Temat: gears - Katalog OPAC zbiorów

Skocz do pozycji: 1.

Tytuł:: Preliminary research of prototypes helical gears for power transmission systems
Autorzy:: Sobolak, M.
Jagielowicz, P. E.
Powiązania:: https://bibliotekanauki.pl/articles/245597.pdf
Data publikacji:: 2009
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: rapid prototyping
bevel gears
Opis:: The toothed gears are used in the power transmission systems. It is result from advantages of them (e.g. efficiency, reliability, fatigue life, high-load transmission). In the power transmission systems for trucks, and for cars with back drive, gear pairs are used. In that case it is possible to transfer turning moment under right angle. The most common in use in so-called main axle are bevel or hypoid gear pairs. Differential gears are mainly built basis of straight bevel gears. The paper presents method of preliminary determination of usability bevel gears for transfer turning moment. The method uses gears' models which are made with Rapid Prototyping techniques. The gears are placed in the testbed, which enables to steady load of gear pair. The observation of tooth contact makes possible to preliminary evaluate of correctness of gear pair's working. The tooth contact's changes are observed during gear rotation. The direct observation of tooth gears can be done using transparent material for gears. Besides, it is possible to determine temporary tooth contact and its changes in function of gears' rotation for existing metal gear pairs. In order to analyse, it is necessary to make copy of existing gears vacuum cleaning method. It uses the silicone forms as a template to make copies. It should be use transparent material. The method enables to analyse tooth contact in gear pairs after lifetime, thereby evaluating impact of working on correctness of gear pairs' working.
Źródło:: Journal of KONES; 2009, 16, 3; 375-380
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 2.

Tytuł:: Visualization of internal stress pattern in gears in power transmission systems using rapid prototyping (RP)
Wizualizacja naprężeń w kołach zębatych układów napędowych z wykorzystaniem metod RP
Autorzy:: Sobolak, M.
Budzik, G.
Powiązania:: https://bibliotekanauki.pl/articles/243874.pdf
Data publikacji:: 2008
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: rapid prototyping
gears
photoelasticity
Opis:: The paper contains description of an experimental method of stress pattern visualization. Mainly analytical methods and a Finite Element Method are used to determine internal stress pattern. Sometimes photo-elasticity is used. Model is made by copying real objects by casting from special optical-active resins. There is possible to put into use Rapid Prototyping methods. Some materials used in RP processes are optically active. In proposed solution of stress pattern visualization special models of gears are used. Models are made directly from optically active resin by Rapid Prototyping method - stereolitography. A transparent fotohardening optically active resin Sl5170 has been used to observe stress pattern in polarized light. Prototypes of gear are assembled in a special device and loaded by torque. The principle of a mechanical similarity was applied. In relation to the classic photo-elasticity method novelty is the use of the LCD monitor as a source of light and a camera with polarisation filter for observation and recording the distribution of internal stress pattern. The use of simulation of gear generating in CAD system and stereolitography method to produce a prototype allows you to eliminate the classic machining of gear at lower cost.
W artykule przedstawiono eksperymentalną metodę wyznaczania rozkładu naprężeń. W celu określenia rozkładu naprężeń używane są metody analityczne i komputerowe wykorzystujące metodę elementów skończonych. W niektórych przypadkach użycie znajduje elestooptyka. Modele do elastooptyki są kopiami rzeczywistych obiektów, wykonanymi z materiału czynnego optycznie. Możliwe jest zastosowanie techniki szybkiego prototypowania w celu wykonania takiego modeluo. Niektóre z materiałów używanych w szybkim prototypowaniu są czynne optycznie. W proponowanym rozwiązaniu w wizualizacji naprężeń w kołach zębatych układów napędowych używane są specjalne modele kół. Modele są wykonane bezpośrednio z żywicy czynnej optycznie metodą stereolitografii. Użyto przezroczystej, fotoutwardzalnej żywicy Sl5170 w celu wyznaczenia rozkładu naprężeń. Modele kół obserwowano w świetle spolaryzowanym. Koła zestawiono w specjalnym przyrządzie i obciążono momentem skręcającym. Zastosowano zasadę podobieństwa modelowego. W stosunku do klasycznej metody elastooptyki nowością jest zastosowanie monitora LCD jako źródła światła oraz aparatu fotograficznego z filtrem polaryzacyjnym do obserwacji i rejestracji rozkładu naprężeń. Zastosowanie symulacji obróbki obwiedniowej w systemie CAD oraz wytworzenie kół za pomocą stereolitografii elimnuje klasyczną obróbkę skrawaniem i przyczynia się do obniżenia kosztów badań.
Źródło:: Journal of KONES; 2008, 15, 2; 457-461
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 3.

Tytuł:: Analysis of possibility of applying atypic al meshing in driving units of cars
Autorzy:: Kozik, B.
Budzik, G.
Pacana, J.
Powiązania:: https://bibliotekanauki.pl/articles/242388.pdf
Data publikacji:: 2009
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: gears
involute profile
atypical meshing
Opis:: A constant tendency in the development of gear transmission is aiming for increasing its load capacity and minimalizing its outside dimensions and weight. It is particularly important in automotive vehicles. In every type of transmission, among others in gear-boxes, mainly involute profile wheels are used. The work presents analysis of possibility of applying a typical meshing in driving units of cars. This kind of meshing can be alternative to involute meshing which is most widely used in gear transmission. Among existing solutions of this type, Nowikow meshing is applied most often. A different kind of concavo-convex gearing is BBW type gearing. The gearing is obtained by generation with a tool with reference profile in which tooth profile of a rack is an involute. The analysis of possibility of applying has been carried out with the exemplary concavo-convex BBW type gearing. In BBW type gearing a wheel with a smaller number of teeth has a positive profile curvature, and a cooperating wheel has a negative curvature. Teeth profiles are conjugate ones, transverse contact ratio is higher than l, so this kind of gearing may be used also in gears with straight teeth. What is more linear contact occurring along the whole width of mating teeth, in comparison to point contact in Nowikow meshing, creates possibilities of obtaining higher load capacity of gearing. BBW gearing based on involute-derivative tooth profiles is characterized by smaller sensitivity to the change of axle distance than Nowikow meshing.
Źródło:: Journal of KONES; 2009, 16, 2; 225-230
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 4.

Tytuł:: Design of polymer gears for auxiliary power transmission systems of automotive vehicles
Autorzy:: Budzik, G.
Sobolak, M.
Jagiełowicz, P. E.
Powiązania:: https://bibliotekanauki.pl/articles/247538.pdf
Data publikacji:: 2010
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: polymer gears
auxiliary power transmission systems
Opis:: he polymer gears owing to their advantages are used in auxiliary power transmission systems of automotive . For example, the gears occur in transmissions of drives of car wipers or drives of car windows. The polymers are mainly used owing to lower production cost than in steel gears. The better silent-running and corrosion z are their other advantages in comparison with steel gears. Unfortunately, the polymer gears are not devoid of disadvantages. The main disadvantages are the lower efficiency and the lower capacity and what follows — the bigger dimensions. The conservative attitude of design of polymer gears is still noticeable. As a rule, such gears e steel gears, but the polymer gears are designed with bigger module. The most probably owing costs and lack of proper design recommendations, for design of polymer gears is used geometry of classic steel gears, because the procedure of analytical strength calculations for classic gears is well-know. The gears made from polymers are built in the mould matrices. In constructions of many mechanisms, the gears can be replaced in case of consumption or damage, so the construction of such gears that can be produced in the machine shop equipped with gear generating e for standard gears, was justified. Nowadays, the constructions of mechanisms used in automotive vehicles are often not even dismountable, but the whole mechanism is changed. It is worth changing the attitude to design of such transmissions. The method of gears production gives many opportunities. The production of gears with ited geometry, also such geometry that is impossible to obtain using traditional methods of machining, is possible in the mould matrices.
Źródło:: Journal of KONES; 2010, 17, 4; 73-77
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 5.

Tytuł:: Analysis of surface roughness of transmission gear teeth made by different rapid prototyping methods
Autorzy:: Budzik, G.
Markowski, T.
Sobola, M.
Powiązania:: https://bibliotekanauki.pl/articles/244106.pdf
Data publikacji:: 2008
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: surface roughness
rapid prototyping
bevel gears
Opis:: Article presents analysis of surface roughness of aircraft and vehicle power transmission system gear teeth made by different Rapid Prototyping methods. Gear box models have been made by two rapid prototyping methods: stereolithography (SLA), three dimensional printing (3DP) and two rapid tooling methods: Vacuum Casting (VC), Low Pressure Injection (LPI). Surface roughness for rapid prototyping methods is determined mostly by layered system of building model. It depends on process parameters: layer thickness and model position in working space of RP machine. Vacuum Casting and Low Pressure Injection are Rapid Tooling technologies. For this technology final surface roughness is a reflection of surface parameters of tools (silicon mould, silicon matrix). The paper presents results of surface roughness measurements of gear made by few RP and RT methods. The most important thing was an analysis of surface roughness made by Rapid Tooling methods. In these methods surface roughness depends on surface parameters of basis RP model. For basis RP models finishing processing was applied. This process improves parameters of the surface. This research process allowed to define the influence of chosen RP and RT method and its parameters on surface roughness of gear tooth. It permitted to order rapid prototyping methods for application of power transmission prototype making process.
Źródło:: Journal of KONES; 2008, 15, 2; 29-34
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 6.

Tytuł:: Parameters selection of shot peening gears of carburized and hardened steel 21NiCrMo2
Autorzy:: Tchórz, T.
Śnieżek, L.
Grzelak, K.
Mierzyński, J.
Powiązania:: https://bibliotekanauki.pl/articles/245218.pdf
Data publikacji:: 2016
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: materials engineering
shot peening
vehicles
gears
Opis:: This article presents the methodology of shot peening gears’ parameters selection used in agricultural tractor transmission. The gears made of steel have been treated with 21NiCrMo2 thermal-chemical consisting of carburization to the depth of 0.8 mm and subsequently hardened. The hardness of the side teeth surface after hardening was 58 HRC. The same process of thermo chemical was used for flat samples with dimensions 120×12×5 mm. Prepared samples were divided into two series. First shot peening was treated with spherical pellet with a varied diameter from 0.4 mm to 2.5 mm. For second series samples additional treatment of shot peening was not carried out. Then micro-hardness, roughness and longitudinal and transverse residual stresses were measured. As a result of the studies, there were selected parameters of shot peening, exerting the greatest influence on favourable residual stresses distribution in the surface layer of material and an increase in microhardness. At the same time, particular attention was paid to the morphology of samples surfaces after shot peening. There were rejected the parameters of shot peening, which caused damage to the surface in the form of visible cracks and craters. Based on the analysis presented in this article there were selected shot peening parameters, which will be applied during the additional dynamic surface processing of gears, used in the tractor’s drive system.
Źródło:: Journal of KONES; 2016, 23, 2; 389-395
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 7.

Tytuł:: An analysis of criterion for choosing constructional solutions for aeronautical multi-power path gear units
Autorzy:: Kozik, B.
Powiązania:: https://bibliotekanauki.pl/articles/245533.pdf
Data publikacji:: 2011
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: aeronautical gears
toothed wheels
aeronautical power drives
Opis:: Contemporary aeronautical constructions require applying systems of drive transmission based on gear units. Trends in development of aeronautical gears assume diminishing weight of the gear retaining its basic features which are; the possibility of transmitting high load and reliability. The article presents an analysis of criterion for choosing constructional solutions for aeronautical multi-power path gear units. A few criteria were chosen for the analysis: constructional solutions of aircrafts (planes, helicopters), constructional solutions of engine- moment receiver system and a kind of applied drive. Because the field of issues connected with aeronautical drive transmission systems is very wide, the material and technological factors were not taken into account. They are a subject of separate analysis. The main aim of the presented analysis is determining the criterion for choosing constructional solutions of drives based on existing solutions which allow for implementing new solutions for newly developed aeronautical constructions on the prototype stage. Modernising existing constructional solutions is difficult to put into practice because of procedures followed in the aeronautic industry. That is why the carried out analysis aims at preparing solutions for research on the stage of making a virtual and demonstrative prototype. The final effect of such analysis and research can be developing a solution for gear unit parts assuring the possibility of transmitting a given moment while diminishing, for example, weight in comparison to gears which are produced nowadays. This factor is extremely important for parts of aeronautical constructions.
Źródło:: Journal of KONES; 2011, 18, 3; 169-175
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 8.

Tytuł:: Quality control and inspection of bevel gears of the aircraft gearbox utilizing the ATOS 3D scanner
Autorzy:: Marciniec, A.
Budzik, G.
Dziubek, T.
Grzelka, M.
Powiązania:: https://bibliotekanauki.pl/articles/248064.pdf
Data publikacji:: 2012
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: bevel gears
3D scanning
quality control
Opis:: Quality control gears o aircraft gearbox has become a key component in today's manufacturing process. Optical 3D scanning, based on the principle of fringe projection, has proven to be both an accurate and cost-effective alternative delivering more dimensional information to aid in quality control and process optimization by creating more meaningful measuring reports. The ATOS 3D BLUE LIGHT optical scanner has a unique capability of being user-configurable to address various measuring requirements. This is accomplished via the user’s ability to change measuring volumes in minutes, in order to increase scan data resolution or increase the measuring field of view. The paper present the opportunity to automate the measurement process of bevel gears, using coordinated optical scanner ATOS 3D "white light" version and "blue light" version. Using coordinate measuring technique, you can specify a set of methods and procedures for the designation of the complex dimensions of physical objects and transform them into a computer program space of coordinate measuring devices. The topics included in the article are intended to show the capabilities of the device used to improve the measurement process and shorten its time, and hence, lower its costs in both version of ATOS Scanner. Another thing described in the paper is the impact of measurement performance in automatic mode on the quality of performance - the numerical image of scanned surface, from the standpoint of accuracy and number of collected data points in the shortest time. The article includes an analysis of conditions related to the measurement works, such as the process of preparing the model and measurement equipment and data processing capacity.
Źródło:: Journal of KONES; 2012, 19, 1; 261-266
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 9.

Tytuł:: Tooth contact analysis of hypoid gear transmission prototypes manufacturing with vacuum casting methods
Autorzy:: Budzik, G.
Markowski, T.
Sobolak, M.
Cygnar, M.
Powiązania:: https://bibliotekanauki.pl/articles/242202.pdf
Data publikacji:: 2009
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: tooth contact analysis
vacuum casting
hypoid gears
Opis:: The article presents the experimental method of instantaneous contact area in hypoid gear transmission. The prototypes of hypoid gear have been made with one of the rapid prototyping method — Vacuum Casting process. This method permits to manufacture gear wheel with very complicated tooth profile in silicone tool (form or matrix) created in vacuum chamber with reduced pressure. Silicone matrix allows creating prototype in casting process or low pressure process. Silicone matrix has been made on the basis of gear transmission of car transmission system. Gears were made of transparent polymer materials to enable observation of the instantaneous contact area. The instantaneous contact area is that tooth flank surface area, which is in contact with mating surface of another tooth at a specific moment. Correct mating of gears and their kinematic precision depend on the shape and size of instantaneous contact area, as well as on changes during gear 's rotation. Contact between gear surfaces of geometrically ideal gearbox occurs at a point or line, but, because of a deformability of mating teeth flanks, in reality it is always a certain surface. The method of tooth contact area as described in the paper, permits a dynamic determination of the gearbox mating area. Existing experimental methods permit only a static observation of the mating area.
Źródło:: Journal of KONES; 2009, 16, 3; 63-68
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 10.

Tytuł:: A demonstrative prototype of aeronautical dual-power path gear unit
Autorzy:: Budzik, G.
Powiązania:: https://bibliotekanauki.pl/articles/247271.pdf
Data publikacji:: 2011
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: aeronautical gears
toothed wheels
aeronautical power drives
Opis:: The paper presents a process of designing, modelling and manufacturing of a demonstrative prototype of a dual-power path gear unit to be applied in aeronautical systems of drive transmission. The process of making a demonstrator of a dual-power path gear unit by means of 3D-CAD modelling and Rapid Prototyping has been described here. Designing gears is based on Computer Aided Design (CAD), Computer Aided Engineering (CAE), Computer Aided Manufacturing (CAM) systems including also Rapid Prototyping (RP). The first stage of the designing process of a gear unit is always defining basic parameters of gear work (among others; power, rotational speed, transmission ratio) depending on the unit's predestination. On the basis of the above, the calculation of main constructional parameters is carried out. Subsequently, it is possible to make 3D-CAD models of toothed wheels and the remaining parts of the gear unit. In case of designing demonstrative prototypes, it is important to take into consideration the assumptions of modelling similarity to a real gear unit. 3D-CAD systems are often equipped with modules for analysing geometrical parameters and cooperation of individual parts of the unit for example the area of contact. A detailed analysis of cooperation of gear parts of the unit allows for detecting models' faults early and for deleting them. After making 3D-CAD models one can approach to creating a prototype by means of Rapid Prototyping methods. It is necessary to prepare the numerical data essential as a subsequent stage of the process of making the demonstrator. On that basis the individual parts of the gear unit are made in an incremental process. The accuracy of creating a physical prototype depends mainly on the accuracy of a 3D-CAD/3D-RP model prepared in a process of processing numerical data. A demonstrator described in the paper has been made by means of FDM method. The prototype allowed for analysing constructional solutions of gear units on a physical model and for preparing assumptions for introductory stand tests.
Źródło:: Journal of KONES; 2011, 18, 4; 41-46
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 11.

Tytuł:: The influence of contour number on load carrying capacity of gears in aircraft gearbox demonstrator made by MEM
Autorzy:: Budzik, G.
Kozik, B
Łączek, A.
Cieplak, M
Powiązania:: https://bibliotekanauki.pl/articles/950153.pdf
Data publikacji:: 2014
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: test stand
Rapid Prototyping (RP)
aircraft gearbox
gears
Opis:: The paper presents an outcome of load carrying tests of gears in an aircraft gearbox demonstrator made of ABS B601polymer by means of INSPIRE D290 device. These tests checked an influence of an additional number of contours in gear models on durability of cooperating wheel pair during stand tests. The CAD models of the gears for stand tests were made in Autodesk Inventor program and were used as a base for making physical models. Therefore, Inventor files were exported to STL format. The following stage of data preparation was made in Model Wizard. The gears for stand tests were made by means of MEM method on INSPIRE D290 printer. Unlike most devices, this printer makes it possible to control not only the density of the filling in a model, but also to increase the number of contours. ABS polymer was chosen to make the gears. The choice was due to its good properties and because it is commonly used and also because it was possible to make the parts of the gearing at the Rzeszow University of Technology. Subsequently the gear pair was fixed on a test stand. The stand was designed in an open system. It was powered by a three-phase 0.75 kW electric motor. The control was provided by a single-phase inverter. Load on the stand was provided by an electromagnetic powder brake. This paper is a part of implementation of the research task number 4 „Development of a new, simpler and cheaper toothed gear in place of complicated and expensive planetary gears” of the project „Modern material technologies in aerospace industry."
Źródło:: Journal of KONES; 2014, 21, 3; 29-34
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 12.

Tytuł:: Experimental method of tooth contact analysis (TCA) under load using rapid prototyping (RP)
Eksperymentalna metoda określania chwilowego śladu styku w obciążonej przekładni
Autorzy:: Sobolak, M.
Powiązania:: https://bibliotekanauki.pl/articles/242750.pdf
Data publikacji:: 2007
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: przekładnie zębate
ślad styku
gears
Tooth Contact Analysis (TCA)
Opis:: The paper contains description of an experimental method of Tooth Contact Analysis (TCA). In practice there is mainly more than one pair of teeth in contact in gear. In determined orientation of gear wheels instantaneous contact ellipses occur between teeth. Shape and size of the contact ellipses are dependent on gear material, geometry and load. In manufacturing practice only mating areas are determined on control machines without operating load. Mainly analytical methods and a Finite Element Method are used to determine instantaneous contact ellipses. It is essential to observe changes in instantaneous contact ellipses relative to the rotations of wheels in gear drive in the range of a single pitch. In proposed solution of the problem the instantaneous contact ellipses and bearing area are experimentally determined using a rapid prototyping (RP) process. Prototypes of gear are assembled in a special device and loaded by torque. A transparent resin has been used to observe the instantaneous contact pattern. The principle of a mechanical similarity was applied.
Źródło:: Journal of KONES; 2007, 14, 4; 441-446
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 13.

Tytuł:: Optimization and unification of two - stage helical gear reducer
Autorzy:: Krasiński, M.
Trojnacki, A.
Powiązania:: https://bibliotekanauki.pl/articles/243615.pdf
Data publikacji:: 2013
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: transmission
gear reducer
helical gear
optimization
unification of gears
Opis:: Gears were used in ancient times although in a primitive form. A turning point in the rapid development of gears was in the late nineteenth and early twentieth century. In this time the invention of high-performance tools, highresistant materials and the creation of sufficient, accurate methods of heat and chemical treatment took place. Further improvement by optimizing the transmission structure, and the unification of its components is of great practical and economic importance. These problems are presented in this contribution. In particular, this paper deals with the problem of optimization and unification of two stage helical gear reducer with axial and opposite input and output shafts. The basic goal of this study is to unify the case because the case is one of the most expensive transmission elements. In connection with that, it is possible to put into the same case different sets of wheels to obtain predetermined different total gear ratios. An optimization procedure is very useful for a choice of the set of gear wheels. The total mass of gear wheels is assumed as an objective function. Equality and inequality restriction conditions are determined with respect to the standard recommendations and the literature. The center distance between the shafts is obtained through the optimization procedure imposed on the stage of the reducer which is subjected to the maximum load. The center distance after rounding is used next as a parameter in all variants of the reducer. The general formulation of the problem is presented for the considered engineering example. The numerical calculations are carried out for the specific data.
Źródło:: Journal of KONES; 2013, 20, 2; 213-219
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 14.

Tytuł:: Preliminary analysis of vibration signal test results registered at bench test stand of amv rosomak driving axis
Autorzy:: Walentynowicz, J.
Trawiński, G.
Dyga, G.
Polak, F.
Boruta, G.
Powiązania:: https://bibliotekanauki.pl/articles/242851.pdf
Data publikacji:: 2013
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: differential axle gears
test bench
vibration of elements
vibration analysis
Opis:: The methodology of measuring the vibration signal recorded on the casing of wheeled armoured vehicle ROSOMAK driving axis is presented. The study was performed on a test bench for different transmission conditions. A preliminary analysis of the frequency spectra vibration signals recorded. The test stand allows investigation of the differential axle gears under load similar to load during duty operation. It was possible by using the combustion engine and gearboxes and load transmission by using the dynamometer break. Have been described. Three methods of attaching acceleration sensors to differential gears: using screws, magnetic washers and probe handle. The results of comparisons of measurement results obtained using these methods. Finally, the sensors was mount by using the screw connections. Selected positions and points of temperature and vibration measures were described. Values of characteristic frequencies of differential axle gears vibration by moving the drive torque through these boxes were calculated. The spectra of the vibration signal determined during testing gearboxes were shown. It was state that of amplitude-frequency vibration spectra of signals recorded at selected points of differential axle gears casing are clearly visible characteristic frequencies but the vibration the bridge gear unit bridges distorted by vibration of the internal combustion engine and gearboxes. In a further stage of research should be included much larger number of the driving axis differentials investigated in various states of well-known technical conditions and should be lead accord to requirements of the active diagnostic experiment.
Źródło:: Journal of KONES; 2013, 20, 3; 419-426
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 15.

Tytuł:: Prototyping of bevel gears of aircraft power transmission
Prototypowanie stożkowej przekładni napędu lotniczego
Autorzy:: Budzik, G.
Markowski, T.
Sobolak, M.
Powiązania:: https://bibliotekanauki.pl/articles/243161.pdf
Data publikacji:: 2007
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: silnik spalinowy
systemy szybkiego prototypowania
stereolitografia
przekładnia stożkowa
combustion engine
rapid prototyping systems
stereolithography
bevel gears
Opis:: Artykuł przedstawia proces wykonania prototypu stożkowej przekładni napędu lotniczego. Szybkie wykonywanie prototypów przekładni o nietypowych zarysach zębów jest możliwe metodami "Rapid Prototyping". Jedną z najdokładniejszych metod szybkiego prototypowania jest stereolitografia, która polega na warstwowym utwardzaniu promieniem lasera fotopolimeru. Metoda ta pozwala zbudowanie modeli kół zębatych o dowolnych kształtach. Za pomocą urządzenia stereolitograficznego SLA-250 wykonane zostały modele kół zębatych przekładni stożkowej. Modele stereolitograficzne mogą służyć do wykonania odlewów. Istotną zaletą prototypów kół zębatych wykonanych z fotoutwardzalnej żywicy jest ich przezroczystość. Zaleta ta pozwala na obserwację chwilowego śladu styku kół zębatych przekładni. Chwilowy ślad styku jest jednym z podstawowych parametrów opisujących prawidłową pracę przekładni. W tym celu przygotowane zostały specjalne modele kół zębatych o zmniejszonej grubości ścianki. Taka budowa pozwoliła na bardziej precyzyjną obserwację śladu styku oraz na zmniejszenia kosztów wykonania modeli. Śledzenie dynamiczne chwilowego śladu styku jest niemożliwe do wykonania tradycyjnymi metodami badawczymi. Zastosowanie metod szybkiego prototypowania daje dobre rezultaty w procesie badań nowych prototypowych przekładni zębatych napędów lotniczych.
The article presents manufacturing process of bevel gears of aircraft power transmission. Rapid prototyping of gears with complex tooth forms is possible with the use of modern methods. One of such methods is the stereo-lithography, where a model is obtained as a result of resin curing with laser beam. This method allows creating gear model with arbitrary tooth form. Bevel gears was carried out by method of stereolitography on SLA 250 apparatus. Gear wheel prototypes were predestined for casting by method losing patterns. One of the best advantages of stereolitography model is its transparency. This advantage allow to observation instantaneous contact ellipses of gear. Instantaneous contact ellipses of gear is one of the most important parameters describe correctly work of gear. Research of instantaneous contact ellipses of gear requires special construction of model gear with thin wall. This construction allows costing reduction of prototype. Observation of instantaneous contact ellipses of gear is not possible by traditional research method. Rapid Prototyping method give good results in research process of new prototype of aircraft transmission gear.
Źródło:: Journal of KONES; 2007, 14, 2; 61-66
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Informacja

Wyszukujesz frazę "gears" wg kryterium: Temat

Źródło danych

Dostawca treści

Kolekcja

Rok wydania

Wydawca

Temat

Autor

Typ dokumentu

Język