Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Li, Y. L." wg kryterium: Autor


Tytuł:
Analytical Descriptions of Dynamic Softening Mechanisms for Ti-13Nb-13Zr Biomedical Alloy in Single Phase and Two Phase Regions
Autorzy:
Quan, G.-Z.
Wang, X.
Li, Y.-L.
Zhang, L.
Powiązania:
https://bibliotekanauki.pl/articles/353917.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
biomedical titanium alloy
flow stress
dynamic recovery
dynamic recrystallization
dynamic softening
Opis:
Dynamic softening behaviors of a promising biomedical Ti-13Nb-13Zr alloy under hot deformation conditions across dual phase α + β and single phase β regions were quantitatively characterized by establishing corresponding dynamic recovery (DRV) and dynamic recrystallization (DRX) kinetic models. A series of wide range hot compression tests on a Gleeble-3500 thermo-mechanical physical simulator were implemented under the strain rate range of 0.01-10 s−1 and the temperature range of 923-1173 K. The apparent differences of flow stress curves obtained in dual phase α + β and single phase β regions were analyzed in term of different dependence of flow stress to temperature and strain rate and different microstructural evolutions. Two typical softening mechanisms about DRV and DRX were identified through the variations of a series of stress-strain curves acquired from these compression tests. DRX is the dominant softening mechanism in dual phase α + β range, while DRV is the main softening mechanism in single phase β range. The DRV kinetic model for single phase β region and the DRX kinetic model for dual phase α + β region were established respectively. In addition, the microstructures of the compressed specimens were observed validating the softening mechanisms accordingly.
Źródło:
Archives of Metallurgy and Materials; 2017, 62, 4; 2029-2043
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Specific emitter identification using geometric features of frequency drift curve
Autorzy:
Zhao, Y.
Wui, L.
Zhang, J.
Li, Y.
Powiązania:
https://bibliotekanauki.pl/articles/200575.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
specific emitter identification
geometric features
frequency drift
adaptive fractional spectrogram
support vector machine
emiter
cechy geometryczne
dryf częstotliwości
spektrogram
Opis:
Specific emitter identification (SEI) is a technique for recognizing different emitters of the same type which have the same modulation parameters. Using only the classic modulation parameters for recognition, one cannot distinguish different emitters of a same type. To solve the problem, new features urgently need to be developed for recognition. This paper focuses on the common phenomenon of frequency drift, defines geometric features of frequency drift curve and, finally, proposes a practical algorithm of specific emitter identification using the geometric features. The proposed algorithm consists of three processes: instantaneous frequency estimation based on the adaptive fractional spectrogram, feature extraction of frequency drift curve based on geometric methods for describing a curve and recognition process based on support vector machine. Simulation results show that the identification rate is generally more than 98% above –5 dB of signal to noise ratio (SNR), and real data experiment verifies the practical performance of the proposed algorithm.
Źródło:
Bulletin of the Polish Academy of Sciences. Technical Sciences; 2018, 66, 1; 99-108
0239-7528
Pojawia się w:
Bulletin of the Polish Academy of Sciences. Technical Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Pharmacokinetics of diclofenac sodium injection in swine
Autorzy:
Yang, H.F.
Li, Y.J.
Li, Y.Y.
Huang, C.
Huang, L.X.
Bu, S.J.
Powiązania:
https://bibliotekanauki.pl/articles/2087550.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
diclofenac sodium injection
pharmacokinetics
bioavailability
swine
HPLC
Źródło:
Polish Journal of Veterinary Sciences; 2019, 2; 423-426
1505-1773
Pojawia się w:
Polish Journal of Veterinary Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Perspectives on novel vaccine development
Autorzy:
Wang, Y.B.
Wang, L.P.
Li, P.
Powiązania:
https://bibliotekanauki.pl/articles/2087687.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
vaccination
vaccinology
novel vaccine development
perspectives
Źródło:
Polish Journal of Veterinary Sciences; 2018, 21, 3; 643-649
1505-1773
Pojawia się w:
Polish Journal of Veterinary Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Comparative analysis of the empirical seismic vulnerability of typical structures in multiple intensity zones
Autorzy:
Li, S. Q.
Yu, T. L.
Chen, Y. S.
Powiązania:
https://bibliotekanauki.pl/articles/230122.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
sejsmiczność
porównanie podatności
analiza podatności
dane empiryczne
baza danych sejsmicznych
MDI
struktura typowa
seismicity
vulnerability comparison
vulnerability analysis
empirical data
seismic database
typical structure
Opis:
To study the difference in seismic vulnerability of multiple typical structures in multiple intensity zones, the seismic damage of 7099 buildings of Dujiangyan masonry structure (MS), reinforced concrete structure (RC) and bottom frame seismic wall masonry (BFM) in the 2008 Wenchuan earthquake in China is summarized and analysed. First, a statistical analysis of the data is carried out, the empirical seismic vulnerability matrix and model curves are established by considering the number of storeys, the age and the fortification factors.The vulnerability curves of the cumulative exceeding probability of the empirical seismic damage and the grade of the seismic damage in multiple intensity zones are shown. The mean damage index vulnerability matrix model is proposed and verified using the empirical seismic damage matrix of typical structures.
Źródło:
Archives of Civil Engineering; 2019, 65, 3; 167-183
1230-2945
Pojawia się w:
Archives of Civil Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Detection of IL-1β, IL-6 and TNF-αin Sprague-Dawely rats’ atrophic thymus induced by lipopolysaccharide
Autorzy:
Zhong, Y.B.
Zhang, X.L.
Lv, M.Y.
Hu, X.F.
Li, Y.
Powiązania:
https://bibliotekanauki.pl/articles/2087664.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
lipopolysaccharide
pro-inflammatory cytokines
thymus atrophy
rat
Źródło:
Polish Journal of Veterinary Sciences; 2018, 21, 3; 589-597
1505-1773
Pojawia się w:
Polish Journal of Veterinary Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Friction and Wear Behavior of 201HT Cast Aluminum Alloy with Various Competitive Material
Autorzy:
Li, R.
Chen, L. J.
Su, M.
Zeng, Q.
Li, H.
Liu, Y.
Powiązania:
https://bibliotekanauki.pl/articles/382627.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
casting
aluminum alloy
friction and wear
competitive material
odlewanie
stop aluminium
tarcie i zużycie
materiał konkurencyjny
Opis:
The friction and wear properties of 201HT aluminum alloys and the corresponding competitive coupons were tested on an electro-hydraulic servo face friction and wear testing machine (MM-U10G). The microstructures of the competitive coupons were investigated by scanning electron microscopy (SEM) and consequently the corresponding friction and wear mechanisms were studied. The results demonstrated that: (1) the best competitive material of friction and wear performance of the 201HT was the 201HTC. (2) the 201HTC modified by carbon following the initial mill for oil storage of the micro-groove to be produced, increased the corresponding lubrication performance reduced the friction coefficient and wear rate effectively. (3) the 201HT-201HTC could obtain both better friction and wear mainly due to the initial process of grinding following the 201HT plastic deformation occurred in the surface and the formation of a series of re-melting welding points, whereas the 201HT material hardness would be similar to the 201HTC material hardness, which led into the competitive material friction and wear performance improvement.
Źródło:
Archives of Foundry Engineering; 2017, 17, 2; 55-62
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect of overlying water pH, dissolved oxygen and temperature on heavy metal release from river sediments under laboratory conditions
Autorzy:
Huang, Y.
Zhang, D.
Xu, Z.
Yuan, S.
Li, Y.
Wang, L.
Powiązania:
https://bibliotekanauki.pl/articles/204852.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
heavy metal
release
river sediment
Opis:
The heavy metal release experiments were conducted in the laboratory to examine the effects of 3 factors - pH, dissolved oxygen (DO), and temperature on the metal release from sediments taken from the Huangpu River. The metal concentrations in the dry sediments ranged from 0.030 to 0.296 mg g-1 for Cr, 0.021 to 0.097 mg g-1 for Ni, 0.014 to 0.219 mg g-1 for Cu, 0.035 mg to 0.521 mg g-1 for Zn, 0.0002 to 0.001 mg g-1 for Cd and 0.023 to 0.089 mg g-1 for Pb. Most of the metals found in the sediments were in the form of residual fraction, the exchangeable fraction consisted of only a small portion of total metals. The average dissolved metal concentrations in the overlying water during the 13-day period under different conditions were ranging from 0.82 to 1.93 μg L-1 for Cr, 1.08 to 4.19 μg L-1 for Ni, 40.79 to 82.28 μg L-1 for Cu, 20.30 to 29.96 μg L-1 for Zn, 1.57 to 4.07 μg L-1 for Cd, and 22.26 to 75.50 μg L-1 for Pb, respectively. Statistical interpretation of the data indicated that pH (7, 8, 9), dissolved oxygen DO (1.0 and 5.0 mg L-1) and temperature (4, 16, 25°C) had no significant effects on the heavy metal release under the studied conditions. Cu and Pb had the highest release flux, while Cd, Pb and Cu had higher mobility. The main factors controlling the metals release might be the inherent characters of metals and sediments.
Źródło:
Archives of Environmental Protection; 2017, 43, 2; 28-36
2083-4772
2083-4810
Pojawia się w:
Archives of Environmental Protection
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Detection of multilayer cavities by employing RC-DTH air hammer system and cavity auto scanning laser system
Wykrywanie pustek obejmujących kilka warstw podłoża przy wykorzystaniu układu złożonego z młota pneumatycznego wgłębnego z odwrotnym obiegiem płuczki RC-DTH i automatycznego układu laserowego do skanowania
Autorzy:
Luo, Y.
Li, L.
Peng, J.
Yin, K.
Li, P.
Gan, X.
Zhao, L.
Su, W.
Powiązania:
https://bibliotekanauki.pl/articles/219542.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
multilayer cavities detection
RC-DTH air hammer
drill bit
cavity auto scanning laser system
wykrywanie pustek przechodzących przez liczne warstwy górotworu
młot pneumatyczny wgłębny z odwrotnym obiegiem płuczki
urządzenie wiertnicze
laserowy skaner pustek
Opis:
The subterranean cavities are seriously threatened to construction and mining safety, and it’s important to obtain the exact localization and dimensions of subterranean cavities for the planning of geotechnical and mining activities. Geophysical investigation is an alternative method for cavity detection, but it usually failed for the uncertainly solution of information and data obtained by Geophysical methods. Drilling is considered as the most accurate method for cavity detection. However, the conventional drilling methods can only be used for single cavity detection, and there is no effective solution for multilayer cavities detection have been reported. In this paper, a reverse circulation (RC) down-the-hole (DTH) air hammer system with a special structured drill bit is built and a cavity auto scanning laser system based on laser range finding technique was employed to confirm the localization and dimensions of the cavities. This RC-DTH air hammer system allows drilling through the upper cavities and putting the cavity auto scanning laser system into the cavity area through the central passage of the drill tools to protect the detection system from collapsing of borehole wall. The RC-DTH air hammer system was built, and field tests were conducted in Lanxian County Iron Ore District, which is located in Lv Liang city of Shan Xi province, the northwest of china. Field tests show that employing the RC-DTH air hammer system assisted by the cavity auto scanning laser system is an efficiency method to detect multilayer cavities.
Podziemne wgłębienia i pustki stanowią poważne zagrożenie dla budowli oraz dla działalności górniczej; dlatego też podstawowym zagadnieniem jest ich dokładna lokalizacja i określenie wymiarów. Jest to niezbędne dla planowania prac geotechnicznych i wydobywczych. Badania geofizyczne są alternatywną metodą wykrywania podziemnych zagłębień, zazwyczaj jednak okazują się nieskuteczne ze względu na niepewność rozwiązań oraz danych uzyskiwanych za pomocą metod geofizycznych. Wykonanie odwiertu jest najdokładniejszą metodą wykrywania zagłębień i pustek, jednakże konwencjonalne metody prowadzenia wierceń pozwalają na wykrycie jednego tylko zagłębienia, nie ma też skutecznego rozwiązania kwestii istnienia zagłębień i pustek przechodzących przez liczne warstwy górotworu. W pracy omówiono zastosowanie układu młota pneumatycznego wgłębnego z odwrotnym obiegiem płuczki, wyposażonego w odpowiednie urządzenie wiertnicze, oraz układu skanera laserowego wykorzystującego technikę dalmierza do potwierdzania lokalizacji pustek i ich wymiarów. Prezentowany młot umożliwia dokonanie odwiertu w zagłębieniach i pustkach znajdujących się w warstwach wierzchnich, następnie w zagłębieniu tym umieszczane jest laserowe urządzenie skanujące powierzchnię komory wprowadzane poprzez główny kanał w urządzeniu wiertniczym, tak by zabezpieczyć skaner na wypadek osunięcia się ścian otworu. Układ składający się z młota pneumatycznego zbudowano i przetestowano w warunkach polowych w zagłębiu miedziowym w okręgu Lanxian, w pobliżu miasta LV Liang w prowincji Shan Xi, w północno-zachodnich Chinach. Badania przeprowadzone w terenie wykazały, że zastosowanie układu złożonego z młota pneumatycznego wgłębnego RC-DTH wraz z laserowym skanerem jest skuteczną metodą wykrywania pustek przechodzących przez liczne warstwy.
Źródło:
Archives of Mining Sciences; 2015, 60, 4; 1041-1052
0860-7001
Pojawia się w:
Archives of Mining Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Design of Acoustic Tubes Array and Application to Measuring Acoustic Loads in Supersonic Airflow
Autorzy:
Wei, L.
Li, M.
Fu, Q.
Fan, Y.
Yang, D.
Powiązania:
https://bibliotekanauki.pl/articles/176750.pdf
Data publikacji:
2014
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
acoustic load
acoustic tubes array
near field measurement
supersonic airflow
Opis:
In the acoustic fatigue experiment for hypersonic vehicle in simulated harsh service environment on ground, acoustic loads on the surface of test pieces of the vehicle need to be measured. However, for the normal microphones without high temperature resistance ability, the near field sound measurement cannot be achieved. In this work, on the basis of previous researches, an acoustic tubes array is designed to achieve the near field measurement of acoustic loads on the surface of the test piece in the supersonic airflow with high temperature achieved by coherent jet oxygen lance. Firstly, the process of designing this acoustic tubes array is introduced. Secondly, the equality of phase differences at the front and at the end of the tubes is stated and proved using a phase differences test with an acoustic tubes array whose design is presented in this text; therefore, the phase differences of signals acquired by microphones can be directly applied to beamforming algorithm to determine the acoustic load source. Finally, using above mentioned acoustic tubes array, measurement of acoustic load, with and without a test piece in the supersonic airflow made by the coherent jet oxygen lance, is conducted respectively, and the measurements results are analyzed.
Źródło:
Archives of Acoustics; 2014, 39, 3; 395-402
0137-5075
Pojawia się w:
Archives of Acoustics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Experimental and numerical study of the uniaxial compressive stress-strain relationship of a rock mass with two parallel joints
Autorzy:
Xiong, L. X.
Yuan, H. Y.
Zhang, Y.
Zhang, K. F.
Li, J. B.
Powiązania:
https://bibliotekanauki.pl/articles/231076.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
masa skalna łączona
złącze równoległe
siła szczytowa
jointed rock mass
parallel joint
peak strength
Opis:
A “rock bridge”, defined as the closest distance between two joints in a rock mass, is an important feature affecting the jointed rock mass strength. Artificial jointed rock specimens with two parallel joint fractures were tested under uniaxial compression and numerical simulations were carried out to study the effects of the inclination of the rock bridge, the dip angle of the joint, rock bridge length, and the length of joints on the strength of the jointed rock mass. Research results show: (1) When the length of the joint fracture, the length of the rock bridge, and the inclination of the rock bridge stay unchanged, the uniaxial compressive strength of the specimen gradually increases as the inclination of the joint fracture increases from 0° to 90°. (2) When the length of the joint fracture, the length of the rock bridge, and the inclination of the joint fracture stay unchanged, the uniaxial compressive strength of the specimen shows variations in trends with the inclination of the rock bridge increasing from 30° to 150° (3). In the case when the joint is angled from the vertical loading direction, when the dip angle of the joint fracture, the inclination of the rock bridge, and the length of the rock bridge stay unchanged, the uniaxial compressive strength of the specimen gradually decreases with an increasing length of joint fracture. When the dip angle of the joint fracture, the inclination of the rock bridge, and the length of the joint fracture stay unchanged, the uniaxial compressive strength of the specimen does not show a clear trend with an increase of the length of the rock bridge.
Źródło:
Archives of Civil Engineering; 2019, 65, 2; 67-80
1230-2945
Pojawia się w:
Archives of Civil Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A multiplex PCR for simultaneous detection of classical swine fever virus, African swine fever virus, highly pathogenic porcine reproductive and respiratory syndrome virus, porcine reproductive and respiratory syndrome virus and pseudorabies in swines
Autorzy:
Hu, L.
Lin, X.Y.
Yang, Z.X.
Yao, X.P.
Li, G.L.
Peng, S.Z.
Wang, Y.
Powiązania:
https://bibliotekanauki.pl/articles/30249.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Opis:
In this assay, we developed and evaluated a multiplex PCR (mPCR) for its ability in detecting multiple infections of swine simultaneously. Four pairs of primers were used to detect five viruses. Specific primers were designed for classical swine fever virus (CSFV), African swine fever virus (ASFV) and pseudorabies (PRV). A pair of primers was designed prudently for two different types of porcine reproductive and respiratory syndrome virus that respectively were porcine reproductive and respiratory syndrome virus (PRRSV), highly pathogenic porcine reproductive and respiratory syndrome virus (HP-PRRSV). The detection limits of the mPCR were 1.09×10⁴, 1.50×10³, 2.10×10³, 1.30×10³ and 8.97×10² copies/reaction for CSFV, ASFV, HP-PRRSV, PRRSV and PRV, respectively. A total of 49 clinical specimens were tested by the mPCR, and the result showed that co-infection by two or three viruses was 51%. In conclusion, the PCR is a useful tool for clinical diagnosis of not only single infections but also mixed infections in swines.
Źródło:
Polish Journal of Veterinary Sciences; 2015, 18, 4
1505-1773
Pojawia się w:
Polish Journal of Veterinary Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Using an Interdigital Micromixer for Separation of In3+ from Zinc Hydrometallurgical Process with D2EHPA as an Extractant
Autorzy:
Li, C.
Jiang, F.
Ju, S.
Peng, J.
Wei, Y.
Zhang, L.
Powiązania:
https://bibliotekanauki.pl/articles/356090.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
interdigital micromixer
solvent extraction
mass transfer coefficient
indium
stripping
Opis:
Experiments were performed in an interdigital micromixer with 30 microchannels (40 μm width of each channel) to separate In3+, Fe3+ and Zn2+ from sulfate solutions using Di-(2-ethylhexyl)phosphoric acid (D2EHPA) as the extractant. The effects of pH, extractant concentration and flow rate on the extraction efficiency and flow rate on mass transfer coefficient of In3+, Fe3+ and Zn2+ were investigated. At a phase flow rate of 7.0 mL/min and initial solution pH of 0.423, the extraction efficiency of In3+, Fe3+ and Zn2+ was 99.29%, 3.43% and 2.54%, respectively and mass transfer coefficient of In3+, Fe3+ and Zn2+ was 144.307 s-1,1.018 s-1 and 0.750 s-1. Then, the loaded organic phase was stripped in an interdigital micromixer. At a phase flow rate of 9.0 mL/min and HCl concentration of 160 g/L, stripping efficiency of In3+ was 98.92% and mass transfer coefficient of In3+ was 169.808 s-1, while concentration of Fe3+ and Zn2+ was lower than 0.005 g/L with good separation of In3+ from Fe3+ and Zn2+.
Źródło:
Archives of Metallurgy and Materials; 2017, 62, 2A; 873-878
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Magnolol inhibits Streptococcus suis-induced inflammation and ROS formation via TLR2/MAPK/NF-κB signaling in RAW264.7 cells
Autorzy:
Wang, J.
Sun, Y.
Zhang, L.
Xu, W.
You, J.
Lu, H.
Song, Y.
Wei, J.
Li, L.
Powiązania:
https://bibliotekanauki.pl/articles/2087779.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
magnolol
Streptococcus suis
Toll-like receptor2
mitogen-activated protein kinase
nuclear factor Kappa B
Źródło:
Polish Journal of Veterinary Sciences; 2018, 21, 1; 111-118
1505-1773
Pojawia się w:
Polish Journal of Veterinary Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Triplex qRT-PCR with specific probe for synchronously detecting Bovine parvovirus, bovine coronavirus, bovine parainfluenza virus and its applications
Autorzy:
Geng, J.
Niu, Y.
Wei, L.
Li, Q.
Gong, Z.
Wei, S.
Powiązania:
https://bibliotekanauki.pl/articles/2087278.pdf
Data publikacji:
2020
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
bovine parvovirus
bovine coronavirus
bovine parainfluenza virus
qRT-PCR
specificity
sensitivity
Źródło:
Polish Journal of Veterinary Sciences; 2020, 23, 4
1505-1773
Pojawia się w:
Polish Journal of Veterinary Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies