Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Liu, L.-L." wg kryterium: Autor


Tytuł:
Deliberations about three-phase PLL technologies applied to a grid control of the renewable power system
Autorzy:
Liu, L.
Liu, C.
Powiązania:
https://bibliotekanauki.pl/articles/200960.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
E-PLL
siatka połączona
PLL
SSRF-PL
DDSRF-PLL
grid connected
phase locked loop PLL
Opis:
An efficient phase locked loop (PLL) method is very important to improve the grid-connected efficiency and the locked speed of frequency, phase, and voltage. However, most of literatures only introduce one PLL or one modified PLL method. There are many grid faults due to the grid connection to the renewable power generating system. A comparison and analysis is very important to select the most effective PLL technology for the grid-connected control of the renewable power system. Three PLL technologies are compared at different grid faults, such as single phase voltage drop, two phase voltage drop, frequency deviation, and voltage distortion. Simulation results indicated that different PLL methods have different locked performances at different grid faults.
Źródło:
Bulletin of the Polish Academy of Sciences. Technical Sciences; 2015, 63, 1; 261-267
0239-7528
Pojawia się w:
Bulletin of the Polish Academy of Sciences. Technical Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Experimental study of compressive failure of concrete under static and dynamic loads
Autorzy:
Liu, L.
An, H. M.
Powiązania:
https://bibliotekanauki.pl/articles/230225.pdf
Data publikacji:
2020
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
beton
wytrzymałość na ściskanie jednoosiowe
dynamiczne ładowanie
szybkość odkształcania
pęknięcie
fragmentacja
concrete
uniaxial compressive strength
dynamic load
strain rate
fracture
fragmentation
Opis:
The fracture and fragmentation of concrete under static and dynamic loads are studied. The uniaxial compressive strength test is employed to study the concrete behavior under static loads while the split Hopkinson pressure bar is used to study the dynamic behavior of the concrete under static loads. The theories for acquiring the stress, strain and strain rate of the concrete in the dynamic test by Hopkinson pressure bar has been introduced. The fracture patterns of the concrete in the uniaxial compressive test have been obtained and the static concrete compressive strengths have been calculated. The fracture patterns of the concrete in the uniaxial compressive test have been obtained and the static concrete compressive strengths have been calculated. The fracture and fragmentation of the specimen under dynamic loads have been acquired and the stress-strain curves of concrete under various impact loads are obtained. The stress-strain curve indicates a typical brittle material failure process which includes existing micro-fracture closure stage, linear-elastic stage, nonlinear-elastic stage, and post-failure stages. The influence of the loading rate for the compressive strength of the concrete has compared. Compared with the concrete under static loads, the dynamic loads can produce more fractures and fragments. The concrete strength is influenced by the strain rate and the strength increases almost linearly with the increase of the strain rate.
Źródło:
Archives of Civil Engineering; 2020, 66, 3; 427-441
1230-2945
Pojawia się w:
Archives of Civil Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Numerical study of dynamic behaviors of concrete under various strain rates
Autorzy:
An, H. M.
Liu, L.
Powiązania:
https://bibliotekanauki.pl/articles/230844.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
zachowanie dynamiczne
beton
model Holmquist-Johnson-Cook
HJC
pasek ciśnienia Hopkinsona rozdzielony
SHPB
pęknięcie
podział
dynamic behavior
concrete
Holmquist-Johnson-Cook model
split Hopkinson pressure bar
fracture
fragmentation
Opis:
As the dynamic behavior of the concrete is different from that under static load, this research focuses on the study of dynamic responses of concrete by simulating the split Hopkinson pressure bar (SHPB) test. Finite element code LS-DYNA is used for modeling the dynamic behaviors of concrete. Three continuous models are reviewed and the Holmquist-Johnson-Cook model (HJC) is introduced in detail. The HJC model which has been implemented in LS-DYNA is used to represent the concrete properties. The SHPB test model is established and a few stress waves are applied to the incident bar to simulate the dynamic concrete behaviors. The stress-strain curves are obtained. The stress distributions are analyzed. The crack initiation and propagation process are described. It is concluded that: the HJC model can modeling the entire process of the fracture initiation and fragmentation; the compressive of the concrete is significantly influenced by the strain rates.
Źródło:
Archives of Civil Engineering; 2019, 65, 4; 21-36
1230-2945
Pojawia się w:
Archives of Civil Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Study on mine ventilation resistance coefficient inversion based on genetic algorithm
Badanie inwersji współczynników oporu wentylacji kopalnianej na podstawie algorytmu genetycznego
Autorzy:
Gao, K.
Deng, L.
Liu, J.
Wen, L.
Wong, D.
Liu, Z.
Powiązania:
https://bibliotekanauki.pl/articles/219844.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
wentylacja kopalni węgla
współczynnik wentylacji
odwrócenie
algorytm genetyczny
coal mine ventilation
ventilation coefficient
inversion
genetic algorithm
Opis:
The frictional resistance coefficient of ventilation of a roadway in a coal mine is a very important technical parameter in the design and renovation of mine ventilation. Calculations based on empirical formulae and field tests to calculate the resistance coefficient have limitations. An inversion method to calculate the mine ventilation resistance coefficient by using a few representative data of air flows and node pressures is proposed in this study. The mathematical model of the inversion method is developed based on the principle of least squares. The measured pressure and the calculated pressure deviation along with the measured flow and the calculated flow deviation are considered while defining the objective function, which also includes the node pressure, the air flow, and the ventilation resistance coefficient range constraints. The ventilation resistance coefficient inversion problem was converted to a nonlinear optimisation problem through the development of the model. A genetic algorithm (GA) was adopted to solve the ventilation resistance coefficient inversion problem. The GA was improved to enhance the global and the local search abilities of the algorithm for the ventilation resistance coefficient inversion problem.
Współczynnik oporu oporu wentylacji jezdni w kopalni węgla jest bardzo ważnym parametrem technicznym w projektowaniu i renowacji wentylacji kopalnianej. Obliczenia oparte na wzorach empirycznych i badaniach terenowych w celu obliczenia współczynnika oporu mają ograniczenia. W niniejszym badaniu proponuje się inwertowaną metodę obliczania współczynnika oporu wentylacji kopalni za pomocą kilku reprezentatywnych danych dotyczących przepływu powietrza i ciśnienia w węzłach. Model matematyczny metody inwersji jest opracowywany na zasadzie najmniejszych kwadratów. Zmierzone ciśnienie i obliczone odchylenie ciśnienia wraz z zmierzonym przepływem i obliczonym odchyleniem przepływu są uwzględniane przy określaniu obiektywnej funkcji, która obejmuje również ciśnienie w węźle, przepływ powietrza i ograniczenia współczynników oporu wentylacji. Problem odwrotności współczynnika oporu wentylacji został przekształcony w nieliniowy problem optymalizacji poprzez opracowanie modelu. Zastosowano algorytm genetyczny (GA) w celu rozwiązania problemu inwersji współczynnika oporu wentylacji. GA został ulepszony w celu zwiększenia globalnych i lokalnych możliwości wyszukiwania algorytmu problemu odwrotności współczynnika oporu wentylacji.
Źródło:
Archives of Mining Sciences; 2018, 63, 4; 813-826
0860-7001
Pojawia się w:
Archives of Mining Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A 128-channel high precision time measurement module
Autorzy:
Kang, L.
Zhao, L.
Zhou, J
Liu, S.
An, Q.
Powiązania:
https://bibliotekanauki.pl/articles/221564.pdf
Data publikacji:
2013
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
high precision
time measurement
PXI
data transfer
commissioning tests
Opis:
In the external target experiment for heavy ion collisions in the HIRFL-CSR, Multi-Wire Drift Chambers are used to measure the drift time of charged particles to obtain the track information. This 128-channel high precision time measurement module is designed to perform the time digitization. The data transfer is based on a PXI interface to guarantee a high data rate. Test results show that a 100 ps resolution with a data transfer rate up to 40 MBps has been achieved; this module has also been proven to function well with the detector through a commissioning test.
Źródło:
Metrology and Measurement Systems; 2013, 20, 2; 275-286
0860-8229
Pojawia się w:
Metrology and Measurement Systems
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Ferrite Decarburization of High Silicon Spring Steel in Three Temperature Ranges
Autorzy:
Zhao, F.
Zhang, C. L.
Liu, Y. Z.
Powiązania:
https://bibliotekanauki.pl/articles/350822.pdf
Data publikacji:
2016
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
surface decarburization
steel
oxidation
carbon diffusion
Opis:
Surface decarburization of high silicon spring steel in ambient air was studied. The experimental results confirmed the decarburized mechanism under AC1 temperature, in the temperature range of AC1-AC3 and AC3-G. Under AC1 temperature, pearlite spheroidization and surface decarburization are carried out simultaneously and pearlite spheroidization is reinforced. Considering the oxidation loss depth, the “true ferrite decarburized depth” at 850 °C (AC3-G) is still smaller than that at 760°C (AC1-AC3). That is because an “incubation period” must pass away before ferrite decarburization occurs in the temperature range of AC3-G, and the ferrite decarburized rate is limited to being equal to the partial decarburized rate.
Źródło:
Archives of Metallurgy and Materials; 2016, 61, 3; 1715-1722
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Mechanism and Kinetics Studies on Non-Isothermal Decomposition of Ludwigite in Inert Atmosphere
Autorzy:
Fu, X.
Chu, M.
Gao, L.
Liu, Z.
Powiązania:
https://bibliotekanauki.pl/articles/352128.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
ludwigite
non-isothermal decomposition
kinetics
activation energy
model function
Opis:
Ludwigite is the main available boron-bearing resource in China. In order to enrich the theory system and optimize its utilization processes, this paper study the mechanism and kinetics on non-isothermal decomposition of ludwigite in inert atmosphere by means of thermal analysis. Results show that, the decomposition of serpentine and szajbelyite is the main cause of mass loss in the process. At the end of decomposition, hortonolite and ludwigite are the two main phases in the sample. The average E value of structural water decomposition is 277.97 kJ/mol based on FWO method (277.17 kJ/mol based on KAS method). The results is proved to be accurate and reliable. The mechanism model function of structural water decomposition is confirmed by Satava method and Popescu method. The form of the most probable model function is G(α) = (1 – α)–1– 1 (integral form) and f (α) = (1 – α)2 (differential form), and its mechanism is chemical reaction. This is verified by the criterion based on activation energy of model-free kinetics analysis.
Źródło:
Archives of Metallurgy and Materials; 2018, 63, 3; 1217-1224
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
iTRAQ-based quantitative proteomics analysis reveals inhibitory mechanismsof the antimicrobial peptide MDAP-2 against Salmonella gallinarum
Autorzy:
Zhang, Y.
Yu, S.
Ying, X.
Jia, B.
Liu, L.
Liu, J.
Kong, L.
Pei, Z.
Ma, H.
Powiązania:
https://bibliotekanauki.pl/articles/2087299.pdf
Data publikacji:
2020
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
Salmonella gallinarum
AMP
iTRAQ
inhibitory mechanism
Źródło:
Polish Journal of Veterinary Sciences; 2020, 23, 3; 405-414
1505-1773
Pojawia się w:
Polish Journal of Veterinary Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
2D Structural Acoustic Analysis Using the FEM/FMBEM with Different Coupled Element Types
Autorzy:
Chen, L.
Zhao, W.
Liu, C.
Chen, H.
Powiązania:
https://bibliotekanauki.pl/articles/176330.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
boundary element method
finite element method
discontinuous boundary elements
acoustic fluid-structure interaction
fast multipole method
Opis:
A FEM-BEM coupling approach is used for acoustic fluid-structure interaction analysis. The FEM is used to model the structure and the BEM is used to model the exterior acoustic domain. The aim of this work is to improve the computational efficiency and accuracy of the conventional FEM-BEM coupling approach. The fast multipole method (FMM) is applied to accelerating the matrix-vector products in BEM. The Burton-Miller formulation is used to overcome the fictitious eigen-frequency problem when using a single Helmholtz boundary integral equation for exterior acoustic problems. The continuous higher order boundary elements and discontinuous higher order boundary elements for 2D problem are developed in this work to achieve higher accuracy in the coupling analysis. The performance for coupled element types is compared via a simple example with analytical solution, and the optimal element type is obtained. Numerical examples are presented to show the relative errors of different coupled element types.
Źródło:
Archives of Acoustics; 2017, 42, 1; 37-48
0137-5075
Pojawia się w:
Archives of Acoustics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Electrorefining of High Carbon Ferromanganese in Molten Salts to Produce Pure Ferromanganese
Autorzy:
Xiao, S.J.
Liu, W.
Gao, L.
Zhang, J.
Powiązania:
https://bibliotekanauki.pl/articles/353411.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
high carbon ferromanganese
electrorefining
molten salts
pure ferromanganese
Opis:
High carbon ferromanganese is used as a starting material to prepare pure ferromanganese by electrorefining in molten salts. High carbon ferromanganese was applied as the anode, molybdenum was the cathode and Ag/AgCl was the reference electrode. The anodic dissolution was investigated by linear polarization in molten NaCl-KCl system. Then potentiostatic electrolysis was carried out to produce pure ferromanganese from high carbon ferromanganese. The cathodic product was determined to be a mixture of manganese and iron by x-ray diffraction (XRD). The content of carbon in the product was analyzed by carbon and sulfur analyzer. The post-electrolysis anode was characterized by scanning electron microscope (SEM). The mechanism of the anode dissolution and the distribution of the main impurity of carbon and silicon after electrolysis were discussed.
Źródło:
Archives of Metallurgy and Materials; 2017, 62, 3; 1505-1509
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Prevalence of pathogenicity island ETT2 in Escherichia coli isolated from piglets with diarrhea in northeast of China
Autorzy:
Yuan, C.W.
Liu, W.X.
Hou, J.L.
Zhang, L.G.
Wang, G.Q.
Powiązania:
https://bibliotekanauki.pl/articles/2087783.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
Escherichia coli
pathogenicity island
ETT2
piglets
diarrhea
Źródło:
Polish Journal of Veterinary Sciences; 2018, 21, 1; 5-12
1505-1773
Pojawia się w:
Polish Journal of Veterinary Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Emerging of canine kobuvirus in dogsin China, 2015
Autorzy:
Liu, D.F.
Liu, X.
Li, Z.J.
F. Liu
Hu, X.L.
Li, Z.G.
Liu, C.G.
Ma, J.Z.
Powiązania:
https://bibliotekanauki.pl/articles/2087863.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
canine kobuvirus (CaKoV)
dogs
phylogenetic
VP1
China
Źródło:
Polish Journal of Veterinary Sciences; 2017, 4; 707-711
1505-1773
Pojawia się w:
Polish Journal of Veterinary Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Study on Friction and Wear Characteristics of Aluminum Alloy Hydraulic Valve Body and Its Antiwear Mechanism
Autorzy:
Rong, L.
Lunjun, Ch.
Ming, Su
Qi, Z.
Yong, Liu
Powiązania:
https://bibliotekanauki.pl/articles/382468.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
aluminum alloy
hydraulic valve body
oil leakage
friction and wear
stop aluminium
korpus zaworu hydraulicznego
wycieki oleju
tarcie i zużycie
Opis:
In order for the working status of the aluminum alloyed hydraulic valve body to be controlled in actual conditions, a new friction and wear design device was designed for the cast iron and aluminum alloyed valve bodies comparison under the same conditions. The results displayed that: (1) The oil leakage of the aluminum alloyed hydraulic valve body was higher than the corresponding oil leakage of the iron body during the initial running stage. Besides during a later running stage, the oil leakage of the aluminum alloyed body was lower than corresponding oil leakage of the iron body; (2) The actual oil leakage of different materials consisted of two parts: the foundation leakage that was the leakage of the valve without wear and wear leakage that was caused by the worn valve body; (3) The aluminum alloyed valve could rely on the dust filling furrow and melting mechanism that led the body surface to retain dynamic balance, resulting in the valve leakage preservation at a low level. The aluminum alloy modified valve body can meet the requirements of hydraulic leakage under pressure, possibly constituting this alloy suitable for hydraulic valve body manufacturing.
Źródło:
Archives of Foundry Engineering; 2017, 17, 1; 207-215
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Biosorption of Pb(II) and Zn(II) by Extracellular Polymeric Substance (Eps) of Rhizobium Radiobacter : Equilibrium, Kinetics and Reuse Studies
Autorzy:
Wang, L.
Yang, J.
Chen, Z.
Liu, X.
Ma, F.
Powiązania:
https://bibliotekanauki.pl/articles/204971.pdf
Data publikacji:
2013
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
biosorption
extracellular polymeric substance
EPS
Rhizobium radiobacter
heavy metal
kinetics
Opis:
The extracellular polymeric substance (EPS) produced from Rhizobium radiobacter F2, designated as EPSF2 , was investigated as a biosorbent for the removal of Pb(II) and Zn(II) from aqueous solution. The optimum biosorption pH values were 5.0 for Pb(II) and 6.0 for Zn(II). Kinetics study revealed that the biosorption followed pseudo-first-order model well, and the equilibrium data fit the Langmuir model better. The adsorbed metal ions could be effectively desorbed by HCl. Desrobed EPSF2 regained 80% of the initial biosorption capacity after five cycles of biosorption-desorption-elution. These results demonstrated that EPSF2 could be a promising alternative for Pb(II) and Zn(II) removal from aqueous solution.
Źródło:
Archives of Environmental Protection; 2013, 39, 2; 129-140
2083-4772
2083-4810
Pojawia się w:
Archives of Environmental Protection
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies