Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Seal" wg kryterium: Wszystkie pola


Wyświetlanie 1-10 z 10
Tytuł:
New designs of magnetic fluid seals for reciprocating motion
Autorzy:
Matuszewski, Leszek
Bela, Piotr
Powiązania:
https://bibliotekanauki.pl/articles/2033241.pdf
Data publikacji:
2021
Wydawca:
Politechnika Gdańska. Wydział Inżynierii Mechanicznej i Okrętownictwa
Tematy:
magnetic fluid seal
reciprocating motion
critical pressure
sealing mechanism
failure reason of the seal
new seal designs
Opis:
The operating conditions of magnetic fluid seals during reciprocating motion are so different from those observed in rotating motion that the use of their conventional structures for reciprocating motion seals yields no good results. The analysis of the sealing mechanism of magnetic fluid seals in reciprocating motion shows that the operation of these seals is affected by the carry-over phenomenon and magnetic fluid film deformation in the sealing gap, which depends on the velocity of the reciprocating motion. The reduced amount of magnetic fluid in the sealing gap caused by the reciprocating motion of the shaft is the main reason for seal failures. The paper presents a short characterisation of magnetic fluid sealing technology, the principle of sealing, the operation of the magnetic fluid and the seal failure mechanism in linear motion of the shaft. Moreover, some new structural designs of hybrid seals, being combinations of typical hydraulic seals with magnetic fluid seals for reciprocating motion, and some examples of magnetic fluid sealing structures for hydraulic cylinders and piston compressors which havepractical application values are presented.
Źródło:
Polish Maritime Research; 2021, 4; 151-159
1233-2585
Pojawia się w:
Polish Maritime Research
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Life tests of a rotary single-stage magnetic-fluid seal for shipbuilding applications
Autorzy:
Matuszewski, L.
Szydło, Z.
Powiązania:
https://bibliotekanauki.pl/articles/258558.pdf
Data publikacji:
2011
Wydawca:
Politechnika Gdańska. Wydział Inżynierii Mechanicznej i Okrętownictwa
Tematy:
shaft sealing
magnetic fluid
utility water
seal durability
critical pressure
critical motion velocity
Opis:
Use of the magnetic fluid seal technology in water is much more difficult technological problem in comparison to gas or vacuum environment. Some seals constructed up to time been are designed as hybrid, two stage sealing structures with shields or mechanical seals used as protection measures to the magnetic fluid seal. Anyway, there is always problem with immediate contact between magnetic fluid and the environmental liquid. In the paper are presented results of experiments carried out with one stage rotating magnetic fluid seal operating in immediate contact with utility water. The special test procedures have been elaborated and practically used, with the aim to define main characteristics of magnetic fluid seals and to simplify experiments. These characteristics were: critical pressure, critical motion velocity and working life of the seal. Four grades of commercial, silicon based magnetic fluids of hydrophobic properties were tested in a single stage sealing system. The results of tests are presented in the form of tables and diagrams. It is concluded that hydrophobic commercial magnetic fluids could be efficiently used in rotating shaft seals however in a limited range of motion velocity.
Źródło:
Polish Maritime Research; 2011, 2; 51-59
1233-2585
Pojawia się w:
Polish Maritime Research
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Failure of magnetic fluid seals operating in water: preliminary conclusions
Autorzy:
Matuszewski, L.
Powiązania:
https://bibliotekanauki.pl/articles/259844.pdf
Data publikacji:
2017
Wydawca:
Politechnika Gdańska. Wydział Inżynierii Mechanicznej i Okrętownictwa
Tematy:
seal
magnetic fluid
Opis:
The article analyses properties of magnetic fluid seals installed in rotary sealing nodes which operate in the utility water environment. Seals of this type have been examined as a possible solution to the problem with ship manoeuvring propulsion sealing. The present analysis bases on laboratory durability tests of magnetic fluid seals exposed to longterm utility water loads, at different water pressures and shaft revolutions. The basic seal durability criterion was the number of revolutions made by the sealing node shaft until the appearance of water tightness loss (leakage). It was found that the main factor leading to the wear of the seal is the relative speed of the magnetic fluid with respect to that of the utility water, and this process is heavily affected by the pressure acting on the seal. The reported test results are presented in the form of diagrams showing the seal durability (time until water tightness loss) as a function of rotational speed. The curves shown in the diagrams are regular, with two different rotational speed ranges: the highspeed range, when the tightness loss is relatively fast, and the low-speed range, with a clear tendency to prolong the seal lifetime. These diagrams were given the name of durability curves of the MF seal operating in water. The results of the performed tests suggest formal similarity between the experimental data distribution concerning tightness loss processes occurring in magnetic fluid seals operating in water environment and metal fatigue processes. The article proposes a preliminary simplified durability model to describe the examined phenomenon.
Źródło:
Polish Maritime Research; 2017, 2; 113-120
1233-2585
Pojawia się w:
Polish Maritime Research
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Ring thruster – a preliminary optimisation study of ferrofluid seal and propeller
Autorzy:
Szydło, Z.
Matuszewski, L.
Powiązania:
https://bibliotekanauki.pl/articles/963466.pdf
Data publikacji:
2007
Wydawca:
Politechnika Gdańska. Wydział Inżynierii Mechanicznej i Okrętownictwa
Tematy:
ferrofluid seals
underwater propulsion
Opis:
The article reports the course of preliminary examination of a ferrofluid seal applied in liquid environment. A newly built research rig is described, and results of pressure tests performed for different shaft rotations are discussed. Other studies carried out in the past only referred to the gas environment, while the present examination aims at finding an answer to the question whether magnetic liquids can be successfully used in underwater applications. The obtained answer is positive, but further, more comprehensive investigations of the problem are necessary.
Źródło:
Polish Maritime Research; 2007, S 1; 71-74
1233-2585
Pojawia się w:
Polish Maritime Research
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Multi-stage magnetic-fluid seals for operating in water - life test procedure, test stand and research results. Part II Results of life tests of multi-stage magnetic - fluid seal operating in water
Autorzy:
Matuszewski, L.
Powiązania:
https://bibliotekanauki.pl/articles/259203.pdf
Data publikacji:
2013
Wydawca:
Politechnika Gdańska. Wydział Inżynierii Mechanicznej i Okrętownictwa
Tematy:
shaft sealing
magnetic fluid
utility water
seal durability
critical pressure
critical motion velocity
Opis:
The edge criteria for magnetic-fluid seals durability research were described in previous article [24] and now the tests results are presented. The tests were made with three magnetic fluids using various magnets quantity in magnetic assemblies. If values obtained in the repeated test deviated by more than 10 % from results of the first test an additional control test was made for final characteristics. The characteristics are: critical pressure, critical motion velocity and working life of the seal. The test stands were prepared for particular seals dimensions and results of tests are presented in the form of tables, cross section draws and diagrams. In conclusion one can see that multi-stage magnetic-fluid seals could be efficiently used in water for rotating shaft seals in a limited range of motion velocity and cycles quantity. Nevertheless a particular applications can be provided by magnetic-fluid seals only.
Źródło:
Polish Maritime Research; 2013, 1; 39-47
1233-2585
Pojawia się w:
Polish Maritime Research
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Experimental and optimization design of offshore drilling seal
Autorzy:
Zhang, Y.
Zhang, X.
Chang, X.
Wu, Q.
Powiązania:
https://bibliotekanauki.pl/articles/260627.pdf
Data publikacji:
2017
Wydawca:
Politechnika Gdańska. Wydział Inżynierii Mechanicznej i Okrętownictwa
Tematy:
offshore drilling
design optimization
seals
finite element analysis
MATLAB
Opis:
Three-cone bit is the key equipment in the exploration of the oil in offshore drilling and exploration, the bearing system and the seal system are the critical components for the bit. Especially in the offshore drilling environment, the seal design need to be carefully considered. A multi-objective optimization design including orthogonal design method and F-test with finite element analysis for a three-cone bit seal is proposed. Firstly, the calculation method of optimization targets are given, including the minimization of maximum contact pressure and leakage rate analyzed by ANSYS and MATLAB respectively, to maximize seal life and reliability. Then, an orthogonal experiment approach is used to investigate the effects of the eleven parameters on the seal performance, and the influence degrees of the seal factors on the optimization targets have been confirmed by F-test, and the reasonable factors can be determined by the trend of the targets. Finally, in order to validate the analysis results, a new seal was designed and tested on a seal tester compared to the previous seal. In this test, the seal maximum interface temperature that reflects the position of maximum contact pressure can be obtained by using three high precision thermocouples. Both the experiment results and the numerical analyses proved that the maximum contact pressure and leakage rate of the improved seal have been reduced compared to the previous.
Źródło:
Polish Maritime Research; 2017, S 3; 72-78
1233-2585
Pojawia się w:
Polish Maritime Research
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The application of magnetic fluids in sealing nodes designed for operation in difficult conditions and in machines used in sea environment
Autorzy:
Matuszewski, L.
Szydło, Z.
Powiązania:
https://bibliotekanauki.pl/articles/259830.pdf
Data publikacji:
2008
Wydawca:
Politechnika Gdańska. Wydział Inżynierii Mechanicznej i Okrętownictwa
Tematy:
FM seal
sealing
magnetic fluids
sea technology
propellers
Opis:
Presented in article MF seals are being researched for sea technology purposes due to their excellent tightness and low resistance of motion. These features are most valuable for ring propellers and ship’s main propeller shaft. There are more reasons why technologists payf significant attention for various MF seals applications in their difficult operating conditions. For instance, an advanced pumping systems are designed with contactless (screw or centrifugal) fluid seal used as the first stage seal and then the MF seal as the main seal. Further parts of the article contain discuss of the properties of magnetic fluids in the construction of MF seals. Sample of the few systems of magnetic fluid seals are presented, which have been researched lately in our laboratory including sea conditions. The magnetic fluids used in our seals are colloidal suspensions of magnetic nanoparticles. Undertaken earlier various systems selection for sea-water purposes forced us to focus on double sealing systems, in which the MF seal is used as the second seal following a conventional system especially adapted to co-operation with MF systems. This solution successfully limits direct contact of the sealed liquid with the magnetic fluid, and the entire sealing construction secures absolute tightness of the system. Using this solution we also can reduce costs by elements high accuracy avoidance. Research and design activities are carried out in the AGH Laboratory of Seals and Magnetic Fluid Applications together with Deep Water Department of Technical University of Gdansk over the use of magnetic fluid seals in sea water environment. These activities are oriented on working out MF seals able to work effectively in machines in which low-pressure water flow takes place. The objects of experimental investigations are seals having two different nominal diameters: 50 mm and 220 mm and two research rigs of different construction had to be built up. Works are scheduled to be continued.
Źródło:
Polish Maritime Research; 2008, 3; 49-58
1233-2585
Pojawia się w:
Polish Maritime Research
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Experimental research and CFD calculations based investigations into gas flow in a short segment of a heavily worn straight through labyrinth seal
Autorzy:
Joachimiak, D.
Krzyślak, P.
Powiązania:
https://bibliotekanauki.pl/articles/258744.pdf
Data publikacji:
2017
Wydawca:
Politechnika Gdańska. Wydział Inżynierii Mechanicznej i Okrętownictwa
Tematy:
labyrinth seals
turbomachines
fluid-flow machines
experiment
CFD
gas velocity
Opis:
Steam turbines are used as propulsion components in not only power plants but also on merchant and naval ships. The geometry of the steam turbine seals changes throughout the machine life cycle. The rate of deterioration of these seals, in turn, affects heavily the efficiency of the thermal machine. However, the literature overview does not provide any research reports on flow phenomena occurring in heavily deteriorated seals. The paper describes the course and results of investigations into a model straight through labyrinth seal composed of 4 discs, each with the slot height of 2 mm. The investigations have been conducted with air as the working medium. Changes of gas flow parameters due to wear were analysed. Based on the experimental data, more intensive leakage was observed as the result of the increased slot height. The static pressure distribution along the examined segment was measured. The experimentally recorded distribution differed remarkably from the theoretical assumptions. Another part of the experimental research focused on comparing the gas velocities at points situated upstream of the first and second seal disc. The velocity measurements were carried out using a constant temperature wire probe. This part of the investigations provided opportunities for analysing the influence of seal wear on gas flow conditions in the seal segment. The paper compares the results of the experimental research with those obtained using the CFX software. The presented results of velocity distributions provide a clear picture of the nature of the gas flow in the seal, which enables its analysis.
Źródło:
Polish Maritime Research; 2017, 2; 83-88
1233-2585
Pojawia się w:
Polish Maritime Research
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analysis of the impact of mass flow extraction on the change of parameters in a labytinth seal using the Stodola method
Autorzy:
Kaszowski, P.
Dzida, M.
Powiązania:
https://bibliotekanauki.pl/articles/2073619.pdf
Data publikacji:
2016
Wydawca:
Politechnika Gdańska. Wydział Inżynierii Mechanicznej i Okrętownictwa
Tematy:
labyrinth seals
Fanno curve
diagnostic extraction
Stodola
uszczelnienie labiryntowe
krzywa Fanno
ekstrakcja diagnostyczna
Opis:
Labyrinth seals are an important element of a steam turbine set design. The use of diagnostic extraction makes it possible to control the operation of a seal by providing information on the thermodynamic parameters along the length of the seal. Diagnostic extraction has a considerable impact on the change of the parameters, the amount of the extracted mass. This article describes the dependence of pressure in the clearance downstream of the extraction and in the chamber in which the extraction point is located, on the amount of the extracted steam. Relation between pressure and nominal seal clearance is discussed, which enables the control of the seal operation. The calculations of the seal operation parameters were performed using a method proposed by Stodola.
Źródło:
Journal of Polish CIMEEAC; 2016, 11, 1; 55--67
1231-3998
Pojawia się w:
Journal of Polish CIMEEAC
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Multi-stage magnetic-fluid seals for operating in water – life test procedure, test stand and research results. Part. I. Life test procedure, test stand and instrumentation
Autorzy:
Matuszewski, L.
Powiązania:
https://bibliotekanauki.pl/articles/260287.pdf
Data publikacji:
2012
Wydawca:
Politechnika Gdańska. Wydział Inżynierii Mechanicznej i Okrętownictwa
Tematy:
shaft sealing
utility water
seal durability
critical pressure
critical motion velocity
magnetic fluid
Opis:
The edge criteria for magnetic-fluid seals durability research are critical for the seal’s technological usefulness. The magnetic fluid seal technology in water is much more difficult technological problem in comparison to gas or vacuum environment. There is always problem with immediate contact between magnetic fluid and the environmental uninspected liquids. In the paper are presented ways of experiments definitions carried out with multi-stage rotating magnetic fluid seal operating in permanent contact with utility water. The special test procedures have been elaborated and practically used, with the aim to define main characteristics of magnetic fluid seals. These characteristics were: critical pressure, critical motion velocity and working life of the seal. Some grades of commercial, silicon based magnetic fluids of hydrophobic properties were tested in sealing system. The test stand and its features as well as results of tests are presented in the form of tables, cross section draws and diagrams. In conclusion one can see that multi-stage magnetic-fluid seals could be efficiently used in water for rotating shaft seals in a limited range of motion velocity and work lasting.
Źródło:
Polish Maritime Research; 2012, 4; 62-70
1233-2585
Pojawia się w:
Polish Maritime Research
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-10 z 10

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies