Temat: impact simulation - Katalog OPAC zbiorów

Skocz do pozycji: 1.

Tytuł:: Preliminary investigation of dynamic loads of the crew of the armoured personnel carrier during frontal crash
Autorzy:: Borkowski, W.
Hryciów, Z.
Powiązania:: https://bibliotekanauki.pl/articles/241797.pdf
Data publikacji:: 2008
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: armoured personnel carrier
impact
passive safety
computer simulation
Opis:: On the work one described chosen problems concerning of threats of the crew of the armoured personnel carrier with dynamic loads during crushing the obstacle. One paid attention on the lack of regulations regulative this problems. One described the general construction, and also worked out model of the armoured personnel carrier and crashed object. To the modelling one used the software LS-DYNA, using the method of finite elements. One gave also conditions for carrying out the numeric research. On the work one placed example results of numerical tests, deformations and stresses in the hull of the vehicle and in the crashed gate. One placed also example-courses of the speed and accelerations of chosen elements of the vehicle and people inside. On the basis on received results of simulation research one evidenced high level threats of the crews, liable to be effective with serious offences, particularly of the head and the spine. One qualified also directions and the range of further works targeting the improvement of the safety of the crew, in this taking into account the use of investigative dummy man. To further research one proposed models of dummy man Hybrid III, which for the necessity of taking in to consideration of additional elements of the equipment of soldiers (e.g. the helmet, the weapon, the bullet-proof vest) must be however properly modified. One pointed also on the necessity of working out the additional protective devices and also formulate the methodology of the experimental research.
Źródło:: Journal of KONES; 2008, 15, 4; 57-62
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 2.

Tytuł:: Investigations of composite energy absorbing elements
Autorzy:: Niezgoda, T.
Barnat, W.
Kiczko, A.
Powiązania:: https://bibliotekanauki.pl/articles/243633.pdf
Data publikacji:: 2008
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: impact test
FEM simulation
passive safety
composite structure
energy absorbing materials
Opis:: In this work the problem connected with an improvement of the road safety through implementation of additional elements absorbing the hitting energy is taken into consideration. The experimental results of a basic absorbing element of the glass epoxy composite are presented. The results of these tests will serve for the construction of a reliable numerical model of a panel of protective elements. The coincidence between the experimental and numerical results is also proved, showing that introduced approach to the modelling of the process of the progressive destruction and the energy absorption by composite elements is not only properly assumed but is very promising for the future. Efforts, which lead to increase the amount of absorbed energy need actions, directed to improving absorbing energy properties of used elements. Therefore, the received results will serve as guidelines for elaboration the methodology of the research structures of that type and also could be used in further research works within the scope of increasing the road security. In the article it is also proved that there is the necessity to conduct the series of comparative experiments and also tests verifying numerical studies at loading speeds, which can be compared with ones in reality, e.g. crash test or shock wave of an explosion. The validated, in such way, method of numerical simulations enables the limitation of costly and long-lasting research of real objects.
Źródło:: Journal of KONES; 2008, 15, 3; 405-409
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 3.

Tytuł:: Numerical simulations of mechanical peening of titanium alloy
Autorzy:: Kosiuczenko, K.
Barnat, W.
Napadłek, W.
Bogdanowicz, Z.
Powiązania:: https://bibliotekanauki.pl/articles/243311.pdf
Data publikacji:: 2008
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: surface layer forming
mechanical shot peening
impact
numerical simulation
finite element method
Opis:: Mechanical peening is based on striking a worked material surface by hard balls (shot).In this work, a pneumatic method, applied for double-sided shot peening of the worked sample surface, was selected. The samples were made of the titanium alloy WT3-1 (Ti-6Al-2Cr-2Mo). The described work consists of two parts. The laboratory experiment was conducted in first part. After it realization, various observations were conducted. Observations of surface topography for samples were carried out before and after shot peening using scanning electron microscope (SEM). They revealed quite regular plastically deformed zones generated due to applied working. Neither microcracks, spallings nor delaminations in deformed surface layer of the titanium alloy were observed which attests to correct technological process of the surface hardening. The numeric simulation of the peening process was conducted in part second. The physical model described non-simultaneous impact of three steel balls onto rectangular metal sheet made of the above-mentioned titanium alloy. Numerical FEM analysis for nonlinear dynamics (explicit) was carried out using LS-Dyna software (Livermore Software Technology Corporation). In the paper are presented maps of the material effort in surface layers for times corresponding to conditions after impacts of the first, second, and the third ballof cast steel shot.
Źródło:: Journal of KONES; 2008, 15, 1; 137-144
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 4.

Tytuł:: Reduction of deformation in a spring-mass realisation of human chest occurred after action of impact
Autorzy:: Olejnik, P.
Awrejcewicz, J.
Powiązania:: https://bibliotekanauki.pl/articles/245999.pdf
Data publikacji:: 2010
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: elastic impact
multi-dimensional dynamical system
rheological model
human chest
LQR algorithm
numerical simulation
Opis:: This paper takes into consideration active control of a mechanical construction modelling a human chest subject to impulsive elastic loading coming from a fast moving light mass. The effect of impact causes some essential deformation in the form of distance decreasing between the front and back side of the chest resulting from compression of internal organs. One can attenuate such a destructive proces s by introduction of fast-response active control elements attached to the front or back side of the chest i.e., from the direction of impacting mass or between back and support of the body. The problem of one- or two-dimensional control is not easy to perform because of the consideration of the very short time of system's reaction. At this stage there has been used an effective numerical procedure for both solution and LQR control method application in a dynamical system of three separated elastically (rheologically as well) linked masses. Direction-dependent coefficients of the rheological link (extending our system to the seventh state-space dimension) govern different properties of internal organs during their stretching and compression. It puts into the control scheme's matrices time-dependent coefficients of damping influencing the optimal linear quadratic regulator used in control.
Źródło:: Journal of KONES; 2010, 17, 1; 327-335
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 5.

Tytuł:: Results of preliminary experimental research and computer simulation concerning assessment of injury risk of occupants of military off-road vehicle impacting an obstacle
Wyniki wstępnych badań eksperymentalnych oraz komputerowej symulacji zagrożenia osób w trakcie uderzenia w przeszkodę wojskowego samochodu terenowego
Autorzy:: Orłowski, L.
Powiązania:: https://bibliotekanauki.pl/articles/246460.pdf
Data publikacji:: 2007
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: samochód terenowy
uderzenie
bezpieczeństwo bierne
ryzyko obrażeń
symulacja komputerowa
off-road vehicle
impact
passive safety
computer simulation
injury risk
Opis:: A survey was made on the available designs of guard rails, gates and other structures of the type, the "Dzik"-type vehicle might have to ram into during some operations. Basing on the conducted analyses, two typical models of those barriers were constructed. The first, rigid barrier had a form of concrete block of 6000 kg, while the flexible one was made of steel sections. Since no "Dzik" vehicle was available, a series of preliminary experiments were made on a "STAR" truck which had a similar frame and a bumper located at the same level. The vehicle was subjected to a proper load and during the experiment it impacted the constructed barriers. In the course of crash the values of most important parameters (forces, accelerations) were registered. The results obtained allowed for parametrical identification of a numerical model developed using the MADYMO software. Numerical simulations were performed for different crash speed with the numerical models of human and dummies adapted accordingly to take into consideration that the crew is supplied with bullet-proof jackets and helmets. Both the "sled-test" type numerical simulations, in which the accelerations measured in experiment were employed (after proper adjustment, for higher velocities), and simulations of the complete barrier-vehicle-occupant system were performed. Basing on the numerical simulation results the level of risk the crew is exposed to have been estimated, proving the necessity for developing a proper crew protection system. The scope of further experimental and numerical investigations, to achieve the goal, has been determined.
Przeprowadzono przegląd stosowanych rozwiązań w zakresie budowy ogrodzeń, bram i podobnych konstrukcji, dla których może pojawić się konieczność taranowania w trakcie akcji z wykorzystaniem pojazdu typu „Dzik". Na podstawie przeprowadzonych analiz opracowano dwie typowe przeszkody modelowe. Przeszkodę sztywną zrealizowaną w postaci betonowego bloku o masie 6000 kg na betonowym podłożu i przeszkodę podatną w postaci Stalowych kształtowników. Dla tak zbudowanych modeli przeszkód przeprowadzono serie badań doświadczalnych (dla bezpiecznych zakresów prędkości zderzenia) wykorzystując, wobec okresowego braku możliwości użycia pojazdu „Dzik", odpowiednio obciążony samochód STAR o zbliżonej konstrukcji ramy i takim samym poziomie zderzaka. Przeprowadzone badania eksperymentalne, w których rejestrowano przebiegi istotnych wielkości (sił, przyspieszeń) w trakcie zderzeń, pozwoliły na identyfikację parametrów modelu symulacyjnego opracowanego w środowisku systemu MADYMO. Przeprowadzono szereg symulacji komputerowych (dla różnych prędkości zderzenia) z wykorzystaniem komputerowych modeli człowieka i manekinów z bazy MADYMO. Oryginalne modele, opracowane dla zastosowań „cywilnych", zostały odpowiednio zmodyfikowane — uwzględniono fakt wyposażenia załogi pojazdu w czasie interwencji w kamizelki kuloodporne i hełmy. Przeprowadzono zarówno badania typu „sled-test", w których jako wymuszenie wykorzystano bezpośrednio przyspieszenia rejestrowane w czasie badań eksperymentalnych (odpowiednio przeskalowane dla większych prędkości), jak też badania pełnego modelu przeszkoda-pojazd-załoga. Wykorzystując wyniki symulacji komputerowych określono poziom zagrożeń dla załogi pojazdu uzasadniający potrzebę opracowania odpowiedniego systemu zabezpieczenia załogi. Określono również kierunki oraz zakres niezbędnych dalszych prac eksperymentalnych i symulacyjnych.
Źródło:: Journal of KONES; 2007, 14, 3; 485-494
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Informacja

Wyszukujesz frazę "impact simulation" wg kryterium: Temat

Źródło danych

Dostawca treści

Kolekcja

Rok wydania

Wydawca

Temat

Autor

Typ dokumentu

Język