Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Wang, Han" wg kryterium: Autor


Wyświetlanie 1-8 z 8
Tytuł:
Adsorption of quaternary ammonium salt hydrophobic modifiers on the α-quartz (001) surface: a density functional theory study
Autorzy:
Liu, Chunfu
Wang, Weitao
Wang, Han
Zhu, Chenyu
Ren, Bao
Powiązania:
https://bibliotekanauki.pl/articles/24085768.pdf
Data publikacji:
2023
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
α-quartz (001) surface
quaternary ammonium salt
density functional theory
adsorption mechanism
Opis:
To investigate the adsorption mechanism of quaternary ammonium salt on the α-quartz (001) surface, the adsorption models of hydrophobic modifiers 1231, 1431, 1631 and 1831 were constructed and simulated using the density functional theory (DFT). Results indicate that the adsorption energy of quaternary ammonium salt increases with the increase of carbon chain length, and the adsorption en-ergy reaches the maximum at 18 carbon atoms; however, the adsorption capacity of 1631 is weak owing to the carbon chain deflection. Based on the Mulliken bond population analysis, reagent 1831 has the strongest interaction with α-quartz (001) surface compared with 1231, 1431 and 1631; and during the adsorption process, charge transfer and electrostatic attraction occur between the reagent and α-quartz (001) surface with similar degrees of charge transfer observed. This study emphasizes that electrostatic attraction plays a key role in the adsorption process, while the week hydrogen bonding plays a second-ary role.
Źródło:
Physicochemical Problems of Mineral Processing; 2023, 59, 3; art. no. 170260
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Study on bubble characteristics of flotation column in hematite reverse cationic flotation process
Autorzy:
Wang, Weizhi
Han, Jikang
Powiązania:
https://bibliotekanauki.pl/articles/1450070.pdf
Data publikacji:
2020
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
column flotation
bubble generator
GE-609
circularity
bubble diameter
bubble Sauter diameter
Opis:
In the self-designed flotation column simulation system, the foaming characteristics of the micro-bubble countercurrent contact flotation column used in the hematite cation column flotation process are systematically studied. The objective of this study is to investigate the bubble generation by a bubble generator in the flotation column. The bubble image was obtained by the high-speed camera recorder, and the bubble diameter was calculated and analyzed by image processing software. The distribution characteristics of the bubble size under different aeration conditions and with different reagent concentrations were investigated. The results show that as the aeration increases, the average diameter bubbles increases, the bubble size distribution changes from narrow to wide, and the number of small bubbles decreases. The cationic collector GE-609 can change the bubble shape. As the concentration increases, the bubble shape gradually changes from an irregular shape to a standard spherical shape. When the concentration of GE-609 exceeds 2.5 mg/dm3, the average circularity C of the bubbles in the bubble group stabilizes at 1, and the increase in concentration no longer changes the bubble shape. GE-609 also has an efficient foaming effect, as the concentration increases, the bubble diameter distribution changes significantly, the proportion of small bubbles increases, and the proportion of large bubbles decreases significantly. When the critical concentration is exceeded, the bubble diameter distribution probability density peak width no longer changes significantly. Compared with the two types of alcohol foaming agents, GE-609 produces a bubble Sauter diameter close to that of 2-octanol and slightly lower than terpineol.
Źródło:
Physicochemical Problems of Mineral Processing; 2020, 56, 1; 64-75
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Study on gas holdup characteristics of micro-bubble countercurrent contacting flotation column
Autorzy:
Han, Jikang
Wang, Weizhi
Li, Ran
Powiązania:
https://bibliotekanauki.pl/articles/1449071.pdf
Data publikacji:
2020
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
column flotation
conductance method
pressure drop method
gas holdup
GE-609
Opis:
In order to explore the gas holdup distribution of the microbubble countercurrent contact flotation column in the hematite column cationic reverse flotation process, respectively using conductance method and pressure drop method for air and water as experimental medium characteristics research of flotation column, the research group carries on the gas holdup, examines the aeration quantity, the fill medium and cation collector alkyl polyamine ether (An amine collector―GE609 which consists of four elements: carbon, hydrogen, oxygen and nitrogen)within the column on the influence of the axial and radial gas holdup. The results show that the axial gas holdup from the bottom of the column to the top of the column increases with the increase of height in the range of 0.050.07dm3/s. The radial distribution of gas holdup generally shows the distribution law of “intermediate high, low on both sides”. After the filling medium is added into the column, the radial gas holdup is evenly distributed compared with the empty column, and the gas holdup is increased. Due to the high foaming performance of GE-609, the gas holdup in the column can be increased by changing the amount of aeration and the concentration of the reagent, which can exceed 60% at the maximum. Like other alcohol foaming agents, as time passes, the effect of GE-609 weakens and the gas holdup in the column gradually decreases. The addition of quantitative HCl can improve the foaming performance of GE-609, and the gas holdup in the column is significantly improved and the stability is enhanced.
Źródło:
Physicochemical Problems of Mineral Processing; 2020, 56, 4; 665-675
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Influence of optical Airy transform on non-diffracting propagation distance of finite energy Airy beams
Autorzy:
Chu, Xingchun
Liu, Rongjiang
Wang, Xiang
Han, Zhongxiang
Ni, Yanhui
Powiązania:
https://bibliotekanauki.pl/articles/2033885.pdf
Data publikacji:
2021
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
physics optics
non-diffracting beam
finite energy Airy beam
non-diffracting propagation distance
optical Airy transform
Opis:
Finite energy Airy beams (FEAB) generated in laboratory have a short non-diffracting propagation distance (NDPD), which restricts its application in laser communication, laser detection and other fields. Effects of optical Airy transform (OAT) on NDPD of FEAB is analyzed. By comparing the theoretical formulas of the FEAB before and after the OAT, we find that when the transform parameter α of the OAT is larger than zero, the transverse scaling factor of the transformed FEAB is greater than that before the transformation, while the transformed exponential decay factor is smaller than that before the transformation. Using the Huygens–Fresnel diffractive integral, we derive the propagation formula of the transformed FEAB. Initial intensity distribution of FEAB before and after the OAT is compared. Propagation dynamics of the transformed FEAB with different α is numerically simulated and its NDPD is quantitatively evaluated. Results show that: with the increase of α, side lobes of the transformed FEAB increase, its main lobe and side lobes become wider than that before the transformation, and the inclination of the propagation trajectory decreases. When α is greater than half of the transverse scaling factor, the NDPD of the transformed FEAB increases rapidly.
Źródło:
Optica Applicata; 2021, 51, 4; 473-482
0078-5466
1899-7015
Pojawia się w:
Optica Applicata
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Influence of polysorbate 80 on the flotation of zinc oxide ores with amines
Autorzy:
Xie, Qiaoling
Wang, Dandan
Han, Zhichao
Tao, Huchun
Liu, Sitong
Powiązania:
https://bibliotekanauki.pl/articles/2146852.pdf
Data publikacji:
2022
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
polysorbate 80
pretreated amines
zinc oxide
flotation
Opis:
In this study, the influence of polysorbate 80 on zinc oxide flotation was investigated with an amine collector. The results indicated that the pretreatment of amines with polysorbate 80 enhanced the Zn grade and recovery obtained using zinc oxide flotation. Desliming prior to flotation is not suggested based on the results of this study. The appropriate temperature for flotation was as low as 8 °C, and this flotation method also could be applied to different types of zinc oxide ores. Under optimum flotation conditions, a concentrate with a Zn grade of 48.34% and a Zn recovery of 95.97% was obtained.
Źródło:
Physicochemical Problems of Mineral Processing; 2022, 58, 1; 149--158
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Research on the mechanism of a mixed collector onto magnesite surface to improve the flotation separation of magnesite from hornblende
Autorzy:
Wang, Enlei
Li, Xiaoan
Dai, Shujuan
Li, Zhao
Zhao, Tonglin
Song, Baoxu
Han, Baisui
Powiązania:
https://bibliotekanauki.pl/articles/1445774.pdf
Data publikacji:
2021
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
magnesite
hornblende
mixed collector
flotation separation
Opis:
Low-grade magnesite is not effectively used mainly due to high silicon content, especially the separation of magnesite and hornblende. In this research, a novel mixture of sodium oleate and dodecyl phosphate collector was used to increase the flotation difference between magnesite and hornblende. Artificially mixed mineral concentrates grade 47.10% (MgO content) concentrate recovery of 84.45% was obtained by micro flotation test, the results showed that the mixed collector of sodium oleate and dodecyl phosphate played a better selective promotion role in the flotation of magnesite. The interaction mechanism of this mixed collector with hornblende and magnesite surfaces was investigated using Fourier transform infrared spectroscopy (FTIR), zeta potential, and X-ray photoelectron spectroscopy (XPS), which showed that the mixed collector in terms of magnesium selection was mainly adsorbed on these magnesium sites of magnesite, and the surface of magnesite thus became hydrophobic, allowing magnesite to float and separate from hornblende.
Źródło:
Physicochemical Problems of Mineral Processing; 2021, 57, 4; 125-138
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Kinetics of simultaneous recovering of Au and Ag from CTs by chloridizing volatilization methods
Autorzy:
Weiwei, Wang
Zhengyao, Li
Shanshan, Yang
Kai, Ma
Xin, Gao
Shaoqi, Han
Shaochun, Hou
Hecheng, Miao
Powiązania:
https://bibliotekanauki.pl/articles/27323663.pdf
Data publikacji:
2023
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
cyanide tailings
chloridizing volatilization
gold
silver
kinetics
Opis:
Cyanide Tailings (CTs) are known as hazardous resources that accumulate hundreds of millions of tons, threatening the ecological environment. This work proposes an eco-friendly and efficient way to recover gold and silver from CTs. The effects of calcium chloride dosage, silicon dioxide dosage, pellet moisture content, roasting temperature, and roasting time on Au and Ag chloridizing volatilization were studied. The kinetics of simultaneously recovering of gold and silver from cyanide Tailings by chlorination roasting was investigated. It was determined that the chloridizing volatilization rates increased with increasing calcium chloride dosage, temperature and decreasing silicon dioxide dosage, pellet moisture content. The chloridizing volatilization kinetics followed a shrinking core model, with inter-diffusion through gangue layer as the rate determining step. This finding is in accordance with the apparent activation energy (Ea) of 24.01 kJ•mol-1 (Au) and 24.62 kJ•mol-1 (Ag). The orders of reaction with respect to moisture content, temperature, calcium chloride dosage and silicon dioxide dosage were also achieved. The rate of reaction based on diffusion-controlled process can be expressed by semi-empirical equations. The control steps of the gold and silver recovery process were investigated by the kinetic study, which provided theoretical guidance for the optimization of the method.
Źródło:
Physicochemical Problems of Mineral Processing; 2023, 59, 6; art. no. 172522
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Research on new process for separation of silicon wafers and glass from decommissioned photovoltaic module
Autorzy:
Zhang, Jian wen
Wang, Hai dong
Zhang, Sheng guang
Liang, Han
Guo, Hui
Tao, Si-yao
Powiązania:
https://bibliotekanauki.pl/articles/2175425.pdf
Data publikacji:
2022
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
crystalline silicon photovoltaic modules
decommissioned photovoltaic modules
silicon
solar cell
tempered glass
vibration separation
Opis:
In view of the disadvantages of the existing electrostatic separation process of decommissioned photovoltaic modules, which can only achieve the separation of fine silicon wafers and glass and has high energy consumption, a new process to solve the efficient dry separation of coarse silicon wafers and glass in decommissioned photovoltaic modules is proposed- the vibration separation method. Based on the theoretical analysis of the vibration separation of flaky silicon wafer and polyhedral glass particles, the effects of feed size, feed amount, vibration voltage, vibration frequency, horizontal inclination angle and longitudinal inclination angle on the product indexes of wafer and glass separation were investigated by single factor experiment. The optimal experimental conditions were obtained as follows: feed particle size +0.83mm, feed amount 0.15 t/h, vibration voltage 190 V, vibration frequency 48 Hz, horizontal inclination Angle 8°, longitudinal inclination Angle 3°. Under this optimized condition, the content of metal Si in the obtained silicon wafer product is 84.47%, the recovery rate of is 83.73%, the content of impurity SiO2 is 1.09%, and the content of SiO2 in the obtained glass product is 65.69%, and the recovery rate is 98.95%, the impurity metal Si content is 0.56%. This study provides a research idea for the industrial separation of silicon wafers and glass from decommissioned photovoltaic modules.
Źródło:
Physicochemical Problems of Mineral Processing; 2022, 58, 6; art. no. 151679
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-8 z 8

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies