Temat: aircraft turbine engine - Katalog OPAC zbiorów

Skocz do pozycji: 1.

Tytuł:: Impact of work of turbine adaptive engines for the natural environment
Autorzy:: Ćwik, D.
Kowalski, M.
Steżycki, P.
Powiązania:: https://bibliotekanauki.pl/articles/246614.pdf
Data publikacji:: 2018
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: noise of aircraft engines
environmental impact
jet engine turbine
emission of toxic compounds
aircraft engines
turbine jet engine
Opis:: The article describes the problem of the operation of turbine jet, adaptive engine work on the natural environment. In particular, the analysis of noise generated by turbine jet engines has been made. It points out possible directions of noise decrease with particular emphasis upon structural changes within the engines, the task of which is to reduce the noise mission. The example of the modernization is based upon the “bypass” type of one-flow turbine jet engine. The essay contains theoretical basis of calculation of the noise emission level and the results, which graphically indicate a relative level of noise of this type of engine depending upon the amount of discharged air and the diameter of the discharge nozzle and the radius, upon the basis of which the noise level is determined. This work also includes a comparison of the relative noise level of this type of engine with regard to one-flow turbine engine equipped with the function of air discharge to the environment and with regard to two-flow turbine jet engine equipped with air stream flow mixing device. The use of low-emission combustion chambers in the "bypass" turbine engine was indicated. This allowed addressing the problem of emissions of toxic exhaust components by this type of aircraft engines. At the same time, the dependence of this emission related to the mass of fuel used on the engine's thrust range was indicated. The article was concluded with a short summary.
Źródło:: Journal of KONES; 2018, 25, 4; 509-516
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 2.

Tytuł:: The influence of multi - role aircraft mission type on the low bypass engine performance parameters
Autorzy:: Wygonik, P.
Powiązania:: https://bibliotekanauki.pl/articles/242065.pdf
Data publikacji:: 2013
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: gas turbine engine design
airplane-engine integration
aircraft mission optimization
Opis:: The aim of the article is to find the relationship and dependencies between the mission parameters of the multi-role aircraft (altitude, flight velocity, thrust load) and the parameters that define the flow of the turbofan engine. The conclusions of these studies are relevant at the stage of preliminary engine design. There was built the model of thermal cycle of low bypass. The model of an airplane was simplified to its aerodynamic characteristics. The mission was divided into air tasks (stages) such as a take-off, a climb at a certain velocity, sub and supersonic flight and maneuvers (i.e. turn). Dimensionless energy criteria binding both the engine and aircraft parameters were introduced. There were conducted the simulation studies of the model airplane-engine mission to show the part of the mission that "dimensions " the engine. The results were limited to the presentation of the impact of circuit parameters such as T3, π, μ on the defined criteria. The calculations were carried out for a number of selected missions defined in the literature as Loll, HiLoHi and HiHiHi. The comparison of the energy requirements of these missions was done. There were pointed out these criteria of the mission evaluation that may affect making decisions at early design stages. There were designated the areas of design variability in an engine meeting the criteria for energy mission. The advantage of this model is universal character of dimensionless criteria, whereas the disadvantage is the need to build complex models of the engine and the assumption at the outset aerodynamic characteristics of the aircraft. The originality of the presented solution is to show an alternative, unconventional approach to the design process (not as so far) the engine itself but the entire aviation system.
Źródło:: Journal of KONES; 2013, 20, 3; 435-442
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 3.

Tytuł:: Investigation of the dynamic properties of engine fan titanium rotor blades in a high manoeuvrability aircraft in FOD aspect
Autorzy:: Szczepanik, R.
Powiązania:: https://bibliotekanauki.pl/articles/244435.pdf
Data publikacji:: 2013
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: aircraft
combustion engines
turbine engines
engine diagnostic
blades
Opis:: A current problem concerning the use of military and civilian aircraft is the damage caused to turbine compressor blades by ‘foreign objects’. Here the term ‘foreign objects’ means small stones, pieces of metal, cement pitch, asphalt, etc., left on runways and taxiways. Foreign objects also include ice and iced lumps of snow as well as birds sucked into aircraft engine air ducts. All such objects pose a serious threat to proper engine operation. They are very harmful in two respects. One is the direct danger during flight when a bird or some other object is sucked into the engine. The other danger is in what might occur in later flights if the engine, especially the compressor and turbine blades, are not inspected for durability reassessment. This paper presents an analysis of how the size and distribution of defects on blade edges affect, the frequencies and fatigue strength of titanium blades in the first four stages of a high manoeuvrability jet engine fan (low pressure compressor). In particular, damaged high manoeuvrability aircraft fan stage rotor blades and measured natural vibration frequencies and logarithmic decrement of damping of high manoeuvrability aircraft fan titanium blades are presented in the paper.
Źródło:: Journal of KONES; 2013, 20, 2; 371-376
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 4.

Tytuł:: Influence of the gas turbine engine design parameters on the energy consumption of the multirole aircraft missions
Autorzy:: Wygonik, P.
Powiązania:: https://bibliotekanauki.pl/articles/246706.pdf
Data publikacji:: 2012
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: gas turbine engine design
simulation
airplane-engine integration
aircraft mission optimization
Opis:: In the article the analysis of the influence of design parameters of the engine on the performed by the multirole aircraft mission was performed. The problem is complex as a result of performing a series of manoeuvres in various conditions of flight. A special feature of multi-role aircraft mission is a sudden (even pulse) weight change and exactly its reduction as a result of the discharge of cargo bomb, rocket or due to the consumption of ammunition during air combat manoeuvring. Reducing the airplane mass by the weight of the fuel consumed (continuously) and the used weapons radically differ the demands on the energy required to overcome gravity and drag forces. The article shows how the reduction of the aircraft mass influences on the change of the thrust load factor. It was built the mathematical model of the system engine-aircraft-air job (taking into account the flight conditions, elements of the mission - subsonic and supersonic flight, flight time, the heat-and-gasdynamic and mass model of the engine). The model enables for the simulation research of the complex flight missions and their evaluation on the basis of the constructed criteria. The model includes a parametric description of physical processes in the turbofan engine, thus provides a direct assessment of the impact of selection of engine parameters on the effectiveness of the mission. The results of calculations according to classical criteria (e.g. kilometre fuel consumption, specific fuel consumption) were presented. The paper presents new criteria, which enable to analyze the energy consumption of the complex mission of the aircraft (e.g. energy consumption: the unit range, the degree of utilization of energy resources and the carried out the mission engine). Criteria were built in by combining the parameters necessary for the flight with disposable ones. On the basis of these parameters there was done an assessment of the "quantitative" adjustment of a power unit to various missions such as subsonic, supersonic and mixed (for different their proportion), for different levels and the plane range. The results were presented in a pictorial way on numerous charts.
Źródło:: Journal of KONES; 2012, 19, 2; 569-576
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 5.

Tytuł:: The influence of on-design bypass turbine engine parameters on multipurpose aircraft missions energy-consuming
Autorzy:: Wygonik, P.
Powiązania:: https://bibliotekanauki.pl/articles/243880.pdf
Data publikacji:: 2010
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: military gas turbine engine
military aircraft mission analysis
multipurpose aircraft
energy consuming
Opis:: In the article there was presented a quality assessment of parameters selection of bypass turbine engine for a multipurpose aircraft. It was assumed that the assessment criterion results from the energy-consumption of a flight. The criteria of energy-consumption range were defined as the relation of sum ofenergy supplied to the aircraft on the driven stages to the distance during a mission. The second criterion of unitary energy-consumption is defined as the relation of the movement energy-consumption to the product of the aircraft mass and the route during the elementary stage of the flight. With the use of the already worked out models of the power unit (bypass turbine engine with jet mixer and afterburner) of an aircraft (already known mass and aerodynamic characteristics) there were determined the ranges of thrust which are indispensable for a flight and available for the engine at each stage of the mission: take off, climb, subsonic and supersonic flight and turn with different overload factor. On the example of three chosen aircraft missions (Lo-Lo-Lo, Hi-Lo-Hi and Hi-Hi-Hi) the models of mission energy-consumption were developed. For the accepted change ranges of the comparative cycle parameters of the turbine engine the run of energy-consumption was tested. It was stated that for the assumed data the most energy-consuming mission is Lo-Lo-Lo, wherefore the increase of the compression and the rate of bypass reduces the energy-consumption of the mission.
Źródło:: Journal of KONES; 2010, 17, 1; 499-506
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 6.

Tytuł:: Thermodynamics and mass selection criterions of low bypass turbine engine parameters for multi-purpose
Autorzy:: Wygonik, P.
Powiązania:: https://bibliotekanauki.pl/articles/244019.pdf
Data publikacji:: 2008
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: multi-purpose aircraft
turbine engines
airframe and engine integration
thermal cycle
Opis:: Parameters of the turbofan engine comparative cycle (turbine inlet temperature, compression of compressors), by-pass ratio, fan compressor, (or low pressure compressor) are the most important engine parameters which determine their characteristics and construction. In order to fulfill the task there is a necessity for searching the optimum parameters for the system. The most important equation that binds airplane and engine characteristics is mass balance equation. The sum of engine mass and fuel mass was called total engine-fuel mass. In the paper specific total engine mass index was introduced (gamma 2). This index is equal to total engine-fuel mass divided by thrust in design point. Impact of the choice of the design point on the total mass index of the engine and the fuel used up was presented for different airplane mission. The next problem is to find those thermodynamics parameters (compression ratio, turbine inlet total temperature, bypass ratio) which give minimum of total mass of engine and consumed fuel for different airplane missions. A very important parameter that plays the part in fuel consumption is airplane flight time. The most important conclusion is that the best thermodynamics parameters from minimum mass criterion are less than for minimum specific fuel consumption.
Parametry obiegu porównawczego dwuprzeplywowego turbinowego silnika odrzutowego determinują jego charakterystyki i schemat konstrukcyjny. W pracy przedstawiono problem poszukiwania optymalnych wartości parametrów termogazodynamicznych obiegu porównawczego silnika turbinowego. Do tych parametrów zaliczono: spręż całkowity sprężarki, temperaturę przed turbiną, stopień podziału strumieni. Przedstawiono wpływ wybranych warunków lotu, sprężu sprężarki i temperatury przed turbiną na zmianę ciągu jednostkowego i jednostkowego zużycia paliwa. Jako kryterium optymalizacji wybrano sumaryczną masę silnika i paliwa, wymaganą do wykonania zadania lotniczego. Wykorzystano, zbudowany na potrzeby innych prac, model silnika, który jest funkcją parametrów termogazodynamicznych. Wyprowadzono zależności pozwalające na optymalizację jednostkowej masy sumarycznej (jako kryterium bezwymiarowego). Przeprowadzono szereg obliczeń, których wyniki przedstawiono na wykresach. Wykazano, że na podstawie wybranego kryterium optymalizacji, jakim jest sumaryczna masa silnika i paliwa, można wyznaczyć wartości sprężu sprężarki, dla których wskazane kryteria oceny masy osiągają swoje minimum.
Źródło:: Journal of KONES; 2008, 15, 2; 543-551
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 7.

Tytuł:: Noise emission level versus the structure of the aircraft turbine engine
Autorzy:: Kowalski, M.
Powiązania:: https://bibliotekanauki.pl/articles/241859.pdf
Data publikacji:: 2012
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: noise of aircraft engines
environmental impact of a jet engine turbine
Opis:: This article presents the problem of noise generated by turbine jet engines. It points out possible directions of noise decrease with particular emphasis upon structural changes within the engines, the task of which is to reduce the noise mission. The example of the modernization is based upon the "bypass" type of one-flow turbine jet engine. The essay contains theoretical basis of calculation of the noise emission level and the results, which graphically indicate a relative level of noise of this type of engine depending upon the amount of discharged air and the diameter of the discharge nozzle and the radius, upon the basis of which the noise level is determined. This work also includes a comparison of the relative noise level of this type of engine with regard to one-flow turbine engine equipped with the function of air discharge to the environment and with regard to two-flow turbine jet engine equipped with air stream flow mixing device. The essay ends with short conclusions. In order to struggle with the air noise special "Environmental Protection Programmes" are prepared. Civil airports and military airports prepare new procedures for taking off and approaching planes as well as optimize the approach and take off airport flight zone corridors. Unfortunately, in the case of so big surfaces, acoustic screens would not bring desired effects, also due to costs.
Źródło:: Journal of KONES; 2012, 19, 4; 325-332
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 8.

Tytuł:: Criteria for the assessment of the engine efficiency of the multi-purpose aircraft missions
Autorzy:: Wygonik, P.
Powiązania:: https://bibliotekanauki.pl/articles/245198.pdf
Data publikacji:: 2014
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: multi-purpose aircraft
turbine engines
airframe and engine integration
thermal cycle
Opis:: The problem of design parameters selection of the turbine engine is the most important task at the preliminary design stage of the multi-purpose aircraft. A special feature of the multi-purpose aircraft mission is a sudden (even pulse) weight change, especially its decrease as a result of discharge of cargo bombing or rockets due to the ammunition consumption during air combat manoeuvring. In this article the attempt to use economic and mass criteria to assess the impact of the type of air missions on the choice of the design parameters of the engine was done. As the design, parameters there were selected the following measures: compression ratio, the turbine temperature and the bypass ratio. A mathematical model of the engine – aircraft – air task system was built (taking into account the flight conditions, the mission elements – the subsonic and supersonic flight, flight time, thermo-gas-dynamic and mass model of the engine). The model enables to conduct the simulation research of the complex flight missions and their assessment on the basis of the constructed criteria. The model includes a parametric description of physical processes in the turbofan engine, thereby allowing a direct assessment of the impact of the selection of engine parameters on the effectiveness of the mission. The paper presents the results of calculations according to the classical criteria (e.g. kilometre fuel consumption, specific fuel consumption of the engine). New criteria for evaluation were presented; they are the energy efficiency of complex mission of an aircraft and the relative total and specific fuel consumption. The values of circuit parameters that need to be taken as design constraints for the engine to allow the implementation of the aviation missions were determined. The results are shown in an illustrative way on the number of graphs.
Źródło:: Journal of KONES; 2014, 21, 3; 301-307
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 9.

Tytuł:: Criteria of aircraft engine parameters evaluation for multi-purpose aircraft
Kryteria oceny parametrów silnika turbinowego stanowiącego napęd samolotu wielozadaniowego
Autorzy:: Wygonik, P.
Powiązania:: https://bibliotekanauki.pl/articles/243118.pdf
Data publikacji:: 2007
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: samolot wielozadaniowy
silniki turbinowe
integracja samolotu i silnika
multi-purpose aircraft
turbine engines
airframe and engine integration
Opis:: At the stage of a power unit selection for a multi-purpose aircraft the problem of mutual relations between the dimension of an aircraft and an engine should be solved. Starting from the motion equation of an aircraft and the theory of similarity the criteria and performance were determined which connect in a geometrical and power way the engine and the aircraft. The analysis of the influence of flight conditions and the parameters of an engine comparative cycle on the geometrical dimensions was conducted. In the paper it was shown that the fundamental flight stage which determines the relations between the geometrical parameters of the aircraft and the engine is the take-off or supersonic flight on the big altitude. Usually the parameters selection of the turbine engine thermal cycle is done on the basis of the internal characteristics of the engine, such as specific thrust and specific fuel usage. In case of the turbofan engine model with the mixer, afterburner, and the aircraft model (with simplified aerodynamic and mass characteristics) the influence of the cycle parameters on the performance and aerodynamic lift/drag ratio, the agreed range and the theoretical range was described. The next problem is to find those thermodynamics parameters (compression ratio, turbine inlet total temperature, bypass ratio) which give minimum of total mass of engine and consumed fuel for different airplane missions gamma Z. For long-lasting mission minimum gamma Z is occurs for compression ratio near his economic value (for specific fuel consumption). For short missions minimum of gamma Z occurs for smaller compression ratio (near 20-30), but greater than for those giving maximum specific thrust. A little change in minimum value of gamma Z gives a big difference in compression ratio. The most important conclusion is that the best thermodynamics parameters from minimum mass criterion are less than for minimum specific fuel consumption.
Na etapie wyboru zespołu napędowego do samolotu wielozadaniowego należy rozwiązać problem wzajemnych relacji między wymiarami samolotu i silnika. Wychodząc z równań ruchu samolotu i teorii podobieństwa wyznaczono kryteria i wskaźniki wiążące geometrycznie i energetycznie silnik oraz samolot. Przeprowadzono analizę wpływu warunków lotu samolotu i parametrów obiegu porównawczego silnika na wybrane wymiary geometryczne. W pracy wykazano, że zasadniczym stanem lotu determinującym relacje między parametrami geometrycznymi samolotu i silnika jest start samolotu lub przelot naddźwiękowy na dużej wysokości. Zwykle doboru parametrów obiegu cieplnego silnika turbinowego dokonuje się w oparciu o charakterystyki wewnętrzne silnika- ciąg jednostkowy, jednostkowe zużycie paliwa. W oparciu o model silnika dwuprzepływowewgo, z mieszalnikiem strumieni, dopalaczem oraz model samolotu (przyjęto uproszczone charakterystyki aerodynamiczne i masowe) określono wpływ parametrów obiegu na podstawowe wskaźniki samolotu jak doskonałość aerodynamiczna, zasięg umowny i zasięg teoretyczny. Kolejnym problemem jest określenie parametrów termogazodynamicznych, które pozwalają minimalizować masę silnika i zużytego w trakcie misji samolotu paliwa. W trakcie misji tzw. długich parametr jednostkowej masy względnej silnika gamma Z osiąga minimum dla sprężu całkowitego sprężarki rzędu (20-30), ale większych niż wartości sprężu optymalnego. Niewielka zmiana w wartości minimum gamma Z powoduje znaczną zmianę w wartości sprężu sprężarki. Parametry termogazodynamiczne, które pozwalają minimalizować masę sumaryczną paliwa i silnika są mniejsze niż dla minimum jednostkowego zużycia paliwa i zbliżone do wartości charakterystycznych dla współczesnych silników lotniczych.
Źródło:: Journal of KONES; 2007, 14, 2; 571-578
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Informacja

Wyszukujesz frazę "aircraft turbine engine" wg kryterium: Temat

Źródło danych

Dostawca treści

Kolekcja

Rok wydania

Wydawca

Temat

Autor

Typ dokumentu

Język