Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Qin, L." wg kryterium: Autor


Wyświetlanie 1-3 z 3
Tytuł:
Investigation of HFC-134a decomposition by combustion and its kinetic characteristics in a laboratory scale reactor
Autorzy:
Mi, T.
Han, J.
He, X.
Qin, L.
Powiązania:
https://bibliotekanauki.pl/articles/207909.pdf
Data publikacji:
2015
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
thermal decomposition
hydrochlorofluorocarbons
HFC
combustion
R134a
rozkład termiczny
hydrofluorokarbony
freony
spalanie
Opis:
Thermal decomposition of HFC-134a at 900–1000 K was investigated using a laboratory scale reactor. The experimental results indicate that the lower initial HFC-134a concentration and higher reaction temperature could enhance HFC-134a decomposition efficiency. Based on the results of measurements, it seems that the reaction order is around 1. Its activation energy (Ea) and the frequency factor (A) in the investigated temperature range are 300.5 kJ·mol–1 and 2.96×1014, respectively. The results demonstrate that 99.9% destruction efficiency could be achieved when HFC-134a/LPG is below 0.5 and the excess air ratio – above 0.6.
Źródło:
Environment Protection Engineering; 2015, 41, 4; 143-150
0324-8828
Pojawia się w:
Environment Protection Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Enhancing SO2 removal efficiency by lime modified with sewage sludge in a novel integrated desulfurization process
Autorzy:
Qin, L.
Han, J.
Chen, W.
Liu, Z.
He, M.
Xing, F.
Powiązania:
https://bibliotekanauki.pl/articles/950037.pdf
Data publikacji:
2017
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
sewage sludge
steel industry
sintering process
osad ściekowy
przemysł hutniczy
proces spiekania
Opis:
In China, the sintering process annually emitted around 1.5 million t SO2, representing 70% of SO2 produced from the iron and steel industry. Lime based sorbent was modified with municipal sewage sludge (MSS) and the influence of the modification on the desulfurization efficiency was investigated in a laboratory-scale novel integrated desulfurization (NID) reactor. The properties of modified sorbent were characterized by the Brunauer–Emmett–Teller (BET) analyzer and X-ray fluorescence (XRD) analyzer. BET surface area was increased from 17.48 to 46.68 m2g–1. when the MSS/lime ratio increased from 0 to 0.08. Ca4Al8Si8O32, Ca1.5SiO3.5, Na2Si2O5 and CaSiO3 found in the modified lime benefited for the increase of the BET surface area and pore volume. The effects of sewage sludge/CaO weight ratio, calcination temperature and hydration time on the desulfurization efficiency were also studied. SO2 removal efficiency was increased from 88.7% to 97.3% after using the lime modified with sewage sludge.
Źródło:
Environment Protection Engineering; 2017, 43, 4; 17-27
0324-8828
Pojawia się w:
Environment Protection Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Selective reduction of PbSO4 to PbS with carbon and flotation treatment of synthetic galena
Autorzy:
Zheng, Y.-X.
Liu, W.
Qin, W.-Q.
Han, J.-W.
Yang, K.
Luo, H.-L.
Powiązania:
https://bibliotekanauki.pl/articles/110717.pdf
Data publikacji:
2015
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
wastes
lead sulfate
reduction
carbon
lead sulfide
flotation
Opis:
In order to recover lead from the zinc leaching residues, a new technology involving selective reduction of lead sulfate to lead sulfide with carbon followed by flotation was investigated. The reduction thermodynamics of PbSO4 was discussed and the effects of molar ratio of C to PbSO4, reaction temperature and time were examined by thermogravimetry (TG) and XRD. Verification tests were further carried out to prove the conclusions of thermodynamic and TG analyses, and the transformation extent could reach 86.45% under the optimal roasting conditions. The prepared galena was then subjected to micro-flotation tests, and the highest lead recovery could reach up to 75.32%.
Źródło:
Physicochemical Problems of Mineral Processing; 2015, 51, 2; 535-546
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-3 z 3

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies