Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "B." wg kryterium: Autor


Wyświetlanie 1-3 z 3
Tytuł:
Microstructure and Creep Resistance of Mg-Al-Ca-Sr Alloys
Mikrostruktura i odporność na pełzanie stopów magnezu Mg-Al-Ca-Sr
Autorzy:
Rzychoń, T.
Adamczyk-Cieślak, B.
Powiązania:
https://bibliotekanauki.pl/articles/355876.pdf
Data publikacji:
2014
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
cast magnesium alloys
Mg-Al-Ca-Sr alloys
microstructure
mechanical properties
odlewnicze stopy magnezu
stopy Mg-Al-Ca-Sr
mikrostruktura
właściwości mechaniczne
Opis:
Microstructure and creep properties of cast Mg-Al-Ca-Sr alloys have been investigated. The microstructure was characterized using light microscopy, scanning and transmission electron microscopy. Phase identification was made by EBSD technique and by SAED analysis. The measurement of volume fraction of intermetallic phases was performed using quantitative metallography. Creep tests were performed at 180°C and at applied stress between 45 and 90 MPa. Microstructure of tested alloys composed of α-Mg grains and intermetallic compounds in the interdendritic regions. It was found that the addition of calcium and strontium improves creep resistance at 180°C.
W artykule przedstawiono wyniki badań mikrostruktury i odporności na pełzanie odlewniczych stopów magnezu Mg-Al-Ca-Sr. Mikrostrukturę badano metodami mikroskopii świetlnej, skaningowej i elektronowej transmisyjnej. Identyfikacji faz dokonano metodami EBSD i dyfrakcji elektronów (TEM). Pomiar udziałów objętościowych faz dokonano za pomocą metalografii ilościowej. Badania odporności na pełzanie przeprowadzono w temperaturze 180°C przez 100 h. Mikrostruktura badanych stopów składa się z ziaren roztworu stałego α-Mg i faz międzymetalicznych w przestrzeniach międzydendrytycznych. Stwierdzono, że dodatek wapnia i strontu poprawia odporność na pełzanie w temperaturze 180°C.
Źródło:
Archives of Metallurgy and Materials; 2014, 59, 1; 329-334
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The Influence of Strontium on the Microstructure of Cast Magnesium Alloys Containing Aluminum and Calcium
Wpływ strontu na mikrostrukturę odlewniczych stopów magnezu z dodatkiem aluminium i wapnia
Autorzy:
Rzychoń, T.
Dybowski, B.
Kiełbus, A.
Powiązania:
https://bibliotekanauki.pl/articles/354343.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
magnesium alloys
microstructure
cast Mg-Al-Ca-Sr alloys
stopy magnezu
mikrostruktura
odlewnicze stopy magnezu
Opis:
The structure of Mg-9Al-2Ca-xSr alloys is composed of a-Mg grains and the Al2Ca and Al4 Sr phases in the interdendritic areas. These phases are formed as a result of eutectic reactions. Globular particles of the Al8Mn5 phase are observed within the interior of the grains. The addition of strontium to Mg-9Al-2Ca-0.4Mn alloys causes the formation of the Al4Sr phase and increase of its volume fraction with increasing strontium levels. Moreover, increase of the strontium amount causes a decrease of aluminum content in the a-Mg solid solution.
W artykule przedstawiono wyniki badań wpływu strontu na mikrostrukturę odlewniczych stopów magnezu zawierających aluminium i wapń. Jakościową analizę fazową przeprowadzono za pomocą rentgenowskiej analizy fazowej i metody EBSD. Do ilościowej analizy fazowej zastosowano metody analizy obrazu. Po odlewaniu mikrostruktura stopów zawierających 9% mas. aluminium, 2% mas. wapnia, 0,3% mas. strontu i 0,4% mas. manganu składa się z roztworu stałego α-Mg oraz wydzieleń faz międzymetalicznych Al2Ca, Al4Sr i Al8Mn5. Zwiększenie zawartości strontu do 2% mas. powoduje zwiększenie udziału objętościowego fazy Al4Sr i zmniejszenie stężenia aluminium w roztworze stałym α-Mg.
Źródło:
Archives of Metallurgy and Materials; 2015, 60, 1; 167-170
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Mechanical Properties and Microstructure of WE43 Magnesium Matrix Composite Reinforced SiC Particles
Autorzy:
Rzychoń, T.
Dybowski, B.
Gryc, A.
Dudek, M.
Powiązania:
https://bibliotekanauki.pl/articles/380522.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
magnesium matrix composite
microstructure
WE43 alloy
stir casting
stop magnezu
kompozyt
stop WE43
mikrostruktura
Opis:
Magnesium alloys containing yttrium and neodymium are known to have high specific strength, good creep and corrosion resistance up to 250°C. The addition of ceramic particles strengthens the metal matrix composite resulting in better wear and creep resistance while maintaining good machinability. In the present study, WE43 magnesium matrix composite reinforced with SiC particles were fabricated by stir casting. The microstructure of the composite was investigated by optical microscopy, quantitative metallography, scanning electron microscope and XRD analysis. Microstructure characterization of WE43 MMC showed homogeneous reinforcement distribution and presence of the small amount of porosity at the interface. A thin layer consists of zirconium-rich particles was observed at the interface. In the microstructure, inclusions of the yttrium oxide were found. The presence of SiC particles assisted in improving hardness and in decreasing the ultimate tensile strength, yield tensile strength and elongation.
Źródło:
Archives of Foundry Engineering; 2015, 15, 1 spec.; 99-102
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-3 z 3

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies