Temat: Pollution - Katalog OPAC zbiorów

Skocz do pozycji: 1.

Tytuł:: Technical requirements and methods of testing retrofit LPG systems for motor vehicles, in accordance with the UN / ECE 115 Regulation
Autorzy:: Majerczyk, A.
Powiązania:: https://bibliotekanauki.pl/articles/245493.pdf
Data publikacji:: 2011
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: air pollution
environmental protection
LPG
Opis:: The UN / ECE 115 Regulation concerns technical requirements and methods of measurements for retrofit LPG systems to be installed in the motor vehicles already in operation In Poland, the 115 Regulation was adopted in 2004 but has not been observed. Regulation 115 is used in other countries, which created the need for tests. ITS has been conducted tests according to R115 since 2006. The technical requirements imposed by 115 Regulation include emission test, OBD testing, testing of maximum power at the wheels and testing the methods of the system elements installation in the vehicle. The article presents the requirements of the Regulation and the conclusions of the tests conducted at ITS on over 100 vehicles equipped with LPG systems. The paper presents: vehicle equipped with LPG systems tested at ITS as part of the statutory ITS work, time of switching over from running on petrol to LPG fuel during the driving test following a cold engine start, onset of the emission during the EUDC test following a cold start in respect to the value of the total emission in the emission test in accordance with the Regulation 83.05 during the first 780 seconds of the driving test, registered signals controlling the operation of the petrol and LPG injectors operation in the engine of a spark ignition and direct petrol injection, operating in the gas mode with a periodical switch over of the supply type, an example of determining power criterion for the family of vehicles.
Źródło:: Journal of KONES; 2011, 18, 3; 227-235
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 2.

Tytuł:: Lowering of exhaust emission in modern two - stroke engine
Autorzy:: Mitianiec, W.
Rodak, Ł.
Powiązania:: https://bibliotekanauki.pl/articles/246651.pdf
Data publikacji:: 2012
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: transport
experiments
combustion engines
air pollution
Opis:: In the article the results of experimental tests carried out on the modified SI two-stroke experimental combustion engine with direct fuel injection system and the prototype of the oxidizing catalytic converter are presented. Volumetric exhaust emissions of the most important chemical components are many times smaller than standard limits of gaseous emissions given by EU directive for the new stationary engines applied in non-road vehicles and machines Spark ignition two-stroke engine fitted with a catalytic reactor is characterized by high temperature of exhaust gases, which the energy may be used in cogeneration systems. The paper presents the test stand, volumetric concentration of the main components of exhaust gases, results of converted emissions and fuel consumption as a function of air excess coefficient at chosen rotational speeds together with the assessment of the test results. There is decreasing of CO and HC emission during increasing of air excess coefficient and a strong increase of CO2 behind the catalytic converter. Application of catalytic converter in the outflow system together with direct fuel injection of the tested two-stroke engine enables to achieve values of exhaust emission of main toxic chemical components close to automobile four stroke engines. The paper presents also the comparison of exhaust gas emission of this engine with other engines equipped with different fuelling systems. Presented work is the successor of a wide range of research work in the field of development of modern two-stroke engines carried out in the Cracow University of Technology.
Źródło:: Journal of KONES; 2012, 19, 2; 337-344
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 3.

Tytuł:: Marine gas engine marine gas engines application speaking of 6th Marpol Annex
Autorzy:: Wandor, J.
Kończewicz, W.
Wojtaszak, M.
Kamieniecki, M.
Powiązania:: https://bibliotekanauki.pl/articles/241887.pdf
Data publikacji:: 2013
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: combustion engines
air pollution
environmental protection
Opis:: The International Maritime Organization set up a global strategy for reducing emission of sulphur from marine fuels, from 4.5% to 0.5% by the end of the year 2020. In order to such strategy, ship-owners need to fulfil increasing demands according to reduce pollution. New regulations, force ship-owners to reduce production of pollution, but as the devices create to remove some part of pollution are very expensive in use, began to search for cheaper and more effective solutions. The main aim of this article is to present superiority of using gas fuel over liquid fuel on ships. The construction of marine engines, run by a gas fuel is in the scope of interest of scientist’s research during the last couple of years. This branch of technology develops very dynamic recently, according to savings that can be reach while using gas engines on ships. Apart of cost reduction, new types of marine engines are able to cope with more and more restrictive regulations that are published in international convention MARPOL. Such restriction became the reason for the biggest, international corporations, specialists in engines production, to carry on long-term researches on new ways to power ship engines. One of the world’s greatest engine producer is British Rolls-Royce that became pioneer and built the first gas engine. New power unit, Bergen B-gas B35:40V is the one of the most modern type of such engine in the world. The solid construction of this engine was based on engine B32. It became very efficiently because of many rationalizations in maintenance and exploitation. Two main priorities, while developing conception for this model, were minimization of fuel consumption and operating simplification. The authors of these article present advantages of using marine engines powered by gas, according to the international MARPOL regulations that became very restrictive in order to protect marine environment. As the examples were used products of Rolls-Royce Company.
Źródło:: Journal of KONES; 2013, 20, 4; 479-484
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 4.

Tytuł:: Environmental pollution caused by a direct injection engine
Autorzy:: Jankowski, A.
Kowalski, M.
Powiązania:: https://bibliotekanauki.pl/articles/243382.pdf
Data publikacji:: 2015
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: combustion engines
air pollution
environmental protection
Opis:: In the paper, the authors made an analysis of mechanisms of the toxic components formation of exhaust gases in the direct injection engines. The genesis as well as the typical engine construction solution with the use of direct injection in diesel engines and these with positive ignition was developed. The typical construction solution of the Common Rail (CR) system, which is one of many elements increasing the purity of exhaust gases, was also presented. The basic advantages of direct injection, especially in case of the positive ignition engine, were also briefly described. Then, the mechanism for the formation of toxic components of exhaust gases in the direct injection diesel engines was presented. Moreover, the definition and dependency on the indicated mean effective pressure were shown, and the closed indicator graph, which is indispensable to calculate values of this pressure, was also (graphically) presented. In this paper, the mechanisms and processes, with the use of which it is possible to reduce the emission of toxic components of exhaust gases, were quoted. The exhaust gas recirculation with the EGR valve, which allows supplying the exact amount of gases to the engine inlet system, is such an example. The advantages of using this type of solutions were described, and a typical construction solution was presented in the diagram. The paper was completed with a conclusion, which emphasised the importance of direct injection on reducing the emission of toxic components of exhaust gases.
Źródło:: Journal of KONES; 2015, 22, 4; 133-138
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 5.

Tytuł:: Procedures and treatments leading to reduction of toxic components emission in diesel engines exhaust gas
Autorzy:: Kalina, P.
Irzycki, A.
Snopkiewicz, K.
Powiązania:: https://bibliotekanauki.pl/articles/248119.pdf
Data publikacji:: 2012
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: diesel engine
pollution
reduction of emission
Opis:: The fight against global warming and Earth atmosphere pollution has been for years one of the most important tasks of governments and national economies of the European Union members. Abandonment of efforts leading to reduction mainly of carbon dioxide emission by heavy industry, electric power generation based on coal, passenger aviation and wheeled passenger transport will inevitably be leading to deterioration of health condition of our citizens. This article presents an overview of commonly used structural and technological treatments which have impact on reduction of toxic standardized exhaust pollutants in the surface transport, exemplified on SW 400 engine version of L2 / 3 and its turbocharged version 6CT 107 2/L2. The impact of: engine's adjustment parameters, catalytic afterburners, exhaust gas recirculation, modifications of injectors, turbochargers, supercharging air-cooling and particulates filter on carbon monoxide, hydrocarbons, nitrogen oxides and particulates emission was thoroughly examined. The parameters being compared were the results of toxicity tests according to ECE-R49 Regulation and a maximal smoke values on full-load characteristics. In conclusion, of the paper the limiting allowable values of toxic components emitted in Diesel engines exhaust gases in the following EU Emission Standards are presented.
Źródło:: Journal of KONES; 2012, 19, 1; 163-169
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 6.

Tytuł:: Biogas as vehicle fuel
Autorzy:: Papacz, W.
Powiązania:: https://bibliotekanauki.pl/articles/244517.pdf
Data publikacji:: 2011
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: biogas
transport
road transport
air pollution
Opis:: There is growing interest in the use of biogas as a fuel for transport applications. Some of the drivers behind this are the increasing regulation and taxes on waste disposal, an increasing need for renewable fuel sources, the EC’s Biofuels Directive, the proposed Renewable Transport Fuel Obligation (RTFO), measures to improve local air quality and the need for clean transport fuels in urban areas. The aim of this paper is to present the potential role of biogas as a transport fuel. Biogas is produced from the process of anaerobic digestion of wet organic waste, such as cattle and pig slurries, food wastes and grown wet biomass. To be used as a transport fuel biogas has to be upgraded to at least 95% methane by volume and it can then be used in vehicles originally modified to operate on natural gas. Biogas fuelled vehicles can reduce CO2 emissions by between 75% and 200% compared with fossil fuels. The higher figure is for liquid manure as a feedstock and shows a negative carbon dioxide contribution which arises because liquid manure left untreated generates methane emissions, which are 21 times more powerful as a greenhouse gas than CO2. Hence there is a double benefit by reducing fossil emissions from burning diesel and reducing methane emissions from waste manure; Biogas will give lower exhaust emissions than fossil fuels, and so help to improve local air quality. The paper sets out the resource that is available for producing biogas, together with the basic details of production technology. It goes on to explore how this gas can be used in vehicles, describing the basic technology requirements. The energy data and the costs of producing on biogas as a transport fuel are presented.
Źródło:: Journal of KONES; 2011, 18, 1; 403-410
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 7.

Tytuł:: An attempt to reduce the emission of spark-ignition engine with mixtures of bioethanol and gasoline as substitute fuels
Autorzy:: Gis, Wojciech
Gis, Maciej
Wiśniowski, Piotr
Bednarski, Mateusz
Powiązania:: https://bibliotekanauki.pl/articles/247883.pdf
Data publikacji:: 2019
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: simulation
combustion engines
air pollution
environmental protection
Opis:: Limiting emissions of harmful substances is a key task for vehicle manufacturers. Excessive emissions have a negative impact not only on the environment, but also on human life. A significant problem is the emission of nitrogen oxides as well as solid particles, in particular those up to a diameter of 2.5 microns. Carbon dioxide emissions are also a problem. Therefore, work is underway on the use of alternative fuels to power the vehicle engines. The importance of alternative fuels applies to spark ignition engines. The authors of the article have done simulation tests of the Renault K4M 1.6 16v traction engine for emissions for fuels with a volumetric concentration of bioethanol from 10 to 85 percent. The analysis was carried out for mixtures as substitute fuels – without doing any structural changes in the engine's crankshafts. Emission of carbon monoxide, carbon dioxide, hydrocarbons, oxygen at full throttle for selected rotational speeds as well as selected engine performance parameters such as maximum power, torque, hourly and unit fuel consumption were determined. On the basis of the simulation tests performed, the reasonableness of using the tested alternative fuels was determined on the example of the drive unit without affecting its constructions, in terms of e.g. issue. Maximum power, torque, and fuel consumption have also been examined and compared. Thus, the impact of alternative fuels will be determined not only in terms of emissions, but also in terms of impact on the parameters of the power unit.
Źródło:: Journal of KONES; 2019, 26, 3; 31-38
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 8.

Tytuł:: Optical properties of crude oil detected in seawater
Autorzy:: Haule, K.
Toczek, H.
Powiązania:: https://bibliotekanauki.pl/articles/245741.pdf
Data publikacji:: 2014
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: crude oil
marine ecology
fluorescence
seawater
oil pollution
Opis:: The effects of crude oils entering marine environment have been investigated since early 1960s when oil pollution became a subject of global environmental concern. Extraction and transportation of crude oils have been contributing to water pollution especially in closed water basins, such as the Baltic Sea. It was estimated that yearly oil input to the Baltic Sea amounts to 21-70 thousands of tons, which is twice higher than in the North Sea and three times higher than in the North Atlantic. Growing pollution loads into the Baltic Sea created a demand for multifarious studies on the environmental effects of oil products. In this study, we focus on bio-optical and ecological aspects of the presence of crude oil in seawater. Dispersed oil droplets occur in seawater as the result of contaminated river inflows, bilge water discharges and as the consequence of mechanical and chemical dispersion of oil spills. Their optical properties depend on oil type, concentration and size distribution. We present further results obtained from the developed fluorescence-based method for determination of the crude oil concentration in natural Baltic seawater and for evaluation of the oil droplets size by applying vacuum filtering. The results have been measured for the samples collected in Southern Baltic Sea during several ship cruises in 2012. We discuss the application of vacuum filtering in the fluorescence analyses in the context of laboratory, in situ and remote detection of dispersed oil.
Źródło:: Journal of KONES; 2014, 21, 3; 127-132
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 9.

Tytuł:: The European controlling system to reduce oil discharges in the sea
Autorzy:: Otremba, Z.
Powiązania:: https://bibliotekanauki.pl/articles/246642.pdf
Data publikacji:: 2012
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: marine transport
oil pollution detection
satellite surveillance
CleanSeaNet
Opis:: Shiporigin operational discharges of oil mainly include the discharge of bilge water from motor rooms, fuel oil sludge and oily ballast water from fuel tanks. Also, various tankers can illegally discharge of tank-washing residues. Accidental discharges can appear when ship collide or come in distress at sea (e.g. engine breakdown, fire, explosion, pipeline breaks). There is necessity of continuous inspection of marine shipping routes, especially in environmentally sensitive areas (e.g. whole Baltic Sea). If protection against oil pollution is considered - the coastal nations of the North Sea are formed in the Bonn Agreement, whereas coastal nations of the Baltic Sea are formed in the HELCOM convention. Both organizations carrying out the international aerial surveillances and manage international oil-combat systems. Unfortunately, air surveillance can operate mainly in good weather, good visibility and in daylight. The surface of the whole world is observed independently on the time of day and weather by antennas of Synthetic Aperture Radars (SAR) of dozen military satellites with resolution of several meters. Some civil satellites equipped with SAR, supply every few days a set of signals which in ground-based centres are transformed to image of a define area of the sea surface. In these images, the shapes of places, which can be interpreted as polluted by an oil film, are shown. The system is introduced after EU directive and managed by European Maritime Safety Agency (EMSA). EMSA has developed the CleanSeaNet service - a satellite based monitoring system for marine oil spill detection. Advantages and limitations of the SAR-methods are discussed in this study. Physical, meteorological and hydrological as well as organizational conditions for effective use of this system are considered.
Źródło:: Journal of KONES; 2012, 19, 2; 375-381
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 10.

Tytuł:: Fluorescence properties of mechanically dispersed crude oil
Autorzy:: Haule, K.
Toczek, H.
Powiązania:: https://bibliotekanauki.pl/articles/247844.pdf
Data publikacji:: 2014
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: crude oil
marine ecology
fluorescence
seawater
oil pollution
Opis:: Despite of numerous actions undertook by the global and local authorities towards protection of marine environment, oil pollution loads into the Baltic Sea still tend to increase and need to be continuously estimated in order to apply the legal regulations. There is a demand for multifarious studies on the environmental effects of oil products. Dispersed oil droplets occur in seawater as the result of contaminated river inflows, bilge water discharges and as the consequence of mechanical and chemical dispersion of oil spills. Their optical properties depend on oil type, concentration and size distribution. Oil content influences many environmental factors, like water quality and bio-optical parameters (e.g. water-leaving radiance, inherent optical properties, seawater fluorescence). We present a unique study of the collected database of crude oil fluorescence spectra for better understanding the correlations between oil optical properties and its concentration, as well as for evaluation of the oil droplets size by the application of vacuum filtering using three filters of different permeability. Fluorescence spectra have been registered for oil-in-water emulsion samples prepared in the laboratory by mechanical dispersion. We discuss the optical properties of crude oil and the relationships between them in the context of potential remote detection of dispersed oil in seawater.
Źródło:: Journal of KONES; 2014, 21, 4; 161-167
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 11.

Tytuł:: Evaluation of applied provisions and technologies on ship emission and air quality
Autorzy:: Pawlak, M.
Powiązania:: https://bibliotekanauki.pl/articles/243593.pdf
Data publikacji:: 2016
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: transport
exhaust emission
marine engines
air pollution
modelling
Opis:: Although perceived as the most environmentally friendly means of transport, ships are a significant source of pollution to the environment. The vast majority of emissions in EU sea areas are emitted from cargo ships over 500 GT. About 45% of all emissions come from EU flagged ships and approximately 20% of emissions are emitted within the 12-mile limit of territorial seas. In port cities, ship emissions are in many cases a dominant source of pollution and need to be addressed when considering compliance with legally binding air quality objectives. Moreover, emissions from ships travel over hundreds of kilometres and can thus contribute to air quality problems on land even if they are emitted at sea. This is particularly relevant for the deposition of sulphur and nitrogen compounds, which cause acidification of natural ecosystems and threaten biodiversity through excessive nitrogen inputs. Emission of toxic compounds in marine engines exhausts is limited by international legal provisions, namely MARPOL convention, which in Annex VI sets limits to SOx and NOx emissions and designates special areas where the limits are stringent. To comply with the provisions, marine vessels need to be equipped with installations reducing emissions to permissible levels or turn to alternative fuels. The paper presents evaluation of impact of those having been in force for the last decade limitations as well as of applied new technological solutions on improvement of air quality. The analysis was conducted for the Baltic Sea, based on available data on ship traffic in the area and emission factors.
Źródło:: Journal of KONES; 2016, 23, 4; 381-388
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 12.

Tytuł:: Fluorescence of natural seawater exposed to oil pollution
Autorzy:: Otremba, Z.
Baszanowska, E.
Powiązania:: https://bibliotekanauki.pl/articles/245422.pdf
Data publikacji:: 2015
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: marine fleet exploitation
seawater
oil pollution
fluorescence spectroscopy
Opis:: The natural seawater contains both dissolved and suspended organic substances originating from natural sources and human activities – like the marine transport fleet among other. To specify the type and quantity of vitally valid as well as dangerous for properly functioning marine ecosystems substances complicated and sophisticated chemical instrumentation and methodologies must be used. Only a small number of seawater components it is possible easily to determine their concentrations – for example, the salt content is determined directly in the bulk of water through simultaneous measurement of electrolytic conductivity and temperature of water. It is worth to search similarly quick method for oil substances directly in the seawater. Taking into account seawater organic pollutants originating from natural sources inter alia crude oils, the presence of refinery petroleum substances due to their fluorescence in ultra-violet light can be determined based on fluorescence spectroscopy. The aim of this paper is to search fluorescence features of oil substances dissolved in natural seawater based on excitation-emission spectroscopy. In the paper fresh and oily contaminated seawater taken from the coastal area of the Baltic Sea were used. As an oil pollution ‘Petro-baltic’ oil were applied. The natural seawater, at first was laboratory exposed to low extremely amount of oil and then it was examined by fluorescence under UV light. The seawater from vicinity of Gdynia (Poland) were tested as fresh and after artificially contaminated by different amount of oil (from 0.5 to 500 ppm). Spectrofluorometer Hitachi F-7000 FL was applied to measure excitation-emission spectra (EEMs). Low amounts of oil (up to several ppm) cause increasing of main peak in excitation-emission spectra (EEMs). Addition of larger amounts of oil results in appearance new peaks, which originate from fluorescence of soluble fractions of oil artificially added to examined water. These specific features of oil describe the spectroscopic signatures of oil, which is the basis to development operational method of the source of oil pollution identification.
Źródło:: Journal of KONES; 2015, 22, 3; 181-186
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 13.

Tytuł:: Comparison of fluorometric signatures of oil residues in both marine environment and in organic diluent
Autorzy:: Otremba, Z.
Baszanowska, E.
Powiązania:: https://bibliotekanauki.pl/articles/243211.pdf
Data publikacji:: 2015
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: oil pollution
seawater
excitation-emission spectra
fluorescence spectroscopy
Opis:: The significant part of petroleum substances is transferred to the marine environment after technical activities (inevitable exploitive spills, illegal discharges). However a certain part of petroleum in seawater coming from the natural sources. Therefore, to develop the safety of natural marine environment it is necessary to track not only the anthropogenic pollutants but also the natural sources of petroleum. To distinguish both source of oil the fluorescence properties of oil can be used as the tools to oil identification. The aim of the study is to describe the optical properties of crude oil after it contact with aquatic environment based on fluorescence spectroscopy. For the study, crude oil ‘Petrobaltic’ type potentially found in marine environment due to coming from natural source was applied. To dissolve oil, two different solvent – hexane and Baltic seawater form the Gdynia coast were used. To measure the excitation-emission spectra (EEMs) of oil spectrofluorometer Hitachi F-7000 FL was applied. In the paper, we discuss the changes of oil EEMs in two cases for oil dissolved in n-hexane and for oil dissolved in seawater for various oil concentration. Obtained EEMs for oil dissolved in seawater indicate that EEMs spectrum contain the main peak – describing by the wavelength – independent fluorescence maximum, which was detected for oil dissolved in n-hexane (typical for this kind of oil). However, the intensity of oil fluorescence decreases after oil contact with seawater. This approach could allow expanding the description of complex mixtures of oils as a possible tool proposed for identification the type and origin of oil found in marine environment.
Źródło:: Journal of KONES; 2015, 22, 3; 175-179
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 14.

Tytuł:: Evaluation of interior air quality in terms of volatile organic compounds emission inside a new passenger car cabin depending on the temperature
Autorzy:: Skrętowicz, M.
Włostowski, R.
Kozłowski, C.
Powiązania:: https://bibliotekanauki.pl/articles/245967.pdf
Data publikacji:: 2018
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: vehicles
road transport
materials
VOCs
air pollution
car cabin
Opis:: The new passenger car, BMW 225 XE was tested. The results of measurements of concentration of VOCs carried out inside the car cabin depending on the temperature were presented. The investigation was carried out in a special climatic chamber isolated from external factors such as outside air pollutants and weather conditions. The following temperature values have been set: 17ºC, 20ºC, 35ºC and 50ºC. The samples were located inside and outside of the vehicle’s cabin. As expected, the concentrations of each compound increased with increasing temperature (volatility of VOCs increases with the temperature). Values of concentrations obtained in the measurements have been compared with the values of highest acceptable concentration specified in polish law. The article describes the investigation, which was provided in a special climatic chamber. The chamber was isolated from external weather conditions and pollutants. Before each sampling interior of car cabin was ventilated to remove all pollutants from inside. Concentrations of BTX measured in different temperatures were converted to temperature of 20ºC.
Źródło:: Journal of KONES; 2018, 25, 4; 393-398
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 15.

Tytuł:: Dynamic properties of aluminium alloys used in automotive industry
Autorzy:: Moćko, W.
Kowalewski, Z. L.
Powiązania:: https://bibliotekanauki.pl/articles/246638.pdf
Data publikacji:: 2012
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: road transport
simulation
combustion engines
air pollution
environmental protection
Opis:: Around 20 percent of CO2 emitted as a result of human activity on Earth comes from transportation. One of the ideas, which lead to diminishing of the greenhouse gases emission, is reducing of fuel consumption. It may be achieved by introducing a new powertrain solutions as well as lowering overall vehicle weight. The reduction of vehicle weight may be obtained by both a new design of part and structures and application of a new materials i.e. aluminium alloys. It has to be emphasised that weight reduction is very important for combustion engine driven vehicles and electric driven vehicles as well. Mass lowering is especially desirable in the case of electric vehicles because they typically have a very narrow operational range usually lower than 200 km. Therefore even small weight reduction decreases energy consumption of EV and as a consequence increases its range, which is a crucial parameter for users. The results presented in this article were focused on high strength aluminium alloys of 6082-T6 and 7075-T6 types. Applying of those materials enables mass lowering of structures up to 50 percent, maintaining original functionality. Moreover, aluminium alloys may be also used in energy absorbing structures. The goal of tests was to obtain data required in FE analysis. In order to simulate dynamic phenomenon i.e. vehicle crash investigation of the stress-strain curves of alloys were carried out at wide range of strain rates using Hopkinson bar.
Źródło:: Journal of KONES; 2012, 19, 2; 345-351
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Informacja

Wyszukujesz frazę "Pollution" wg kryterium: Temat

Źródło danych

Dostawca treści

Kolekcja

Rok wydania

Wydawca

Temat

Autor

Typ dokumentu

Język