Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę ""Janke"" wg kryterium: Wszystkie pola


Wyświetlanie 1-14 z 14
Tytuł:
DC characteristics of the SiC Schottky diodes
Autorzy:
Janke, W.
Hapka, A.
Oleksy, M.
Powiązania:
https://bibliotekanauki.pl/articles/202279.pdf
Data publikacji:
2011
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
silicon carbide
Schottky diodes
static characteristics
high-temperature
Opis:
The isothermal and non-isothermal characteristics of silicon carbide Schottky diodes in the wide range of currents and ambient temperatures are investigated in this paper. The measurements of the diodes characteristics have been performed with the use of a pulse method, with fast registration of measurement points after the diode current turning on, or with the use of a fully static method, in which the self-heating phenomenon is taken into account. Apart from the measurements, the series of numerical experiments, giving the isothermal and non-isothermal characteristics as a result, were executed. The complex, accurate numerical procedures as well as simplified analytical calculations were implemented. A good conformity of all calculation and measurement results have been obtained. In the presented investigations, for relatively high currents and ambient temperatures, the influence of self-heating on the SiC Schottky diodes static characteristics is significant. The large (even 4 V for the ambient temperature 300.C ) values of voltages corresponding to the nominal diode currents have been observed.
Źródło:
Bulletin of the Polish Academy of Sciences. Technical Sciences; 2011, 59, 2; 183-188
0239-7528
Pojawia się w:
Bulletin of the Polish Academy of Sciences. Technical Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Output characteristics of step-down (Buck) power converter
Autorzy:
Janke, W.
Bączek, M.
Walczak, M.
Powiązania:
https://bibliotekanauki.pl/articles/201669.pdf
Data publikacji:
2012
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
DC-DC converters
output characteristics
load transients
Opis:
The output characteristics of switched-mode dc-dc buck power converter are discussed. The shape of output characteristics is especially important for converters used for supplying modern processors. An output impedance is usually used for description of output characteristics. Many efforts are described in the literature to obtain the satisfastory features of closed-loop output impedance. Another approach, presented in the paper, is based on the concept of the output voltage response corresponding to the load conductance change, and is expressed by hr transmittance. Simulations of output characteristics of the buck converter in frequency and in time-domain have been performed for the ideal case as well as for a more realistic situation, with the parasitic resistances of converter elements included. The measurement results differ substantially from characteristics calculated for an ideal converter and are in good consistency with simulations including parasitics.
Źródło:
Bulletin of the Polish Academy of Sciences. Technical Sciences; 2012, 60, 4; 751-755
0239-7528
Pojawia się w:
Bulletin of the Polish Academy of Sciences. Technical Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Averaged models of pulse-modulated DC-DC power converters. Part I. Discussion of standard methods
Autorzy:
Janke, W.
Powiązania:
https://bibliotekanauki.pl/articles/140859.pdf
Data publikacji:
2012
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
power converters
pulse width modulation (PWM)
BUCK
BOOST
buck-boost
averaged models
Opis:
The averaged models of switch-mode DC-DC power converters are discussed. Two methods of averaged model derivation are considered - the first, based on statespace averaging and the second, on the switch averaging approach. The simplest converters: BUCK, BOOST and BUCK-BOOST working in CCM (continuous conduction mode) or DCM are taken as examples in detailed considerations. Apart from the ideal converters, the more realistic case of converters with parasitic resistances is analyzed. The switch averaging approach is used more frequently than the other and is believed to be more convenient in practical applications. It is shown however, that in the deriving the averaged models based on the switch-averaging approach, some informalities have been made, which may be the source of errors in the case of converters with parasitic resistances, or working in DCM mode.
Źródło:
Archives of Electrical Engineering; 2012, 61, 4; 609-631
1427-4221
2300-2506
Pojawia się w:
Archives of Electrical Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Equivalent circuits for averaged description of DC-DC switch-mode power converters based on separation of variables approach
Autorzy:
Janke, W.
Powiązania:
https://bibliotekanauki.pl/articles/200524.pdf
Data publikacji:
2013
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
switch-mode power converter
BUCK
BOOST
averaged models
equivalent circuits
Opis:
Large-signal and small-signal averaged models of basic switch-mode DC-DC power converters: BUCK (step-down) and BOOST (step-up) are presented. Models are derived with the separation of variables approach and have the form of equivalent circuits, suitable for a circuit simulation. Apart from equivalent circuits, small-signal transmittances of converters for CCM and DCM modes are discussed. Parasitic resistances of all components of converters are taken into account. A few examples of simulations and measurement results of selected converter characteristics are also presented. It is shown, that neglecting parasitic resistances (often met in works of other authors) may lead to serious errors in an averaged description of converters.
Źródło:
Bulletin of the Polish Academy of Sciences. Technical Sciences; 2013, 61, 3; 711-723
0239-7528
Pojawia się w:
Bulletin of the Polish Academy of Sciences. Technical Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Characteristic frequencies in averaged description of step-down (BUCK) DC-DC power converter
Autorzy:
Janke, W.
Powiązania:
https://bibliotekanauki.pl/articles/140412.pdf
Data publikacji:
2016
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
switch mode DC-DC converter
step-down converter
BUCK power converter
small-signal transmittances
sharacteristic frequencies
Opis:
In the description of small-signal transmittances of switch-mode power converters several characteristic frequencies are usually used, corresponding to poles and zeros of transmittances. The knowledge of these frequencies is important in the design of control circuits for converters and usually are assumed to be constant for a given power stage of a converter. The aim of the paper is to evaluate the influence of converter primary parameters and load conductance on characteristic frequencies. Analytical derivations and numerical calculations are performed for an ideal and non-ideal BUCK converter working in continuous or discontinuous conduction mode.
Źródło:
Archives of Electrical Engineering; 2016, 65, 4; 703-717
1427-4221
2300-2506
Pojawia się w:
Archives of Electrical Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Small-signal transmittances of DC-DC step-down PWM converter in various operation modes
Autorzy:
Janke, W.
Powiązania:
https://bibliotekanauki.pl/articles/141483.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
step-down converter
BUCK
CCM
DCM
averaged model
small-signal
transmittance
switch-averaging
separation of variables
Opis:
Small-signal transmittances: input-to-output and control-to-output of BUCK converter power stage working in CCM or DCM mode are discussed. Ideal converter case and converter with parasitic resistances are considered separately. Derivations of small-signal transmittances, based on different approaches to finding the converter averaged models, are presented and the results are compared. Apart from theoretical considerations, some results of numerical calculations are presented.
Źródło:
Archives of Electrical Engineering; 2015, 64, 3; 505-529
1427-4221
2300-2506
Pojawia się w:
Archives of Electrical Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Small-signal input characteristics of step-down and step-up converters in various conduction modes
Autorzy:
Janke, W.
Walczak, M.
Powiązania:
https://bibliotekanauki.pl/articles/200514.pdf
Data publikacji:
2016
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
pulse converter
BUCK
BOOST
small-signal models
input characteristics
przetwornica impulsowa
charakterystyki wejściowe
Opis:
Small-signal input characteristics of BUCK and BOOST DC-DC power converters in continuous conduction and discontinuous conduction mode have been presented. Special attention is paid to characteristics in discontinuous conduction mode. The input characteristics are derived from the general form of averaged models of converters. The frequency dependence of input admittance and other input characteristics has been observed in a relatively low-frequency range. The analytical formulas derived in the paper are illustrated by numerical calculations and verified by experiments with a laboratory model of BOOST converter. A satisfying level of conformity of calculations and measurements has been obtained.
Źródło:
Bulletin of the Polish Academy of Sciences. Technical Sciences; 2016, 64, 2; 265-270
0239-7528
Pojawia się w:
Bulletin of the Polish Academy of Sciences. Technical Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Averaged models of pulse-modulated DC-DC power converters. Part II. Models based on the separation of variables
Autorzy:
Janke, W.
Powiązania:
https://bibliotekanauki.pl/articles/140855.pdf
Data publikacji:
2012
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
power converters
pulse width modulation (PWM)
BUCK
buck-boost
BOOST
averaged models
Opis:
The separation of variables approach to formulate the averaged models of DC-DC switch-mode power converters is presented in the paper. The proposed method is applied to basic converters such as BUCK, BOOST and BUCK-BOOST. The ideal converters or converters with parasitic resistances, working in CCM and in DCM mode are considered. The models are presented in the form of equation systems for large signal, steady-state and small-signal case. It is shown, that the models obtained by separation of variables approach differ in some situations from standard models based on switch averaging method.
Źródło:
Archives of Electrical Engineering; 2012, 61, 4; 633-654
1427-4221
2300-2506
Pojawia się w:
Archives of Electrical Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Large-signal input characteristics of selected DC–DC switching converters. Part I. Continuous conduction mode
Autorzy:
Janke, Włodzimierz
Bączek, Maciej
Kraśniewski, Jarosław
Walczak, Marcin
Powiązania:
https://bibliotekanauki.pl/articles/141117.pdf
Data publikacji:
2020
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
boost
buck
CCM
DC–DC converters
flyback
input characteristics
Opis:
Large-signal input characteristics of three DC–DC converter types: buck, boost and flyback working in the continuous conduction mode (CCM), obtained by simulations and measurements are investigated. The results of investigations are presented in the form of the analytical formulas and the exemplary results of the measurements and two forms of simulations: based on the full description of the converter components and on the averaged models. The parasitic resistances of the converter components are included in the simulations and their influence on the simulation results is discussed.
Źródło:
Archives of Electrical Engineering; 2020, 69, 3; 739-750
1427-4221
2300-2506
Pojawia się w:
Archives of Electrical Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Large-signal input characteristics of selected DC–DC switching converters, Part II. Discontinuous conduction mode
Autorzy:
Janke, Włodzimierz
Bączek, Maciej
Kraśniewski, Jarosław
Walczak, Marcin
Powiązania:
https://bibliotekanauki.pl/articles/949887.pdf
Data publikacji:
2020
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
boost
buck
DC–DC converters
DCM
flyback
input characteristics
Opis:
Large-signal input characteristics of three DC–DC converter types: buck, boost and flyback working in the discontinuous conduction mode (DCM), obtained by precise large signal PSpice simulations, calculations based on averaged models and measurements are presented. The parasitic resistances of the converter components are included in the simulations. The specific features of the input characteristics in the DCM and the differences between the continuous conduction mode (CCM) and DCM are discussed.
Źródło:
Archives of Electrical Engineering; 2020, 69, 4; 801-813
1427-4221
2300-2506
Pojawia się w:
Archives of Electrical Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Influence of output conductance on characteristic frequencies of switch mode BUCK and BOOST converter
Autorzy:
Janke, W.
Walczak, M.
Powiązania:
https://bibliotekanauki.pl/articles/140387.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
pulse converters
BUCK
BOOST
small-signal models
control-to-output
characteristics
DCM boundary
characteristic frequencies
Opis:
Characteristic frequencies corresponding to poles and zeros of small-signal control-to-output transfer functions of popular DC-DC converters (BUCK and BOOST) are analyzed. The main attention is paid to influence of load conductance on the characteristic frequencies for converters working in continuous conduction mode (CCM) as well as in discontinuous conduction mode (DCM). Parasitic resistances of all converter components are included in calculations. In addition the improved description of CCMDCM boundary is presented. The calculations are verified experimentally and good consistency of the results is observed.
Źródło:
Archives of Electrical Engineering; 2017, 66, 1; 165-178
1427-4221
2300-2506
Pojawia się w:
Archives of Electrical Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Averaged model of a buck DC–DC converter for single-loop description of current-mode control
Autorzy:
Janke, Włodzimierz
Bączek, Maciej
Kraśniewski, Jarosław
Powiązania:
https://bibliotekanauki.pl/articles/141131.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
averaged model
buck converter
continuous conduction mode
peak current
mode control
Opis:
: Averaged models: an AC large signal, DC and AC small signals of a currentcontrolled buck converter are described. Only peak current mode control of a converter working in the continuous conduction mode (CCM) is considered. The model derivation differs from the typical approaches presented in the literature and doesn’t refer to the multiloop concept of a current controlled converter. The separation of the variables method is used in the model derivation. The resulting models are presented in the form of an equation set and equivalent circuits. The calculations based on the presented models are verified by measurements and full-wave PSpice simulations.
Źródło:
Archives of Electrical Engineering; 2019, 68, 4; 891-905
1427-4221
2300-2506
Pojawia się w:
Archives of Electrical Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Comparison of transient states in step-down power converter (BUCK) in continuous and discontinuous conduction mode
Autorzy:
Janke, W.
Walczak, M.
Powiązania:
https://bibliotekanauki.pl/articles/200450.pdf
Data publikacji:
2014
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
step-down converter
BUCK
transient states
CCM
DCM
step-down konwerter
stany przejściowe
Opis:
The object of this paper is a step-down (BUCK) power converter working in the continuous conduction mode (CCM) or discontinuous conduction mode (DCM). Two types of transient states in a converter have been analyzed and observed experimentally: slow transients, described by averaged models of a converter and fast transients, in the course of a single switching period. The averaged models of converter working in CCM, presented in various sources are similar, with some differences concerning only the description of parasitic effects. The averaged models for DCM depend on the adopted modeling method. Models obtained by the switch averaging approach are second-order models (containing two reactive elements in equivalent circuit representation). Models obtained by the separation of variables approach are first-order models. The experimental results given in this paper show the first-order type of transients. Another group of experiments concern fast transients in the course of a single switching period. The oscillations of inductor voltage in the part of a switching period are observed for DCM.
Źródło:
Bulletin of the Polish Academy of Sciences. Technical Sciences; 2014, 62, 4; 773-778
0239-7528
Pojawia się w:
Bulletin of the Polish Academy of Sciences. Technical Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Large-signal averaged models of the non-ideal flyback converter derived by the separation of variables
Autorzy:
Janke, W.
Bączek, M.
Kraśniewski, J.
Powiązania:
https://bibliotekanauki.pl/articles/200399.pdf
Data publikacji:
2020
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
switch mode converter
flyback
averaged models
separation of variables
large-signal simulation
Opis:
The main topic of the paper is the large signal averaged model of a switch-mode flyback power converter. The use of the large-signal averaged models of switching converters allows for fast simulation of power systems. The known averaged models of a flyback are based on the state-space averaging or switch-averaging approach. The model presented in the paper is derived with the use of the separation of variables approach and include parasitic resistances of all converter components. The limitations of the model accuracy are discussed. The calculations based on the averaged model are compared with detailed full-wave simulations and measurements results.
Źródło:
Bulletin of the Polish Academy of Sciences. Technical Sciences; 2020, 68, 1; 81-88
0239-7528
Pojawia się w:
Bulletin of the Polish Academy of Sciences. Technical Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-14 z 14

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies