sieci wentylacyjnej w kształcie litery U, dokonano pomiarów rozkładu objętości powietrza oraz prędkości ruchu powietrza w różnych sekcjach modelu. Dane te porównano następnie z danymi rzeczywistymi uzyskanymi w kopalni Vilafruns. Wyniki pokazują, że najniższa prędkość przepływu powietrza w modelu przewyższa 0.42 m/s, mamy więc do czynienia z przepływem turbulentnym, w ten sposób spełnione są warunki podobieństwa kinematycznego i dynamicznego. Charakterystyka rozkładu objętości powietrza i prędkości przepływu w kopalni Vilafruns zasadniczo otrzymana została na podstawie modelu eksperymentalnego z wykorzystaniem uzyskanych wyników. Oznacza to, że zasadniczo model jest poprawny i skuteczny a dane eksperymentalne są dokładne i wiarygodne. Ponadto, model dostarcza nam cennych danych wyjściowych niezbędnych przy wyborze systemu wentylacji, a także przy optymalizacji istniejącej sieci wentylacyjnej.
Źródło:
Archives of Mining Sciences; 2014, 59, 2; 381-394
0860-7001
Pojawia się w:
Archives of Mining Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Study on electric spring control method considering noncritical load voltage constraint
Autorzy:
Chen, Y.
Ma, G.
Xu, U.
Zhang, H.
Ju, R.
Powiązania:
https://bibliotekanauki.pl/articles/140516.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
electric spring
noncritical load
voltage excursion
reactive power compensation
Opis:
With the increasing penetration rate of grid-connected renewable energy generation, the problem of grid voltage excursion becomes an important issue that needs to be solved urgently. As a new type of voltage regulation control method, electric spring (ES) can alleviate the fluctuations of renewable energy output effectively. In this paper, the background and basic principle of the electric spring are introduced firstly. Then, considering the influence of an electric spring on noncritical load voltage, noncritical loads are classified reasonably, and based on the electric spring phasor diagram, the control method to meet the noncritical load voltage constraint is proposed. This control method can meet the requirements of voltage excursions of different kinds of noncritical load, increase the connection capacity of the noncritical load and improve the voltage stabilization capacity of the electric spring. Finally, through the simulation case, the feasibility and validity of electric spring theory and the proposed control method are verified.
Źródło:
Archives of Electrical Engineering; 2018, 67, 4; 709-724
1427-4221
2300-2506
Pojawia się w:
Archives of Electrical Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies