Temat: coolant - Katalog OPAC zbiorów

Skocz do pozycji: 1.

Tytuł:: Influence of speed and load on the engine temperature at an elevated temperature cooling fluid
Autorzy:: Krakowski, R.
Powiązania:: https://bibliotekanauki.pl/articles/243666.pdf
Data publikacji:: 2013
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: combustion engines
cooling system
coolant temperature
Opis:: In this article has been found that the most popular and widely used method of cooling is liquid cooling, which ensures uniformity of temperature around the combustion chamber and easy acquisition and transfer of heat, although the properties of water are limited by maximum temperature of the coolant. Preliminary scientific research of such a system indicates the possibility of increasing overall efficiency and reducing toxic components in exhaust gases at low engine loads when the engine exhaust temperature of the classic system is too low for efficient catalytic action. This paper presents the dynamometer test stand designed and built using original components of diesel engine 4CT90 production of WSW "ANDORIA" SA. Presented system was designed for the four cylinder with indirect fuel injection system. Research was made on the engine dynamometer stand, which was equipped with standard measure devices (measures: speed, torque, temperatures, flows) and exhaust gas analysers. The temperature of this liquid was increased to the higher level than temperature of boiling water in normal conditions. Overpressure inside the cooling system was limited to 0.3 MPa, the temperature inside the cooling system was increased to 115–120°C. During the test, the cooling system was filled with coolant at 90%. The selected results of investigations of the cooling system for the combustion engine working with higher temperature of the cooling liquid, where the influence of speed and load on the engine temperature were presented.
Źródło:: Journal of KONES; 2013, 20, 4; 185-192
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 2.

Tytuł:: Influence of the coolant temperature on emission of toxic compound and engine work parameters
Autorzy:: Walentynowicz, J.
Powiązania:: https://bibliotekanauki.pl/articles/242404.pdf
Data publikacji:: 2009
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: combustion engines
cooling systems
higher coolant temperature
Opis:: The selected results of investigations of the cooling system for the combustion engine working with higher temperature of the cooling liquid were presented. The temperature of this liquid were increased to the temperature of boiling water, as a basic compound of the cooling liquid. This system was designed for the four cylinder diesel engine 4CT90 with indirect fuel injection system. Investigation was realized on the dynamometer stand equipped with standard measure devices (measures: speed, torque, temperatures, flows) and exhaust gas analyzers. The speed and torque engine characteristics were determined. The over pressure inside cooling system was limited up to 0.07 MPa regarding lower pressure structural integrity of the standard units of this system. Intensity of the cooling, protective against too higher pressure, were changed by switching small and full liquid circulation, and one or two fans of the cooler. temperature inside cooling system was increased up to 110 centigrade. Results ofincreasing of the cooler temperature were lower frictions of unburned products of combustion process (CO and HC) in the exhaust gas (up to 50%) in low torque and low engine speed. This is area when catalytic reactor does not work because too low is exhaust gas temperature. It wasfound that engine economy was increased to 7% in maocimum load and high engine speed.
Źródło:: Journal of KONES; 2009, 16, 1; 583-590
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 3.

Tytuł:: Internal combustion engine cooling system with elevated coolant temperature research on the model test stand
Autorzy:: Krakowski, R.
Powiązania:: https://bibliotekanauki.pl/articles/242843.pdf
Data publikacji:: 2013
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: combustion engines
engine cooling
test stand
coolant temperature
Opis:: In the paper a model test stand designed and built using original components of diesel engine 4CT90 is presented. The stand provides working conditions as close as possible to the exploitation conditions of the engine cooling system. This applies both to the intensity of heat inside the cylinders of the engine, the temperature uniformity along the cylinder axis, as well as variable-speed water pump. Research carried out on the model stand were aimed at checking the operation of the cooling intensity control with varying levels of filling of the cooling system and develop a control method of the cooling system before testing on the dynamometer stand. In addition, system operation at elevated cooling liquid pressure for the possibility of obtaining the elevated coolant temperature were checked. The influence of working conditions on the level of the temperature was also analysed. In this paper, the characteristics selected for two values of pressure, for 0.15 MPa and 0.2 MPa, and for two different values of the degree of filling of the cooling liquid were presented. During the warming-up and continuous heating of the cylinder and the cylinder head by electrical heaters, temperature and overpressure courses before and after the liquid radiator, temperature before the inlet and outlet of the liquid from the engine and the temperature at selected points inside the engine water jacket are designated. The results of measurements of the coolant pump flow at different speed water pump were also presented in this paper.
Źródło:: Journal of KONES; 2013, 20, 4; 177-183
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 4.

Tytuł:: Intercooler for extremely low temperatures of charging
Autorzy:: Toporcer, E.
Tučnik, P.
Cisek, J.
Powiązania:: https://bibliotekanauki.pl/articles/246271.pdf
Data publikacji:: 2010
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: intercooler
simulation
charge air flow
coolant flow
cooling fins
Opis:: The paper deals with the optimization of the charge air intercooler of the turbocharged internal combustion engine with the focus on the extremely low temperatures of charge air. The software Fluent is used for the numerical simulation (CFD - Computational Fluid Dynamics) of the charge air flow. The 3 D space geometrical model of the charge air intercooler is created in the CAD (Computer Aided Design) software CATIA. The model is simplifled according to the requirements of the computational mesh creation and numerical simulation. The model is then exported as the iges file and this file is subsequently imported into the preprocessor Gambit. The imported model is repaired and a suitable mesh is then created according to the computational means properties. The last step is the definition of the types of boundary conditions. The needed types of boundary conditions are applied to the single surfaces and volumes. The completed computational mesh is then exported from Gambit and imported into the CFD software Fluent for numerical simulation. The needed values of parameters are used for the calculation definition and the simulation is started. The simulation results show the charge air flow in the charge air cooler and the places with the maximum values of turbulences can be found and this information can be the input for the optimization design of the mentioned cooler.
Źródło:: Journal of KONES; 2010, 17, 4; 529-536
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 5.

Tytuł:: Possibilities of lowering coolant pump driving power in car engines
Możliwości zmniejszenia mocy potrzebnej do napędu pompy cieczy chłodzącej silnika samochodowego
Autorzy:: Kneba, Z.
Powiązania:: https://bibliotekanauki.pl/articles/247524.pdf
Data publikacji:: 2008
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: układ chłodzenia silnika
pompa cieczy chłodzącej
engine cooling system
coolant pump
Opis:: W artykule opisano wybrane problemy napędu pompy cieczy chłodzącej silnika samochodowego. Celem prezentowanego artykułu jest określenie możliwości zmniejszenia mocy potrzebnej do napędu pompy cieczy chłodzącej. W klasycznym i dzisiaj najbardziej rozpowszechnionym układzie chłodzenia cieczą silników samochodowych pompa cieczy chłodzącej jest napędzana przez przekładnię pasową od wału korbowego silnika. W tradycyjnych układach chłodzenia wydajność pompy jest zbyt duża przy wysokich prędkościach obrotowych silnika. Zmniejszenie prędkości obrotowej wirnika pompy jest korzystne ze względu na mniejszy pobór mocy do napędu jak i na unikanie kawitacji przy dużych prędkościach przepływu cieczy. Pełną niezależność wydajności pompy od prędkości obrotowej wału korbowego można osiągnąć tylko stosując dodatkowy silnik elektryczny czy hydrauliczny do napędu pompy. Takie rozwiązania pojawiły się 5 lat temu w silnikach samochodów osobowych a były i są powszechnie stosowane w silnikach okrętowych. Dla zapewnienia bezawaryjnej pracy konieczne jest sterowanie wydajnością pompy w funkcji wybranej łatwo mierzalnej temperatury części silnika na przykład tulei cylindrowej. Mierząc temperaturę tulei cylindrowych autor proponuje obniżenie wydajności pompy dla zmniejszenia mocy potrzebnej do jej napędu. Wśród różnych koncepcji technicznej realizacji zmniejszenia mocy potrzebnej do napędu pompy korzystnie wyróżnia się napęd niezależny z silnikiem elektrycznym. Jest to rozwiązanie najbardziej kosztowne.
Some engine coolant pump drive problems are described in the paper. Presented aim of article is the presentation of possibilities to the decrease of the necessary power to drive the liquid cooling pump. In the classical and today most widespread in the car engines liquid cooling system, the pump of cooling liquid is driven through rubber belt from engine crankshaft. Due to recent applications of the new generation cooling systems, many simulations and engine measurements have to be done. Coolant pump velocity is too big at high engine speeds in traditional cooling systems. The speed decrease of the circulation pump rotor is advantageous, considering the smaller power consumption to pump drive and on the avoidance of cavitation related with the large velocities of liquid flow. The full independence of the pump output from of crankshaft rotational speed is only possible to achieve by applying the additional electric engine or hydraulic drive to power the pump. Such solutions appeared 5 years ago in the personal vehicle engines, but generally they were and are currently used in ship's engines only. For the assurance of a failure-free engine performance, the necessary task is the control of pump output in the function of a selected easily mensurable temperature of the engine parts, for example cylinder liner. Having knowledge of cylinder liner extreme temperature the author proposed lowering coolant pump rotational speed. Among different ideas of a technical realization of the decrease of necessary power to drive the coolant pump, the advantageous and favoured one is the independent pump propulsion with electric engine. This solution is the most expensive one.
Źródło:: Journal of KONES; 2008, 15, 3; 239-244
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Informacja

Wyszukujesz frazę "coolant" wg kryterium: Temat

Źródło danych

Dostawca treści

Kolekcja

Rok wydania

Wydawca

Temat

Autor

Typ dokumentu

Język