Temat: bench - Katalog OPAC zbiorów

Skocz do pozycji: 1.

Tytuł:: Analysis of the procedure of evaluation of the technical condition of a high-pressure common rail fuel pump using a test bed
Autorzy:: Bor, M.
Idzior, M.
Karpiuk, W.
Smolec, R.
Powiązania:: https://bibliotekanauki.pl/articles/243763.pdf
Data publikacji:: 2018
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: common rail
test bench
diagnostic
Opis:: Piston displacement pumps use in common rail fuel injection systems generates very high pressure, reaching even 300 MPa. Maintaining such a high pressure is possible thanks to very precise machining resulting in as little clearance between the piston-cylinder assemblies. Due to very high forces operating in the systems and relatively unfavourable lubrication conditions resulting from using fuel as lubricants, the pumps are subject to wear and consequently lose their operating parameters. The high cost of production of the pumps, resulting from their technological advancement, forced their manufacturers to introduce technologies for diagnosing and regenerating them. The diagnostics consists in removing the pump from the engine and having it verified using a test bed. The first stage consists of evaluating the pump’s flow at null pressure; follow by evaluation of its maximal delivery for the pressure of 100 MPa. The obtained values are compared to the values achieved by a new pump. The effect of negative evaluation on a test bed is the disassembly of the pump, verification of the condition of its parts and replacement of the damaged elements. The authors examined new and used pumps on a tested, aiming to determine the characteristics of delivery of a pump for various pressures. The objective of the research was to identify the actual points in the pump’s operation at which the delivery drops the most due to the wear. The highest difference in delivery was found to exist for the maximal compression pressure. The obtained results were analysed and the possibility of changing the pump diagnostics procedure with the use of a test bed was determined.
Źródło:: Journal of KONES; 2018, 25, 3; 65-70
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 2.

Tytuł:: The new stand for aging of biocomponents and biofuels process testing at relatively short time
Autorzy:: Dzięgielewski, W.
Kaźmierczak, U.
Kulczycki, A.
Okniński, R.
Stefanowicz, P.
Powiązania:: https://bibliotekanauki.pl/articles/949517.pdf
Data publikacji:: 2016
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: biofuels
biocomponents
ageing process
test bench
method of measuring
Opis:: In the paper, the concept of a model bench for accelerated ageing of bio-components and biofuels was presented. It is used to simulate the ageing process of biofuels and components of vegetable or animal origin, taking place during storage in the storage tanks. The construction of the bench’s essential elements and its equipment were designed and implemented in such a way as to mostly reflect actual storage conditions in large capacity tanks. An additional and unprecedented function of the bench includes the possibility to simulate the product transport conditions. Furthermore, a method of the test, with the use of simultaneously performed traditional tests on the physical and chemical properties monitored in the process of storage was presented. An analysis of the relation between values of the parameters obtained with different methods (on the model bench and under laboratory conditions) was conducted. In addition, their usefulness to assess the impact of logistic processes on the product quality was presented. In the paper, the results of the work executed within the framework of the project “Development of a prototype of the monitoring system the ageing rate and degree of bio-components and biofuels” within the Program Innovative Economy Operational Programme, Measure 1.4. “Support for goal-oriented projects” were used.
Źródło:: Journal of KONES; 2016, 23, 2; 105-112
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 3.

Tytuł:: The effect of diesel fuel mixture and camelina oil ester on the process of fuel injection in traction engine
Autorzy:: Orliński, S.
Orliński, P.
Wojs, M. K.
Powiązania:: https://bibliotekanauki.pl/articles/246900.pdf
Data publikacji:: 2013
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: fuel plant
process of injection
engine test bench diesel engine
Opis:: This paper presents the results of comparative research on basic physical and chemical properties of pure diesel fuel and two types’ mixtures of Camelina oil ester (Camelina oil ester content of the mixture was 10% and 15%) and diesel fuel. Application of these mixtures has different physicochemical properties to power supply diesel engine, made it possible to detect existing differences in the injection process (pumping and spraying). The analysis of the injection process has been defined through experimental graphs of the fuel pressure in injection line and registered height of the needle injector. With the knowledge of these two fast-changing engine parameters and loadvelocity conditions, there were calculated: fuel flow speed from nozzle, range and fuel spray disintegration time and the average critical diameter of the droplets. In the final part of the article it was shown, that the fuel with different physicochemical properties has a significant impact on the injection process. There were also made a comparative assessment of the suitability test compounds for use in service.
Źródło:: Journal of KONES; 2013, 20, 1; 255-261
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 4.

Tytuł:: Preliminary analysis of vibration signal test results registered at bench test stand of amv rosomak driving axis
Autorzy:: Walentynowicz, J.
Trawiński, G.
Dyga, G.
Polak, F.
Boruta, G.
Powiązania:: https://bibliotekanauki.pl/articles/242851.pdf
Data publikacji:: 2013
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: differential axle gears
test bench
vibration of elements
vibration analysis
Opis:: The methodology of measuring the vibration signal recorded on the casing of wheeled armoured vehicle ROSOMAK driving axis is presented. The study was performed on a test bench for different transmission conditions. A preliminary analysis of the frequency spectra vibration signals recorded. The test stand allows investigation of the differential axle gears under load similar to load during duty operation. It was possible by using the combustion engine and gearboxes and load transmission by using the dynamometer break. Have been described. Three methods of attaching acceleration sensors to differential gears: using screws, magnetic washers and probe handle. The results of comparisons of measurement results obtained using these methods. Finally, the sensors was mount by using the screw connections. Selected positions and points of temperature and vibration measures were described. Values of characteristic frequencies of differential axle gears vibration by moving the drive torque through these boxes were calculated. The spectra of the vibration signal determined during testing gearboxes were shown. It was state that of amplitude-frequency vibration spectra of signals recorded at selected points of differential axle gears casing are clearly visible characteristic frequencies but the vibration the bridge gear unit bridges distorted by vibration of the internal combustion engine and gearboxes. In a further stage of research should be included much larger number of the driving axis differentials investigated in various states of well-known technical conditions and should be lead accord to requirements of the active diagnostic experiment.
Źródło:: Journal of KONES; 2013, 20, 3; 419-426
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 5.

Tytuł:: Small gas turbine GTM-120 bench testing with emission measurements
Autorzy:: Chmielewski, M.
Gieras, M.
Powiązania:: https://bibliotekanauki.pl/articles/245082.pdf
Data publikacji:: 2015
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: small gas turbine
emission measurements
combustion engines
bench testing
engine performance
Opis:: The aim of this paper is to provide comprehensive bench testing results for small gas turbine engine with a strong focus on the flue gas emission measurements. After a short overview of small gas turbine GTM-120 design and working principles, the test bench developed at the Institute of Heat Engineering at the Warsaw University of Technology is presented. Capability and accuracy of the sensors used in test bench are discussed in detail. Data acquisition software based on LabVIEW is also presented. Five separate sections representing successive engine stations have been distinguished. Experimental set of data of pressure and temperature on all of the stations is presented for the whole range of engine rotational speeds. Additionally, the engine thrust and fuel consumption data is provided. Special attention is given to the engine NOx and CO content in the engine exhaust gas, since turbine engine emissions are of great concern due to their adverse impact on natural environment. Experimental results are followed by the engine cycle parametric study for real engine thermodynamic cycle. Finally, future work plans regarding variable combustor chamber utilization for emission reduction from small gas turbine are discussed.
Źródło:: Journal of KONES; 2015, 22, 1; 47-54
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 6.

Tytuł:: Vibration isolators test bench
Autorzy:: Pobedin, A.
Kosov, O.
Shekhovtsov, K.
Powiązania:: https://bibliotekanauki.pl/articles/244493.pdf
Data publikacji:: 2011
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: vibration isolator
test bench
vehicle cabin
suspension
testing
elastic and damping characteristic
Opis:: The description of the scheme and design of the test bench for testing vibration isolators intended for use in the vehicle's cabin suspension. Test bench construction allows to implement a wide range of loadings on vibration isolator of the vehicle cabin, to investigate the impact of the loading's arm changing and to perform analysis of the vibration isolator’s elastic and damping characteristics changing impact on cushioning quality. Variant of the test bench construction modernization, which can allow applying typical exploitation loads, which include vertical and lateral components, is described. We propose a scheme of forced oscillations excitation system on the test bench by cam-eccentric mechanism. It includes a DC motor with stepless frequency regulation and with cams of different shape on its shaft, which affect the contact surface of the test bench's vertical H-beam of a rocker arm. We also propose a scheme of forced oscillations excitation system on the test bench by inertial exciter. It includes a DC motor with stepless frequency regulation with inertial vibration exciter on its shaft, which consists of a mass, placed eccentrically relative to the shaft axis. There are two variants of the test bench scheme – with the forced oscillations excitation device and without it.
Źródło:: Journal of KONES; 2011, 18, 1; 457-462
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 7.

Tytuł:: External speed characteristics in engine with multi-stage fuel injection
Autorzy:: Ambrozik, A.
Ambrozik, T.
Kurczyński, D.
Łagowski, P.
Powiązania:: https://bibliotekanauki.pl/articles/245939.pdf
Data publikacji:: 2010
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: piston internal combustion engine
characteristics
engine work parameters
test bench investigations
engine fuels
Opis:: Increasingly higher demands pnt on piston internal combustion engines arę aimed at reducing their harmful impact on the natural environment. This refers primarily to nitrogen oxides, particulate matter and noise emissions. The reduction in emissions ofnoxious components oj exhaust gases in engines is achieved by means of, among others, the use of catalysts decreasing nitrogen oxide emissions, particulate matter filters and oxidising catalysts decreasing carbon monoxide and hydrocarbon emissions. Common Rail injection systems make it possible to increase the engine power, and to reduce fuel consumption, exhaust gas toxicity and noise produced by engines. With Common Rail systems, the pattern of fuel injection process can be designed, consequently the combustion process can be controlled. The paper presents the results of test bench investigations into a compression ignition 1.3 Multijet engine with multistage fuel injection, which is manufactured in Poland by Fiat-GM Powertrain Polska Company. The tests were conducted at a stand constructed at the Heat Engines Laboratory ofthe Kielce University of Technology. The scope of investigations included determining economic and energetic parameters of the engine work, and also environmental parameters, such as the concentration of nitrogen oxides NOX, carbon monoxide CO and carbon dioxide CO2 in exhaust gases, and exhaust gas smokiness. In tests, the engine operated under speed conditions and it was fuelled by two commercial diesel oils that had different physical and chemical properties.
Źródło:: Journal of KONES; 2010, 17, 1; 9-16
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 8.

Tytuł:: Research on hazardous effect of PETROL-ETHANOL blends emissions in spark ignition engines
Autorzy:: Bureika, G.
Pikünas, A.
Grabys, J.
Powiązania:: https://bibliotekanauki.pl/articles/248131.pdf
Data publikacji:: 2008
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: internal combustion engines
engine bench tests
petrol-ethanol blends
hazardous emissions
carbon monoxide
hydrocarbons
carbon dioxide
Opis:: This paper deals with ecological aspects of using alcohol fuels in spark ignition (SI) engines, determining ecological characteristics of SI engine for various fuels. The dependence of the emission of hazardous material-carbon monoxide (CO), hydrocarbons (HC), carbon dioxide (CO2) - on the number of crankshaft revolutions n, engine torque Me and the ignition advance angle teta was determined in the SI engine bench tests. The toxicity of the emission at idle running of the engine had been also measured. The purpose of the bench tests is to work out the characteristics of the partial speed, loading and regulation according to the ignition timing advance. The bench tests of SI engine were performed with the Pb-free petrol A-76 and its mixtures with ethanol ester-aldehyde fraction, using fusels as stabilizers. Aldehyde is a colourless liquid produced by oxidation of alcohol. Fusel is a colourless oily alcohol separated in the rectification of ordinary distilled alcohol. The test bench can estimate the torque Ms, when the revolutions of the crankshaft range from 83 s-1 to 314 s-1 (800-3000 rev/min.), therefore, ecological characteristics of exhaust gases can be determined. The impact of the temperature of the alcohol mixtures' exhaust gases that was lower by 20-30 centigrade C on their toxicity was investigated.
Źródło:: Journal of KONES; 2008, 15, 3; 51-58
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Informacja

Wyszukujesz frazę "bench" wg kryterium: Temat

Źródło danych

Dostawca treści

Kolekcja

Rok wydania

Wydawca

Temat

Autor

Typ dokumentu

Język