Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Xu, G. Q." wg kryterium: Autor


Wyświetlanie 1-3 z 3
Tytuł:
Synchronous Measurement of Out-of-Plane Displacement and Slopes by Triple-Optical-Path Digital Speckle Pattern Interferometry
Autorzy:
Gu, G.-Q.
Xu, G.-Z.
Xu, B.
Powiązania:
https://bibliotekanauki.pl/articles/220423.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
simultaneous displacement and slopes measurement
non-destructive testing
digital speckle pattern interferometry
shearography
triple-optical-path
Opis:
This study proposes a triple-optical-path digital speckle pattern interferometry (DSPI) setup for measuring the full-field out-of-plane displacement and two orthogonal slopes simultaneously as well as independently. The designed setup contains one conventional out-of-plane speckle interferometer and two orthogonal modified shearographic interferometers with dual-observation geometry. In the setup, one laser device is used as the coherent source, and three monochrome cameras placed along a single line are used as the image acquisition device. Three correlation fringe patterns, one out-of-plane displacement fringe pattern and two slope fringe patterns, are captured synchronously by three cameras, and then are analysed using the phase-shifting technique to extract the phase distributions. The examinations of a practical non-contact measurement and a non-destructive testing (NDT) application by using the proposed setup are carried out in this study.
Źródło:
Metrology and Measurement Systems; 2018, 25, 1; 3-14
0860-8229
Pojawia się w:
Metrology and Measurement Systems
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Combined Influence of Silicon Content and Oxygen Concentration on the Oxidation Process of Silicon-Containing Steels
Autorzy:
Yuan, Q.
Xu, G.
Zhou, M.
He, B.
Hu, H.
Powiązania:
https://bibliotekanauki.pl/articles/352126.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
silicone content
oxygen concentration
mass gain
isothermal holding time
Opis:
The combined influence of silicon content and oxygen concentration on silicon-containing steels was investigated, via a heating route similar to that applied in the industrial reheating process, using a Simultaneous Thermal Analyzer (STA). Four different oxygen concentrations and three different isothermal holding times were designed. The results show that the effect of silicon on the mass gain depends on the oxygen concentration and the oxidation time. The mass gain of low-silicon steel is greater than that of high-silicon steel at 1260°C in the oxygen concentrations of 1.0 vol.% and 2.0 vol.%, even when the isothermal holding time is 90 minutes. However, there is a critical time point for mass gain in oxygen concentrations ≥3.0 vol.%. The mass gain of lowsilicon steel is greater before and smaller after this critical point. The critical time is deferred with decreasing oxygen concentration.
Źródło:
Archives of Metallurgy and Materials; 2018, 63, 1; 445-450
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect of Strain Rate on the Microstructure of Warm-Deformed Ultrafined Medium-Carbon Steel
Autorzy:
Yuan, Q.
Xu, G.
Liu, S.
Liu, M.
Hu, H.
Powiązania:
https://bibliotekanauki.pl/articles/355659.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
warm deformation
medium-carbon steel
ultrafine grain
strain rate
Fe3C
Opis:
In this study, medium-carbon steel was subjected to warm deformation experiments on a Gleeble 3500 thermosimulator machine at temperatures of 550°C and 650°C and strain rates of 0.001 s-1 to 1 s-1. The warm deformation behavior of martensite and the effects of strain rate on the microstructure of ultrafine grained medium-carbon steel were investigated. The precipitation behavior of Fe3C during deformation was analyzed and the results showed that recrystallization occurred at a low strain rate. The average ultrafine ferrite grains of 500 ± 58 nm were fabricated at 550°C and a strain rate of 0.001 s-1. In addition, the size of Fe3C particles in the ferrite grains did not show any apparent change, while that of the Fe3C particles at the grain boundaries was mainly affected by the deformation temperature. The size of Fe3C particles increased with the increasing deformation temperature, while the strain rate had no significant effect on Fe3C particles. Moreover, the grain size of recrystallized ferrite decreased with an increase in the strain rate. The effects of the strain rate on the grain size of recrystallized ferrite depended on the deformation temperature and the strain rate had a prominent effect on the grain size at 550°C deformation temperature. Finally, the deformation resistance apparently decreased at 550°C and strain rate of 1 s-1 due to the maximum adiabatic heating in the material.
Źródło:
Archives of Metallurgy and Materials; 2018, 63, 4; 1805-1813
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-3 z 3

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies