Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "microscope" wg kryterium: Temat


Wyświetlanie 1-9 z 9
Tytuł:
Surface topography of slide journal bearings
Autorzy:
Miszczak, A.
Czaban, A.
Powiązania:
https://bibliotekanauki.pl/articles/246105.pdf
Data publikacji:
2011
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
atomic force microscope
surface topography
journal bearing
Opis:
In this article the measurements results of surface topography of different types of slide bearings sleeves have been presented. The research has been conducted with the use of atomic force microscope (AFM). The results of measurements of surface topography were presented in the form of surface topography maps, three-dimensional graphs and some examples of selected cross-sections of investigated surface in the form of profile graphs. Measurements of surface topography were made for thin-walled sleeves of slide journal bearings covered with PTFE, POM, bronze and white metal layers. Operated and new sleeves have been considered with the use of Atomic Force Microscope NT-206produced in MTM in Minsk, Republic of Belarus [2]. Atomic Force Microscope NT-206 provides information for samples with maximum roughness value plus or minus 1 mi m. Max. field in one scanning process is up to 32)um x 32mi m. Measurements were preceded with resolution 256x256points. Presented in the work results of surface topography measurements also include the calculated values of average deviation profile Ra and Rq and the value of fixed distance between the lowest and highest inequality. The application SurfaceXplorer was used for processing and visualization of the data obtained from AFM NT-206, which besides from generating 2D, 3D and profile diagrams, was used to calculate and draw graph of height distribution. The comparison of received data will allow verifying type and amount of surface wear of discussed journal micro-bearings parts in micro and nanoscale and will help to design surface layers with improved tribological properties.
Źródło:
Journal of KONES; 2011, 18, 3; 279-285
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The effect of measurement method for assessing stereometric structure of surface
Autorzy:
Pelc, A.
Starosta, R.
Powiązania:
https://bibliotekanauki.pl/articles/245502.pdf
Data publikacji:
2017
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
top layer
roughness
contact profilometer
confocal laser microscope
surface topography
Opis:
The article presents the influence of measuring methods of surfaces topography evaluation. Surface topography was measured using a mechanical, contact method by Hommel Tester T-8000-R60 profilometer (Gdynia Maritime University) and using the contactless, optical method by Olympus Lext OLS4100 Confocal Laser Scanning Microscope (Gdynia Maritime University). A pattern of roughness grade 4 sample was studied (standards PN-58/M-02425 (Ra=10 μm, Rz=40 μm)). Seven measurements were made on each of devices, resulting in a more accurate stereometric image of the sample surface. The area of the test was 1.5×1.5 mm. The radius of the edge of the blade imaging the surface used in the contact method was 2 μm. In the case of the optical method, the test sample surface was subjected to a laser light 405 nm long. This article describes the principle of used measuring instrument operation and their advantages and disadvantages. The results and descriptive statistics (Mann–Whitney U test, Kolmogorov–Smirnov test) of surface altitude parameters, such as Sa, Sp, Sq, Sv, Sz. There were statistically significant differences in topography values between measurements by T-8000 profilometer and Confocal Laser Scanning Microscope. It was noted that the values of the parameters Sa, Sq are higher with the T-8000 profilometer as a measuring device. The parameters Sp, Sv, Sz have a higher value, when measured on a Confocal Laser Scanning Microscope.
Źródło:
Journal of KONES; 2017, 24, 2; 177-182
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Surface topography of non-operated slide journal micro-bearings
Autorzy:
Czaban, A.
Miszczak, A.
Powiązania:
https://bibliotekanauki.pl/articles/242167.pdf
Data publikacji:
2011
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
atomic force microscope
surface topography
microgrooves
herringbone grooves
micro-bearing
Opis:
In this paper authors present results of measurements of slide journal bearings surface topography measured with an atomic force microscope (AFM). The results of measurements of surface topography were presented in the form of surface topography maps, three-dimensional graphs and some examples of selected cross-sections of investigated surface in the form of profile graphs. Measurements of surface topography were made for journals and sleeves of slide journal micro-bearings from personal computers' hard drives and fans, with the Atomic Force Microscope NT-206 produced in MTM in Minsk, Republic of Belarus. The values of profile roughness parameters Ra and Rq and the distance between maximum peak height and maximum valley depth are presented as well. The application SurfaceXplorerŽ was used for processing and visualization of the data obtained from AFM NT-206, which besides from generating 2D, 3D and profile diagrams, was used to calculate and draw graph of height distribution. Surface pictures of investigated bearings sleeves were made with the optical microscope Zeiss Axiovert 25+. That measurements give information about micro-grooves dimensions and location. On the surfaces of studied micro-bearings some micro-grooves can be found in form of herringbone, with depth about 1.5mi m and width 150/mi m. Received information about micro-grooves geometry will allow to develop proper theory of hydrodynamic lubrication for micro-bearings with micro-grooves. Topography of surfaces of investigated journal micro-bearings will be reconsidered after exploiting them proper amount of time.
Źródło:
Journal of KONES; 2011, 18, 2; 109-115
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Surface topography of operated slide journal micro - bearings used in computer fans
Autorzy:
Miszczak, A.
Czaban, A.
Labuda, W.
Powiązania:
https://bibliotekanauki.pl/articles/242980.pdf
Data publikacji:
2012
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
atomic force microscope
surface topography
microgrooves
herringbone grooves
micro-bearing
Opis:
In this paper authors present results of measurements of slide journal bearings surface topography measured with a profilometer and an atomic force microscope (AFM). Surface topography of investigated bearings (i.e. journals and sleeves) was measured using the Hommeltester T8000- R60 profilometer. The results of these measurements give information about micro-grooves dimensions and location. Measurements of surface topography were made for journals and sleeves of slide journal micro-bearings from personal computers fans, with the Atomic Force Microscope NT-206 produced in MTM in Minsk, Republic of Belarus. The results of measurements of surface topography were presented in the form of surface topography maps, threedimensional graphs and some examples of selected cross-sections of investigated surfaces in the form of profile graphs. The values of profile roughness parameters Ra and Rq and the distance between maximum peak height and maximum valley depth are presented as well. The application SurfaceXplorer registered trademark was used for processing and visualization of the data obtained from AFM NT-206, which besides from generating 2D, 3D and profile diagrams, was used to calculate and draw graphs of height distribution. In this research authors used two identical sets of micro-bearings. The investigated bearings are: a) Kama Flow SP0825FDB12H fan with grooved surface of bearing sleeve, b) Xilence Case fan which sleeve surface was without grooves. First set of that micro-bearings functioned for a year at rated RPM continuously (i.e. 24 hours a day). Second set of the same micro-bearings also functioned for a year at rated RPM, but in intermittent mode (i.e. 15 minutes on, 15 minutes off). On the surfaces of studied micro-bearings some microgrooves can be found in form of herringbone, with depth about 1-2..m and width 100-150..m. Received information about microgrooves geometry will help to develop proper theory of hydrodynamic lubrication for micro-bearings with microgrooves and allows determining how the mode of operating affects on the wear of co-operating surfaces.
Źródło:
Journal of KONES; 2012, 19, 4; 457-463
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Validation of microscopy measured porosity in carbon fibbers composites
Autorzy:
Jędral, Arnold
Bona, Anna
Powiązania:
https://bibliotekanauki.pl/articles/244963.pdf
Data publikacji:
2019
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
porosity
carbon fibre
microscope
UT
Ultrasonic test
CT
computed tomography
Opis:
One of the most common defects in carbon fibrereinforced plastics (CFRP) is porosity. Too much of those defectscould be serious problemsto mechanical properties, which directly take effect on elements safety, like aircrafts. Therefore, the evaluation of porosity is very important test. Microscopic observations are widely used as a quality instrument in materials and constructions inspections. Cross section image of a material is easy to prepare and analyse. Porosity of a carbon fibrereinforced plasticcan be clearly spot in such kind of images. Study shows that in the most cases porosity appear between layers of fibres , rather between fibres. Unfortunately,image from microscope is only 2D picture from a small representative region. Because of that,comparison of 2D image to a real porosity distribution in all volume of a material is very difficult. To verify 2D microscopic observation method is necessary to perform another kind of tests. In this article , authors focused on non-destructive (NDT) and destructive testing methods. 2D porosity images from light microscope were compared with three different testing methods: ultrasonic test (UT), computed tomography (CT) test and constituent content of composite materials standard test method according to ASTM D3171 – 15, procedure B. Porosity results obtained from dissolution of resin from the carbon-epoxy resin sample.
Źródło:
Journal of KONES; 2019, 26, 4; 83-90
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Structure analysis of the surface of plunger and barrel assembly in the injection pump pumping section
Autorzy:
Miszczak, A.
Powiązania:
https://bibliotekanauki.pl/articles/246030.pdf
Data publikacji:
2014
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
atomic force microscope
surface topography
roughness
plunger
barrel
injector pump
pumping section
Opis:
Precision surfaces in a diesel engine’s fuel system are used in the two components. First one is the pumping section in the injection pump. The second ones are injectors. In this paper authors present results of the topography measurements of the surface of plunger and barrel assembly in the injection pump pumping section. The measurements were performed using the atomic force microscopy (AFM) NT-206. The measured surface topographies were shown in the form of two and three-dimensional views of selected areas of the investigated surfaces. There are also presented the profiles of the selected area cross-sections as well as roughness height distribution and cumulative height distribution of roughness. Additionally, the basic parameters describing the surface roughness, such as: a roughness average Ra, a root mean square value Rq of roughness, a skewness Ssk (Rsk) and kurtosis Sku (Rku), are also specified. The samples (plungers and barrels), which have been measured, come from the injection pump pumping section as a new ones and after estimated period of operation time. The lateral precision surfaces have been measured. The atomic force microscope NT-206 allows to perform scanning of the measured surface with maximum are dimensions of 32 μm x 32 μm and maximal roughness height of ± 1 m. Scanned surfaces was divided into 256x256 measuring points and the measurements were performed in the static (contact) mode. After surface scanning on the atomic force microscope, the data was calculated in the SurfaceXplorer® 1.311 or Gwyddion 2.35 software. In this paper, only selected surfaces from the several dozen performed scans are shown. The obtained results allow to determinate the degree and type of wear of tested surfaces at the micro-level.
Źródło:
Journal of KONES; 2014, 21, 3; 227-234
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Surface topography analysis of precision assemblies of fuel injector nozzles
Autorzy:
Miszczak, A.
Labuda, W.
Grondecki, M.
Powiązania:
https://bibliotekanauki.pl/articles/246251.pdf
Data publikacji:
2014
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
Atomic Force Microscope
surface topography
roughness
plunger
barrel
injector pump pumping section
Opis:
Precision surface assemblies can be found in the two locations in a fuel system of a diesel engine. These parts are the pumping section in an injection pump and the injector nozzles. In this paper the authors present the results of surface topography measurements of precise surface assemblies of some fuel injectors. The measurements have been made with the atomic force microscope (AFM) NT-206. The results of surface topography measurements were presented in the form of 2D and 3D images and also as surface roughness profiles in some selected cross-sections of the investigated surfaces. It has been also shown cumulative roughness height distribution and roughness height distribution as well as Minkowski volume (first Minkowski functional). After scanning the surface on the atomic force microscope, the obtained data were processed with the SurfaceXplorer ® 1.311 and Gwyddion 2.35 software. The study concerned some new injector nozzles and also injector nozzles after a certain time of operation. The side and the conical precise surface assembly of the injector nozzle body and needle were tested. The atomic force microscope NT-206 allows to perform a surface scan of the sample with maximum dimensions of 32x32 μm and a maximum height of roughness ± 1 μm. Scanned area was divided into 256x256 measurement points, while the measurement was carried out in a static (contact) mode. The results presented in this paper also includes the calculated values of Ra, Sa (roughness average) and Rq, Sq (root mean square roughness) surface roughness parameters and the value of the skewness Ssk (Rsk), kurtosis Sku (Rku) and maximum distance between the lowest valley and the highest peak of investigated surface – Rt. The obtained data allow evaluating the degree and type of wear of tested surfaces on the micro-scale.
Źródło:
Journal of KONES; 2014, 21, 4; 353-360
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Surface topography of operated slide journal micro - bearings used in HDD
Autorzy:
Miszczak, A.
Powiązania:
https://bibliotekanauki.pl/articles/242978.pdf
Data publikacji:
2012
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
atomic force microscope
surface topography
microgrooves
herringbone grooves
micro bearing in HDD
Opis:
In this paper author present results of measurements of slide journal micro-bearings surface topography measured with an atomic force microscope (AFM). The results of measurements of surface topography were presented in the form of surface topography maps, three-dimensional graphs and some examples of selected cross-sections of investigated surface in the form of profile graphs. Measurements of surface topography were made for journals and sleeves of slide journal micro-bearings from personal computers' hard disc drives, with the Atomic Force Microscope NT-206 produced in MTM in Minsk, Republic of Belarus. In this research author used two identical sets of micro-bearings from 2.5" HDD Samsung HM160HI 5400rpm and 3.5" HDD Seagate Barracuda 7200.10 ST380815AS 7200 rpm hard disc drives. First set of those four microbearings worked for a year at rated RPM continuously (i.e. 24 hours a day). Second set of the same micro-bearings also worked for a year at rated RPM, but in intermittent mode (i.e. 15 minutes on, 15 minutes off). The values of profile roughness parameters Ra and Rq and the distance between maximum peak height and maximum valley depth are presented as well. The application SurfaceXplorer registered trademark was used for processing and visualization of the data obtained from AFM NT-206, which besides from generating 2D, 3D and profile diagrams, was used to calculate and draw graph of height distribution. Surface topography of investigated bearings sleeves was also measured using Hommeltester T8000-R60 profilometer. Those measurements give information about micro-grooves dimensions and location. On the surfaces of studied micro-bearings, some micro-grooves can be found in form of herringbone, with depth about 1.5..m and width 150..m. Received information about micro-grooves geometry will allow developing proper theory of hydrodynamic lubrication for micro-bearings with micro-grooves.
Źródło:
Journal of KONES; 2012, 19, 4; 449-456
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analysis of surface topography of slide journal bearings and micro - bearings
Autorzy:
Miszczak, A.
Powiązania:
https://bibliotekanauki.pl/articles/247394.pdf
Data publikacji:
2013
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
surface topography
atomic force microscope
static contact mode
height distributions of surface roughness
Opis:
In this paper, the author presents the results of measurements of the slide journal bearings and micro-bearings sleeves and journal surfaces. The study was performed with the atomic force microscope (AFM) NT-206. The results of measurements of surface topography are presented in the form of a 2D and 3D map of surface topography and also in the form of profiles for selected cross-sections of examined surfaces. Additionally, the height distributions of surface roughness are presented. The Atomic Force Micsroscope NT-206 allows investigating the surface of sample with maximum scanning area 32μm x 32μm and with the maximum value of roughness ±1μm. The measurements can be carried out in three modes: static (contact) mode, dynamic (non-contact) mode, dynamic intermittent mode. The author used the contact mode. The application of this mode of operation, in the case of samples with a hard surface, for example, the journal of a bearing, enables to obtain a good mapping of the measured surface. The presented in this paper results of surface topography measurements, include the calculated values of the Ra and Rq parameters and also the maximum value of the distance between the lowest and the highest surface inequality. The obtained results allow evaluating the amount and type of wear of researched elements in the micro-scale and they also are useful in the design of such surface layers of co-operating components, in order to obtain optimum tribological properties. When considering the impact of the surface roughness on the change of height of bearing gap, and consequently the change of flow and operating parameters, the information about average distribution of roughness value is required. With such measurements, it is possible to obtain these data. In the presented research the micro-bearings from personal computers hard drives, as well as classic bearings and sleeves, were investigated.
Źródło:
Journal of KONES; 2013, 20, 4; 285-292
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-9 z 9

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies