Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Li, S" wg kryterium: Autor


Tytuł:
Effect of moisture content in coal dust on filtration and cleaning performance of filters
Autorzy:
Li, J.
Li, S.
Zhou, F.
Powiązania:
https://bibliotekanauki.pl/articles/110692.pdf
Data publikacji:
2016
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
coal dust
moisture content
filtration
compressibility
adhesive force
Opis:
A large amount of fugitive coal dust is generated during the mining, transportation, and processing of coal. The moisture content of the coal dust has a significant influence on the dust collection performance of filters, although relatively few studies on this phenomenon exist. This study deals with six groups of coal dust samples with moisture contents ranging from 0 to 12 wt.% and tested the pressure drop as the coal dust was deposited onto three different types of filters. The specific resistance, compression coefficient, and porosity of the coal dust cake were analyzed, and the cake/filter adhesive force was tested using the reverse flow cleaning method. This research demonstrates that the influence of the moisture content on the specific resistance, compression coefficient, and porosity of the coal dust cake can be divided into two phases (according to the critical moisture content of 4 wt.%): first, as the moisture content increased from 0 to 4 wt.%, the cake resistance and compression coefficient increased and the cake porosity decreased; and second, as the moisture content increased from 4 to 12 wt.%, the cake resistance and compression coefficient decreased and the porosity increased. The coated and repellent filters possessed a lower adhesive force on the coal dust cake than the conventional filter. The comparison of all three of the filters revealed that the adhesive force between the repellent filter and the dust cake was the least sensitive to the moisture content.
Źródło:
Physicochemical Problems of Mineral Processing; 2016, 52, 1; 365-379
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Monte Carlo based angular analysis of multiple scattered photons for underwater optical imaging
Autorzy:
Li, S.
Wang, R.
Chen, G.
Powiązania:
https://bibliotekanauki.pl/articles/173322.pdf
Data publikacji:
2018
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
underwater imaging
turbid media
Monte Carlo method
multiple scattering
Opis:
Image contrast and visibility associated with underwater optical imaging systems are usually degraded by the absorbing and scattering effects of turbid waters. To improve the image contrast, laser-range-gate has been widely applied to underwater optical imaging systems. The work of Katsev et al. (Appl.Opt. 38(33), 1999, pp. 6849–6858) shows that the contrast of a shadow image is greater than that of the object image. The present paper outlines a Monte Carlo based simulation method of image formation for underwater optical imaging. It is found that the contrast of a shadow image varies with gate starting depths. The angular distribution of multiply scattered photons is obtained via semi-analytical models (Shengfu Li et al., Opt.Commun. 381, 2016, pp. 43–47). The simulated results show that increasing the gate starting depth can reduce the highly backscattered photons, thus can improve the image contrast.
Źródło:
Optica Applicata; 2018, 48, 2; 237-247
0078-5466
1899-7015
Pojawia się w:
Optica Applicata
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Plantar pressure analysis of above-knee amputee with a developed microprocessor-controlled prosthetic knee
Autorzy:
Cao, W.
Yu, H.
Meng, Q.
Li, S.
Powiązania:
https://bibliotekanauki.pl/articles/306983.pdf
Data publikacji:
2018
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
ciśnienie podeszwowe
proteza stawu kolanowego
analiza chodu
plantar pressure
above-knee amputee
microprocessor-controlled
prosthetic knee
gait analysis
Opis:
Human gait motion analysis was one useful method for lower limb prosthesis study. The most often measured parameters were plantar pressure, kinetic and kinematic parameters. It was indispensable for prosthetic knee design and performance assessment. The aim of this study was to analysis the plantar pressure in traumatic above-knee amputee equipped with a developed microprocessor-controlled prosthetic knee. Methods: The maximum force of forefoot and rearfoot, the average vertical reaction force and pressure and the centre of pressure (COP) offset trajectories of ten above-knee amputees under different walking speeds were obtained. Results: Both forefoot and rearfoot force were bigger in intact leg than prosthetic leg. As the speed increased, the pressure increased in both sides. Forefoot bore more pressure than rearfoot in both legs. The average vertical pressure and force both increased along with the increase of speed. The force and pressure of intact side were always bigger than the prosthetic side. The trend of COP and gait line of the prosthetic and intact side had no significant difference. The length of the gait line of prosthetic side was greater than the intact side. Conclusions: The results of this study exhibited reduced plantar pressure in the prosthetic side. The typical butterfly diagrams were produced during different walking speeds. It indicated that the stability of the microprocessor-controlled prosthetic knee could be guaranteed.
Źródło:
Acta of Bioengineering and Biomechanics; 2018, 20, 4; 33-40
1509-409X
2450-6303
Pojawia się w:
Acta of Bioengineering and Biomechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect of two-stage stirred pulp-mixing on coal flotation
Autorzy:
Gui, X.
Wang, Y.
Zhang, H.
Li, S.
Powiązania:
https://bibliotekanauki.pl/articles/110764.pdf
Data publikacji:
2014
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
mixing
stirred
two stage
fine coal
flotation
Opis:
Stirred pulp-mixing is performed before coal flotation. In this study, a two-stage stirred pulpmixing tank was designed based on the single-stirred process to intensify the mixing effect of pulp and flotation reagents. A tank has a pitched-impeller opening-type turbine. Stirred pulp-mixing and flotation experiments were conducted on a sample of anthracite fine coal (-0.5mm) from the Xuehu Coal Preparation Plant in Henan Province, China. The results of the two-stage stirred pulp-mixing were compared with those of a single-stage stirred pulp-mixing in terms of flotation performance. Compared with the single-stage stirred pulp-mixing, two mixing areas and double-layer impeller were able to strengthen the energy input to the stirred system, thereby improving the mixing efficiency of flotation reagents and coal particles in the pulp. The two-stage stirred pulp-mixing significantly increased the flotation feed rate of the cyclone-static micro-bubble flotation column and concentrate yield, enhanced the combustible matter recovery effect of coarse particles at a suitable flotation feed rate, and ensured the recovery effect of fine particles at high flotation feed rate.
Źródło:
Physicochemical Problems of Mineral Processing; 2014, 50, 1; 299-310
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Pretreatment of coking wastewater by an adsorption process using fine coking coal
Autorzy:
Gao, L.
Li, S.
Wang, Y.
Gui, X.
Xu, H.
Powiązania:
https://bibliotekanauki.pl/articles/110417.pdf
Data publikacji:
2016
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
coking coal
coking wastewater
adsorption
COD
phenol
Opis:
A new technique for pretreatment of coking wastewater is introduced based on the concept of circular economy. Coal is fed into a coking system after adsorption. This study validates the feasibility of using coking coal to adsorb organic pollutants in coking wastewater. The sorption kinetics and equilibrium sorption isotherms of coking coal for removal of chemical oxygen demand (COD) and phenol from coking wastewater was also discussed in this paper. Gas chromatograph/mass spectroscopy (GC/MS) was used to detect changes in the quality of coking wastewater. The results showed that when coking coal dosage was 120 g/dm3, 65% of COD and 34% of phenol in waste water can be removed after 40 min of agitation. The surface functional groups of coking coal before and after adsorption were observed with a Fourier transform infrared spectrometer. The kinetics of COD and phenol adsorption from coking wastewater by coking coal fitted the pseudo second-order model. The adsorption process of coking coal can be classified into two categories, namely, rapid and slow. The Freundlich isotherm provided a better fit with all adsorption isotherms than the Langmuir isotherm. Coking coal could be a suitable low-cost adsorbent for recalcitrant organic pollutants.
Źródło:
Physicochemical Problems of Mineral Processing; 2016, 52, 1; 422-436
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Fully-phase optical image encryption in diffractive-imaging scheme with QR-code-based random illumination
Autorzy:
Wang, Z.
Zhang, Y.
Gong, Q.
Li, S.
Qin, Y.
Powiązania:
https://bibliotekanauki.pl/articles/174126.pdf
Data publikacji:
2017
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
optical encryption
diffractive imaging
fully phase
phase retrieval algorithm
Opis:
Based on a fully phase encoding and phase retrieval algorithm, a diffractive-imaging-based optical encryption scheme with random illumination is proposed. In the encryption process, a QR code image is placed in the optic path to modulate the incident light and thus generate a random illumination, which has been demonstrated to enable the proposed scheme to resist the multi-slice ptychographic phase retrieval algorithm attack. The plaintext is phase-encoded, and then encrypted by two random phase masks. The diffraction pattern in the output plane is recorded as ciphertext by a CCD camera. For decryption, an iterative phase retrieval algorithm with median filtering operation is implemented. Simulation results demonstrate the effectiveness, security, and robustness of the proposal.
Źródło:
Optica Applicata; 2017, 47, 2; 233-243
0078-5466
1899-7015
Pojawia się w:
Optica Applicata
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Preparation, characterization and coagulation behaviour of a novel inorganic coagulant - polyferric(III)-magnesium(II) sulfate
Autorzy:
Liu, Z.
Li, S.
Zhang, H.
Nie, F.
Wang, Q.
Powiązania:
https://bibliotekanauki.pl/articles/207302.pdf
Data publikacji:
2013
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
coagulation
infrared spectroscopy
magnesium
wastewater treatment
textile wastewater
coagulant
koagulacja
spektroskopia w podczerwieni
magnez
oczyszczanie ścieków
ścieki włókiennicze
koagulant
Opis:
A novel coagulant, polyferric(III)-magnesium(II) sulfate (PFMS), was prepared. The preparation technology was optimized and the optimized PFMS product was used to treat actual textile wastewater. The performance of PFMS was evaluated and compared with those of conventional coagulants. X-ray diffraction and infrared spectrometry show that PFMS is a macromolecular composite polymer of ferric and magnesium based on -OH bonds. The coagulation performance of PFMS is better than those of PFS, PAC, and PFC. The coagulation mechanism of PFMS in treating actual textile wastewater is primarily driven by charge neutralization at low dosages and co-precipitation netting at high dosages.
Źródło:
Environment Protection Engineering; 2013, 39, 3; 57-71
0324-8828
Pojawia się w:
Environment Protection Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Flotation behavior of hard-to-separate and high-ash fine coal
Autorzy:
Xing, Y.
Gui, X.
Liu, J.
Cao, Y.
Zhang, Y.
Li, S.
Powiązania:
https://bibliotekanauki.pl/articles/110585.pdf
Data publikacji:
2016
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
flotation behavior
fine coal
Fuerstenau upgrading curve
energy input
selectivity
Opis:
The flotation behavior of hard-to-separate and high-ash fine coal was investigated using conventional flotation with constant power input. A new flotation process, based on energy input and distribution, was designed to lower the ash content of concentrate. The results obtained using Fourier transform infrared (FTIR) analysis show that the coal samples have good floatability because of many hydrophobic and few hydrophilic functional groups. Under a constant power input, a large number of ash-forming materials floated into a froth product at the start of flotation. Based on the Fuerstenau upgrading curves, it was determined that the 0.25-0.074 mm size fraction range showed the worst selectivity when compared with 0.50-0.25 mm and -0.074 mm size fractions. The desired concentrate with an ash content of 13.98%, 27.59% of ash recovery, and 80.01% combustible matter recovery could be obtained by transferring the excess energy of the flotation-conditioning stage to the pre-conditioning stage and increasing the power input step-by-step in the flotation-conditioning stage at equal total energy consumption.
Źródło:
Physicochemical Problems of Mineral Processing; 2016, 52, 2; 703-717
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Fiber-optic accelerometer based on a modal interferometer using a thin-core fiber
Autorzy:
Wang, X
Wu, X
Li, S
Ge, Q
He, T
Yu, B
Powiązania:
https://bibliotekanauki.pl/articles/174927.pdf
Data publikacji:
2015
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
fiber-optic accelerometer
modal interferometer
thin-core fiber
Opis:
A compact fiber-optic accelerometer based on a modal interferometer, which is fabricated by misaligned splicing of a short section of a thin-core fiber between two sections of a standard single-mode fiber, is demonstrated experimentally. A spectrum analysis method is used to detect an acceleration signal rapidly. The experimental results show that the thin-core fiber-based fiber-optic accelerometer has a minimum detectable acceleration of 3.3×10–3g (g – gravitational acceleration), and a wide frequency response range from 10 to 1200 Hz. Moreover, the proposed accelerometer exhibits the advantages of low cost, simple structure and easy fabrication.
Źródło:
Optica Applicata; 2015, 45, 3; 317-325
0078-5466
1899-7015
Pojawia się w:
Optica Applicata
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect of intergrown particle liberation on difficult-to-separate coking coal flotation
Autorzy:
Gui, X.
Liu, J.
Cao, Y.
Xing, Y.
Deng, Y.
Li, S.
Powiązania:
https://bibliotekanauki.pl/articles/109875.pdf
Data publikacji:
2016
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
liberation
particle size
coking coal
hydrophobicity
Opis:
Flotation tests with intergrown particle liberation were conducted to explore a separation method of difficult-to-separate coking coal from the Tangshan Kailuan mine in China. The particle size distribution, density and coal petrography were investigated. The difficult-to-separate coking coal sample resulted in intergrown particles, such as non-liberated coal and rocks. Thus, intergrown coal particle liberation and re-separation tests were conducted. The results showed that grinding time had a great effect on the flotation performance. Grinding prompted coal to dissociate and improve the surface hydrophobic properties of minerals. However, heterogeneous fine silt covered the surface of coal particles when coal was ground too long. The inorganic mineral particles were over-ground and reduced the contact angle of coal. The results of coal rock dissociation and laboratory re-separation tests showed that clean coal combustible recovery increased through intergrown particle liberation and re-separation.
Źródło:
Physicochemical Problems of Mineral Processing; 2016, 52, 1; 279-294
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Four stage hybrid constructed wetlands treating low-strength aquaculture wastewater with and without artificial aeration
Autorzy:
Zhang, S.-Y.
Li, G.
Li, X.
Tao, L.
Powiązania:
https://bibliotekanauki.pl/articles/207748.pdf
Data publikacji:
2015
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
wastewater treatment
aquaculture
water pollution
wetlands
aquaculture wastewater
artificial aeration
oczyszczanie ścieków
akwakultura
zanieczyszczenie wody
mokradła
sztuczne napowietrzanie
tereny podmokłe
Opis:
Driven by the booming demands for healthy food, aquaculture industry has to deal with the problem of water pollution appropriately so as to achieve sustainable development. In this study, a combination of four stage CWs (three horizontal subsurface flows followed by one free water surface flow) was configured to treat low-strength aquaculture wastewater. For performance assessment, the wetlands were monitored over three years, during which artificial aeration was added to them. By the results, the organic matters and nutrients were mainly sequestered in the anterior subsurface flows, while the surface flow mainly contributed to DO improvement. These results probably implied no necessity of excessive subsurface flows connected in a staged manner. In addition, the artificial aeration improved the treatment performance on ammonium-N, TN and TP in the first-stage CW.
Źródło:
Environment Protection Engineering; 2015, 41, 3; 31-42
0324-8828
Pojawia się w:
Environment Protection Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Process improvement and kinetic study on copper leaching from low-grade cuprite ores
Autorzy:
Bai, S.
Fu, X.
Li, C.
Wen, S.
Powiązania:
https://bibliotekanauki.pl/articles/109660.pdf
Data publikacji:
2018
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
cuprite
dissolution kinetics
sulfuric acid leaching
SCM
Opis:
Process improvement and kinetic study on copper leaching from low-grade cuprite ores in sulfuric acid solution are presented in this paper. Effects of major leaching parameters on copper leaching efficiency are determined. The results indicate that copper minerals in the raw ores are mainly cuprites. The reaction rate of this ore increases with an increase in temperature, reaction time, sulfuric acid concentrations and decrease in the particle size of ore. Leaching of about 92.5% of copper is achieved using 0.125-0.074 mm ore particle size at a reaction temperature of 353 K for 180 min reaction time with 150 g/dm3 sulfuric acid. The solid/liquid ratio was maintained constant at 1:15. Leaching kinetic indicates experimental data complies with shrinking core mode (SCM). It is found in the study that agitation rate is not an influential factor on leaching rate and that the dissolution rate is controlled by surface chemical reaction. The average activation energy of the process is determined to be 45.28 kJ mol-1, and the reaction order of H2SO4 is 0.8093.
Źródło:
Physicochemical Problems of Mineral Processing; 2018, 54, 2; 300-310
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A novel method to extract vanadium from high-grade vanadium slag: non-salt roasting and alkaline leaching
Autorzy:
Liu, B.
Meng, L.
Zheng, S.
Li, M.
Wang, S.
Powiązania:
https://bibliotekanauki.pl/articles/110480.pdf
Data publikacji:
2018
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
high-grade vanadium slag
cleaner production
non-salt roasting
alkaline leaching
mechanisms
Opis:
A new method using non-salt roasting-alkaline leaching to treat vanadium slag was proposed in this study. The V(III) in vanadium slag is oxidized to V(V) by roasting and the latter can be effectively leached out as vanadate by alkaline leaching. This method possesses distinct advantage of being able to treat high-grade vanadium slag. For the South Africa high-grade vanadium slag, the maximum vanadium recovery of 98% was achieved when the reaction conditions were roasting temperature of 850 °C, roasting time of 2 h, alkali concentration of 30 wt.%, leaching temperature of 210 °C, and leaching time of 2 h. The roasting and leaching mechanisms have been well elucidated based on the XRD and SEM analysis results. The phases transitions of vanadium slag were clearly presented. This work has laid the foundation for the industrial application of non-salt roasting-alkaline leaching and provided new insights into effective extraction of high-grade vanadium slag.
Źródło:
Physicochemical Problems of Mineral Processing; 2018, 54, 3; 657-667
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
An innovative methodology for recycling iron from magnetic preconcentrate of an iron ore tailing
Autorzy:
Yu, J.
Han, Y.
Gao, P.
Li, Y.
Yuan, S.
Li, W.
Powiązania:
https://bibliotekanauki.pl/articles/110888.pdf
Data publikacji:
2018
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
magnetic preconcentrate
iron ore tailing
iron recycling
fluidized magnetization roasting
magnetic separation
Opis:
Iron ore tailing is a kind of hazardous solid waste produced by iron and steel industry. In order to separate and recycle iron from the magnetic preconcentrate of an iron ore tailing, an innovative technological route of fluidized magnetization roasting followed by low-intensity magnetic separation was proposed in this paper. The effects of roasting temperature, dosages of reducing gas CO and fluidizing gas N2 on recovery rate of iron were carried out and optimized. The results showed that the hematite was almost reduced to magnetite by a gas mixture of 4 m3/h CO and 1 m3/h N2 at roasting temperature of 540 °C. Under the optimized conditions, a magnetic concentrate assaying 61.4 wt% Fe with a recovery rate of 81.8% was obtained from the magnetic preconcentrate of an iron ore tailing. The iron chemical phase, X-ray diffraction (XRD), and optical metallographic microscope analyses revealed that siderite was converted to magnetite successfully after roasting, and some coarse magnetite-hematite interlocking particles were formed due to insufficient reaction time, which could also be recovered by magnetic separation after liberating from gangue minerals.
Źródło:
Physicochemical Problems of Mineral Processing; 2018, 54, 3; 668-676
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Improved method for phase wraps reduction in profilometry
Autorzy:
Du, G.
Wang, M.
Zhou, C.
Si, S.
Li, H.
Lei, Z.
Li, Y.
Powiązania:
https://bibliotekanauki.pl/articles/173793.pdf
Data publikacji:
2017
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
phase unwrapping
zero-padding
Fourier transform
carrier-frequency
profilometry
Opis:
In order to completely eliminate, or greatly reduce the number of phase wraps in 2D wrapped phase map, Gdeisat and co-workers proposed an algorithm, which uses shifting the spectrum towards the origin. But the spectrum can be shifted only by an integer number, meaning that the phase wraps reduction is often not optimal. In addition, Gdeisat’s method will take much time to make the Fourier transform, inverse Fourier transform, select and shift the spectral components. In view of the above problems, we proposed an improved method for phase wraps elimination or reduction. First, the wrapped phase map is padded with zeros, the carrier frequency of the projected fringe is determined by high resolution, which can be used as the moving distance of the spectrum. And then realize frequency shift in spatial domain. So it not only can enable the spectrum to be shifted by a rational number when the carrier frequency is not an integer number, but also reduce the execution time. Finally, the experimental results demonstrated that the proposed method is feasible.
Źródło:
Optica Applicata; 2017, 47, 2; 295-306
0078-5466
1899-7015
Pojawia się w:
Optica Applicata
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies