Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Ahmed, S." wg kryterium: Autor


Wyświetlanie 1-3 z 3
Tytuł:
Microarray-core based circular photonic crystal fiber for high chemical sensing capacity with low confinement loss
Autorzy:
Asaduzzaman, S.
Ahmed, K.
Powiązania:
https://bibliotekanauki.pl/articles/174575.pdf
Data publikacji:
2017
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
circular photonic crystal fiber
confinement loss
elliptical core
chemical sensor
relative sensitivity
Opis:
In this article, a circular photonic crystal fiber based chemical sensor has been presented where core region is designed with an array of elliptical holes. The proposed structure is numerically investigated by using a full vectorial finite element method. From the numerical results, it is observed that introducing an array of elliptical holes helps to obtain the high relative sensitivity and realizes a low confinement loss. In addition, the increase in the value of the diameter of holes in the innermost ring enhances the relative sensitivity. Moreover, the increase in the value of the diameter of holes in the outermost ring reduces the confinement loss. In this work, we have considered an industrially valuable chemical ethanol. Simulation results disclose that the highest relative sensitivity of proposed photonic crystal fiber is 29.25% for ethanol and the confinement loss is 7.68 × 10–7 dB/m at the wavelength 1.5 µm.
Źródło:
Optica Applicata; 2017, 47, 1; 41-49
0078-5466
1899-7015
Pojawia się w:
Optica Applicata
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Celestite upgrading by jigs in presence of steel balls as ragging material
Autorzy:
Sobhy, Ahmed
El-Midany, Ayman A.
Ibrahim, Susan S.
Powiązania:
https://bibliotekanauki.pl/articles/1447020.pdf
Data publikacji:
2021
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
celestite
calcite
jigging
ragging material
gravity separation
statistical analysis
Opis:
Gravity separation using jigs is widely used for coarse particle sizes separation. However, fine sizes reduce jig performance. In this study, the upgrading of celestite ore by jig was investigated at different size fractions in the presence of ragging material. Three size fractions, i.e., -15+2 mm, - 2.0 + 0.50 mm and - 0.50 + 0.08 mm were used. The steel balls were used, as ragging material, to improve the separation of fines as well as to improve the concentrate quality. The statistical design was used to correlate celestite grade and recovery with studied operating variables, i.e., the ragging number of layers, ragging balls diameter, and separation time, at a fixed water flow rate and stroke length. The design results indicated that the ragging balls diameter and their number of layers play an important role. The smaller the ragging balls diameter and the higher the ragging number of layers are the better the concentrate grade but the longer the separation time. A celestite concentrate of (> 95% SrSO4) with 74.5% recovery was obtained for - 2.0 + 0.50 mm size fraction at the optimum conditions; i.e., 3.1 mm ragging balls diameter, one ragging layers, and 15 minutes separation time.
Źródło:
Physicochemical Problems of Mineral Processing; 2021, 57, 5; 118-128
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Flotation after a direct contact of flotation reagents with carbonate particles. Part 1, Model investigations
Autorzy:
Ahmed, H. A. M.
Aljuhani, M. S.
Drzymala, J.
Powiązania:
https://bibliotekanauki.pl/articles/109753.pdf
Data publikacji:
2013
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
phosphates
flotation
microemulsion
separation Introduction
Opis:
Carbonate fluorapatite (francolite), calcite and dolomite separately, as well as their model mixtures, were subjected to flotation after conditioning the particles with microemulsion consisting of 20% of Custafloat AR27 (collector, blend of fatty acid soaps and sulfates), 55% fuel oil #5 and 25% water at 70% solids density and subsequent pulp dilution with water to 25% solids. The best separation of carbonate fluorapatite from calcite and dolomite occurred at pH 8.5 and microemulsion dose between 0.9 and 1.5 kg/Mg, 1.5 min conditioning time and 2 minutes of flotation time. The obtained flotation concentrates using 1.5 kg/Mg of collector contained 84% carbonate fluorapatite (34% P2O5) with 84% recovery. The 84/84 separation efficiency in terms of grade-recovery indices points to promising results which can be obtained for real phosphate ores.
Źródło:
Physicochemical Problems of Mineral Processing; 2013, 49, 2; 713-723
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-3 z 3

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies