Temat: actuator - Katalog OPAC zbiorów

Skocz do pozycji: 1.

Tytuł:: Experimental verification of the model of electrohydraulic drive for internal combustion engine valves
Autorzy:: Szydłowski, T.
Powiązania:: https://bibliotekanauki.pl/articles/245587.pdf
Data publikacji:: 2009
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: camless engine
hydraulic actuator
internal combustion engine
servovalve
Opis:: The paper presents experimental electrohydraulic valve drive for internal combustion engine. The design is asingle-acting hydraulic actuator with spring return controlled by servovalve. Such solution shouldgive free control of valve lift, valve open and valve close time. In the article the principles of the operation of the drive are described. The paper focuses on exploring the dynamic of experimental electrohydraulic engine valve actuation system working in open-loop. For investigations the mathematical and simulation models were elaborated. The values of unknown coefficients of the models were intercepted on two test stands. First of them served to servovalve research. Second was built on the basis of the prototype drive and let on the research of the dynamics of the all drive. Chosen results of these investigations are placed in the article. The drive was explored for different oil supply pressures, control signals and spring mounting lifts. Experimental dates let to verified dynamic mathematical model. Comparisons of valve lift proceedings obtained from experiments and simulations are presented in the article. Verified model let to execute the analysis of the features of such drive and point necessary modifications for the correct realization of the process of the gas exchange in internal combustion engine.
Źródło:: Journal of KONES; 2009, 16, 3; 401-408
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 2.

Tytuł:: Modern actuator
Autorzy:: Mielewczyk, A.
Powiązania:: https://bibliotekanauki.pl/articles/242423.pdf
Data publikacji:: 2014
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: main engine
control
controller
actuator
regulating valve
transducer
Opis:: The main engine of the ship is a complex technical object, which provides propulsion of the screw and ensures the safety of a ship at sea. It consists of a number of control systems such as lube oil temperature control, temperature control of the cooling water, fuel viscosity control or adjustable speed control of the main engine. Each of the main propulsion control system affects the safety of the ship. Continuous automation systems are built with standard transducer of measured quantity, the controller and actuator. The actuator is responsible for the direct setting of the size of the control object. The actuator is connected to the control valve and the actuator position change translates into a change in the flow rate of the working medium. Thus, the operating element is required to operate in the linear characteristics of the standard signal range. From the other hand, the control valve provides flow characteristics linear or of equal percentage. This control principle of medium flow is used in various control systems. The actuator of the control valve is always equipped with a positioner, which corrects errors in the position of the valve relative to the input signal. The presented design of the motorized valve is an analog system. Using the technique of converting multiple digital signal causes the system complexity and predisposition to damage. Eliminating the intermediate elements can improve the quality control and system safety. Then it is beneficial to have a design of the operating element based on the direct digital processing unit. The aim of paper has been to present design of the valve actuator, which completely abandons the digital-to-analogue convertor. The new design should increase the level of security of the system and quality control. The design layout is presented in the article. The new actuator is on-off valves, which control, directly from the digital bits, the form of the output signal. The control signal may use the control algorithms to be used or developed individually to the actuator design.
Źródło:: Journal of KONES; 2014, 21, 2; 221-226
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 3.

Tytuł:: Simulation research of the hydraulic drive for valves of internal combustion engine
Autorzy:: Szydłowski, T.
Smoczyński, M.
Powiązania:: https://bibliotekanauki.pl/articles/950113.pdf
Data publikacji:: 2013
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: camless engine
hydraulic actuator
internal combustion engine
servovalve
Opis:: This paper describes simulation research of single-acting hydraulic drive for valves of internal combustion engines. The proposed drive was composed of commercial servovalve and typical hydraulic single-acting actuator. Research was performed for the prepared and verified model of this drive. In the paper mainly analysed was the impact of control signals on course of valve lift and its characteristic parameters like: delay of start of valve movement in opposition to the start of the control signal, the time of opening and closing of the valve, the valve lifting time, the course of valve lift, fill factor of the area under the valve lift curve and velocity of the valve subsidence. Special attention was given to the closing movement of the valve. Drive control was limited to step control signal. In the final phase of closing the valve, the control method had to slow down and stop the valve, but without a significant influence on the valve closing phase. During research the fill factor of the area under the valve lift curve was calculated and compared with values obtained for the classic drive with cam. A number of simulations allowed to determine the optimal control signal for the course with deceleration of the valve. Based on simulation studies it was found that comparable fill factors of the area under the valve lift curve for cam drive and analyzed electrohydraulic drive were obtained up to over 4000 rpm speed. Above this speed the factor was significantly smaller for hydraulic drive. For low engine speeds the values of factor were acceptable and amounted to about 0.7. Unfortunately for the valve opening times for engine speed 6000 rpm, tested drive did not provide the full opening of the valve and the fill factor of the area under the valve lift curve was unsatisfactory. In this research, the frequency characteristics of the servovalve published by their manufacturers were used. It demonstrated that because of the delay and response speed of the valve is necessary to use units generating a control signal ahead in relation to the desired moment of opening the valve.
Źródło:: Journal of KONES; 2013, 20, 2; 385-391
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 4.

Tytuł:: Experimental research of properties of hydraulic drive for valves of internal combustion engines
Autorzy:: Szydłowski, T.
Smoczyński, M.
Powiązania:: https://bibliotekanauki.pl/articles/245475.pdf
Data publikacji:: 2013
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: camless engine
hydraulic actuator
internal combustion engine
servovalve
Opis:: This paper describes a research stand and results of experimental research of single-acting hydraulic drive for valves of internal combustion engines. The research stand of the hydraulic valve drive was consisted of: typical valve drive for high-speed internal combustion engine, commercial hydraulic actuator, commercial hydraulic accumulator and electrically controlled hydraulic distributor, which controlled the flow of oil supply to the hydraulic actuator. Rexroth commercial servovalve was used as hydraulic distributor for this valve drive. Components of hydraulic valve drive were mounted to specially designed research sleeve. On this sleeve complete drive, which consisted of a hydraulic cylinder and servovalve, was mounted. Drive control was performed in an open loop with a use of rectangular control signal. Displacement of the valve was measured by an optical displacement sensor. Tests were performed for constant lift of the valve, supply pressure set in the range of 6 to 10 MPa and at fixed temperature of the working medium and different initial deflections of valve spring. The behaviour of the drive was researched for bipolar and a rectangular control signals. Such range of measurements was to determine inter alia: the impact of the supply pressure and the control signals values on the drive work. Obtained results were used to verify the simulation model in a wide range of variation of the characteristic parameters of the electro-hydraulic actuator. The results of experimental measurements like valve movement and pressures in the drive were shown and analysed in this paper. With a reference to the valve movement, a detailed calculations of the valve kinematics were performed. Special attention was given to the opening and closing velocities of the valve, depending on the servo control signal. Subsidence valve velocity during its return movement was calculated. This subsidence valve velocity is an important parameter in terms of the applicability of this drive for the internal combustion engines. Valve opening time delay in opposition to the current control signal was also specified and discussed. Obtained results allowed to conclude that the proposed drive provides acceptable kinematic parameters for high-speed engines at supply pressures of at least 8 to 10 MPa. During the measurements acceptable valve subsidence speeds were obtained. It was found that there is a possibility of adjustment of this parameter by setting the slider servovalve negative overlap. Results became the basis of development of the model of this type of the drive. Further simulation studies will allow to evaluate the applicability of such valve drive for internal combustion engines. Further simulation studies allow to compare the proposed solution with known literature hydraulic valve drives.
Źródło:: Journal of KONES; 2013, 20, 1; 351-358
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 5.

Tytuł:: Model of hydraulic double-acting drive for valves of internal combustion engine
Autorzy:: Szydłowski, T.
Smoczyński, M.
Powiązania:: https://bibliotekanauki.pl/articles/246081.pdf
Data publikacji:: 2009
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: internal combustion engine
servovalve
hydraulic actuator
camless engine
Opis:: The article presents the idea and the model of electrohydraulic double-acting valve drive for internal combustion engine. In this solution to control the position of the engine valve used Rexroth's servovalve and the double-acting actuator. This drive should give free control of valve lift, valve open andvalve close time. In the article the principles of the operation and the mathematical model of the drive are described. Submitted model gives bases to the initial value definition of the main parameters of the hydraulic drive. It lets execute the analysis of the features of such drive and point necessary modifications for the correct realization of the process of the gas exchange in internal combustion engine. The first results from the simulation showed that proposed solution allows obtaining desirable run of lift of valve in the wide range of engine speed. Comparisons of valve lift proceedings driven hydraulically and mechanically by the use of harmonic cam, for two engine speeds, obtained from simulations are presented in the article. These comparisons show that at greatest engine speeds it is indispensable the use of pressures of the working liquid exceeding 10 MPa to obtain nearing results to the classical mechanical timing gear. Preliminary simulation test results indicate that it may ensure desired run of lift of valve in the wide range of engine speed
Źródło:: Journal of KONES; 2009, 16, 1; 487-494
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 6.

Tytuł:: Binary valves in analog control
Autorzy:: Mielewczyk, A.
Powiązania:: https://bibliotekanauki.pl/articles/242392.pdf
Data publikacji:: 2017
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: control
digital signal
actuator
control valve
transducer
positioner
Opis:: Continuous control systems are built with standard transducer measured signal, the controller and actuator. The actuator is responsible for the direct setting of the size of the control object. The actuator is connected to the control valve and the actuator position change signal into the flow rate of the working medium. Since the operating element is required the linear characteristics in the standard signal range to work. The other hand, the control valve provides flow characteristics linear or equal percentage. This flow control principle is used in various control systems. The actuator of the control valve is always equipped with a positioner, which corrects errors in the position of the valve relative to the input signal. The presented design of the control valve is an analogue system. Using the technique of converting multiple digital signal causes, the system is susceptible to damage. Remove the intermediate elements can improve the quality control and safety system. Such benefits give a design of the operating element based on direct digital processing unit and control program. The examples of control present article.
Źródło:: Journal of KONES; 2017, 24, 2; 141-146
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 7.

Tytuł:: Numerical investigation of a movable wall response on a flame propagation
Autorzy:: Górniak, A.
Kaźmierczak, A.
Powiązania:: https://bibliotekanauki.pl/articles/247444.pdf
Data publikacji:: 2013
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: pyrotechnic actuators
shock wave
AUTODYN
flame propagation
pyrotechnic actuator
Opis:: This paper contains a description of a shock wave (called a flame when the deflagration is considered) propagation pattern impact on a motion of a barrier. Here, the numerical research was conducted on a model of a pyrotechnic actuator, hence, the piston is understood as a movable barrier. The processes occurring within the pyrotechnic actuators after ignition of a pyrotechnic propellants have been explained. The investigations are focused on the dependence of a shape of the actuator’s combustion chamber and the piston stroke time. It appears that the appropriate design of the combustion chamber can decrease the time required for a piston total stroke using this same type of a propellant. The visualization of the flame occurring due to ignition of the propellant is crucial for understanding the dependence between the construction of the actuators interior and the piston stroke time. Therefore, the approach of simulating numerically the flames aroused. The simulation was conducted on a full scale 3D model of a pyrotechnic actuator which is a detail representation of a real object on which the verification test will be conducted. However, only the flame propagation was considered here. The material of an actuators members was not investigated, hence the AUTODYN solver considered them as a single rigid bodies with its own mass and inertia.
Źródło:: Journal of KONES; 2013, 20, 2; 135-141
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 8.

Tytuł:: Effectiveness of the active pneumatic suspension of the operator’s seat of the mobile machine in depend of the vibration reduction strategies
Autorzy:: Chwastek, S.
Pobędza, J.
Powiązania:: https://bibliotekanauki.pl/articles/245957.pdf
Data publikacji:: 2018
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: unsprung mobile machines
active vibration reduction
controlled suspension seats
pneumatic actuator
Opis:: Low speeds of heavy mobile machines combined with large inertia result in the excitation of low frequency vibrations. Dissipation of vibration energy in the case of unsprung machines is performed only through tires, which slightly reduces the intensity of vibrations. Effective reduction of vibrations of mobile machines is possible only with active or semi-active methods. In unsprung mobile machines, on the way of propagation of vibrations between the source of vibrations and the protected object (machine operator), are vibroisolation systems located. These are most often controlled seat suspensions. In the case of the active suspensions, it is necessary to provide external energy, e.g. in the form of compressed air. The compressed air has the advantage that it is generally available in working machines as the working fluid and has its environmentally friendly properties (leaks do not contaminate the environment). This article is the result of the continuation of work on active methods of vibro-activity lowering in mobile machines, which resulted in, among others, elaboration of simulation model of the active operator’s seat suspension with controlled pneumatic actuator and its experimental identification. In particular, it was verifying the effectiveness of the adopted solution made the identification the friction model and thermodynamic phenomena in the controlled pneumatic cylinder. The aim of this work is parametric optimization of the suspension system and searching for the optimal control strategy. Experimental tests were carried out under conditions of harmonic excitations, coming from the electromechanical vibration exciter with controllable pitch and frequency. Data acquisition system and control circuit of the proportional directional control valve, supplying compressed air to the actuator were implemented using MATLAB-Simulink Real-Time software.
Źródło:: Journal of KONES; 2018, 25, 3; 93-98
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 9.

Tytuł:: Model identification of active pneumatic vibration reduction operator’s seat of mobile machines
Autorzy:: Chwastek, S.
Pobędza, J.
Powiązania:: https://bibliotekanauki.pl/articles/244627.pdf
Data publikacji:: 2016
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: unsprung machines
active reduction of vibration
controlled suspension seats
pneumatic actuator
Opis:: Low-frequency vibrations, generated in mobile machines during their driving, could be reduced only by use of active or semiactive methods. In conditions of low-frequency vibrations, energy dissipation in the machines tires slightly reduces the intensity of the vibration. Unsprung mobile machines are usually equipped with system of vibration isolation, which is located on the way of vibration propagation, between the vibration source and the protected object (the operator of the machine). Generally, controlled seat suspension is used. In the case of the active suspensions, it is necessary to provide external energy, e.g., in the form of compressed air. The compressed air has the advantage that it is generally available in working machines as the working fluid and has its environmentally friendly properties (leaks do not contaminate the environment). This article is the result of the continuation of work on active methods of vibro-activity lowering in mobile machines, which resulted in, among others, elaboration of simulation model of the active operator’s seat suspension with controlled pneumatic actuator. Currently aim of the study was experimental verification of the theoretical results; this verification was performed on the laboratory test bench. In the stand tests, special attention was paid on the assumed models of friction and thermodynamic phenomena in pneumatic actuator, as well as on the control system. Experimental tests were carried out under conditions of harmonic excitations, coming from the electromechanical vibration exciter with controllable pitch and frequency. Data acquisition system and control circuit of the proportional directional control valve, supplying compressed air to the actuator were implemented using Matlab-Simulink Real-Time software. Identification of the simulation model allows for getting the right parameters of the seat suspension. In addition, parametric optimization of the seat suspension system and functional optimization of control strategy would be possible in the next step.
Źródło:: Journal of KONES; 2016, 23, 4; 55-62
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 10.

Tytuł:: Effectiveness of the active pneumatic suspension of the operator’s seat of the mobile machine in depend of the vibration reduction strategies
Autorzy:: Chwastek, S.
Pobędza, J.
Powiązania:: https://bibliotekanauki.pl/articles/244967.pdf
Data publikacji:: 2018
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: unsprung mobile machines
active vibration reduction
controlled suspension seats
pneumatic actuator
Opis:: Low speeds of heavy mobile machines combined with large inertia result in the excitation of low frequency vibrations. Dissipation of vibration energy in the case of unsprung machines is performed only through tires, which slightly reduces the intensity of vibrations. Effective reduction of vibrations of mobile machines is possible only with active or semi-active methods. In unsprung mobile machines, on the way of propagation of vibrations between the source of vibrations and the protected object (machine operator), are vibroisolation systems located. These are most often controlled seat suspensions. In the case of the active suspensions, it is necessary to provide external energy, e.g. in the form of compressed air. The compressed air has the advantage that it is generally available in working machines as the working fluid and has its environmentally friendly properties (leaks do not contaminate the environment). This article is the result of the continuation of work on active methods of vibro-activity lowering in mobile machines, which resulted in, among others, elaboration of simulation model of the active operator’s seat suspension with controlled pneumatic actuator and its experimental identification. In particular, it was verifying the effectiveness of the adopted solution made the identification the friction model and thermodynamic phenomena in the controlled pneumatic cylinder. The aim of this work is parametric optimization of the suspension system and searching for the optimal control strategy. Experimental tests were carried out under conditions of harmonic excitations, coming from the electromechanical vibration exciter with controllable pitch and frequency. Data acquisition system and control circuit of the proportional directional control valve, supplying compressed air to the actuator were implemented using MATLAB-Simulink Real-Time software.
Źródło:: Journal of KONES; 2018, 25, 4; 43-48
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 11.

Tytuł:: Advantages conferred by shock absorbers with cylindrical actuator application to landing gear
Autorzy:: Niculescu, A. I.
Jankowski, A.
Kowalski, M.
Sireteanu, T.
Powiązania:: https://bibliotekanauki.pl/articles/247256.pdf
Data publikacji:: 2016
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: shock absorber
cylindrical actuator
simulation
comfort
load state
vehicle protection
pneumatic spring
Opis:: Shock absorber with cylindrical actuator is a new concept of integrated damper with floating device, in international patent application PCT/EP2016/061515, with wide application in road, rail and aerial vehicles. Comparative to the known solution with rubber sleeves or bellows, the new one is capable to work at more increased pressure being more compact and due to metallic cylinder is more reliable. The other important advantage consists of it applicability at any kind of shock absorber without any special preparation, the solution consisting of replacing the dust shield with a pneumatic cylinder sealed against rod with a gasket and sliding closed in the lower part by sealing element/s fitted in trough/troughs practiced in an annular body fastened against the outer cylinder. For a better behaviour the patent application contains and solutions with double sliding sealing working at high pressure and thus assuring enough floating forces to sustain the vehicle without standard metallic spring so it can be utilized successfully in aerial vehicles landing gear. By using displacement and pressure transducers and equipment of control and command, it becomes an active suspension. The paper presents the double sliding sealing solution and demonstrates, by simulation the advantages confer by this new solution of shock absorber with cylindrical actuator in landing gear. This purpose was realized a virtual suspension model on which simulated hard landing for vehicle load and unload states, for different pneumatic spring preloaded forces.
Źródło:: Journal of KONES; 2016, 23, 1; 255-262
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 12.

Tytuł:: Active vibration reduction operator’s seat with the use of controlled single-acting pneumatic actuator
Autorzy:: Chwastek, S.
Powiązania:: https://bibliotekanauki.pl/articles/247371.pdf
Data publikacji:: 2015
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: mobile heavy machines
unsprung vehicles
active reduction of vibration
controlled suspension seats
pneumatic actuator
Opis:: Mobile heavy machines produce vibrations with low natural frequencies. Because they tend to ride at low speeds, excitations due to road roughness excite low frequency vibrations, which can be reduced by active or semi active methods only. Under conditions of low frequency vibrations, energy dissipation in tires will reduce the vibration intensity in a minor degree only. In the unsprung mobile machine vibration isolation system are provided between a vibration source and the protected object (operator) along the path of vibration propagation. Most machines are now equipped with controlled suspension seats. In the case of active suspensions, the external energy source is required, for instance in the form of compressed air. The compressed air has the advantage that it is generally available in heavy machines as the working fluid and is environmentally friendly. Simulation tests were carried out both in the time domain in Matlab-Simulink and in the frequency domain in the program Mathcad. Simulation tests were performed to investigate effectiveness and stability of the proposed solution and the results were deemed satisfactory. The system was found to be feasible and implementable with respect to every parameter. The first purpose of this study is to develop a simulation model of the active suspension of operator's seat based on an adjustable pneumatic actuator. The other purpose of this study is to examine the effectiveness of different control strategies.
Źródło:: Journal of KONES; 2015, 22, 3; 13-19
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 13.

Tytuł:: Diagnostics of modern diesel engines on the example of Fiat 1.3 JTD MultiJet engine
Autorzy:: Prajwowski, K.
Powiązania:: https://bibliotekanauki.pl/articles/245043.pdf
Data publikacji:: 2016
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: engine diagnostics
sensor system
actuator system
oscilloscope signal waveforms
diagnostyka silnika
system czujników
system siłownika
Opis:: Initially, electronic components replaced the mechanical ones to make various systems more reliable. Mechanical control systems, due to the wear of movable parts and imprecise adjustment, were affected by large errors, which are not shown by electronic circuits operating according to constant set-points. Then, a sharp increase in electronisation was associated with the tightening of exhaust gas emission regulations. Progress in some cases is forced by environmental protection, in other ones by market competition. Modern motor vehicles, slow moving vehicles, military vehicles, etc., are the technical systems being constructed using the latest developments in many fields of science, first of all in mechanics and machine engineering, electrical engineering, electronics, information technology, and chemistry. The rapid development of electronics has led to an increase in the number of electronic components in motor vehicles in all systems, starting with an engine, which has been modified first, to comfort and infotainment systems. The paper presents example measurements of sensors and actuators of an engine with Common Rail fuel supply system on the example of Fiat 1.3 JTD MultiJet engine. The measurements were made using various diagnostic instruments, such as a diagnostic tester, a multimeter or an oscilloscope. Sometimes, the reading of error codes with a diagnostic tester itself is not enough and it is necessary to check the signal waveform with an oscilloscope, which has been presented in this paper.
Źródło:: Journal of KONES; 2016, 23, 3; 403-409
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 14.

Tytuł:: Hybrid vehicle diagnostics
Autorzy:: Prajwowski, K.
Osipowicz, T.
Powiązania:: https://bibliotekanauki.pl/articles/247375.pdf
Data publikacji:: 2017
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: hybrid vehicle
diagnostics
sensor
actuator technology
oscilloscope signal characteristics
pojazd hybrydowy
diagnostyka
czujnik
technologia napędu
sygnał oscyloskopu
charakterystyka
Opis:: The history of hybrid vehicles has started between the 19th and the 20th century because then the first project of a hybrid vehicle was constructed. The first man who manufactured a front hub mounted electric propulsion connected with a generator powered by a spark ignition engine was Ferdinand Porsche. This vehicle was called the Lohner- -Porsche Electromobile. The first mass-produced hybrid vehicle was the first generation Toyota Prius. The model premiere was in 1996 and the production started one year later. The vehicle was equipped with a 1.5 dcm 58 hp spark ignition engine and with the added electric propulsion. It generated 40 mechanical hp. Since 2000, a 72 hp spark ignition engine and a 44 hp electric generator were mounted. Fuel consumption of this model was 5 litres per 100 km. In the early 2000s, 95% hybrid vehicles were the Toyota Prius. The biggest competitor to the Toyota Prius was the Honda Insight. Lexus and Mercedes started manufacturing hybrid vehicles few years later. The most popular car brands that sell hybrid vehicles are Toyota and Lexus from Toyota Motor Corporation. This article describes an example of diagnostic possibilities for the hybrid vehicle system. The construction of vehicle models that use two propulsion systems (spark ignition engine and electric generator) results in the development and increase in control system devices. The measurements were made using various diagnostic devices, e.g. a diagnostic scanner, mustimeter, megohm-meter and oscilloscope. The reading of fault codes is not enough so it is necessary to use a mustimeter or a megohm-meter to examine the signal characteristics, which is presented in this article.
Źródło:: Journal of KONES; 2017, 24, 1; 309-315
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Informacja

Wyszukujesz frazę "actuator" wg kryterium: Temat

Źródło danych

Dostawca treści

Kolekcja

Rok wydania

Wydawca

Temat

Autor

Typ dokumentu

Język