Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "H.W." wg kryterium: Autor


Tytuł:
Multi-parameter measurement under fiber bending based on directional resonance coupling in photonic crystal fibers
Autorzy:
Tan, C.
Wang, Q.
Ding, Y.
Li, H.-W.
Wang, M.
Liu, H.
Powiązania:
https://bibliotekanauki.pl/articles/174320.pdf
Data publikacji:
2018
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
fiber bending
multi-parameter measurement
photonic crystal fiber
fiber sensing
Opis:
A multi-parameter sensor with enhanced sensitivity based on magnetic fluids infiltrated photonic crystal fiber is proposed. The sensing performances are investigated using the mode coupling theory and finite element method. Four symmetrical defective channels are assembled into the photonic crystal fiber to produce two resonant transmission dips λCV and λCH in vertical and horizontal directions, respectively. Each dip can be split into two relatively shallow dips (λCV1, λCV2 or λCH1, λCH2) when the photonic crystal fiber is bent. Interestingly, the values of (λCH2 – λCH1) and (λCV2 – λCV1) are associated with corresponding bend-curvature but almost unaffected by external temperature or magnetic field. On the contrary, the values of (λCH2 + λCH1)/2 and (λCV2 + λCV1)/2 are sensitive to temperature or magnetic field regardless of the bending condition. Based on above characteristics and the dependence of the magnetic fluids refractive index on temperature and magnetic field, the proposed sensor can measure not only the bend-curvature and bend-direction, but also the temperature and magnetic field.
Źródło:
Optica Applicata; 2018, 48, 3; 449-462
0078-5466
1899-7015
Pojawia się w:
Optica Applicata
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Ruin probability of a discrete-time risk process with proportional reinsurance and investment for exponential and Pareto distributions
Autorzy:
Jasiulewicz, H.
Kordecki, W.
Powiązania:
https://bibliotekanauki.pl/articles/406409.pdf
Data publikacji:
2015
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
discrete time risk process
ruin probability
proportional reinsurance
Lundberg’s inequality
regularly varying tail
Opis:
The paper focuses on a quantitative analysis of the probability of ruin in a finite time for a discrete risk process with proportional reinsurance and investment of the financial surplus. It is assumed that the total loss on a unit interval has either a light-tailed distribution – exponential distribution or a heavytailed distribution – Pareto distribution. The ruin probabilities for the finite-horizons 5 and 10 were determined from recurrence equations. Moreover, the upper bound of the ruin probability is given for the exponential distribution based on the Lundberg adjustment coefficient. This adjustment coefficient does not exist for the Pareto distribution, hence an asymptotic approximation is given for the ruin probability when the initial capital tends to infinity. The numerical results obtained are illustrated by tables and figures.
Źródło:
Operations Research and Decisions; 2015, 25, 3; 17-38
2081-8858
2391-6060
Pojawia się w:
Operations Research and Decisions
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Degradation mechanism study of amine collectors in Fenton process by quantitative structure-activity relationship analysis
Autorzy:
Wang, X.
Liu, W.
Duan, H.
Powiązania:
https://bibliotekanauki.pl/articles/110363.pdf
Data publikacji:
2018
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
amine collectors
Fenton process
QSAR
degradation mechanism
quantum chemistry
Opis:
In this study, advanced oxidation processes (AOPs), Fenton process, was applied to degrade ten amine collectors. The experimental results indicated that most of the tested amines could be removed rapidly and effectively at pH=4, while the degradation of quaternary ammonium compounds was less than others. To research the Fenton oxidation process, the degradation-rate constants of amine collectors were calculated by the pseudo-second order kinetic model, then which was used as the dependent variable to establish a quantitative structure activity relationship (QSAR) model. Meanwhile, 16 molecular structure descriptors and quantum mechanical parameters for amine collectors were simulated and analyzed by using Materials Studio software. The optimum QSAR model was established based on the partial least squares regression (PLS) method and confirmed by the statistics analysis. The model revealed that hydrogen bond acceptor (HBA) and the maximum values of electrophilic attack in C atom sites (f(-)c) were the major effect factors for the degradation-rate constants of amine collector.
Źródło:
Physicochemical Problems of Mineral Processing; 2018, 54, 3; 713-721
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effects of cotton on several enzymatic activities of the petroleum contaminated soil. A laboratory experiment
Autorzy:
Jingyan, L.
Jianxiong, W.
Ying, H.
Xianyong, J.
Powiązania:
https://bibliotekanauki.pl/articles/208048.pdf
Data publikacji:
2013
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
cotton
remediation
soil pollution
alkaline phosphatase
degradation of pollutants
enzymatic activities
petroleum-contaminated soil
petroleum-polluted soils
bawełna
rekultywacja
zanieczyszczenie gleby
fosfataza alkaliczna
degradacja zanieczyszczeń
aktywność enzymatyczna
gleba zanieczyszczona ropą naftową
Opis:
A laboratory experiment lasting for 90 days was conducted to examine the interaction between a remediation plant, Gossypium hirsutum, and the petroleum contaminated soil. Root indices and 9 various types of soil enzymatic activities in two separate groups were determined. Results showed that compared to the uncontaminated control, the growth of cotton roots was slightly strengthened at the pollution level of 1000 mg-kg-1, while seriously inhibited at the pollution level of 2000 mg-kg-1 and 4000 mg-kg-1. At the same pollution level, all studied soil enzymatic activities except alkaline phosphatase were markedly higher in the group with plants than in the group without plants which may indicate that the content of nutrients essential for plant growth as well as the activities of microorganisms capable of degrading contaminants were both enhanced in soils planted with cotton, therefore conducive to the increase of the overall fertility level and the degradation of pollutants in the petroleum contaminated soil.
Źródło:
Environment Protection Engineering; 2013, 39, 1; 163-182
0324-8828
Pojawia się w:
Environment Protection Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Selective reduction of PbSO4 to PbS with carbon and flotation treatment of synthetic galena
Autorzy:
Zheng, Y.-X.
Liu, W.
Qin, W.-Q.
Han, J.-W.
Yang, K.
Luo, H.-L.
Powiązania:
https://bibliotekanauki.pl/articles/110717.pdf
Data publikacji:
2015
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
wastes
lead sulfate
reduction
carbon
lead sulfide
flotation
Opis:
In order to recover lead from the zinc leaching residues, a new technology involving selective reduction of lead sulfate to lead sulfide with carbon followed by flotation was investigated. The reduction thermodynamics of PbSO4 was discussed and the effects of molar ratio of C to PbSO4, reaction temperature and time were examined by thermogravimetry (TG) and XRD. Verification tests were further carried out to prove the conclusions of thermodynamic and TG analyses, and the transformation extent could reach 86.45% under the optimal roasting conditions. The prepared galena was then subjected to micro-flotation tests, and the highest lead recovery could reach up to 75.32%.
Źródło:
Physicochemical Problems of Mineral Processing; 2015, 51, 2; 535-546
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Plantar pressure analysis of above-knee amputee with a developed microprocessor-controlled prosthetic knee
Autorzy:
Cao, W.
Yu, H.
Meng, Q.
Li, S.
Powiązania:
https://bibliotekanauki.pl/articles/306983.pdf
Data publikacji:
2018
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
ciśnienie podeszwowe
proteza stawu kolanowego
analiza chodu
plantar pressure
above-knee amputee
microprocessor-controlled
prosthetic knee
gait analysis
Opis:
Human gait motion analysis was one useful method for lower limb prosthesis study. The most often measured parameters were plantar pressure, kinetic and kinematic parameters. It was indispensable for prosthetic knee design and performance assessment. The aim of this study was to analysis the plantar pressure in traumatic above-knee amputee equipped with a developed microprocessor-controlled prosthetic knee. Methods: The maximum force of forefoot and rearfoot, the average vertical reaction force and pressure and the centre of pressure (COP) offset trajectories of ten above-knee amputees under different walking speeds were obtained. Results: Both forefoot and rearfoot force were bigger in intact leg than prosthetic leg. As the speed increased, the pressure increased in both sides. Forefoot bore more pressure than rearfoot in both legs. The average vertical pressure and force both increased along with the increase of speed. The force and pressure of intact side were always bigger than the prosthetic side. The trend of COP and gait line of the prosthetic and intact side had no significant difference. The length of the gait line of prosthetic side was greater than the intact side. Conclusions: The results of this study exhibited reduced plantar pressure in the prosthetic side. The typical butterfly diagrams were produced during different walking speeds. It indicated that the stability of the microprocessor-controlled prosthetic knee could be guaranteed.
Źródło:
Acta of Bioengineering and Biomechanics; 2018, 20, 4; 33-40
1509-409X
2450-6303
Pojawia się w:
Acta of Bioengineering and Biomechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Adsorptive performance of MCM-41 towards hg(II) in water. Adsorption and desorption studies
Autorzy:
Zhai, Q. Z.
Hu, W.-H.
Guo, X.-Y.
Powiązania:
https://bibliotekanauki.pl/articles/208154.pdf
Data publikacji:
2016
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
electron microscopy
mesoporous silicates
cetyltrimethylammonium bromide
adsorption conditions
mikroskopia elektronowa
krzemiany mezoporowate
bromek cetyltrimethylammonium
warunki adsorpcyjne
Opis:
MCM-41 mesoporous material was prepared under a standard conditions by using cetyltrime-thylammonium bromide as a structure-directing agent and tetraethyl orthosilicate as silica source from the liquid phase at 80 °C. Powder X-ray diffraction and scanning electron microscopy used to characterize the product, showed that the MCM-41material had an average particle size of 110 nm. The synthesized material was used to investigate the effects of acidity, adsorption time, the concentration of Hg2+, adsorbent dosage and temperature on the adsorption of Hg2+. The results showed that the optimal adsorptive conditions were: pH 5.0, m(MCM-41):mHg2+ 6.67, temperature 20 °C and contact adsorption time 60 min, for the initial Hg2+concentration of 1.0 mg/cm3. The maximum adsorptive amount of Hg2+ was 56.48 mg Hg2+/g MCM-41. The results of the desorptive effect of three desorption agents such as HCl, HNO3 and HAc showed that the best desorbent was HCl at the concentration of 0.10 mol/dm3. The highest desorption efficiency was 77.21% for the desorption time 2 h.
Źródło:
Environment Protection Engineering; 2016, 42, 1; 5-15
0324-8828
Pojawia się w:
Environment Protection Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Use of nanofiltration membranes to concentrate and recover leached aluminum from acidified water treatment sludge
Autorzy:
Cheng, W. P.
Chen, P. H.
Tian, D. R.
Yu, R. F.
Fu, C. H.
Powiązania:
https://bibliotekanauki.pl/articles/208030.pdf
Data publikacji:
2016
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
water purification
nanofiltration
acidic solutions
leaching
roztwory kwaśne
oczyszczanie wody
nanofiltracja
ługowanie
glin
Opis:
The recovery of aluminum from water purification sludge is usually performed by making the solution acidic or basic. However, for economic reasons and reasons of safety, excessive doses of acid or base should not be utilized. Accordingly, the aluminum concentration in the leached solution is typically limited, thus the recovered aluminum cannot be directly reused as a coagulant. A nanofiltration (NF) membrane can be used in the acidic solution to concentrate high-valence metal ions. There-fore, in this work, H2SO4 was utilized to leach Al3+ ions from water purification sludge. Then, the Al3+ ion solution was concentrated using a low-price NF membrane. The effect of natural organic matter on the Al3+ ion concentrating efficiency in the filtration process has been elucidated. Experimental results reveal that Al3+ ions were effectively prevented from passing through the NF membrane, enabling a highly concentrated aluminum solution to be obtained. However, the presence of organic compounds may reduce the efficiency of the concentration of Al3+ ions in the solution.
Źródło:
Environment Protection Engineering; 2016, 42, 3; 19-32
0324-8828
Pojawia się w:
Environment Protection Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Three-port beam splitter based on a sandwiched grating with an improved aspect ratio
Autorzy:
Shu, W
Wang, B
Li, H
Li, W
Chen, L.
Lei, L.
Zhou, J.
Powiązania:
https://bibliotekanauki.pl/articles/174445.pdf
Data publikacji:
2015
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
aspect ratio
sandwiched grating
three-port beam splitter
Opis:
In this paper, a fused-silica transmission grating used as a three-port beam splitter is designed by using the rigorous coupled-wave analysis, which is based on the sandwiched grating structure at the wavelength of 800 nm under normal incidence. Firstly, it is feasible to realize such a grating with the prescribed grating duty cycle and grating period. Next, high efficiency can be also achieved for both TE and TM polarizations. Moreover, the aspect ratio of the grating depth to the ridge width can be improved, which is significant for practical applications. At last, the three-port beam splitter is designed with a covering layer on the surface, which can extend its life service.
Źródło:
Optica Applicata; 2015, 45, 3; 279-284
0078-5466
1899-7015
Pojawia się w:
Optica Applicata
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Drilling resistance : A method to investigate bone quality
Autorzy:
Lughmani, W. A.
Farukh, F.
Bouazza-Marouf, K.
Ali, H.
Powiązania:
https://bibliotekanauki.pl/articles/306405.pdf
Data publikacji:
2017
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
chirurgia ortopedyczna
wiercenie
gęstość mineralna kości
jakość kości
bone drilling
orthopaedic surgery
screw pull-out strength
bone mineral density
bone quality
Opis:
Purpose: Bone drilling is a major part of orthopaedic surgery performed during the internal fixation of fractured bones. At present, information related to drilling force, drilling torque, rate of drill-bit penetration and drill-bit rotational speed is not available to orthopaedic surgeons, clinicians and researchers as bone drilling is performed manually. Methods: This study demonstrates that bone drilling force data if recorded in-vivo, during the repair of bone fractures, can provide information about the quality of the bone. To understand the variability and anisotropic behaviour of cortical bone tissue, specimens cut from three anatomic positions of pig and bovine were investigated at the same drilling speed and feed rate. Results: The experimental results showed that the drilling force does not only vary from one animal bone to another, but also vary within the same bone due to its changing microstructure. Drilling force does not give a direct indication of bone quality; therefore it has been correlated with screw pull-out force to provide a realistic estimation of the bone quality. A significantly high value of correlation (r 2 = 0.93 for pig bones and r 2 = 0.88 for bovine bones) between maximum drilling force and normalised screw pull-out strength was found. Conclusions: The results show that drilling data can be used to indicate bone quality during orthopaedic surgery.
Źródło:
Acta of Bioengineering and Biomechanics; 2017, 19, 1; 55-62
1509-409X
2450-6303
Pojawia się w:
Acta of Bioengineering and Biomechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Study on recovery of lead, zinc, iron from jarosite residues and simultaneous sulfur fixation by direct reduction
Autorzy:
Wang, Y.
Yang, H.
Zhang, W.
Song, R.
Jiang, B.
Powiązania:
https://bibliotekanauki.pl/articles/110933.pdf
Data publikacji:
2018
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
jarosite
direct reduction
recovery
valuable metal
sulfur fixation
Opis:
Jarosite residues, which are generated in a zinc production plant by a hydrometallurgical process, contain a large amount of valuable metal components. In this study, a method was proposed for the recovery of lead, zinc and iron from the residues and simultaneous sulfur fixation through direct reduction followed by magnetic separation. The influences of the roasting temperature, roasting time and the concentration of SO2 gas in the direct reduction process were researched in detail. Results showed that the volatilization rates of lead, zinc and sulfur were 96.97%, 99.89% and 1.09%, respectively, and the iron metallization rate was 91.97% under optimal reduction conditions; roasting temperature 1523 K for 60 min. The magnetic concentrate with the iron content of 90.59% and recovery rate of 50.87% was obtained from the optimal reduction product by grinding and magnetic separation. The optimum fineness for separation 96.56% less than 37 μm accounted with magnetic field strength 24 kA/m. The theoretical analysis was carried out by thermodynamics, X-ray powder diffraction, gas analysis and scanning electron microscopy.
Źródło:
Physicochemical Problems of Mineral Processing; 2018, 54, 2; 517-526
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Demarcation energy properties of regenerated fiber Bragg grating sensors in few-mode fibers
Autorzy:
Mohd Nazal, N. A.
Lai, M.-H.
Lim, K.-S.
Gunawardena, D. S.
Chong, W.-Y.
Yang, H.-Z.
Ahmad, H.
Powiązania:
https://bibliotekanauki.pl/articles/174756.pdf
Data publikacji:
2018
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
regenerated fiber Bragg grating
thermal regeneration
thermal decay
few-mode fibers
Opis:
In this work, thermal regeneration of fiber Bragg gratings inscribed in single-mode fibers, two-mode step index fibers and four-mode step index fibers is performed, where the single-mode fibers are used as the reference in the analysis. Specifically, we investigate the behavior of the thermal decay, recovery and eventually the permanent erasure of the gratings in the temperature range from 25 to 1300°C. In the domain of demarcation energy, the thermal responses of the gratings can be normalized and they share similar characteristic curves despite the different temperature ramping rates used in the annealing treatment. It is found that the demarcation energy at the regeneration point and the attempt-to-escape frequency for each grating can be associated with the confinement factors of the fibers. The finding in this work has provided a new insight in the manufacture of regenerated fiber Bragg grating sensors by using few-mode fibers for multiparameter sensing in high temperature environments.
Źródło:
Optica Applicata; 2018, 48, 2; 263-271
0078-5466
1899-7015
Pojawia się w:
Optica Applicata
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Ag+/S2O8 2– system for the degradation of aqueous flutriafol
Autorzy:
Yang, H.
Zhou, W.
Yang, L.
Deng, J.
Hu, Q.
Wei, H.
Au, C.
Yi, B.
Powiązania:
https://bibliotekanauki.pl/articles/207760.pdf
Data publikacji:
2018
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
chemical analysis
degradation
free radicals
metal ions
molecular orbital
transition metals
analiza chemiczna
degradacja
wolne rodniki
jony metali
orbital molekularny
metale przejściowe
Opis:
The degradation of flutriafol in aqueous persulfate (S2O82–) system in the presence of selected transition metal ions was investigated. In the presence of Ag+ or Fe2+, flutriafol degradation occurs, whereas in the presence of Mn2+, Co2+, Ni2+, Cu2+, Zn2+ and Bi3+ ions, the degradation is less than 15%. The Ag+/ S2O82– aqueous system being the most effective was adopted for experimental and theoretical investigations. It was confirmed that pH of 3.0 is the most suitable, and that both · SO4and ·OH– radicals are the main active species to afford flutriafol degradation, with the former contributes more than the latter. To elucidate degradation mechanism, molecular orbital calculations were performed and reaction intermediates identified by GC/MS and HPLC/MS/MS analyses. Three degradation pathways are proposed that involve the cleavage of C–N and C–C bonds as a result of ·SO4 attack, as well as the formation of hydroxylated products due to · OH radicals.
Źródło:
Environment Protection Engineering; 2018, 44, 2; 57-72
0324-8828
Pojawia się w:
Environment Protection Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Polarization-independent metal-dielectric grating with improved bandwidth
Autorzy:
Wang, B
Li, H
Shu, W
Li, W
Li, C
Lei, L
Zhou, J
Powiązania:
https://bibliotekanauki.pl/articles/174684.pdf
Data publikacji:
2015
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
rigorous coupled-wave analysis
reflective efficiency
improved bandwidth
Opis:
A polarization-independent reflective grating with improved bandwidth is presented based on the mixed metal-dielectric grating. The novel grating is composed of the substrate, the metal slab, two dielectric layers, and the covering layer. The grating parameters are optimized for the special duty cycle of 0.6 at an incident wavelength of 1550 nm used in dense wavelength division multiplexing (DWDM). With the designed grating, high efficiency can be diffracted into the reflective –1st order for both TE and TM polarizations, where the polarization-independence is exhibited. Most importantly, the efficiency of more than 90% can be achieved within the incident wavelength bandwidth of 1262–1686 nm, where the bandwidth is improved greatly compared with the reported surface-relief single-layer grating. The reflective grating can have advantages of high efficiency, polarization-independence, and wide bandwidth, which should be useful for DWDM applications.
Źródło:
Optica Applicata; 2015, 45, 1; 71-77
0078-5466
1899-7015
Pojawia się w:
Optica Applicata
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Assessing soil environmental capacity on different land uses in a suburban area of Chengdu, China
Autorzy:
Yang, W.-L.
Zhou, W.-Y.
Wan, W.-X.
Gou, S.-Z.
Zhang, J.
Deng, S.-H.
Shen, F.
Wang, Y.-J.
Yang, H.
Luo, L.
Powiązania:
https://bibliotekanauki.pl/articles/207670.pdf
Data publikacji:
2019
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
China
soil pollution
heavy metals
soil
vegetables
Chiny
zanieczyszczenie gleby
metale ciężkie
gleba
warzywa
Opis:
Wenjiang (China) is the area which undertakes high-intensity planting activities. Additionally, the soil environmental capacity has been a hot area of research as it plays a key role in environmental protection planning, environmental impact assessment and sustainable development. In this paper, the static model of soil environmental capacity is employed to investigate the distribution of residual soil environmental capacity in Wenjiang. The results show that the soil environmental capacity of mercury is the largest for industrial land while it is the lowest in garlic-rice planting areas; the soil environmental capacity of arsenic is the largest in city construction land while it is the lowest in ecological conservation zone; the soil environmental capacity of lead is the largest in city construction land while it is the lowest in garlic-rice planting areas; and the soil environmental capacity of chromium is the largest in city construction land while it is the lowest in garlic-rice planting areas.
Źródło:
Environment Protection Engineering; 2019, 45, 2; 55-67
0324-8828
Pojawia się w:
Environment Protection Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies