Temat: test bench - Katalog OPAC zbiorów

Skocz do pozycji: 1.

Tytuł:: Analysis of the procedure of evaluation of the technical condition of a high-pressure common rail fuel pump using a test bed
Autorzy:: Bor, M.
Idzior, M.
Karpiuk, W.
Smolec, R.
Powiązania:: https://bibliotekanauki.pl/articles/243763.pdf
Data publikacji:: 2018
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: common rail
test bench
diagnostic
Opis:: Piston displacement pumps use in common rail fuel injection systems generates very high pressure, reaching even 300 MPa. Maintaining such a high pressure is possible thanks to very precise machining resulting in as little clearance between the piston-cylinder assemblies. Due to very high forces operating in the systems and relatively unfavourable lubrication conditions resulting from using fuel as lubricants, the pumps are subject to wear and consequently lose their operating parameters. The high cost of production of the pumps, resulting from their technological advancement, forced their manufacturers to introduce technologies for diagnosing and regenerating them. The diagnostics consists in removing the pump from the engine and having it verified using a test bed. The first stage consists of evaluating the pump’s flow at null pressure; follow by evaluation of its maximal delivery for the pressure of 100 MPa. The obtained values are compared to the values achieved by a new pump. The effect of negative evaluation on a test bed is the disassembly of the pump, verification of the condition of its parts and replacement of the damaged elements. The authors examined new and used pumps on a tested, aiming to determine the characteristics of delivery of a pump for various pressures. The objective of the research was to identify the actual points in the pump’s operation at which the delivery drops the most due to the wear. The highest difference in delivery was found to exist for the maximal compression pressure. The obtained results were analysed and the possibility of changing the pump diagnostics procedure with the use of a test bed was determined.
Źródło:: Journal of KONES; 2018, 25, 3; 65-70
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 2.

Tytuł:: The new stand for aging of biocomponents and biofuels process testing at relatively short time
Autorzy:: Dzięgielewski, W.
Kaźmierczak, U.
Kulczycki, A.
Okniński, R.
Stefanowicz, P.
Powiązania:: https://bibliotekanauki.pl/articles/949517.pdf
Data publikacji:: 2016
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: biofuels
biocomponents
ageing process
test bench
method of measuring
Opis:: In the paper, the concept of a model bench for accelerated ageing of bio-components and biofuels was presented. It is used to simulate the ageing process of biofuels and components of vegetable or animal origin, taking place during storage in the storage tanks. The construction of the bench’s essential elements and its equipment were designed and implemented in such a way as to mostly reflect actual storage conditions in large capacity tanks. An additional and unprecedented function of the bench includes the possibility to simulate the product transport conditions. Furthermore, a method of the test, with the use of simultaneously performed traditional tests on the physical and chemical properties monitored in the process of storage was presented. An analysis of the relation between values of the parameters obtained with different methods (on the model bench and under laboratory conditions) was conducted. In addition, their usefulness to assess the impact of logistic processes on the product quality was presented. In the paper, the results of the work executed within the framework of the project “Development of a prototype of the monitoring system the ageing rate and degree of bio-components and biofuels” within the Program Innovative Economy Operational Programme, Measure 1.4. “Support for goal-oriented projects” were used.
Źródło:: Journal of KONES; 2016, 23, 2; 105-112
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 3.

Tytuł:: Preliminary analysis of vibration signal test results registered at bench test stand of amv rosomak driving axis
Autorzy:: Walentynowicz, J.
Trawiński, G.
Dyga, G.
Polak, F.
Boruta, G.
Powiązania:: https://bibliotekanauki.pl/articles/242851.pdf
Data publikacji:: 2013
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: differential axle gears
test bench
vibration of elements
vibration analysis
Opis:: The methodology of measuring the vibration signal recorded on the casing of wheeled armoured vehicle ROSOMAK driving axis is presented. The study was performed on a test bench for different transmission conditions. A preliminary analysis of the frequency spectra vibration signals recorded. The test stand allows investigation of the differential axle gears under load similar to load during duty operation. It was possible by using the combustion engine and gearboxes and load transmission by using the dynamometer break. Have been described. Three methods of attaching acceleration sensors to differential gears: using screws, magnetic washers and probe handle. The results of comparisons of measurement results obtained using these methods. Finally, the sensors was mount by using the screw connections. Selected positions and points of temperature and vibration measures were described. Values of characteristic frequencies of differential axle gears vibration by moving the drive torque through these boxes were calculated. The spectra of the vibration signal determined during testing gearboxes were shown. It was state that of amplitude-frequency vibration spectra of signals recorded at selected points of differential axle gears casing are clearly visible characteristic frequencies but the vibration the bridge gear unit bridges distorted by vibration of the internal combustion engine and gearboxes. In a further stage of research should be included much larger number of the driving axis differentials investigated in various states of well-known technical conditions and should be lead accord to requirements of the active diagnostic experiment.
Źródło:: Journal of KONES; 2013, 20, 3; 419-426
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 4.

Tytuł:: Vibration isolators test bench
Autorzy:: Pobedin, A.
Kosov, O.
Shekhovtsov, K.
Powiązania:: https://bibliotekanauki.pl/articles/244493.pdf
Data publikacji:: 2011
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: vibration isolator
test bench
vehicle cabin
suspension
testing
elastic and damping characteristic
Opis:: The description of the scheme and design of the test bench for testing vibration isolators intended for use in the vehicle's cabin suspension. Test bench construction allows to implement a wide range of loadings on vibration isolator of the vehicle cabin, to investigate the impact of the loading's arm changing and to perform analysis of the vibration isolator’s elastic and damping characteristics changing impact on cushioning quality. Variant of the test bench construction modernization, which can allow applying typical exploitation loads, which include vertical and lateral components, is described. We propose a scheme of forced oscillations excitation system on the test bench by cam-eccentric mechanism. It includes a DC motor with stepless frequency regulation and with cams of different shape on its shaft, which affect the contact surface of the test bench's vertical H-beam of a rocker arm. We also propose a scheme of forced oscillations excitation system on the test bench by inertial exciter. It includes a DC motor with stepless frequency regulation with inertial vibration exciter on its shaft, which consists of a mass, placed eccentrically relative to the shaft axis. There are two variants of the test bench scheme – with the forced oscillations excitation device and without it.
Źródło:: Journal of KONES; 2011, 18, 1; 457-462
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Informacja

Wyszukujesz frazę "test bench" wg kryterium: Temat

Źródło danych

Dostawca treści

Kolekcja

Rok wydania

Wydawca

Temat

Autor

Typ dokumentu

Język