Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "ultrafiltration" wg kryterium: Temat


Wyświetlanie 1-5 z 5
Tytuł:
Pobory wody przez mieszkańców budynku wielorodzinnego
Water consumption by multi-family building residents
Autorzy:
Żuchowicki, A. W.
Gawin, R.
Powiązania:
https://bibliotekanauki.pl/articles/1819678.pdf
Data publikacji:
2010
Wydawca:
Politechnika Koszalińska. Wydawnictwo Uczelniane
Tematy:
budynek wielorodzinny
woda pitna
pobór wody
ultrafiltration membranes
aqueous solution
organic substances
Opis:
Tendencja spadkowa zużycia wody utrzymuje się od ok. 1990 roku i mieści w granicach od 30% do 50% w skali miasta, jak i gospodarstwa domowego [1÷4]. Zmniejszające się zużycie wody jest spowodowane między innymi: zastosowaniem nowoczesnej armatury czerpalnej, zwiększającej się liczbie opomiarowanych mieszkań, upowszechnianiem świadomości konsumenta o wartości wody, wzrostem kosztów produkcji 1 m3 wody w efekcie jej ceny. Spadkowa tendencja zużycia wody jest jednym z czynników powodujących występowanie problemów eksploatacyjnych systemów wodociągowych, takich jak redukcja prędkości przepływu wody. W wyniku tego zjawiska zwiększa się czas przebywania wody w przewodzie, co z kolei prowadzi do zmiany jej jakości oraz konieczności intensyfikacji płukania przewodów [7]. W niniejszej pracy przeprowadzono analizę zużycia wody opierając się na miesięcznym zużyciu wody oraz jej ceny za 1 m3
Downward trend of water consumption is maintaining from about 1990. Its value is between 30% to 50% for a city, as well as household. Decreasing water consumption caused by, inter alia: using modem plumbing fittings, increasing number of measured households, dissemination of consumer awareness of the value of water, increase of production cost of 1 m3 of water and in the result its price. Downward trend in water consumption is one of the factors causing the operational problems of water supply systems, such as reduction of water speed. As a result of this phenomenon the residence time of water in the pipe increases, which in turn leads to change in the quality and the need of intensification of pipes flushing. In this paper an analysis of water consumption based on monthly water consumption and its price per m3 has been carried out. Data for analysis were obtained courtesy of Koszalin Housing Association "Nasz Dom". Analysis of water covered the period from March 2006 to December 2008. A multi-family, medium-high (five-floors), with class II sanitary equipment (multi-family buildings where the apartments are equipped with water, sewer, toilet and bathroom, with local unit for heating water) building was examined. The analysis showed a declining trend of water consumption (Fig. 3, Table 2). The average water consumption in the examined building is as follows (Fig. 3, 4, 5, Table 2): in 2006 amounted to 552.2 m3, 2007 - 502.5 m3 and in 2008 amounted to 505.5 m3o Given the price of 1 m3 of water is easy to see that with the increase of price of water (Fig. 1,2) decreases its consumption (Fig. 3). Increase dynamics of water prices in the examined period was as follows (2006 = 100%): in 2007 water prices increased by 11.3%, in 2008 qy 25.7%, and in 2009 by 43.9%. Indicator of unit water consumption in the surveyed building over the examinedperiod was characterized as follows: in 2006 amounted to 137.61 dm3/M'd, in 2007 - 114.37 dm3/M'd, and in 2008 115.06 dm3/M'd (Table 2), and it IS comparable to a standard water consumption, which is 100 dm3/Mźd.
Źródło:
Rocznik Ochrona Środowiska; 2010, Tom 12; 479-488
1506-218X
Pojawia się w:
Rocznik Ochrona Środowiska
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Usuwanie substancji organicznych z roztworów wodnych z wykorzystaniem ceramicznych membran ultrafiltracyjnych
Removal of organic substances from aqueous solutions with the use of ceramic membrane
Autorzy:
Kabsch-Korbutowicz, M.
Urbanowska, A.
Majewska-Nowak, K.
Kawiecka-Skowron, J.
Powiązania:
https://bibliotekanauki.pl/articles/1819673.pdf
Data publikacji:
2010
Wydawca:
Politechnika Koszalińska. Wydawnictwo Uczelniane
Tematy:
membrany ultrafiltracyjne
roztwór wodny
substancje organiczne
ultrafiltration membranes
aqueous solution
organic substances
Opis:
Procesy membranowe są obecnie szeroko stosowane w wielu gałęziach przemysłu oraz w szeroko pojętej ochronie środowiska do usuwania różnorodnych zanieczyszczeń zarówno o charakterze organicznym jak i nieorganicznym. W eksploatowanych na całym świecie instalacjach membranowych najczęściej stosowane są membrany wytwarzane z materiałów organicznych, np. polisulfonu, polietersulfonu, poliamidu lub materiałów celulozowych. Powszechność stosowania membran polimerowych wynika przede wszystkim z bardzo dużej dostępności membran o różnorodnych możliwościach separacyjnych. W związku z tym, iż polimery wykorzystywane do produkcji membran nie są odporne na działanie czynników chemicznych, termicznych i biologicznych, od dłuższego czasu trwają prace nad wytwarzaniem membran o znacznie większej wytrzymałości na działanie niekorzystnych czynników. Wymogi te spełniają membrany nieorganiczne wytwarzane z materiałów ceramicznych.
Membrane processes are now widely used in many industries and in the widely understood environment protection to remove the various pollutants of both organic and inorganic character. In the operated worldwide membrane installations membranes made from organic materials such as polysulphone, polietersulphone, polyamide or cellulosic materials are most commonly used. The universality of application of polymer membranes is primarily attributed to very high availability of membranes with various separational characteristics. In view of the fact that the polymers used for production of membranes are not resistant to chemical, thermal and biological factors, works in order to produce membranes with a much higher resistance to the action of unfavourable factors have been carried out for a long time. These requirements meets the inorganic membrane made from ceramic materials. The advantages of ceramic membranes, deciding about their their advantage over organic membranes, include primarily their high thermal, chemical, mechanical and biological resistance. Not without significance is the fact that they can be sterilized with steam and cleaned using strong acids or bases, which allows long-term operation of such membranes. The usability of the ultrafiltration ceramic membrane in removal of natural and synthetic organic pollutants from aqueous solutions has been evaluated. The ultrafdtration experiments have been carried out towards Odra river water, model solution containing NOM and model solutions of organic dyes (methyl orange, indigo carmine, hellion blue, direct black). The ultrafiltration ceramic membrane (cut-off 50kDa) made by Tami Industries and laboratory installation ProFlux Ml2 Millipore were applied in the tests. This installation allows to run separation tests in flow system using a filtration modules of any configuration. Installation enables circulation of the solution between the supply tank with a capacity of 3 dm3 and a filter module.The influence of the transmembrane pressure (0.03,0.06, and 0.09 MPa) on the process efficiency was determined. It was stated that the increase of the applied pressure caused the increase of permeate flux. In the course of ultrafiltration of solutions containing organic substances the determined membrane permeability was much lower (by 10-40%) than observed for water. The separation properties were influenced by the composition of the treated solution and the nature of the organic pollutants. The organic dyes of the molecular weight higher than 900 Da were retained in more than 95%. The reduction of color for solutions containing NOM amounted to 46-65%.
Źródło:
Rocznik Ochrona Środowiska; 2010, Tom 12; 467-478
1506-218X
Pojawia się w:
Rocznik Ochrona Środowiska
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Porównanie efektywności procesów podczyszczania odcieków składowiskowych
The Comparison of the Effectiveness of Pre-treatment Processes of Landfill Leachate
Autorzy:
Nowak, R.
Włodarczyk-Makuła, M.
Wiśniowska, E.
Grabczak, K.
Powiązania:
https://bibliotekanauki.pl/articles/1817981.pdf
Data publikacji:
2016
Wydawca:
Politechnika Koszalińska. Wydawnictwo Uczelniane
Tematy:
odcieki składowiskowe
prefiltracja
ultrafiltracja
koagulacja
popioły lotne
leachate
prefiltration
ultrafiltration
coagulation
fly ashes
Opis:
Dumping is the most frequently used method of municipal waste management. According to the data of Central Statistical Office of Poland at present there are over 390 municipal landfills in our country. Dumping of municipal waste is connected with generation of leachates. Treatment of leachates is difficult because of the variability of their composition. Leachates are generated as a result of penetration of rainwater through the waste layer. Rainwater leaches organic and inorganic compounds from waste material. Treatment method of leachate depends on its physicochemical properties, susceptibility for biodegradation and further management. Pretreatment of leachate is necessary before their treatment in wastewater treatment plant (WWTP). WWTP can be a part of dumping place infrastructure. Pretreated leachate can also be discharged into sewerage system. The most effective methods of leachate treatment are reverse osmosis and evaporation. The methods mentioned above are, however, not energy-efficient and as a result expensive. Frequently used method is also leachate recirculation onto waste pile. This method is not a good solution. Because of this it is expedient to examine effective and cheap methods of leachate pretreatment. The aim of the investigation was to compare the effectiveness of pre-treatment of landfill leachate using the processes of pre-filtration on the sand and gravel bed, ultrafiltration membrane module, coagulation, or sorption/precipitation in the solidified mixture of ash and water. These studies were carried out using effluent from two municipal landfills. The leachate was collected from the afore-mentioned landfills four times in the period from March to June. The efficiency of contaminants removal in the adopted process conditions were varied. The pH value, conductivity, color, turbidity, odor, alkalinity, acidity, free CO2, COD, total hardness, calcium and ammonium nitrogen in the raw leachate (collected from landfills) and after pre-treated processes were determined. The effectiveness of the removal of organic and inorganic compounds does not depend on the characteristics of the raw leachate. The highest effectiveness of contaminants removal was obtained in the filter bed of fly ash (27-93%). The percentage losses of the values of indicators, reaching 86% in the ultrafiltration process were achieved. The efficiency of treatment leachate in the coagulation or pre-filtraton process was at a lower level. It is proposed to integrate the processes of filtration or coagulation with ultrafiltration process in a 2- or 3-stage system. In an integrated 3-stage system for the leachate treatment, the preliminary stage could be filtration on a bed of sand and gravel, the next step - pretreatment in a bed of fly ash, and the final step – ultrafiltration process. In an alternative arrangement of leachate treatment system, a preliminary step would be using coagulation process.
Źródło:
Rocznik Ochrona Środowiska; 2016, Tom 18, cz. 2; 122-133
1506-218X
Pojawia się w:
Rocznik Ochrona Środowiska
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Efektywność oczyszczania ścieków przy zastosowaniu reaktora membranowego
Effectiveness of Wastewater Treatment with the Use of the Biological Membrane Reactors
Autorzy:
Konieczny, K.
Powiązania:
https://bibliotekanauki.pl/articles/1818639.pdf
Data publikacji:
2015
Wydawca:
Politechnika Koszalińska. Wydawnictwo Uczelniane
Tematy:
biologiczne oczyszczanie ścieków
ultrafiltracja
biologiczne reaktory membranowe (MBR)
biological wastewater treatment
ultrafiltration
membrane biological reactors (MBR)
Opis:
The paper compares the effectiveness of MBR reactor working on the pitot scale in the COŚ sewage treatment plant (No 1) with MBR in treatment plant ZOŚ (No 2) working on the full technical scale. In the COŚ wastewater treatment plant reactor was working in hybrid system: biological reactor with classical treatment - ultrafiltration (RM). It was compared the purification effectiveness of the classical biological reactor with secondary settling tank (RB), with purification effects obtained using membrane module (RM) fulfilling the role of secondary settling tank. Membrane installation BIO-CEL®-BC 10 type has been placed outside the activated sludge reactor. In the study the PES membrane (area 10 m2), made by the German company Microdyn-Nadir GmbH, has been used. In the first stage of the work, the results of physico-chemical analyses for raw and purified sewage for both systems, has been presented. The following pollutants indexes were determined: chemical oxygen demand (COD), biochemical oxygen demand (BOD5), the concentration of total nitrogen (Nog), the concentration of total phosphorus (Pog), suspension content, turbidity and conductivity at 25°C. In addition, for the determination of the filtration effectiveness, microbiological tests were carried out to check if permeate can poses a threat in terms of people heath. In the second part of the publication, the preliminary results of effectiveness of the wastewater treatment for the full technical scale in the sewage treatment plant ZOŚ (No 2) have been presented. For small bulk treatment plant with biological membrane reactors (MBR), exploitation conditions are given. Analyzed treatment plant, as a result of modernization, consists of a compact device for mechanical wastewater treatment and activated sludge reactor. Biological reactor applied PES ultrafiltration membranes made, as in the case COŚ, by Microdyn-Nadir GmbH. Membrane module fulfilled the same role as the classic secondary clarifier and served to separate purified wastewater from activated sludge. Analysis of wastewater quality confirmed high removal efficiency of organic pollutants (an average of 99% for BOD5 and above 97% for COD) and suspended solids (average 99%) in the studied sewage treatment plant. Comparing the efficiency of wastewater treatment in COŚ and ZOŚ sewage treatment plants, in which MBR has been installed, respectively in the pilot and full technical scale, removal degree of impurities was very high, in the range of 93–99%. The level of contaminants in both tested plants was similar. Obtained very high removal degrees of all determined pollutants, were definitely higher than that obtained in the classical biological treatment plants and definitely higher than the requirements given in regulation of the Environmental Minister [13]. An important achievement resulting from the research in COŚ treatment plant, supported by the results, is statement that permeates quality largely depends on the amount of oxygen delivered to the activated sludge tank and to the tank with membrane module. The best results were obtained for MBR system working in the continuous mode.
Źródło:
Rocznik Ochrona Środowiska; 2015, Tom 17, cz. 2; 1034-1052
1506-218X
Pojawia się w:
Rocznik Ochrona Środowiska
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The Application of Integrated System in Dairy Wastewater Treatment
Zastosowanie zintegrowanego system w oczyszczaniu ścieków mleczarskich
Autorzy:
Kwarciak-Kozłowska, A.
Gałwa-Widera, M.
Bień, J.
Powiązania:
https://bibliotekanauki.pl/articles/1813672.pdf
Data publikacji:
2018
Wydawca:
Politechnika Koszalińska. Wydawnictwo Uczelniane
Tematy:
dairy wastewater
photocatalysis
TiO2
ZnO
advanced oxidation process
ultrafiltration
ścieki mleczarskie
fotokataliza
zaawansowane metody utleniania
ultrafiltracja
Opis:
The study presented the results of the examinations obtained during treatment of dairy wastewater in a membrane photoreactor where photocatalysis was sequentially combined with low-pressure membrane process. The aim of the study was to determine the effectiveness of degradation of the contaminants contained in such wastewater during photocatalysis and in the arrangement that combined photocatalysis with ultrafiltration. Several experiments were performed in order to determine the most beneficial conditions of the photocatalysis process, e.g. the dose of the photocatalysts used (TiO2 and ZnO), duration of the process and pH of wastewater subjected to oxidation. The dose of titanium dioxide was changed from 1 to 40 g/dm3, whereas the content of zinc oxide ranged from 1 to 6 g/dm3. The results obtained in the study showed that the extension of the irradiation time to over 30 minutes (TiO2) and over 45 minutes (ZnO) during photocatalysis does not lead to increased removal of contaminants from the dairy wastewater. It was also demonstrated that the increase in the doses of both photocatalysts does not lead to the increase in the efficiency of their treatment. In the case of treatment of dairy wastwater with TiO2, the photocatalysis occurred most effectively for its dose of 10 g/dm3. Removal rates for COD, TOC and total nitrogen were 58% (1670 mg/dm3), 62% (450 mg/dm3) and 56% (128 mg/dm3), respectively. Replacing titanium dioxide with zinc oxide (ZnO – 2 g/dm3) in the photocatalysis process allowed for obtaining higher degrees of removal of contaminants determined as COD, TOC and total nitrogen to the level of 77.8% (870 mg/dm3), 62% (445 mg/dm3) and 52% (139 mg/dm3), respectively. Since both photocatalysts were supplied to the photoreactor in the form of a suspension, the membrane in the next reactor represented an efficient barrier for their particles. It was observed that higher volumetric stream of the permeate was obtained during the process of low-pressure membrane filtration of sewage initially treated in the process of photocatalysis with titanium dioxide (4.6·10-5 m3/m2·s – TiO2 and 4.1·10-5m3/m2·s – ZnO). It was found that the ultrafiltration process in the case of the feed material with TiO2 led to the reduction in COD, TOC and total nitrogen by 78% (370 mg/dm3), 72% (126 mg/dm3) and 40% (80 mg/dm3). Slightly better quality of permeate was obtained when the feed material contained ZnO powder. Degree of retention of the contaminants COD, TOC and total nitrogen were 68% (280 mg/dm3), 66% (143 mg/dm3) and 42% (76 mg/dm3), respectively.
W pracy zaprezentowano wyniki badań jakie otrzymano podczas oczyszczania ścieków mleczarskich w fotoreaktorze membranowy w którym sekwencyjnie skojarzono procesy fotokatalizę z niskociśnieniowym procesem membranowymi. Celem badań było określenie skuteczności degradacji zanieczyszczeń znajdujących się w tego rodzaju wodach odpadowych w samodzielnie prowadzonym procesie fotokatalizy jak również w układzie kojarzącym go z procesem ultrafiltracji. Przeprowadzono szereg eksperymentów w celu ustalenia najkorzystniejszych warunków prowadzenia procesu fotokatalizy tj. dawka zastosowanych fotokatalizatorów (TiO2 i ZnO), czas prowadzenia procesu oraz wartość pH ścieków poddawanych utlenianiu. Dawkę ditlenku tytanu zmieniano w zakresie od 1 do 40 g/dm3 a tlenku cynku od 1 do 6 g/dm3. Na podstawie uzyskanych wyników badań stwierdzono, że wydłużanie czasu naświetlania powyżej 30 minut (TiO2) oraz powyżej 45 min (ZnO) w procesie fotokatalizy nie wpływa na zwiększanie usunięcia zanieczyszczeń z oczyszczanych ścieków mleczarskich. Wykazano również, że zwiększanie stosowanych dawek obu fotokatalizatorów nie skutkuje wzrostu efektywności ich oczyszczania. W przypadku oczyszczania ścieków mleczarskich z TiO2 proces fotokatalizy przebiegał najkorzystniej jego dawce wynoszącej 10 g/dm3. Stopień usunięcia ChZT, OWO i azotu ogólnego wynosił odpowiednio 58% (1670 mg/dm3), 62% (450 mg/dm3) i 56% (128 mg/dm3). Zastąpienie ditlenku tytanu tlenkiem cynku (ZnO – 2g/dm3) w procesie fotokatalizy pozwoliło na uzyskanie wyższych stopni usunięcia zanieczyszczeń oznaczanych jako ChZT, OWO i azotu ogólnego odpowiednio do poziomu 77.8% (870 mg/dm3), 62% (445 mg/dm3) i 52% (139 mg/dm3). Z uwagi na fakt, że oba dawkowano do fotoreaktora w formie zawiesiny to znajdująca się w kolejnym reaktorze membrana była skuteczną barierę dla ich cząstek. Zaobserwowano, że wyższy objętościowy strumień permeatu uzyskano w trakcie prowadzenia procesu niskociśnieniowej filtracji membranowej ścieków wstępnie podczyszczonych w procesie fotokatalizy z ditlenkiem tytanu (4,6·10-5 m3/m2·s – TiO2 i 4,1·10-5 m3/m2·s – ZnO). Stwierdzono że wykorzystany proces ultrafiltracji w przypadku nadawy z TiO2 przyczynił się do obniżenia wartości wskaźników ChZT, OWO i azotu ogólnego odpowiednio o 78% (370 mg/dm3), 72 % (126 mg/dm3) i 40% (80 mg/dm3). Nieznacznie lepszej jakości permeat otrzymano, gdy nadawa zawierała proszek ZnO. Stopień retencji zanieczyszczeń ChZT, OWO i azotu ogólnego wynosił odpowiednio 68% (280 mg/dm3), 66 % (143 mg/dm3) i 42% (76 mg/dm3).
Źródło:
Rocznik Ochrona Środowiska; 2018, Tom 20, cz. 1; 602-615
1506-218X
Pojawia się w:
Rocznik Ochrona Środowiska
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-5 z 5

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies