Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Wang, Wei" wg kryterium: Wszystkie pola


Wyświetlanie 1-13 z 13
Tytuł:
Fault Diagnosis of Sensors for T-type Three-Level Inverter-fed Dual Three-Phase Permanent Magnet Synchronous Motor Drives
Autorzy:
Wang, Xueqing
Wang, Zheng
Wang, Wei
Cheng, Ming
Powiązania:
https://bibliotekanauki.pl/articles/1193713.pdf
Data publikacji:
2019
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
fault diagnosis
sensor fault
T-type inverter
three-level inverter
dual
three-phase
PMSM
Opis:
To improve the reliability of motor system, this paper investigates the sensor fault diagnosis methods for T-type inverter-fed dual three-phase permanent magnet synchronous motor (PMSM) drives. Generally, a T-type three-level inverter-fed dual three-phase motor drive utilizes four phase-current sensors, two direct current (DC)-link voltage sensors and one speed sensor. A series of diagnostic methods have been comprehensively proposed for the three types of sensor faults. Both the sudden error change and gradual error change of sensor faults are considered. Firstly, the diagnosis of speed sensor fault was achieved by monitoring the error between the rotating speed of stator flux and the value from speed sensor. Secondly, the large high-frequency voltage ripple of voltage difference between the estimated voltage and the reference voltage was used to identify the voltage sensor faults, and the faulty voltage sensor was determined according to the deviation of voltage difference. Thirdly, the abnormal current amplitude on harmonic subspace was adopted to identify the current sensor faults, and the faulty current sensor was located by distinguishing the current trajectory on harmonic subspace. The experiments have been taken on a laboratory prototype to verify the effectiveness of the proposed fault diagnosis schemes.
Źródło:
Power Electronics and Drives; 2019, 4, 39; 165-176
2451-0262
2543-4292
Pojawia się w:
Power Electronics and Drives
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Eliminating the adverse effect of the lime on the gold-bearing pyrrhotite flotation using the isopentyl xanthate as collector at low alkalinity
Autorzy:
Yang, Wei
Wang, Qian
Wang, Yaping
Dong, Ping
Powiązania:
https://bibliotekanauki.pl/articles/110148.pdf
Data publikacji:
2019
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
pyrrhotite
flotation
pH regulator
collector
Opis:
Flotation optimal conditions and mechanism of regulator lime, isopentyl xanthate and butyl xanthate on pyrrhotite were investigated by flotation test, contact angle, zeta potential and infrared spectroscopic analysis. It is found that there is a certain relationship between the regulator lime and the collector isopentyl xanthate. The results of flotation indicate that lime can indeed inhibit pyrrhotite, and isopentyl xanthate can decrease the depression effect of lime on pyrrhotite in low alkalinity. The results of adsorption mechanism of lime and isopentyl xanthate show that after lime adsorbed on the pyrrhotite surface, Ca 2+inhibit the adsorption of collector with the form of Ca(OH) 2 precipitates. Compared with butyl xanthate, isopentyl xanthate could reduce the generation of hydrophilic Ca(OH) 2 and generate less hydrophilic CaCO3 as well to decrease the negative effect of gold-bearing pyrrhotite flotation depressed by lime.
Źródło:
Physicochemical Problems of Mineral Processing; 2019, 55, 5; 1250-1258
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Enhanced effect of fine magnetite on the flotation performance of fine hematite in sodium oleate system
Autorzy:
Pei, Bin
Luo, Ximei
Yang, Wen
Wei, Dayong
Li, Chao
Wang, Yunfan
Powiązania:
https://bibliotekanauki.pl/articles/2146908.pdf
Data publikacji:
2022
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
magnetite
hematite
flotation
magnetic aggregation
Opis:
In this work, the effect of magnetite with different particle sizes on the flotation performance of both coarse and fine hematite particles were investigated by using sodium oleate as a collector. The results showed that the magnetite particles with different particle sizes showed a negative effect on hematite (-106+45 μm) recovery, but the addition of magnetite with the same particle sizes as hematite during the direct flotation of -45 μm hematite was beneficial to improve the recovery of micro-fine hematite and the Fe grade of concentrate. The finer the magnetite particle was, the more obvious the agglomeration effect of hematite was. Therefore, the beneficial effect could be achieved by adjusting the particle sizes of particles. Moreover, sodium oleate was beneficial to promote the agglomeration of micro-fine magnetite and hematite. The results from the microscopic analysis, laser particle size analysis, and EDLVO calculation proved that there was an effective aggregation between fine magnetite and fine hematite particles, which increased the apparent size of hematite particles and the probability of the mineral particles adhering to bubbles, thus improving the hematite recovery.
Źródło:
Physicochemical Problems of Mineral Processing; 2022, 58, 4; art. no. 149673
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect and mechanism of depressant CK102 on flotation separation of fluorite and dolomite
Autorzy:
Li, Zhengyao
Wang, Xuewen
Xu, Chengyan
Sun, Tichang
Liu, Weiran
Wei, Jinzhi
Powiązania:
https://bibliotekanauki.pl/articles/2146904.pdf
Data publikacji:
2022
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
fluorite
dolomite
flotation
depressant CK102
adsorption
Opis:
For a low grade dolomite type fluorite ore in the Hebei province, it was observed that the depressant CK102, a mixture of sulfuric acid, sodium silicate and aluminum sulfate, can effectively inhibit the gangue mineral dolomite in the flotation of fluorite. However, the inhibition mechanism of the depressant is still unclear. In this paper, the flotation separation performance and underlying mechanism of CK102 inhibiting dolomite were investigated through mineral flotation tests, adsorption measurements, infrared spectroscopy, and X-ray photoelectron spectroscopy (XPS). The flotation results showed that the inhibition effect of CK102 on dolomite flotation was much more remarkable than that of fluorite flotation under optimum conditions. Adsorption measurements revealed that there was competitive adsorption between the depressant and collector and that the adsorption of the depressant CK102 prevented the collector modified sodium oleate from adsorbing onto the surface of minerals. The FT-IR and XPS results showed that the co-oxygen cross-linked component of the depressant CK102 chemisorbed on the surface of dolomite; the CaSiO3 precipitation was generated from the reaction of CK102 with Ca2+ groups on the surface of the dolomite; Al2MgO8Si2 precipitation was also generated from Mg2+ reacting with the sodium silicate and aluminum sulfate of CK102. The above adsorptions and reactions enhanced the hydrophilicity of the dolomite surface and the dolomite was effectively depressed.
Źródło:
Physicochemical Problems of Mineral Processing; 2022, 58, 3; art. no. 145796
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Study on the mechanism of the difference in flotation performance between fine-grained crystalline SiO2 and amorphous SiO2
Autorzy:
Ma, Saisai
Li, Jie
Wang, Yonglun
Wei, Bangqi
Powiązania:
https://bibliotekanauki.pl/articles/27323646.pdf
Data publikacji:
2023
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
flotation separation
heteromorphism
infrared spectrum calculation
DLVO theory
Opis:
Numerous minerals found in nature contain silica, including quartz, cristobalite, opal, etc. They have the same chemical composition but different crystal structures, and this phenomenon is called “polymorphism” in mineralogy. For these polymorphic and multi-like minerals, in the flotation process, will it directly or indirectly affect the flotation effect. Based on this, this study mainly explores the difference between crystalline SiO2 and amorphous SiO2 in flotation. In this study, two crystal forms of SiO2 were subjected to flotation and adsorption capacity tests. FTIR, other test techniques, the chemical calculation of the flotation solution, and the theoretical calculation of the DLVO can all be used to provide an explanation. Finally, in the flotation experiment, the feedbacks of the two minerals to the change of the pH value of the pulp and the change of the concentration of the reagent are different. Through the comprehensive analysis of the adsorption capacity test and semi-quantitative calculation of the infrared spectrum, the adsorption capacity of crystalline SiO2 to drugs is about 23% higher than amorphous SiO2. Furthermore, during the flotation process, the amorphous SiO2 particles will agglomerate together and entrain into the foam through, resulting in concentrate pollution. So amorphous SiO2 will undoubtedly increase the difficulty of flotation.
Źródło:
Physicochemical Problems of Mineral Processing; 2023, 59, 6; art. no. 174567
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Biomechanical evaluation of tendon connection with novel suture techniques
Autorzy:
Chen, Z.
Wang, J.
Wei, J.- S.
Hou, Z.-Y.
Li, M.
Chen, Q.-X
Powiązania:
https://bibliotekanauki.pl/articles/306902.pdf
Data publikacji:
2018
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
ścięgno Achillesa
IFLL
biomechanika
internal fixation with limited loop
Achilles tendon
biomechanics
Opis:
Achilles tendon rupture is a severe injury with poor curative effect due to its anatomical characteristic and mechanical peculiarity. Internal fixation of limited loop (IFLL) with steel-wire has been applied on patients with tendon rupture to fix the broken ends before physical rehabilitation. The purpose of this study is to investigate the biomechanical property and radiological characteristic of such suture technique for the repairment of tendon rupture. Methods: Tendons of pigs’ hint feet were separated for the biomechanical study. Suture surgery was performed according to the protocol of IFLL. Biomechanical Testing Machine was adopted to conduct the biomechanical tensile load examination. The maximal load, elastic modulus and tendon stiffness of the stitched tendons with or without reinforcement were examined. Results: The maximum tensile load of the stitched tendons using IFLL reached 1/4 of the uninjured tendon’s maximum tensile load, indicating that such suture technique is capable of providing enough tension for the ruptured tendon. Surprisingly, tendons fixed with titanium wire showed the highest load tension, which was comparable to the undamaged tendon. Therefore, we found the biomechanical basis of using IFLL in effectively connecting the rupture ends of tendons. Conclusions: In conclusion, we provide biomechanical evidence for the use of IFLL in treatment of Achilles tendon rupture, by providing enough strength for the ankle function. Such suture technique could help the patients with better rehabilitation and reduced in-hospital stay after Achilles tendon injury.
Źródło:
Acta of Bioengineering and Biomechanics; 2018, 20, 1; 135-141
1509-409X
2450-6303
Pojawia się w:
Acta of Bioengineering and Biomechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A novel process for extraction of iron from a refractory red mud
Autorzy:
Ding, Wei
Xiao, Junhui
Peng, Yang
Shen, Siyue
Chen, Tao
Zou, Kai
Wang, Zhen
Powiązania:
https://bibliotekanauki.pl/articles/1450194.pdf
Data publikacji:
2020
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
red mud
sodium sulfate
segregation roasting
magnetic separation
iron recovery
Opis:
Red mud is a kind of solid waste produced during alumina extraction from bauxite. To extraction valuable iron from red mud, the technology of adding sodium sulfate-segregation roasting-magnetic separation to treat red mud was developed. During the paper, the effects of various process parameters on the extraction of iron by segregation roasting-magnetic separation were studied, and the phase transformation behavior and microstructure of iron are explored. Repeated test results showed that magnetic concentrate (mass percent), TFe of 80.29 % and overall iron recovery of 92.08 %was obtained. The X-ray diffraction (XRD) and scanning electron microscopy (SEM) results indicated that after the segregation roasting, the hematite was transformed into a new metal phase consisting mainly of metallic iron and magnetite. The addition of sodium sulfate during the segregation roasting can obviously improve the efficiency of segregation roasting-magnetic separation for iron extraction.
Źródło:
Physicochemical Problems of Mineral Processing; 2020, 56, 6; 125-136
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Tubular biofilter treatment of isobutanol emissions under various organic loading rates
Autorzy:
Chen, Hong
Peng, Liang
Wei, Yanxiao
Yu, Lie
Jiang, Bo
Wang, Hong
Yu, Guanlong
Zhang, Guijin
Powiązania:
https://bibliotekanauki.pl/articles/207774.pdf
Data publikacji:
2020
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
biofiltration
pollutants removal
volatile compounds
biofiltracja
usuwanie zanieczyszczeń
związki lotne
Opis:
Isobutanol in waste gas streams was treated by a tubular biofilter (TBF) which continuously operated for 364 days under various organic loading rate (OLR) from 11 g·m–3·h–1 to 66 g·m–3·h–1. Results show that within 60 days, the TBF successfully started up even after changing the OLR from 31.3 to 15.6 g·m–3·h–1. The average removal efficiencies (REs) were totally higher than 90% when OLRs ranged from 12.14 to 66.45 g·m–3·h–1. Two distinct performance deterioration periods were observed at days 186–253 and days 280–334, both of which recovered without additional measurement. During these periods, the larvae and adult moth flies, been identified as Psychodinae infested the TBF, greatly affected the TBF performance. When the number of adult Psychodinae decreased, TBF performance recovered. The elimination capacity (EC) was 60.42 g·m–3·h–1 at the inlet OLR of 66.45 g·m–3·h–1, with the critical EC being around 50 g·m–3·h–1. Even under a low gas empty bed residence time of 15 s, the preferable REs and ECs under middle or low OLRs were still obtained by the TBF.
Źródło:
Environment Protection Engineering; 2020, 46, 1; 15-29
0324-8828
Pojawia się w:
Environment Protection Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Research on peripheral clamping of large-aperture laser transport mirror
Autorzy:
Cao, Tingfen
Liu, Bowu
Wang, Hui
Ni, Wei
Zhang, Jinli
Chen, Xiaojuan
Li, Yingang
Zhou, Hai
Jiang, Xiaodong
Hu, Dongxia
Zhu, Qihua
Powiązania:
https://bibliotekanauki.pl/articles/27310087.pdf
Data publikacji:
2023
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
transport mirror
peripheral clamping
surface distortion
assembly structure
Opis:
This article introduces the study of peripheral clamping for large-aperture laser mirrors in high power laser facilities. Some multi-point clamping schemes were experimentally tested, the results of the experiments show that these schemes cannot meet the technical requirements, and in the simulation analysis, we explain the reason for this phenomenon. It is concluded that the additional bending moment caused by the non-ideal process factors in the multi-point clamping is the main cause for the surface distortion. Based on the above conclusions, we carried out research on minor-point clamping. Experimental verification of the minor-point clamping were done, the results show that the minor-point clamping can meet the requirements of technical indicators in whole process. This work can provide a reference for the design of the large-aperture transport mirror clamping structure, which may be used in huge laser devices and telescopes.
Źródło:
Optica Applicata; 2023, 53, 2; 227--238
0078-5466
1899-7015
Pojawia się w:
Optica Applicata
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Study on separation of fine-particle ilmenite and mechanism using flocculation flotation with sodium oleate and polyacrylamide
Autorzy:
Peng, Yang
Xiao, Junhui
Deng, Bing
Wang, Zhen
Liu, Nengyun
Yang, Daoguang
Ding, Wei
Chen, Tao
Wu, Qiang
Powiązania:
https://bibliotekanauki.pl/articles/1450088.pdf
Data publikacji:
2020
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
sodium oleate
polyacrylamide
synergistic effect
ilmenite
flocculation flotation
Opis:
In this paper, sodium oleate, polyacrylamide, soluble starch and sodium carboxymethyl cellulose were used as flocculants to study the flocculation and sedimentation behavior of microfine ilmenite. Sedimentation test shows that sodium oleate and polyacrylamide have good flocculation effect on ultrafine ilmenite. The flocculation rate of ilmenite can be further improved by the combination of sodium oleate and polyacrylamide. It was found that both flocculants could generate chemical adsorption with ilmenite surface, and they all react with $Fe^{3+}$ on ilmenite surface. However, sodium oleate reacts with $Fe^{3+}$ to form a water-insoluble iron oleate precipitate which coats the surface of the ilmenite and hinders the action of polyacrylamide and the remaining $Fe^{3+}$. This problem can be avoided by adding polyacrylamide followed by sodium oleate, and the flotation recovery can be increased significantly.
Źródło:
Physicochemical Problems of Mineral Processing; 2020, 56, 1; 161-172
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Evaluating measurement accuracy and repeatability with a new device that records spatial knee movement
Autorzy:
Tian, Fei
Huang, Qiuyue
Zheng, Zhi
Li, Ningwei
Zhu, Ting
Dai, Wei
Wang, Shaobai
Powiązania:
https://bibliotekanauki.pl/articles/27324129.pdf
Data publikacji:
2020
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
gait analysis
repeatability
motion analysis
three-dimensional
knee joint
analiza chodu
powtarzalność
analiza ruchu
trójwymiarowy
staw kolanowy
Opis:
Purpose: A novel portable system has been used to evaluate spatial knee movement, but its accuracy and repeatability is not known. The aim of this study was to investigate the accuracy and repeatability of the measurement. Methods: Ten healthy participants were included, and the knee motion trajectory during walking were assessed. Six evaluations were conducted (three days by two raters) for each participant. The motion parameters at the key points and the range of motion were statistically analyzed. Intraclass correlation coefficients (ICC), standard error of the measurement (SEM), and the Bland–Altman method were used. Results: For intra-rater repeatability, 1) the ICC values range from 0.75 to 0.9 for rotations; and 0.64 to 0.96 for translations. Among the ICC values, 100% of rotations and 90% of translations were not less than 0.70; 2) among the SEM values, 100% of rotations were not more than 5°, while 73.3% of translations were less than 3 mm. For inter-rater repeatability, 1) the ICC values range from 0.68 to 0.99 for rotations; and 0.57 to 0.93 for translations. Among the ICC values, 95.6% of rotations and 82.2% of translations were not less than 0.70; 2) among the SEM values, 100% of rotations were not more than 5°, and 48.9% of translations were less than 3 mm. The Bland–Altman plots showed good agreement for intra- and inter-repeatability. Conclusions: The results indicated that the accuracy and repeatability of the measurement were acceptable, except for the inter-rater repeatability for translation. This may help researchers and physicians better interpret the measurement data.
Źródło:
Acta of Bioengineering and Biomechanics; 2020, 22, 3; 55--67
1509-409X
2450-6303
Pojawia się w:
Acta of Bioengineering and Biomechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A Bidirectional Buck-Boost Converter-Based Switching Ripple Communication Strategy for Intelligent Street Lighting Systems
Autorzy:
Zhang, Yixuan
Hu, Yihua
Tse, Zion
Liu, Yuwei
Deng, Jiamei
Xu, Hui
Wang, Yangang
Li, Wei
Powiązania:
https://bibliotekanauki.pl/articles/1955998.pdf
Data publikacji:
2021
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
bidirectional switching ripple communication
buck-boost converter
intelligent street lighting system
pulse width modulation
smart city
Opis:
The light-emitting diode (LED) is an essential component of intelligent street lighting (ISL) systems. An efficient ISL system can not only reduce power consumption by planning LED illuminating time but also reduce maintenance costs through a high degree of automation. In this paper, a buck-boost converter is used to realise composite transmission of power and signals for an ISL system. The power is modulated by the pulse width modulation (PWM) approach, and the switching ripple generated in the PWM process is utilised as the carrier of the signals transmitted between the remote-control centre and the slave nodes. Moreover, the proposed model involves a ‘request to send (RTS)/confirm to send (CTS)’ mechanism to avoid signal conflicts. Compared with the conventional power line communication (PLC) approach, the proposed transmission scheme has the advantages of simple circuit structure and simple system wiring. Additionally, a simulation model built in MATLAB/Simulink proves the designed transmission method has strong anti-noise ability.
Źródło:
Power Electronics and Drives; 2021, 6, 41; 260-275
2451-0262
2543-4292
Pojawia się w:
Power Electronics and Drives
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Mineralogical factors affecting the separation behavior of Ta-Nbbearing minerals in the gravity field: mineral grain size, liberation, and association relationship
Autorzy:
Cheng, Hongwei
Xu, Jian
Wang, Shoujing
Lv, Zihu
Wei, Fushuai
Zhao, Dengkui
Wu, Dongyin
Powiązania:
https://bibliotekanauki.pl/articles/27323650.pdf
Data publikacji:
2023
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
separation behavior
gravity field
mineralogical characteristic
columbite-tantalite
association relationship
liberation
Opis:
Gravity separation is the primary method used to beneficiate Ta-Nb-bearing minerals, however, it performs poorly in low-grade and fine-grained ores. A comparative study of gravity separation products (concentrate, middlings, and tailings) reveals the factors affecting the separation behavior of Ta-Nb-bearing minerals in the process combined with a spiral chute and shaking table from the perspective of mineralogy. The results reveal that columbite-tantalite is the principal Ta-Nb-bearing mineral. As the grinding time increases, the grade of Ta and Nb in concentrate increases significantly. The grain size of columbite-tantalite in the concentrate is the coarsest, followed by that in the middlings, and the finest in the tailings, which are mainly distributed in the range of -150+38 μm, -75+20 μm, and -38 μm, respectively. The liberation degree of columbite-tantalite in the concentrate and tailings is positively correlated with grinding time, while that in the middlings is negatively correlated with grinding time. The density of columbite-tantalite-bearing particles in concentrate is mainly distributed above 3 or even 4, due to the high liberation degree of the columbite-tantalite in the concentrate, as well as the high amount of rich intergrowth associated with heavy minerals. The density of Ta-Nb-bearing mineral particles in the middlings and tailings is predominantly distributed in D<3, owing to columbite-tantalite mainly associated with lighter gangue minerals such as quartz, albite, and orthoclase. It demonstrates that the liberation degree is not the most essential factor in determining columbite-tantalite separation behavior in the gravity field, and the mineralogical characteristics of columbite-tantalite including grain size, association relationship, and particle density, may be more important. The results of this investigation can provide theoretical support for the strengthening separation of low-grade tantalum-niobium ore.
Źródło:
Physicochemical Problems of Mineral Processing; 2023, 59, 6; art. no. 174504
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-13 z 13

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies