Temat: engine diagnostics - Katalog OPAC zbiorów

Skocz do pozycji: 1.

Tytuł:: Performance monitoring and diagnostics of drive units of heavy armoured equipment
Autorzy:: Piątek, M.
Powiązania:: https://bibliotekanauki.pl/articles/244477.pdf
Data publikacji:: 2011
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: diagnostics
engine diagnostics
monitoring
combustion engine
Opis:: Transform the way of visual indication of vehicle traction parameters and the introduction of instinctive, concentrated in one place on-board device service is now possible following the development of microprocessor systems. Centralize system for diagnosis and control of the vehicle in a single desktop, such as the one described here, brings except cost savings also facilitation in addition to the driver and service. Indicators of vehicle speed, engine rpm and other parameters of traction, and the rates and indication of operation states used for additional equipment during the performance of the activities are concentrated in one place. Controls elements, such as circuit breakers, switches and buttons are placed within the areas of appropriate comfort are grouped into blocks that are functionally similar, which further facilitates their location and service. The modern, multi-track switches allow additional control versatility, while reducing their volume, which facilitates access to each of them. Panel equipped with universal input and output circuits and system software provides the flexibility to work with the latest generation of sensors and actuators, and components used previously as well. This allows the design of modern devices and simple upgrading of vehicles already in service.
Źródło:: Journal of KONES; 2011, 18, 1; 443-446
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 2.

Tytuł:: Influence of diesel engine fuelling with faee and FAME on stream spray and ignition delay angels
Autorzy:: Kruczyński, S. W.
Orliński, P.
Orliński, S.
Powiązania:: https://bibliotekanauki.pl/articles/245807.pdf
Data publikacji:: 2008
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: engine diagnostics
ecological fuels and environment
Opis:: The paper presents results of examinations concerning stream spray and ignition delay angles of AD3.152 engine fuelled with mineral fuel Ekodiesel Plus 50B and comparatively fuelled with vegetable fuels like methyl ester FAME and ethyl ester FAEE. Using fuels of different physicochemical properties to diesel engines requires high accuracy of diagnostic parameters measurements in order to learn differences in processes of injection and combustion. Necessity of fulfilling more and more strong standards, concerning emission of toxic components of exhaust gases, forces users of diesel engines to posses quick and precision methods of their technical state assessment and particularly of a combustion process and of injection equipment technical state. Analysis of the obtained diagrams of fuel pressure in the injection pipe enables to determine fuel pressure increase rate. The investigations were carried out on the basis of speed external characteristic using test stand equipped with system of quick-changeable pressures measurements. Stream spray of fuel and ignition delay angles influence combustion process what is connected with emission of toxic components to environment. However, decay period time tested fuels and their limits appeared smaller for vegetable fuels. Considering the results, it is therefore decide to continue our experiments.
Źródło:: Journal of KONES; 2008, 15, 3; 253-258
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 3.

Tytuł:: Application of the phase reproduction method to the analysis of an avionic event on board of the W-3 "Sokół" helicopter
Autorzy:: Kowalski, M.
Powiązania:: https://bibliotekanauki.pl/articles/244580.pdf
Data publikacji:: 2011
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: aircraft engine diagnostics
phase mapping of engine parameters
Opis:: This paper presents a new approach to the study of events/cases of the use of so-called air mapping phase. The examinations were carried out by means of the selective method on the basis of data for basic operational parameters acquired from the both driving units of the W-3 "Sokół" helicopter. The analysis covered quality of information received from the S2-3a on-board recorder of flight parameters, in particular its resolution and recording frequency. Then it was possible to plot waveforms for variation of the recorded parameters associated with operation of the helicopter engines and its rotor. The waveforms were used to determine the most important fragments suitable for detailed analysis of variations exercised by basic parameters and to check them against the Operation Manual for flights of the W-3 helicopter. The selected operation parameters were used for phase imaging (development of phase portraits), which served as the basis to assess dynamic properties of the parameters variations. The final component of the study consisted in discussion of the obtained results with presentation of conclusions. It is infeasible to monitor technical condition of the package joint between the transmission shaft and the PZL-10W aircraft. It is necessary to install additional sensors and gauges intended to improve accuracy and frequency of parameter readouts. Only sufficient amount of information shall enable application of the phase imaging method to efficient monitoring of technical and emergency operating conditions of aircraft engines.
Źródło:: Journal of KONES; 2011, 18, 1; 301-310
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 4.

Tytuł:: Diagnostics of internal combustion diesel engines operated in construction and mining
Autorzy:: Magdziak-Tokłowicz, M.
Miksiewicz, K.
Reksa, M.
Magdziak, D.
Powiązania:: https://bibliotekanauki.pl/articles/241683.pdf
Data publikacji:: 2015
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: engine diagnostics
construction machines
mining machinery vehicle operation
SI engine
Opis:: Mining machinery and equipment belong to the group of special machines working in extreme conditions. Mining machines are used in difficult conditions such as limited supplies of fresh air, heat from the rock, in places with high humidity and heavy dust. In other specifics related to the extraction process is brine, harmful compounds such as sulphur dioxide, or rock debris raining down. The machines are operated in continuous mode, the clock. Working in mining conditions machines are exposed to frequent breakdowns and malfunctions. Identifying of failure diesel engines can be cumbersome in these conditions and time-consuming, leading to longer downtime, thereby reducing operating efficiency and increased cost. Therefore, in the paper was a review and analysis methods for the diagnosis of internal combustion diesel engines used in machines built and used to power machines in underground mining. On the basis of diagnostic testing was performed analysis of cases occurring malfunctions and failures.
Źródło:: Journal of KONES; 2015, 22, 4; 191-199
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 5.

Tytuł:: Influence of the composition of microemulsiye fuel hydrocarbon-ester-ethanol on chosen parameters of diesel engines combustion process
Wpływ składu paliwa mikroemulsyjnego węglowodorowo-estrowo-etanolowego na wybrane parametry procesu spalania w silniku o zapłonie samoczynnym
Autorzy:: Kruczyński, S. W.
Orliński, P.
Orliński, S.
Powiązania:: https://bibliotekanauki.pl/articles/242093.pdf
Data publikacji:: 2009
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: diagnostyka silnika
paliwa ekologiczne i środowisko
engine diagnostics
alternative fuels and environment
Opis:: The paper presents investigation results of the PERKINS 1100 engine. The engine was supplied with a microemulsive fuel mixture: hydrocarbon-ester-ethanol and comparatively with hydrocarbon, low-sulphur EKODIESEL PLUS 5 OB Diesel fuel, as well as the methyl ester of rape oil acids FAME (100%). Usingfuels with different physical and chemical properties for compression-ignition engines requires high accuracy of diagnostic parameter measurements in order to examine differences in processes of injection and combustion. Necessity of fulfilling more and more strict standards concerning emission of toxic components ofexhaust gases forces technical staff servicing Diesel engines to possess quick and precise methods which assess their technical state, particularly combustion process and state of injection equipment. Analysis of the experimentally obtained diagrams of fuel pressure in the injection line andneedle lift enables to determine injection angle. Experimentally obtained indicating diagrams of the engine were used later on to make relative heat release speed diagrams during combustion. In the paper it was proven, that the art of fuel with different physical and chemical properties has a significant influence on the fuel injection process and its burning, duration of injection time, fuel speed out of the spray er as well as the time of stream lasting and quality of its disintegration into drops. This influence affects fuel consumption, energy parameter's, exhaust emission and acoustic signal of an engine.
W referacie przedstawiono wyniki badań silnika PERKINS 1100. Silnik zasilany był mieszaniną paliwa mikroemulsyjnego: węglowodorowo-estrowo-etanolowego oraz porównawczo węglowodorowym, niskosiarkowym olejem napędowym EKODIESEL PLUS 50B i estrem metylowym kwasów oleju rzepakowego FAMĘ (100%). Zastosowanie paliw o różnych właściwościach fizykochemicznych do silników wysokoprężnych wymaga dużych dokładności pomiarów parametrów diagnostycznych celem poznania występujących różnic w procesach wtrysku i spalania. Spełnianie coraz bardziej rygorystycznych norm emisji składników toksycznych spalin zmusza personel techniczny serwisujący silniki spalinowe o zapłonie samoczynnym do posiadania szybkich i precyzyjnych metod oceny ich stanu technicznego, szczególnie procesu spalania oraz stanu aparatury wtryskowej. Analiza eksperymentalnie wyznaczonych wykresów przebiegu ciśnienia paliwa w przewodzie wtryskowym i wzniosu iglicy wtryskiwacza umożliwia wyznaczenie kąta wyprzedzenia wtrysku. Wyznaczanie charakterystyk względnej prędkości wydzielania się ciepła podczas procesu spalania przeprowadzono w oparciu o eksperymentalnie sporządzone wykresy indykatorowe silnika. W referacie wykazano, że rodzaj paliwa o różnych właściwościach fizykochemicznych ma istotny wpływ na proces wtrysku paliwa i jego spalanie, czas trwania wtrysku, prędkość wypływu paliwa z rozpylacza oraz czas trwania strugi paliwa i jakość jej rozpadu na krople. Wpływ ten przejawia się w oddziaływaniu na zużycie paliwa, na wskaźniki energetyczne, emisję toksycznych składników ze spalinami oraz emisję akustyczną.
Źródło:: Journal of KONES; 2009, 16, 3; 195-201
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 6.

Tytuł:: Analysis of diagnostic utility of instantaneous angular speed fluctuation of diesel engine crankshaft
Autorzy:: Dereszewski, M.
Charchalis, A.
Polanowski, S.
Powiązania:: https://bibliotekanauki.pl/articles/244646.pdf
Data publikacji:: 2011
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: two-stroke diesel engine diagnostics
diagnostics of combustion process
angular speed variation
angular acceleration
moving approximation
Opis:: Frequent crew rotation, a shorthand, and various levels of technical crew skills, are the facts with the ship-owners has to cope very often. Having the proper level of engine exploitation as a main objective is necessary to implement a constant engine monitoring system, in order to obtain quick and reliable diagnostic information. One cannot omit the financial aspect of monitoring system implementation, created by its price and costs of service. In this paper, the analysis of diagnostic utility of the signal deriving from a propulsion shaft fluctuation during its one revolution is presented. The angular speed of the shaft was measured using a laser sensor of torque meter ETNP-10. Diagnostic utility validation has been verified on a basis of combustion quality, in cylinders of two-stroke, turbocharged Marine Diesel Engine. Test was carried out on board of a container vessel during its sea passage. In order to evaluate the effectiveness of the method, the crew simulated engine’s malfunction by fuel injection cut-off in various cylinders (only one in the same time).The interference signals decomposition was carried out using the method of synchronous averaging and moving approximation with polynomial of 3rd exponent.
Źródło:: Journal of KONES; 2011, 18, 1; 123-128
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 7.

Tytuł:: Diagnostics of modern diesel engines on the example of Fiat 1.3 JTD MultiJet engine
Autorzy:: Prajwowski, K.
Powiązania:: https://bibliotekanauki.pl/articles/245043.pdf
Data publikacji:: 2016
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: engine diagnostics
sensor system
actuator system
oscilloscope signal waveforms
diagnostyka silnika
system czujników
system siłownika
Opis:: Initially, electronic components replaced the mechanical ones to make various systems more reliable. Mechanical control systems, due to the wear of movable parts and imprecise adjustment, were affected by large errors, which are not shown by electronic circuits operating according to constant set-points. Then, a sharp increase in electronisation was associated with the tightening of exhaust gas emission regulations. Progress in some cases is forced by environmental protection, in other ones by market competition. Modern motor vehicles, slow moving vehicles, military vehicles, etc., are the technical systems being constructed using the latest developments in many fields of science, first of all in mechanics and machine engineering, electrical engineering, electronics, information technology, and chemistry. The rapid development of electronics has led to an increase in the number of electronic components in motor vehicles in all systems, starting with an engine, which has been modified first, to comfort and infotainment systems. The paper presents example measurements of sensors and actuators of an engine with Common Rail fuel supply system on the example of Fiat 1.3 JTD MultiJet engine. The measurements were made using various diagnostic instruments, such as a diagnostic tester, a multimeter or an oscilloscope. Sometimes, the reading of error codes with a diagnostic tester itself is not enough and it is necessary to check the signal waveform with an oscilloscope, which has been presented in this paper.
Źródło:: Journal of KONES; 2016, 23, 3; 403-409
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 8.

Tytuł:: Application of vibration signals in the diagnosis of combustion engines - exploitation practices
Autorzy:: Stanik, Z.
Warczek, J.
Powiązania:: https://bibliotekanauki.pl/articles/245993.pdf
Data publikacji:: 2011
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: vibration diagnostics
combustion engine
Opis:: Changes in operating properties of the internal combustion engine, for various reasons, may manifest themselves with similar symptoms. An example is the drop in engine power, which may be caused by malfunctioning of the system such as power supply, or excessive wear geometric kinematic pairs as the piston-crankshaft. Identification of the causes of malfunction is the basis for carrying out corrective action. In practice, the workshop frequent disability are different manifestations of the drive units having identical symptoms. An alternative to iterative repair methods is the introduction of diagnostic tools that will help identify causes of failure, without having to remove the individual motor units. These provisions comply with the method of vibration analysis. The vibration signals provide information about the technical condition of the object. The paper presents examples of applying the methods of vibration in the identification of changes in the technical condition of the engine, which confirm their usefulness in identifying sources of failure. During the process of investigations, time courses of vibration accelerations were recorded with piezoelectric transducer mounted at half height of the first cylinder, perpendicular to its axis. The worked out method is based on vibration signals recorded at engine operation. The dominant amplitude components of time courses are strongly connected with air- fuel mixture ignition as well as with kinetic pairs of the engine.
Źródło:: Journal of KONES; 2011, 18, 3; 405-412
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 9.

Tytuł:: Evaluation of the technical condition of the powerpack for AMV Rosomak on the dynamometer test stand
Autorzy:: Karczewski, M.
Szczęch, L.
Walentynowicz, J.
Powiązania:: https://bibliotekanauki.pl/articles/245173.pdf
Data publikacji:: 2013
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: combustion engine
diagnostics
powerpack
Opis:: The paper describes standard methods of diagnosing of the AMV (the Rosomak) drive unit technical condition used in daily operation in military missions in Afghanistan. Main rule of the method of diagnosing of the vehicle technical condition is using an external diagnosing system. This system is connected to the vehicle at the time of checking of operation of the powertrain control system configuration of the drive unit to permit the diagnosis, including examination of the engine and gearbox. Enhanced diagnostic system is connected to the OBD system with using standard PC computer with appropriate software. Stored examples of the results of the operation of such system are included in the paper. Measuring was led on a dynamometer stand to perform research of a propulsion unit in work condition. Measurements of the engine parameters were led in steady state and transient engine operating conditions. Unsteady-state condition studies were carried out using the method of free-range acceleration of the engine. Pointed out the merits of the development of this type of study due to the perceived potential and usefulness of the results obtained. The results of studies carried out by various methods and assess the current condition of the engine and the entire powertrain were compared.
Źródło:: Journal of KONES; 2013, 20, 3; 221-228
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 10.

Tytuł:: Diagnostics and analysis of jet engine malfunctions
Autorzy:: Rojewski, A.
Bartoszewicz, J.
Powiązania:: https://bibliotekanauki.pl/articles/242847.pdf
Data publikacji:: 2018
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: jet engine
aircraft
diagnostics
safety
Opis:: The article describes emergency situations occurring in the propulsion system of an aircraft with the jet engine used in Poland on planes such as MiG-29 or F-16. The article also presents statistics of polish aircrafts damage over the years. Due to the technological progress of turbine engines used in fighter aircraft, the authors decided to discuss the issue of monitoring emergency states in this study. In particular, efforts have been made to ensure that damage to the aircraft engine can be prevented by monitoring its operation with the equipment available on the aircraft. Counteracting phenomena that occur in the jet engine can lead to permanent damage; can lead to an increase in the safety of the pilot and the local population, but also to a reduction of costs. The authors also decided to se the threats that occur during take-off and landing, and the flight when they land outside the plane. Jet engines are almost reliable and most common cause of engine damages as the analysis shows are foreign bodies, particularly dangerous for a turbine engine on or near the runway, as well as birds, which provides to mechanical damage of engine. Securing the airport against foreign objects on the runway is one of the most important tasks of ground staff.
Źródło:: Journal of KONES; 2018, 25, 2; 313-318
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 11.

Tytuł:: Vibro-acoustic methods in marine diesel engines diagnostics
Autorzy:: Lus, T.
Powiązania:: https://bibliotekanauki.pl/articles/245521.pdf
Data publikacji:: 2011
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: marine diesel engine
turbocharger
diagnostics
vibration
Opis:: Vibro-acoustic diagnostic methods which are used on marine high-speed diesel engines with turbochargers are presented in this paper. Vibration and acoustic signals generated by turbochargers need different signal processing methods to be effective and faultless in turbochargers diagnostics. Diagnostic methods which based on vibration and acoustic signals analysis are sensitive on engine load and speed changes. Methods presented in this paper based on vibration and acoustic signals processing in time and frequency domain. Using this methods checking technical condition of the turbochargers and its rotors and bearings without stopping the engine and dismantling it is possible. Examples of radial-flow rotor turbine overgrown by carbon soot and axial-flow rotor turbine without turbine blades, sound intensity level of turbocharger and acoustic spectrum of turbocharger in octave mode acoustic spectrum of turbocharger in octave mode for two different technical conditions, acoustic and vibration signal spectrum of the turbocharger, vibration acceleration amplitude of first harmonic for three turbochargers, values of harmonic vibrations of accelerations equivalent of turbine blades number, amplitude of vibrations accelerations in frequency domain for turbocharger in good and bad technical conditions are presented in the paper.
Źródło:: Journal of KONES; 2011, 18, 3; 203-210
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 12.

Tytuł:: Marine diesel engine valve gear mechanism diagnostics problems
Autorzy:: Lus, T.
Powiązania:: https://bibliotekanauki.pl/articles/245681.pdf
Data publikacji:: 2009
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: marine diesel engine
diagnostics
valve gear
Opis:: Marine diesel engines have changed their construction last years because of electronic control implementation in fuelling process. Electronic control implementation could be also important in valve gear mechanism which is main part of the engine gas es exchange system. In this paper problems connected with of valve gear mechanisms operation and diagnostics have been presented. the diagnostic methods and processes which could impact diagnostic process will be shown together with examples from test bed and real vessels. diagnostic methods which based on vibration signals analysis are sensitive on engine load and speed change. separate engine cylinder 's loads generale differences in so called "dynamic valve gear diagrams " which will be shown for some marine engine types. opening and closing of inlet and exhaust valves generale vibration signals in entire engine structure. There are some tools available in signal analysis which gives opportunity to trace changes in signal patterns in real time monitoring systems. special diagnostic method based on vibration signal analysis worked out in the polish naval academy, gives opportunity to change engine maintenance philosophy from scheduled planed maintenance system to condition based maintenance system without fear about real operating engine conditions.
Źródło:: Journal of KONES; 2009, 16, 4; 287-292
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 13.

Tytuł:: Measurement methods for determining the parameters of injectors in internal combustion engines
Autorzy:: Grzesik, N.
Zaremba, R.
Powiązania:: https://bibliotekanauki.pl/articles/242709.pdf
Data publikacji:: 2014
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: engine
fuel injectors
fuel spray diagnostics
Opis:: The general principle of internal combustion engine operation has not changed since the engine structure was first developed. However, the system of blending the air and fuel into a mixture with the parameters ensuring effective fuel combustion processes has been evolving over the years. In the simplest engines, the fuel-air mixture was produced in the inlet manifold i.e. in the carburettor systems while the more advanced motors were equipped with the system of Single Point Injection (SPI), and further on with the Multi-Point Injection (MP!) where each of the cylinders has its own individual injector. The Multi-Point Injection (MPI) system has evolved into a Gasoline Direct Injection (GDI) system where the injector sprays fuel directly into the combustion chambers. Presently, due to the restrictive regulations governing the issues of exhaust gases ' composition and emissions, manufacturers of the engines used mainly in the automotive industry apply the system of multi-point indirect injection to the intake manifold or the system of direct fuel injection to the combustion chambers. In both systems, these are the injectors dosing precise amounts offuel, which are the most important, and the most accurate elements of the system. The article presents the injectors' macro- and microscopic parameters used for the purpose of the fuel dispersants' technical condition and performance assessment. Additionally, it refers to direct and optical methods of microscopic parameters measurement enabling fuel spray diagnostics.
Źródło:: Journal of KONES; 2014, 21, 4; 153-159
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 14.

Tytuł:: Asymmetry increase in the course of compression pressure as a measure of obstruction in indicating channel
Autorzy:: Łutowicz, M.
Powiązania:: https://bibliotekanauki.pl/articles/242408.pdf
Data publikacji:: 2016
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: marine diesel engine
indicated
indicated channel
diagnostics
Opis:: Indicating process of large combustion engines for both marine and industrial applications is performed using the indicating channels with valves. The impact of these channels on the values of parameters obtained from engine’s indication is significant. In previous studies, it had been shown that during exploitation accidental degradation of the indicating channels occurs. Carbon deposits, which appear in the channels, are limiting their patency. Leaks in channels connections are also appeared. Disregarded state of degradation of indicating channels will change the image of indicated pressure course, different for each cylinder of the engine. When cylinders are indicated using commercial instruments, the status of the channel is not in any way taken into account. At one gas compressing station in Poland, which has compressor diagnostic system, developed by the author, with stationary indicator, inverted IIR filter has been used. This filter is used to adjust the recorded waveforms of indicated pressure on motor-compressors GMVH type, and the filter coefficient is chosen to offset the associated throttling signal delay. Information about the delay of the signal is missing, however, in the case of popular portable indicators that do not use tags from crankshaft position. The paper presents a method for assessing the state of the indicating channel, based on the asymmetry measurement of compression course obtained after cut-off the fuel supply to the tested cylinder. The study model shows that leakage from the combustion chamber, interference in cooling and other defects cause only slight and predictable disruption of symmetry. The analysis of compression pressure course (without fuel delivery) immediately prior to each cylinder indication, in the case of positive verification, increases the reliability of diagnosis. In the case of negative verification, measure of the asymmetry could be the basis for the adjustment of acquired pressure waveforms and achieved from them parameters.
Źródło:: Journal of KONES; 2016, 23, 3; 311-316
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 15.

Tytuł:: Reverse IIR filter as a tool for cylinder indicating channel patency impact correction on measured cylinder pressure waveform
Autorzy:: Łutowicz, M.
Powiązania:: https://bibliotekanauki.pl/articles/242647.pdf
Data publikacji:: 2013
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: marine diesel engine
indicated
diagnostics
indicated channel
Opis:: Indicating of large marine and industrial diesel engines is made with using indicating channels in cylinder head with valves. The impact of these channels on the value of the parameters obtained from indicating is significant. However, indicating is commonly used for comparative tests assuming that this error is the same on all cylinders of the same engine in identical conditions. As a result of operation especially in cylinders with irregular combustion process the coke occurs in the channel limits its patency. It causes changes in the image of indicated pressure. In such a situation defined parameters are subject of considerable random error. In the earlier studies on the engine Sulzer type 6AL20/24 cylinder channel failure was simulated and channel chocking symptom was observed as apparent TDC shift relative to a reference mark connected with the shaft. As part of ongoing studies attempt to reconstruct distorted pressure curve by chocked indicating channel was made. It is assumed that the channel with the valve is only connection between throttling element in the form of a channel with the much greater volume of the valve. Such a structure was modeled as IIR filter. For this type of filter, there is an unequivocal inverse transformation, which, at least in theory gives possibility to reconstruct the distorted pressure waveform. The reconstruction was carried out by selection of the filter coefficients so as to eliminate the shift of TDC. In practice it turned out that the reconstruction is not perfect. All obtained pressure waveforms are slightly noisy and distorted in the first phase of expansion. Despite this, there was a significant reduction in errors of some parameters determined from the reconstructed pressure waveform.
Źródło:: Journal of KONES; 2013, 20, 2; 253-259
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Informacja

Wyszukujesz frazę "engine diagnostics" wg kryterium: Temat

Źródło danych

Dostawca treści

Kolekcja

Rok wydania

Wydawca

Temat

Autor

Typ dokumentu

Język