Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Zhang, Y. H." wg kryterium: Autor


Tytuł:
Fiber diameter influence on optical transport of dielectric particles along subwavelength optical fibers
Autorzy:
Zhang, Y.
Lei, H.
Li, B.
Powiązania:
https://bibliotekanauki.pl/articles/173195.pdf
Data publikacji:
2013
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
optical transport
optical scattering force
optical gradient force
subwavelength optical fiber
evanescent field
Opis:
We investigate a fiber diameter influence on optical transport of dielectric particles along subwavelength optical fibers using a near infrared laser of 1.55 μm wavelength. Theoretical analysis indicates that at 1.55 μm, the evanescent field at the fiber surface increases at first and then decreases with an increase of the fiber diameter from 600 nm to 1.6 μm, exhibiting a maximum at the fiber diameter of 950 nm. Based on three-dimensional finite-difference time-domain simulations, optical scattering forces acted on the dielectric particles and transport velocities of the particles were calculated for two fibers in the diameters of 930 nm and 1.5 μm. To support the theoretical analysis, experiments were performed using the two fibers to transport SiO2 particles (sizes of 530 nm and 1.5 μm) and TiO2 particles (size of 1.5 μm). The results show that with the same laser power launched into the two fibers, larger transport velocities can be obtained along the 930 nm diameter fiber.
Źródło:
Optica Applicata; 2013, 43, 4; 707-718
0078-5466
1899-7015
Pojawia się w:
Optica Applicata
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Utilization of cement and other additives for solidification/stabilization of soil contaminated simultaneously with Cd2+ and Pb2+ ions
Autorzy:
Xi, Y.
Wang, H.
Guo, L.
Zhang, M.
Powiązania:
https://bibliotekanauki.pl/articles/208172.pdf
Data publikacji:
2018
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
cement
soil pollution
X-ray diffraction
dyfrakcja rentgenowska
zanieczyszczenie gleby
Opis:
Various additives, including cement, quicklime, fly ash, montmorillonite, sepiolite and their proportions were employed to stabilize/solidify artificially prepared soils contaminated simultaneously with two kinds of ions such as Cd2+ and Pb2+. The unconfined compressive strength of the stabilized soils was measured to estimate the possibility of recycling. The efficiency of Cd2+ and Pb2+ immobilization in contaminated soils was also evaluated using the US EPA TCLP toxicity test. X-ray diffraction (XRD) and scanning electron microscopy (SEM) were used to elucidate the mechanisms responsible for the immobilization of heavy metals. The experimental results demonstrate that in terms of soils simultaneously polluted with Cd2+ and Pb2+ ions, the curing effect of fly ash is better than that of montmorillonite and sepiolite. When Cd2+ and Pb2+ coexist in soil specimens, the curing is more difficult than for Cd2+ or Pb2+ alone, which is antagonistic mechanism. Also, the leaching concentration of Cd2+ and Pb2+ gradually decreases upon increasing pH when pH < 8. For pH ≥ 8, the leaching concentration of Cd2+ and Pb2+ reached a minimum. Besides, the results of XRD and SEM are in agreement with those of the strength and leaching tests.
Źródło:
Environment Protection Engineering; 2018, 44, 1; 61-73
0324-8828
Pojawia się w:
Environment Protection Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Removal of clofibric acid and diclofenac during anaerobic digestion of sewage sludge
Autorzy:
Zhou, H.
Zhang, Q.
Zhang, Q
Ma, L.
Tu, B.
Li, H.
Zhou, Y.
Powiązania:
https://bibliotekanauki.pl/articles/207894.pdf
Data publikacji:
2013
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
fermentacja beztlenowa
osady ściekowe
farmaceutyki
kwas klofibrowy
diklofenak
anaerobic digestion
sewage sludge
pharmaceuticals
clofibric acid
diclofenac
Opis:
Removal of two acidic pharmaceuticals, clofibric acid and diclofenac, present in sewage sludge using two kinds of anaerobic digestions was investigated. The effective isolation and purification pretreatment to extract the target compounds from the sewage sludge samples was firstly established, followed by gas chromatography-mass spectrometry (GC-MS) analysis to identify and quantify them. Under mesophilic conditions, the removal efficiencies for clofibric acid and diclofenac with the initial concentrations of 5 μg /dm3 were up to 95% and 97%. After thermophilic anaerobic digestion, the removal efficiency could be increased to 99.3% for clofibric acid, however, it did not increase for diclofenac. In general, anaerobic digestion could effectively remove the target compounds from the sewage sludge (all above 90%).
Źródło:
Environment Protection Engineering; 2013, 39, 4; 63-77
0324-8828
Pojawia się w:
Environment Protection Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect of two-stage stirred pulp-mixing on coal flotation
Autorzy:
Gui, X.
Wang, Y.
Zhang, H.
Li, S.
Powiązania:
https://bibliotekanauki.pl/articles/110764.pdf
Data publikacji:
2014
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
mixing
stirred
two stage
fine coal
flotation
Opis:
Stirred pulp-mixing is performed before coal flotation. In this study, a two-stage stirred pulpmixing tank was designed based on the single-stirred process to intensify the mixing effect of pulp and flotation reagents. A tank has a pitched-impeller opening-type turbine. Stirred pulp-mixing and flotation experiments were conducted on a sample of anthracite fine coal (-0.5mm) from the Xuehu Coal Preparation Plant in Henan Province, China. The results of the two-stage stirred pulp-mixing were compared with those of a single-stage stirred pulp-mixing in terms of flotation performance. Compared with the single-stage stirred pulp-mixing, two mixing areas and double-layer impeller were able to strengthen the energy input to the stirred system, thereby improving the mixing efficiency of flotation reagents and coal particles in the pulp. The two-stage stirred pulp-mixing significantly increased the flotation feed rate of the cyclone-static micro-bubble flotation column and concentrate yield, enhanced the combustible matter recovery effect of coarse particles at a suitable flotation feed rate, and ensured the recovery effect of fine particles at high flotation feed rate.
Źródło:
Physicochemical Problems of Mineral Processing; 2014, 50, 1; 299-310
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Experimental study on triboelectrostatic beneficiation of wet fly ash using Microwave Heating
Autorzy:
Li, H.
Chen, Y.
Zhang, X.
Zhao, Y.
Tao, Y.
Li, C.
He, X.
Powiązania:
https://bibliotekanauki.pl/articles/110399.pdf
Data publikacji:
2016
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
wet fly ash
triboelectrostatic beneficiation
microwave heating
efficiency
Opis:
Triboelectrostatic beneficiation, as a physical method, of fly ash cannot only meet the technical requirements of fly ash application but also recycle of an unburned carbon as a useful energy source. The aim of this study was to investigate the feasibility of improving efficiency of triboelectrostatic beneficiation of wet fly ash using microwave heating. The wet fly ash with different moisture contents had an average loss-on-ignition of 12.56%. The fly ash samples were heated in a microwave oven before the experiments. The experimental conditions were electric field voltage of 40 kV and air flux ranging from 12 to 30 m3/h. The influence of the microwave heating on the wet fly ash triboelectrostatic beneficiation was discussed under the conditions of different microwave intensity and irradiation time. The results indicated that the removal rate and recycle rate of the unburned carbon showed a significant increase performance as the wet fly ash was processed by the microwave heating which was attributed to changes of moisture contents and dielectric constants caused by the microwave heating. The feasibility had been verified according to the experimental study on fly ash with different moisture contents. It can be concluded that the microwave heating process was efficiently applied for the wet fly ash triboelectrostatic beneficiation.
Źródło:
Physicochemical Problems of Mineral Processing; 2016, 52, 1; 328-341
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Polarization properties of Gaussian–Schell model quantization field in a turbulent marine-atmosphere
Autorzy:
Zhao, Y.
Xia, M.
Wang, Q.
Li, Y.
Hu, Z.
Sun, H.
Zhang, Y.
Powiązania:
https://bibliotekanauki.pl/articles/173639.pdf
Data publikacji:
2016
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
polarization fluctuation
Gaussian–Schell model
marine-atmosphere
Kolmogorov turbulence
Opis:
Polarization properties of Gaussian–Schell model quantization field propagating through the Kolmogorov turbulence of a marine-atmosphere channel are studied based on the degree of quantum polarization. The effective photon annihilation and creation operators of Gaussian–Schell model quantization field propagation in a marine-atmosphere are developed by making use of the extended Huygens–Fresnel integral of quantum field. The effects of the outer scale on the degree of polarization can be neglected. As the source transverse coherent width, the number of received photons, the inner scale of turbulent eddies, and the source transverse radius decrease or the re- fractive index structure parameter increases, the degree of polarization decreases. In theory, we find that the polarization fade of marine-atmosphere turbulence channels is larger than that of terrene-atmosphere turbulence channels under same transport parameters and the channel with a stronger turbulence strength will possess a larger detection area of a polarization signal, which have potentially important implications for free-space quantum key distribution.
Źródło:
Optica Applicata; 2016, 46, 3; 335-345
0078-5466
1899-7015
Pojawia się w:
Optica Applicata
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Flotation behaviour and surface characteristic of anosovite in a sodium oleate solution
Autorzy:
Wang, Y.
Wen, S.
Zhang, J.
Wu, D.
Xian, Y.
Shen, H.
Powiązania:
https://bibliotekanauki.pl/articles/110766.pdf
Data publikacji:
2017
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
anosovite
sodium oleate
flotation
adsorption
Opis:
Properties of anosovite in titanium slag, anosovite flotation response in a collector solution of sodium oleate, and adsorption behaviour of sodium oleate on the mineral surface were studied in the present work using XRD, Raman spectra, flotation tests, zeta potential analysis, FTIR and XPS. The results show that the anosovite crystal contains magnesium, and its chemical composition is Mg0.09Ti2.91O5. The chemical bonds on the anosovite surface mainly comprise Ti-O bonds. Micro-flotation tests indicate that anosovite has better floatability at a wide pH range and the recovery reaches 88% at pH=6, when the dosage of sodium oleate is only 4·10−6 mol/dm3. The point of zero charge of anosovite was determined near pH 3.2 by the zeta potential measurement. In the flotation process, chemical adsorption occurs between the carboxyl of sodium oleate and the titanium sites on the anosovite surface.
Źródło:
Physicochemical Problems of Mineral Processing; 2017, 53, 2; 714-723
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Study on recovery of lead, zinc, iron from jarosite residues and simultaneous sulfur fixation by direct reduction
Autorzy:
Wang, Y.
Yang, H.
Zhang, W.
Song, R.
Jiang, B.
Powiązania:
https://bibliotekanauki.pl/articles/110933.pdf
Data publikacji:
2018
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
jarosite
direct reduction
recovery
valuable metal
sulfur fixation
Opis:
Jarosite residues, which are generated in a zinc production plant by a hydrometallurgical process, contain a large amount of valuable metal components. In this study, a method was proposed for the recovery of lead, zinc and iron from the residues and simultaneous sulfur fixation through direct reduction followed by magnetic separation. The influences of the roasting temperature, roasting time and the concentration of SO2 gas in the direct reduction process were researched in detail. Results showed that the volatilization rates of lead, zinc and sulfur were 96.97%, 99.89% and 1.09%, respectively, and the iron metallization rate was 91.97% under optimal reduction conditions; roasting temperature 1523 K for 60 min. The magnetic concentrate with the iron content of 90.59% and recovery rate of 50.87% was obtained from the optimal reduction product by grinding and magnetic separation. The optimum fineness for separation 96.56% less than 37 μm accounted with magnetic field strength 24 kA/m. The theoretical analysis was carried out by thermodynamics, X-ray powder diffraction, gas analysis and scanning electron microscopy.
Źródło:
Physicochemical Problems of Mineral Processing; 2018, 54, 2; 517-526
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect of dispersion order on the spectral degree of polarization of stochastic electromagnetic pulsed beams
Autorzy:
Wang, H.
Ding, C.
Zhang, Y.
Zhao, Z.
Pan, L.
Powiązania:
https://bibliotekanauki.pl/articles/173625.pdf
Data publikacji:
2014
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
stochastic electromagnetic Bessel–Gauss pulsed beams
dispersive aperture lens
pulse
duration
temporal coherence length
Opis:
The analytical expression for the cross-spectral density function of stochastic electromagnetic Bessel–Gauss pulsed beams through a dispersive aperture lens is derived and used to study the changes in the spectral degree of polarization in an optical focus system. The changes in the spectral degree of polarization at the focal plane and on the z-axis are performed in the case of dispersion-free, dispersion of the first, second, and higher orders, respectively. It is shown that the dispersion affects the peak value of the spectral degree of polarization, and the higher order dispersion leads to a more obvious effect on the peak value of the spectral degree of polarization at the focal plane. On the z-axis, the spectral degree of polarization in the dispersion-free case is different form that in the dispersion case, however, the dispersion of different orders almost has the same effect on the spectral degree of polarization. The results obtained in this paper may be crucial for high precision laser detection.
Źródło:
Optica Applicata; 2014, 44, 1; 147-158
0078-5466
1899-7015
Pojawia się w:
Optica Applicata
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Research on a square Cassegrain-type solar concentrating reflector with a double pyramid
Autorzy:
Zhang, Y.
Yang, H.
Jiang, P.
Mao, S.
Yu, M.
Powiązania:
https://bibliotekanauki.pl/articles/174264.pdf
Data publikacji:
2016
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
concentrating reflector
double pyramidal
ray tracing
Opis:
A structure of a solar concentrating reflector is designed in this paper to improve the usage of solar energy. For the dark image which is the result of the secondary mirror in the new type of the Cassegrain solar concentrating system, a double pyramid system is used to improve this phenomenon. By eliminating the dark image, the system enhanced the concentration ratio and the working efficiency. Meanwhile, both the primary and secondary mirrors are shaped into a square section in order to get a better match with a square photovoltaic receiver. While the length of the primary mirror is 89m and the block ratio is 20%, the concentration ratio is equal to 118.86.
Źródło:
Optica Applicata; 2016, 46, 3; 461-471
0078-5466
1899-7015
Pojawia się w:
Optica Applicata
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Feature extraction of molten pool for laser welding quality real-time inspection
Autorzy:
Zhang, J
Yin, H
Huang, H
Yang, R
Yang, J
Li, Y
Powiązania:
https://bibliotekanauki.pl/articles/173597.pdf
Data publikacji:
2015
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
laser materials processing
process monitoring and control
image analysis
Opis:
This paper proposed an image feature extraction method for laser welding molten pool inspection based on cellular neural network. TC4 titanium alloy thin plates were welded by Nd:YAG pulsed laser. A coaxial machine vision system was designed to acquire molten pool images. An auxiliary lighting source was employed to improve the molten pool image quality. By analyzing molten pool images, the welding defects such as fenestration or insufficient depth were identified. These results can be used as a feedback signal for laser power control. Experimental results showed that the proposed method can be used to improve laser welding quality.
Źródło:
Optica Applicata; 2015, 45, 4; 523-533
0078-5466
1899-7015
Pojawia się w:
Optica Applicata
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Response of energy-size reduction to the control of circulating load in vertical spindle pulverizer
Autorzy:
Li, H.
He, Y.
Zhang, Y.
Ge, Z.
Xie, W.
Wang, S.
Li, K.
Powiązania:
https://bibliotekanauki.pl/articles/110803.pdf
Data publikacji:
2017
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
circulating load control
response of energy-size reduction
mixture grinding
energy efficiency
Opis:
In the vertical spindle pulverizer (VSP), the large circulation ratio and high ash and sulfur contents in circulating load would result in intensive energy consumption and low grinding efficiency. Although the control of circulating load would help increase the energy efficiency, no quantitative study has been conducted due to the high temperature and pressure in the closed VSP. In this study, response of energy-size reduction to the control of circulating load was studied by the experimental simulation method. Coal mixtures with fine/coarse ratio of 11:1, 8:1 and 6:1 were ground by a lab-scale roller mill. Energy-size reductions of the coarse coal were compared to evaluate the influence of circulating load control. Results showed that the product with the coarse coal increased by 30% when the specific breakage energy was 1.0 kWht–1 as the circulation ratio decreased from 11 to 6. Meanwhile, a breakage characteristic index of the coarse coal was two times higher due to the cushioning effect of fines. Besides, decrease of circulation ratio led to increase of the breakage rate of coarse coal, and the energy saving improved by 57%. With the same energy input of 2.0 kWht-1, the yield of –0.09 mm pulverized fuel (PF) increased from 22 to 43%. Therefore, controlling the circulating load is an effective method to improve the breakage rate of coarse coal and energy efficiency for PF generation.
Źródło:
Physicochemical Problems of Mineral Processing; 2017, 53, 2; 793-801
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analysis of the breakthrough phenomena during heavy metal elution from a column packed with municipal waste incineration ash
Autorzy:
Zhang, W.
Yang, Y.
Suganuma, H.
Kato, S.
Suzuki, S.
Kojima, T.
Powiązania:
https://bibliotekanauki.pl/articles/206904.pdf
Data publikacji:
2018
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
calcium compounds
dissolution
heavy metals
leaching
particle size
związki wapnia
rozpuszczanie
metale ciężkie
ługowanie
wielkość cząstek
Opis:
At some point during acid leaching column tests of heavy metals from municipal waste incineration ash, sudden and rapid elution of harmful elements was observed which was called the breakthrough (BT) phenomena. The mechanism was elucidated from the results of measurement of elemental and particle size distribution in the column and batch leaching tests as follows. At the first stage of experimental runs, CaCO3 was dissolved in acidic solution and pH profile along the bed is formed. Some of the minor elements of Zn and Al dissolved by acid at the upper part of the column are precipitated at bottom of the column, leading to the reduction of flow rate of the leachate solution. After leachate pH becomes low by the termination of dissolution of Ca, these deposits are dissolved and thus, the flow rate increases. Most of the trace elements behave as such, which causes the increase of harmful element concentrations in the eluate. Some drastic concentration increase of harmful elements in leachate may occur even after the long period of pseudo stable dissolution behavior in the land-fill site.
Źródło:
Environment Protection Engineering; 2018, 44, 3; 63-78
0324-8828
Pojawia się w:
Environment Protection Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A study of bubble-particle interactions in a column flotation process
Autorzy:
Cheng, G.
Shi, C.
Yan, X.
Zhang, Z.
Xu, H.
Lu, Y.
Powiązania:
https://bibliotekanauki.pl/articles/109635.pdf
Data publikacji:
2017
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
particle
bubble
column flotation
collision
attachment
detachment
Opis:
Bubble-particle interactions play an important role in flotation. This study examines the behaviour of bubble clusters in a turbulent flotation cell. Particularly, the bubble-particle interaction characteristics in flotation are investigated. The bubble size in a flotation column was measured using an Olympus i-SPEED 3 high-speed camera. Relationships between the circulating volume, bubble size and bubble terminal velocity were discussed. Probabilities of collision, attachment, detachment and acquisition between bubbles and particles in different circulating volumes were calculated based on the flotation kinetic theory. Using the extended Derjaguin–Landau–Verwey–Overbeek (EDLVO) theory, the relationship between the potential energy and distance in bubble-particle interaction was analysed. The results demonstrated that as the circulating volume increased, the bubble size and velocity decreased. When the circulating volume increased from 0.253 to 0.495 m3/h, the bubble diameter decreased from 511 to 462 μm, and the corresponding bubble velocity decreased from 43.1 to 37.5 mm/s. When the circulating volume remained constant as the particle size increased, probabilities of collision, attachment, detachment and acquisition increased. When the particle size remained constant as the circulating volume increased, these probabilities also increased. At a constant circulating volume as the particle size increased, the absolute value of the total potential energy between the particle and bubble increased. When the distance between the bubble and particle was 30 nm, the energy barrier appeared.
Źródło:
Physicochemical Problems of Mineral Processing; 2017, 53, 1; 17-33
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Optical image encryption by using diffractive imaging with special constraint in the input plane
Autorzy:
Wang, Z.
Wang, H.
Yang, X.
Zhang, P.
Hou, C.
Qin, Y.
Powiązania:
https://bibliotekanauki.pl/articles/173781.pdf
Data publikacji:
2016
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
optical encryption
diffractive imaging
bilinear interpolation
Opis:
In order to simplify the optical setup and the encryption process, a diffractive-imaging-based optical encryption system using a single diffraction pattern is proposed. A predesigned binary mask is placed before the plaintext in the encryption process, and three randomly distributed phase only masks are placed in the optical path. Only one diffraction pattern needs to be recorded as ciphertext by CCD. In the decryption process, an iterative phase retrieval algorithm is applied, in which the predesigned binary mask acts as a support constraint in the input plane. After the iterative process, an interpolation operation for the zero-valued pixels is also implemented. The effectiveness and robustness of the proposal are demonstrated by numerical simulation results.
Źródło:
Optica Applicata; 2016, 46, 1; 57-69
0078-5466
1899-7015
Pojawia się w:
Optica Applicata
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies