Wszystkie pola: internal motion resistance - Katalog OPAC zbiorów

Skocz do pozycji: 1.

Tytuł:: Energy efficiency of rubber tracked chassis
Autorzy:: Dudziński, P.
Chołodowski, J.
Powiązania:: https://bibliotekanauki.pl/articles/246674.pdf
Data publikacji:: 2016
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: trackled vehicle
rubber track
rubbert belt
motion resistance
internal motion resistance
energy-efficiency
tractive efficiency
Opis:: Nowadays, increasing number of machines and off-road vehicles are equipped with elastomeric, mainly rubber, tracked chassis. Rubber tracks and belts combine the most important advantages of both: pneumatic tires and conventional tracks made from metal links. In spite of significant benefits, rubber tracked chassis is a novel and uncommon design solution, as the application of rubber tracks and belts still brings up many severe problems. Consequently, an urgent need to overcome these problems exists. In The Division of Off-Road Machine and Vehicle Engineering (DORMVE) an intensive research, pertaining to rubber-tracked chassis has been conducted for many years. In the very beginnings, the investigation was carried on in cooperation with German companies INTERTRACTOR, IAMT and IBAF. As a result, numerous original and innovative design solutions, which became a subject of European, American and Japanese patents, were developed. However, some issues have not yet been resolved. Present research of DORMVE is aimed at identification of problems concerning energy efficiency of rubber-tracked chassis. The main objective of current investigation is to improve the energy efficiency. To do so a comprehensive optimisation process is to be carried out. Within the following article, a classification of aforementioned problems will be discussed. Research facilities in laboratory of DORMVE and exemplary results, which have already been obtained, will be also presented.
Źródło:: Journal of KONES; 2016, 23, 2; 97-104
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 2.

Tytuł:: Comparing the resistance to motion of pistons coated with a layer of nanotubes with standard pistons
Autorzy:: Iskra, A.
Babiak, M.
Kałużny, J.
Giersig, M.
Kempa, K.
Powiązania:: https://bibliotekanauki.pl/articles/247841.pdf
Data publikacji:: 2012
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: friction in internal combustion engine
nanotubes layers
Opis:: The paper presents preliminary results of testing the resistance to motion of pistons coated with a layer of carbon nanotubes (CNTs). A significant part of this paper was devoted to the problems of putting a layer of nanotubes on the surface of an aluminum alloy. Obtaining a layer of nanotubes of a very narrow margin of tolerance was a difficult technological problem to overcome. A standard process of growing a layer of nanotubes leads to a corrosion damage of the side surface of pistons; therefore, new technologies were developed allowing for obtaining a permanent layer of nanotubes less than 5 microns thick. Pistons whose side surfaces were coated with a layer of nanotubes were mounted to an engine with an external drive, and then measurements of the moment of momentary resistance to motion were performed, which enables capturing these phases of the engine work cycles in which the layer of nanotubes gives the best results. At present, long-term research is being carried out in order to determine the degree of the risk of exfoliation of the layer of nanotubes under the conditions of large mechanical and thermal loads. The special nanotechnology method cold nanosphere lithography has been invested to control the structural properties sand growth of multiwalled carbon nanotubes. The preliminary analysis of dismantled pistons revealed that nanotubes layers were partially worn off at the peaks of micro roughness but in the valleys, the nanotubes accurately adhered to the piston lateral surface.
Źródło:: Journal of KONES; 2012, 19, 2; 227-233
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Informacja

Wyszukujesz frazę "internal motion resistance" wg kryterium: Wszystkie pola

Źródło danych

Dostawca treści

Kolekcja

Rok wydania

Wydawca

Temat

Autor

Typ dokumentu

Język