Temat: surface finishing - Katalog OPAC zbiorów

Skocz do pozycji: 1.

Tytuł:: The finishing of composite coatings in aspect of surface roughness reduction
Autorzy:: Dyl, T. C.
Powiązania:: https://bibliotekanauki.pl/articles/242029.pdf
Data publikacji:: 2013
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: composite coatings
flame spraying
cutting inserts
surface finishing
Opis:: The influence of the shape and grade of inserts upon the geometric structure of the composite coatings Ni-5%Al- 15%Al2O3 and alloy coatings of Ni-5% Al is considered in the paper. Nickel matrix coatings were sprayed by the Casto-Dyn 8000 torch on a steel substrate, and then subjected to straight turning. Determining of the optimum geometry of indexing is now synonymous with the selection of the optimum shape and dimensions of the insert and of an appropriate holder. According to cutting board it was selected square, triangular, trigon inserts, made of carbide and of cubic boron nitride (borazon). Machining of nickel-based coatings was carried out for the cutting speed vc = 214 m/min in the case of treatment with borazon inserts, vc = 107m/min in case of plates treated with tungsten carbide cutting, using the feed fn=0.06mm/rev and the depth of cut ap = 0.3 mm. Metal cutting the surface of steel samples coated with a composite coating containing 15% Al2O3 based on nickel, conducted for the cutting speed vc = 157 m/min when machining with borazon inserts and for vc = 83 m/min inserts with tungsten carbide for feed fn = 0.06 mm/rev and depth of cut ap = 0.3 mm. Highly precise finishing of flame spraying composite and alloy coatings was carried out using turning by tool with borazon inserts. Flank (VB) and attack (KB) wear coefficient of inserts while maintaining a constant spiral cutting length (SCL) were determined. Important elements parts (such as engines, pumps, centrifugal separators) are regenerated during long-term utilization. This paper proposes the use of regenerated technology subsonic flame thermal spraying and surface finishing by turning composite and alloy coatings of ship machinery parts.
Źródło:: Journal of KONES; 2013, 20, 2; 75-81
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 2.

Tytuł:: Finishing intermetallic coatings in order to reduce the surface roughness
Autorzy:: Dyl, T. C.
Powiązania:: https://bibliotekanauki.pl/articles/247045.pdf
Data publikacji:: 2013
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: thermal spraying
intermetallic coatings
surface finishing
cutting inserts
Opis:: The paper presents a shape and grade of inserts depending on the surface roughness of the intermetallic coatings NiAl and Ni3Al. Intermetallic coatings on nickel based were sprayed with a torch Casto-Dyn 8000 on the steel samples. Thermal spraying intermetallic coatings have been high surface roughness, and therefore they must to be finishing. Experimental research was conducted for unalloyed steel samples with thermal spraying NiAl and Ni3Al intermetallic coatings. Before applying coatings, the samples surface was properly prepared by stream abrasive working, degreasing and finally by cleaning of oxidation products. To testing cutting inserts shape selects square and trigon made tungsten carbide and cubic boron nitride (borazon). Machining intermetallic nickel based coatings were carried out for the cutting speed vc = 214 m/min in the case of after-machining with inserts of borazon, vc = 107 m/min cutting inserts for tungsten carbide, used feed fn = 0.06 mm/rev and depth of cut ap = 0.3 mm. Intermetallic coatings are characterized by high resistance to tribology wear. These materials are used in such fields of technology, such as: electronics, energy, defense, automotive, aviation, shipbuilding, and more industry. The NiAl and Ni3Al intermetallic have found widespread applications as high – temperature structural material due to their high melting point, low density, good thermal conductivity and excellent oxidation resistance. The paper proposes the finishing flame sprayed intermetallic coatings.
Źródło:: Journal of KONES; 2013, 20, 1; 77-82
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 3.

Tytuł:: Improving the quality of technological surfaces of machines of composite coatings
Autorzy:: Dyl, T. C.
Starosta, R.
Powiązania:: https://bibliotekanauki.pl/articles/243120.pdf
Data publikacji:: 2014
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: composite coatings
flame spraying
surface finishing
technological quality
Opis:: Nickel matrix coatings were sprayed by the Casto-Dyn 8000 torch on a steel substrate, and then subjected to straight turning. Determining of the optimum geometry of indexing is now synonymous with the selection of the optimum shape and dimensions of the insert and of an appropriate holder. According to cutting board, it was selected square, triangular, trigon inserts, made of carbide and of cubic boron nitride (borazon). Machining of nickel-based coatings was carried out for the cutting speed vc = 214 m/min in the case of treatment with borazon inserts, vc = 107 m/min in case of plates treated with tungsten carbide cutting, using the feed f =0.06 mm/rev and the depth of cut ap = 0.3 mm. Metal cutting the surface of steel samples coated with a composite coating containing 15% Al2O3 based on nickel, conducted for the cutting speed vc = 157 m/min when machining with borazon inserts and for vc = 83 m/min inserts with tungsten carbide for feed f = 0.06 mm/rev and depth of cut ap = 0.3 mm. Highly precise finishing of flame spraying composite and alloy coatings was carried out using turning by tool with borazon inserts. Flank (VB) and attack (KB) of turning tool wear while maintaining a constant length of spiral cutting (LSC) were determined. The effect of the shape and grade of inserts upon the geometric structure of the composite coatings and is considered in the paper. The article can determine the shape and grade of inserts is necessary to obtain sufficient quality of the shaft of centrifugal pumps with a composite coating.
Źródło:: Journal of KONES; 2014, 21, 1; 75-82
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 4.

Tytuł:: The influence of the geometry of the cutting edge and machining parameters of duplex cast steel after turning
Autorzy:: Dyl, T. C.
Powiązania:: https://bibliotekanauki.pl/articles/246936.pdf
Data publikacji:: 2018
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: turning
finishing
forming surface layer
surface roughness reduction
duplex cast steel
Opis:: The development and research activity is connected to the production of newer and more functional products. Innovative processes are being developed and applied; services and projects are delivered. Products are work items that should be initially designed, then manufactured and finally sold and utilized. Examples of products may be airplanes, ships, cars, machine tools, gears, crankshafts, drive shaft, tubes as well as gasoline, electricity and gas, etc. The product has to meet the expectations of the future use. It is characterized by a set of functional features. In the case of machines and their capabilities and performance, for example, durability, reliability, resulting from the characteristics represented by the structural units forming the structure. The formation of the desired features of the surface layer in the technological process is an important problem due to the ability of the elements of kinematic pairs to fulfil the function as long as possible foreseen for them. The article presents results of experimental studies of turning cast steel grade GX2CrNiMoCuN25-6-3-3. The aim of the research was to determine the geometry of the cutting edge and the technological parameters of cutting that are conducive to obtaining the roughness in the field of very accurate machining. It can achieve the appropriate technological quality of the workpiece surface. After these experimental studies was determined that there is a reduction roughness using suitable inserts. Turning was made for the duplex cast steel. The technological parameters of machining process were used: feed rate f = 0.1-0.2 mm/rev, depth of cut ap = 0.5 mm, cutting speed vc = 50-100 m/min. Turning was made using universal lathe CDS 500x1000 equipped with CCMT carbide tipped inserts.
Źródło:: Journal of KONES; 2018, 25, 4; 75-81
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Informacja

Wyszukujesz frazę "surface finishing" wg kryterium: Temat

Źródło danych

Dostawca treści

Kolekcja

Rok wydania

Wydawca

Temat

Autor

Typ dokumentu

Język