Temat: automatic transmission - Katalog OPAC zbiorów

Skocz do pozycji: 1.

Tytuł:: Comparative analysis of the fuel consumption of vehicles equipped with various types of automatic transmissions
Autorzy:: Graba, M.
Mamala, J.
Bieniek, A.
Ulfik, A.
Powiązania:: https://bibliotekanauki.pl/articles/949511.pdf
Data publikacji:: 2018
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: automatic transmission
fuel consumption
control algorithm
CVT
automotive powertrain
road slope
Opis:: The growing number of vehicles moving on Polish roads equipped with various types of automatic transmissions prompted the authors of this publication to carry out research to assess the impact of the use of this type of transmission on the fuel consumption of these vehicles. The presented article presents a comparative analysis of the fuel consumption of vehicles of different manufacturers equipped with automatic transmissions moving in specially prepared driving cycles for research purposes. In the developed driving cycle, the vehicle speed was gradually increased every 10 km/h, maintaining each speed for a period of at least 30 seconds in order to stabilize the measurement results. The tests were carried out for various load stages of the drive system. Load differentiation was made by simulating driving in the prepared cycle for simulated different slopes of the road. The tests were carried out on the MAHA MSR500 chassis dynamometer, and the obtained results for the vehicle moving in automatic mode, where the transmission controller selected the gear ratio according to the programmed algorithm, were compared with the vehicle's fuel consumption for the vehicle gear selected by the driver in the driving cycle. The control software used to test the chassis dynamometer allows taking into account the increasing resistance of traffic along with the increase of vehicle speed, which greatly approximates the simulated conditions in the laboratory to the conditions on the road. The main purpose of this publication is to check whether using automatic transmissions or other control algorithm of these gears can achieve a reduction in fuel consumption.
Źródło:: Journal of KONES; 2018, 25, 4; 119-124
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 2.

Tytuł:: Model testing of the internal leaks of valve body in automatic transmission
Autorzy:: Dziubak, T.
Szczepaniak, P.
Powiązania:: https://bibliotekanauki.pl/articles/246026.pdf
Data publikacji:: 2017
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: automatic transmission
hydraulic system
hydraulic precise pair
wear of hydraulic couplings
internal leaks
ATF fluid flow rate model
Opis:: The article presents the working conditions and the functions of the ATF fluid in an automatic transmission. It was noted that the correct operation of the automatic transmission is heavily influenced by the quality of the ATF fluid, which operates in disadvantageous conditions of oxidising environment, is subject to contamination and undergoes intense shearing, thus changing its physical and chemical properties during use. The analysis included the disadvantageous, from the point of view of loss of fluid pressure in the automatic transmission’s hydraulic system, phenomenon of the fluid’s flow through fractures (clearances) of the hydraulic precise pairs “called the rate of flow through internal leaks” or an “internal leak”. The model of the rate of flow through internal leaks was proposed to determine the impact of the precise pairs’ wear and the hydraulic fluid’s properties on the aggregated leaks in the hydraulic system controller of the automatic transmission. The modelling utilised the dependency between the rate of flow through internal leaks of the hydraulic precise pair and the coaxial circular fracture. The model’s assumptions were formulated. The values of clearances of the electrohydraulic controller’s precise pairs were determined during the measurements of the actual structure – based on the automatic transmission’s mileage. The measurements featured relevant diameters of pushers and sliders, as well as internal diameters of cylindrical openings of manifold sliders and hydraulic suppressors. Variant model testing was conducted with various degrees of the fluid’s wear and temperature (viscosity and density) for conditions of driving with transmission “1” and “2”.
Źródło:: Journal of KONES; 2017, 24, 3; 71-78
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Informacja

Wyszukujesz frazę "automatic transmission" wg kryterium: Temat

Źródło danych

Dostawca treści

Kolekcja

Rok wydania

Wydawca

Temat

Autor

Typ dokumentu

Język