Temat: Diesel engine - Katalog OPAC zbiorów

Skocz do pozycji: 1.

Tytuł:: The total NOx emission control possibility in modern large bore, slow speed marine engines
Autorzy:: Borkowski, T.
Powiązania:: https://bibliotekanauki.pl/articles/246219.pdf
Data publikacji:: 2008
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: marine diesel engine
injection assembly
exhaust emission
Opis:: The common demands for environmental protection in shipping are being recognized by IMO, through development of the rules with respect to SOx and NOx. This paper investigates the results of fuel injection variables, affecting cylinder process performance and exhaust gas emission. The effect of injection assembly design attributed on NO emission was estimated. The similar slow speed, large bore MAN B&W engines performance were compared. The main factors used for evaluation were: fuel consumption, rotational speed, mean and maximum in-cylinder pressures and total concentrations of NOx, CO2, O2i CO, and HC. The engines performance and NO emission were compared with conventional 6S60MC-C and latest — electronically controlled 7S60ME-C. The CFD simulation of combustion and pollutant formation was created to represent processes of a marine large bore engine. The SMC-C engine operation and standard injection nozzle design was taken as a baseline for comparison with measured NO concentration. The predicted cylinder pressures showed reasonable agreement with experimental measurements. The predictive ability of used CFD simulation package was found to be quantitatively insufficient in terms of NOx emission. However, the predicted NO emission exhibits similar sensitivity with experiment results. The quantitative set of reference data for the validation of simulation results needs to be substantially improved. The determination offuel injection and cylinder pressure history can be identified as the most important source of inaccuracy. Finally, weighted NOx specific emission factor for both engines shows close value, sufficiently placed against IMO limit presented in Fig. 11. The results are promising and show that controlled combustion process is capable of fulfilling present and future NOx emission requirements. Modern marine engines are designed with adjustable components to allow the engine to be adjusted for maximum efficiency or NOx weighted emission factor when used in particular application.
Źródło:: Journal of KONES; 2008, 15, 2; 21-28
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 2.

Tytuł:: Assessment of ships engine effective power, fuel consumption and emission using the vessel speed
Autorzy:: Borkowski, T.
Kasyk, L.
Kowalak, P.
Powiązania:: https://bibliotekanauki.pl/articles/247151.pdf
Data publikacji:: 2011
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: ships
main propulsion
marine diesel engine
exhaust emission
Opis:: Currently, the Baltic Sea States suggests a proposal to designate the Baltic Sea as an Emission Control Area for nitrogen oxides, in accordance with Annex VI of MARPOL73/78. The emission would be estimated on the data produced by the AIS (Automatic Identification System) system that is compulsory for ships. Therefore, exhaust emission of the ships' can be computed using the actual speed and main propulsion shaft power. Mostly, main propulsion engines' exhaust emission is dependent to realistic performance and can be determined. The research plan has been prepared, aimed an evaluating the main propulsion engine performance and emissions. In cooperation with the ship owner, the experimental program onboard the container vessel, equipped with latest large bore, two-stroke, and slow speed MAN B&W electronic controlled engine was carried out. The records set of vessel speed and related engine shaft power, fuel consumption and exhaust emission for container vessel is formed. Taking into account; main engine performance, types of fuel and other input data, the emission factors were determined for ship sea service state. Main engine shaft power estimation and measurement setup, examples of main engine shaft power, the shaft power equation coefficients density, example of main engine service operation, fuel oil consumption group, the ship speed estimated form, example of main engine area operation influenced by weather conditions are presented in the paper.
Źródło:: Journal of KONES; 2011, 18, 2; 31-39
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 3.

Tytuł:: Marine engine exhaust gas emission aftertreatment system concept
Autorzy:: Myśków, J.
Borkowski, T.
Bludszuweit, M.
Frohlingsdorf, W.
Powiązania:: https://bibliotekanauki.pl/articles/247178.pdf
Data publikacji:: 2011
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: marine diesel engine
exhaust emission
particulate matter
non-thermal plasma reactor
Opis:: In 2008 the International Maritime Organization - IMO decided to strengthen the requirements for new ships from 2011 - Tier II. However, for Emission Control Areas (ECAs), such as the Baltic Sea, stringent rules will apply from 1 January 2016 for new ships - Tier III. The new standards introduce restrictions on exhaust emissions from diesel engines - NOx and SOx. The paper presents proposal of new design an existing exhaust gas system of experimental marine diesel engine, which is situated in the Laboratory of Maritime Academy in Szczecin. The conception is due to meet to new environmental regulations. Arrangements of exhaust line, CFD model of the SCR reference plant, CFD model - inlet and outlet boundary conditions, pressure loss model for the catalytic elements, simulation results - streamlines, velocity distribution, reaction progress distribution ate presented in the paper as well design description of system of laboratory- 4-stroke and turbocharged engine. . The means of the reduction systems are based on conventional marine exhaust gas installation that includes noise silencer and soot-catcher. The after-treatment methods do not introduce significant changes in engine arrangement and operation. A new gas purifying system should be installed in the engine exhaust gas system.
Źródło:: Journal of KONES; 2011, 18, 4; 307-315
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 4.

Tytuł:: Direct application of non-thermal plasma to PM reduction from marine diesel engines
Autorzy:: Myśków, J.
Borkowski, T.
Powiązania:: https://bibliotekanauki.pl/articles/242305.pdf
Data publikacji:: 2009
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: marine diesel engine
exhaust emission
particulate matter
non-thermal plasma reactor
Opis:: This paper describes the experimental method - using non-thermal plasma reactor to cleaning exhaust gases - focused on PM compound. The demonstrator NTP reactor assembly was built as the by-pass in the real exhaust gas after-treatment system, in marine diesel engine. The reactor used to experiment is called - DBD (dielectric barrier discharge) type, The main aim of investigation was to analyze exhaust gas PM compounds under steady load of the engine. Test bench construction enables direct exhaust stream (main exhaust duet by-pass) to plasma reactor exposure with no additional components (coolers, orifices) that can change the exhaust gas properties. A new monitoring PM analyzing system, which can measure soot and SOF in low mass level, has been engaged. It consist of a diffusion charging (DC) detector with a dilution device for soot measurement, and two differential flame ionization detection (FID) method, which uses two FID detectors with separate sample lines. Exhaust emission reduction strategy for ships, Particulate Matters - PM in exhaust gas, non-thermal plasma reactor, experimental test bed and procedure, an example of reactor power measurement, test results provided into seven stages are presented in the paper.
Źródło:: Journal of KONES; 2009, 16, 2; 361-367
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 5.

Tytuł:: „Shore to ship” system - an alternative electric power supply in port
Autorzy:: Borkowski, T.
Tarnapowicz, D.
Powiązania:: https://bibliotekanauki.pl/articles/246496.pdf
Data publikacji:: 2012
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: alternative marine power
electric shore-side supply
auxiliary diesel engine
exhaust emission
Opis:: Greater interdependence and integration among the countries worldwide have resulted in the growth of the world trade and, what follows, marine transportation. In the last few years, despite the world economic stagnation, the number of ships has increased. An increase in the marine transportation means greater air pollution caused by ships, what is of paramount importance for the port cities. One of the efficient ways of limiting the negative impact of ships lying in ports on the environment is the power supply from the local electricity stations. This will allow for turning marine power generating systems off, what will result in the emission elimination in the ship’s mooring time along with the decrease of noise and vibrations. The infrastructure of the port electric installation necessary for the ships’ supply has to be designed so as to make the operating of different ship types possible. It is complicated as all over the world ships are equipped with different electric systems. The paper deals with general issues related to common nominal voltages and frequencies for vessels which call in European harbours and their estimated power demands. Additionally, a case study of a ferry vessel, currently undergoing retrofitting for shore connections, is presented and some particulars concerning technical solutions and environmental profits are described.
Źródło:: Journal of KONES; 2012, 19, 3; 49-58
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 6.

Tytuł:: Exhaust emission features of variable compression ratio (VCR) diesel engine
Autorzy:: Woś, P.
Kuszewski, H.
Ustrzycki, A.
Powiązania:: https://bibliotekanauki.pl/articles/247640.pdf
Data publikacji:: 2010
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: diesel engine
compression ratio
variable compression ratio VCR
exhaust emission
toxic compounds
Opis:: One of the important design parameters for internal combustion engines is the geometric compression ratio epsilon. It is defined by the ratio of the maximum volume of the combustion chamber Vmax at the bottom dead centre (BDC) piston position and a minimum volume of the combustion chamber Vmin at the top dead centre (TDC) piston position. Conventional engines have this parameter set unchangeable, what is not the solution ensuring optimal benefits coming from the heat release in the combustion process, especially under altering conditions of load and speed in which they perform powering the road vehicles. It is reflected mainly in exhaust emission problem. Despite a considerable progress, further improving the ecological and energetic performances of the piston engines faces severe system limits, elimination of which requires major changes in engine design, including conversion the fixed compression ratio into the flexible one. For such innovative engine designs with so-called variable compression ratio VCR feature the geometric compression ratio parameter is as the one of the operation regulators. Due to the new development prospect the paper scope is an analysis and showing some results for the impact of compression ratio on the emissions of selected exhaust harmful components for a direct injection diesel engine. The schematics and prototype solutions for VCR technology are briefly presented too.
Źródło:: Journal of KONES; 2010, 17, 3; 521-526
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 7.

Tytuł:: Energy efficiency design index of container vessel - operational approach
Autorzy:: Borkowski, T.
Kasyk, L.
Kowalak, P.
Powiązania:: https://bibliotekanauki.pl/articles/241715.pdf
Data publikacji:: 2012
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: ship
main propulsion
marine diesel engine
Energy Efficiency Design Index
exhaust emission
Opis:: The ship "Energy Efficiency Design Index (EEDI)" has been formulated by the IMO Marine Environment Protection Committee (MEPC) as a measure of the CO2 emission performance of ships. The ship EEDI is calculated based on characteristics of the ship at build, incorporating parameters including ship capacity, engine power and fuel consumption. Shipping is responsible for CO2 discharge of approximately 3.3% global emission and despite being an energy-efficient transport means, compared with other transport modes, there are opportunities for increasing energy efficiency. The EEDI requires a minimum energy efficiency level (CO2 emissions) per capacity mile (e.g. tonne mile) for different ship type and size sectors. With the level being tightened over time, the EEDI will stimulate continued technical development of all the components influencing the energy efficiency of a ship. The paper presents an overview of EEDI calculation method for container vessels and results of experimental approach. The experimental process results through comprehensive analysis of operational data, from modern container vessel, equipped with direct main propulsion unit have been introduced. Ship operators have already been implementing energy efficiency operational measures and set goals for reducing the energy consumption of their fleet. Performance and savings are not always monitored and reported. However, it can be foreseen that such activity when is successfully promoted, reduction of CO2 emissions can be achieved.
Źródło:: Journal of KONES; 2012, 19, 4; 93-100
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 8.

Tytuł:: The effect of methanol-diesel combustion on performance and emissions of a direct injection diesel engine
Autorzy:: Tutak, W.
Szwaja, S.
Powiązania:: https://bibliotekanauki.pl/articles/241919.pdf
Data publikacji:: 2015
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: dual-fuel engine
exhaust emission
modelling
diesel
Opis:: The results of CFD modelling a dual fuel diesel engine powered with both methanol and diesel fuel is presented in the paper. Modelling was performed with 20 and a 50% energetic share of methanol in the entire dose. The analysis was conducted on both the thermodynamic parameters and exhaust toxicity of dual fuel engine. It was found that the various share of methanol influences the ignition delay of the combustion process and after start of main phase of combustion, the process occurs faster than in case of the diesel engine. It was found that the time of 10-90% burn of the fuel is much shorter than it is in the diesel engine. The dual fuel engine was characterized by higher indicated mean pressure in the whole range of diesel fuel injection timings. While analysing toxic exhaust emission from the dual fuel engine powered with methanol, it was found that the rate of NO formation was significantly higher than from the diesel engine. The combustion process in the dual fuel engine occurs more rapidly than in the conventional diesel engine, which contributes to form areas with high temperature, and in combination with presence of oxygen from the air and oxygen bonded in the methanol, promotes the NO formation. In the case of the dual fuel engine, it was found that soot emission was reduced. The engine running with diesel injection start at 8.5 deg before TDC, the soot emissions were more than twice lower in the dual fuel engine, while the emission of NO was much higher.
Źródło:: Journal of KONES; 2015, 22, 2; 259-266
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Informacja

Wyszukujesz frazę "Diesel engine" wg kryterium: Temat

Źródło danych

Dostawca treści

Kolekcja

Rok wydania

Wydawca

Temat

Autor

Typ dokumentu

Język