Autor: Lubaś, J. - Katalog OPAC zbiorów

Skocz do pozycji: 1.

Tytuł:: Tribological properties of surface layer with boron
Autorzy:: Lubas, J.
Powiązania:: https://bibliotekanauki.pl/articles/242091.pdf
Data publikacji:: 2009
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: wear
sliding friction
surface treatment
boron
Opis:: The aim of the present work is to determine the influence of technologically produced boron surface layers on the friction parameters in the sliding pairs under the conditions of mixed friction. The tribological evaluation included ion nitrided, pack borided, laser borided, quenched and tempered surface layers and TiB2 coating deposited on 38CrAlMo5-10, 46Cr2 and 30MnB4 steels. Modified surface layers of annular samples were matched under test conditions with counter-sample made from AlSn20 bearing alloy. Tested sliding pairs were lubricated 15 W/40 Lotos mineral engine oil. The tribological tests were conducted on a T-05 block on ring tester. The applied steel surface layer modification with boron allow creating surface layers with pre-determined tribological characteristics reąuired for the elements of kinematic pairs operating in the conditions of sliding friction. Pack boronizing reduces the friction coefficient during the start-up of the frictional pair and the maximum start-up resistance level is similar to the levels of pairs with nitrided surface layers. Paper present comparison between surface roughness of annular sample and countersample before and after test, influence of surface treatment annular sample on change of friction coefficient vs. rotation speed and load, influence of surface treatment annular sample on moment of friction in function load of kinematics pair, influence of surface treatment annular sample on friction forces and temperature depending on load, as well as influence of surface treatment annular sample on wear of AlSn20 bearing alloy under various load conditions.
Źródło:: Journal of KONES; 2009, 16, 3; 213-221
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 2.

Tytuł:: Tribological properties of sliding pairs with surface layer containing boron under mixed friction conditions
Autorzy:: Lubas, J.
Powiązania:: https://bibliotekanauki.pl/articles/242626.pdf
Data publikacji:: 2013
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: surface treatment
wear
sliding friction
boron
bearing alloy
Opis:: The aim of the present work is to determine the influence of surface layers containing boron on the friction parameters in sliding pairs under mixed friction conditions. The tribological evaluation included three production methods of surface layers with boron; pack boronizing, laser boronizing, and TiB2 coating deposited on 46Cr2 steel. Modified surface layers of ring specimens with 46Cr2 steel were matched under test conditions with a counterpart made from AlSn20 bearing alloy. Tested sliding pairs were lubricated with 5W/40 Lotos synthetic engine oil. The applied modification technologies of the surface layer of steel allowed for obtaining construction materials with predetermined tribological characteristics required for the elements of sliding pairs working undermixed friction conditions. The results showed differences in the wear of bearing alloy, as the effect of the interaction between the cooperating surface layers and of the physiochemical changes of their surfaces, induced by external forces. The TiB2 coating generated the highest friction resistance and bearing alloy wear. The pack borided surface layer reduces the friction coefficient, the moment during the start-up of the frictional pair and the wear of the bearing material. The analysis of the surface layer indicated that the content of aluminum on pack borided ring specimens reached 21%, and on the TiB2 coating, it exceeded 8%.
Źródło:: Journal of KONES; 2013, 20, 1; 185-192
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 3.

Tytuł:: Tribological characteristics of the surface layer of steel modified with boron under mixed friction conditions
Autorzy:: Lubas, J.
Powiązania:: https://bibliotekanauki.pl/articles/242290.pdf
Data publikacji:: 2011
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: tribology
surface modification
boron surface layers
AlSn20 bearing alloy
friction coefficient
Opis:: The aim of the present work is to determine the influence of technologically produced boron surface layers on the friction parameters in the sliding pairs under mixed friction conditions. The current boronizing processes allow obtaining surface layers of high hardness and high resistance to corrosion and wear, with low brittleness and no tendencies towards cracking However, the operation characteristics of these layers depend on the chemical composition, the structure of the surface layer, the method and parameters of their production, as well as any possible thermal treatment. The tribological evaluation included ion nitriding, powder-pack boronizing, laser boronizing, hardening and tempering surface layers and TiB2 coating deposited on ring samples. The ring samples were made from 38CrAlMo5-10, 46Cr2 and 30MnB4 steel. Modified surface layers of ring samples were matched under test conditions with counter-sample made from AlSn20 bearing alloy. Tested sliding pairs were lubricated 15W/40 Lotos mineral engine oil. The tribological tests were conducted on a T-05 block on ring tester. The applied steel surface layer modification with boron allow creating surface layers with pre-determined tribological characteristics required for the elements of kinematic sliding pairs operating under mixed friction conditions. Boronizing reduces the friction coefficient during the start-up of the frictional pair and the maximum start-up resistance level is similar to the levels of pairs with ion nitride surface layers.
Źródło:: Journal of KONES; 2011, 18, 2; 271-278
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 4.

Tytuł:: The application of CrN and TiN coatings in slide bearing kinematic coupling pin surface layer modification processes
Autorzy:: Lubas, J.
Powiązania:: https://bibliotekanauki.pl/articles/244165.pdf
Data publikacji:: 2008
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: TiN
CrN
wear
sliding friction
surface treatment
Opis:: This work presents the results of tribological stand tests of slide bearings with pins modified with CrN and TiN coatings and pins with a TiN-steel 46Cr2 and CrN-steel 46Cr2 ,,ring" structure. The ,,rin" structure samples features materials with different tribological properties in the form of rings on the pin slide surface. Such a structure is obtained when covering the 46Cr2 steel pin base with a discrete layer of TiN or CrN, using the PVD method. The stand tests of frictional couplings have been performed for the frictional kinematic coupling pin with modified surface layer and CuPb30 and AlSn20 alloy bearing liner slice. During the tests the tribological couplings were lubricated with Castrol magnatec engine oil (5W/40). The tests were performed on a T-05 tribological tester. The test results demonstrated the tribological advantageous using the "ring" structure samples in the frictional couplings. The tests demonstrated that the friction forces and the bearing material quantity wear were the least for couplings with CrN steel, 46Cr2 and nitrogen hardening, and the largest for TiN pin couplings. Modification of the CrN pin surface layer has a beneficial impact on reducing frictional resistance, and temperature reduction in the friction area as well as reduction in bearing alloy wear.
Źródło:: Journal of KONES; 2008, 15, 2; 263-267
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Informacja

Wyszukujesz frazę "Lubaś, J." wg kryterium: Autor

Źródło danych

Dostawca treści

Kolekcja

Rok wydania

Wydawca

Temat

Autor

Typ dokumentu

Język