Wszystkie pola: Sławiński, J. - Katalog OPAC zbiorów

Skocz do pozycji: 1.

Tytuł:: Riveting process simulation - upsetting of the mushroom rivet
Autorzy:: Szymczyk, E.
Jachimowicz, J.
Sławiński, G.
Powiązania:: https://bibliotekanauki.pl/articles/244023.pdf
Data publikacji:: 2008
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: riveted joint
mushroom rivet
FEM local model
stress and strain fields
Źródło:: Journal of KONES; 2008, 15, 2; 493-502
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 2.

Tytuł:: Dilatometric researches of novel alloy for combustion engine pistons
Autorzy:: Żurek, J.
Slawinski, Z.
Jankowski, A.
Powiązania:: https://bibliotekanauki.pl/articles/243032.pdf
Data publikacji:: 2016
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: combustion engine piston
composite alloy
piston sample elongation
hysteresis
piston clearance
Opis:: The article presents dilatometric research results of composite alloy (in-situ) for combustion engines piston. Researches were performed with a precise dilatometer. Alloy's research test stand and test results including relative elongation, course of derivative of dimension increasing versus time with phase transition and course of coefficient of linear thermal expansion α for composite alloy versus temperature are presented in the article. Novel composite alloy allows getting a minimum difference of the coefficient of linear thermal expansion α during heating and cooling. In particular, the chemical composition of the novel composite silumin alloys; ATD of standard alloy – silumin Ak12 and novel composite alloy; schema of research stand and view of the measuring-head of the extension; course of the coefficient of linear thermal expansion α versus temperature during heating and cooling for the standard alloy and novel composite alloy; course of the relative piston elongation ΔL/Lo versus temperature during heating and cooling for the standard alloy and novel composite alloy; course of the derived function of the extension in relation to time dL/dt versus temperature for the standard alloy on pistons and novel composite alloy; course of the relative elongation in function of time during ageing of composite alloy at the temperature of 200°C with two-stage ageing process; course of the relative elongation in function of time during ageing of composite alloy at the temperature of 200°C for the first stage and second stage are presented in the article.
Źródło:: Journal of KONES; 2016, 23, 3; 585-596
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 3.

Tytuł:: Numerical study of the influence of shape imperfections on residual stress fields in a rivet hole
Autorzy:: Sławiński, G.
Niezgoda, T.
Szymczyk, E.
Jachimowicz, J.
Powiązania:: https://bibliotekanauki.pl/articles/246398.pdf
Data publikacji:: 2010
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: FEM
riveted joints
imperfections
residual stress
Opis:: The paper deals with the numerical analysis on residua! stress and strain fields in a rivet hole. This stage of study concerns improving of the fatigue performance of riveted joints in an airframe. Riveting, particularly in aviation, is a traditional but still commonly used method of joining sheet metal components. Aircraft structures are thin-walled ones, with coverings made of thin sheets stiffened by stringers, frames or ribs. Sheets are typically assembled by a multiple rivet or bolt joints. Rivets and bolts are also used to joint sheets and stiffeners. Therefore, fatigue resistance of the aircraft structure depends on tens of thousands or even hundreds of thousands r ivet joints, which are used to build it. The local numerical models of the joint are considered with regard to the aim introduced in the paper. Numerical FE simulations of an upsetting process are carried out using the LS-DYNA code. Three-dimensional numerical models are used to determine the resulting stress and strain fields at the mushroom rivet and around the hole. This type of problem requires the use of contact between the elements assembled and non-linear geometrie and elasto-plastic multilinear materiał models to simulate the behaviour of the rivet and sheets. The influence of shape imperfection on strain and stress states is studied.
Źródło:: Journal of KONES; 2010, 17, 2; 427-434
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 4.

Tytuł:: Comparison of the dynamic riveting process of a rivet with and without a compensator
Autorzy:: Szymczyk, E.
Slawinski, G.
Jachimowicz, J.
Derewonko, A.
Powiązania:: https://bibliotekanauki.pl/articles/245374.pdf
Data publikacji:: 2009
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: riveted joint
mushroom rivet
FEM local model
deformation fields
Opis:: The paper deals with the analysis of deformation of a rivet hole in a riveted joint after the manual dynamic riveting process. For many years, riveting remains a traditional and the most popular method ofjoining in aircraft structures. The residual stress and strain state appear at the rivet hole after the riveting process, which improves the joint's fatigue behaviour. The local finite element models are made with Patran. The rivet and sheets are described using eight-noded, three-dimensional brick elements. The riveting tools consist of four-noded, two-dimensional shell elements. Numerical FE simulations of the upsetting process are carried out using the Ls-Dyna code. The contact with friction is defined between the collaborating parts of the specimen. The results of simulations of the dynamic riveting process of a mushroom rivet with and without a compensator are compared in this paper. Hole deformation of the upper and lower sheet, squeezing force, as well as deformations of the rivet head are analysed. The influence of the compensator on strain and displacement states is studied. Simulation shows that some technological factors may have positive influence on the residual stress fields. Using the rivet with a compensator results in a better rivet hole filling capability. The rivet hole displacement in upper and lower sheets are at the same level. Paper also present manual dynamic riveting process of reverse and standard riveting procedure and model of riveted specimen.
Źródło:: Journal of KONES; 2009, 16, 4; 455-462
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 5.

Tytuł:: Comparison of the dynamic riveting process of a rivet with and without a compensator
Autorzy:: Szymczyk, E.
Slawinski, G.
Jachimowicz, J.
Derewonko, A.
Powiązania:: https://bibliotekanauki.pl/articles/245575.pdf
Data publikacji:: 2009
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: riveted joint
mushroom rivet
FEM local model
deformation fields
Opis:: The paper deals with the analysis of deformation of a rivet hole in a riveted joint after the manual dynamic riveting process. For many years, riveting remains a traditional and the most popular method of joining in aircraft structures. The residual stress and strain state appear at the rivet hole after the riveting process, which improves the joint's fatigue behaviour. The local finite element models are made with Patron. The rivet and sheets are described using eight-noded, three-dimensional brick elements. The riveting tools consist of four-noded, two-dimensional shell elements. Numerical FE simulations of the upsetting process are carried out using the Ls-Dyna code. The contact with friction is defined between the collaborating parts of the specimen. The results of simulations of the dynamic riveting process of a mushroom rivet with and without a compensator are compared in this paper. Hole deformation of the upper and lower sheet, squeezing force, as well as deformations of the rivet head are analysed. The influence of the compensator on strain and displacement states is studied. Simulation shows that some technological factors may have positive influence on the residual stress fields. Using the rivet with a compensator results in a better rivet hole filling capability. The rivet hole displacement in upper and lower sheets are at the same level. Paper also present manual dynamic riveting process ofreverse and standard riveting procedure and model of riveted specimen.
Źródło:: Journal of KONES; 2009, 16, 3; 415-422
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Informacja

Wyszukujesz frazę "Sławiński, J." wg kryterium: Wszystkie pola

Źródło danych

Dostawca treści

Kolekcja

Rok wydania

Wydawca

Temat

Autor

Typ dokumentu

Język