Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "electric strength" wg kryterium: Temat


Wyświetlanie 1-3 z 3
Tytuł:
Electric strength of air and sulphur hexafluoride in the system with electrodes covered with dielectric double layer
Autorzy:
Zakrzewski, S.
Opydo, W.
Powiązania:
https://bibliotekanauki.pl/articles/97710.pdf
Data publikacji:
2012
Wydawca:
Politechnika Poznańska. Wydawnictwo Politechniki Poznańskiej
Tematy:
electric strength air
sulphur hexafluoride
aluminum oxide
Opis:
The paper presents the results of the study on the effect of dielectric double layer at electrode surface on electric strength of compressed air and compressed sulphur hexafluoride. The research has been carried out at alternate voltage of 50 Hz frequency. It was found that thin insulation coating laid on electrode surface, composed of aluminum oxide layer with a layer of electro-insulation polyester lacquer significantly improves electric strength of air and sulphur hexafluoride. It was found that maximum growth of electric strength of these gases was caused by the coating under their pressures exceeding the atmospheric one (3·105 and 5·105 Pa). The changes in configuration of electrode surface of the insulation systems caused by sparking over have been examined with scanning laser confocal microscope.
Źródło:
Computer Applications in Electrical Engineering; 2012, 10; 394-401
1508-4248
Pojawia się w:
Computer Applications in Electrical Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Sulphur hexafluoride as a high-voltage insulation - selected problems
Autorzy:
Opydo, W.
Juszczyk, Z.
Stawicki, J.
Opydo-Szymaczek, J.
Powiązania:
https://bibliotekanauki.pl/articles/97179.pdf
Data publikacji:
2014
Wydawca:
Politechnika Poznańska. Wydawnictwo Politechniki Poznańskiej
Tematy:
high-voltage insulation
electric strength
sulphur hexafluoride (SF6)
toxic byproducts
Opis:
The paper presents some selected properties of sulphur hexafluoride (SF6) a medium used for high-voltage insulation and electric arc suppression purposes. The results are presented of the studies aimed at determining the effect of the electrode material type, temperature, gas density and interelectrode gap on the SF6 electric strength. The considered systems had both flat electrodes or one flat and the other (cathode) having the form of a rod of 3 mm or 30 mm diameter, ended with a hemisphere. The electrodes have been made of stainless steel or aluminum. The results were mathematically processed with the use of the Statistica [11] computer software. It was found that SF6 temperature changes in the range from 243 K to 293 K with constant SF6 density did not cause variation of electric strength of the gas. Moreover, the effect of the electrode material type on electric strength of SF6 was observed only in the systems distinguished by macroscopic uniformity of the electric field and in case of the gas density exceeding 15 kg/m3, corresponding to SF6 pressure amounting about to 2.5-105 Pa in the temperature 293 K. Physical interpretation of the study results is proposed and formulated. Additionally, the paper discusses the hazards arising from the use of SF6 for the health of the persons operating the equipment and for the environment.
Źródło:
Computer Applications in Electrical Engineering; 2014, 12; 206-216
1508-4248
Pojawia się w:
Computer Applications in Electrical Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Review and comparison of electro-insulation properties of vacuum and sulphur hexafluoride
Autorzy:
Opydo, W.
Stawicki, J.
Opydo-Szymaczek, J.
Powiązania:
https://bibliotekanauki.pl/articles/97567.pdf
Data publikacji:
2013
Wydawca:
Politechnika Poznańska. Wydawnictwo Politechniki Poznańskiej
Tematy:
high-voltage insulation
electric strength
vacuum
sulphur hexafluoride
SF6
toxic byproducts
Opis:
The paper specifies the results of the tests on electric strength of vacuum, sulphur hexafluoride (SF6) and the insulation mineral oil under alternate voltage. The tests have been carried out for planar electrodes made of stainless steel or aluminum. It was found that 10-3 Pa vacuum, 3 105 Pa SF6, and insulation mineral oil situated with equal inter-electrode gap equal to several millimeters, have approximately equal electric strength. The degrees of influence of basic parameters of the insulation system on electric strength of SF6 and vacuum are presented. Advantages and faults of vacuum, SF6, and insulation mineral oil are mentioned, taking into account possible use of these media as a high-voltage insulation in various electric equipment. Mathematical processing of the test results was carried out with the use of the Statistica software [5].
Źródło:
Computer Applications in Electrical Engineering; 2013, 11; 222-229
1508-4248
Pojawia się w:
Computer Applications in Electrical Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-3 z 3

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies