Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Upadek" wg kryterium: Temat


Wyświetlanie 1-14 z 14
Tytuł:
Fall Protection Incentives in the Construction Industry : Literature Review and Field Study
Autorzy:
Winn, G. L.
Seaman, B.
Baldwin, J. C.
Powiązania:
https://bibliotekanauki.pl/articles/90427.pdf
Data publikacji:
2004
Wydawca:
Centralny Instytut Ochrony Pracy
Tematy:
fall protection
construction
incentives
field test
budownictwo
upadek z wysokości
zachowanie a wypadki
Opis:
Safety literature confirms that incentives such as money or sunglasses seem to improve safety conditions over the short run. However, no studies could be found which tested the effect of incentives on fall protection for a period longer than a few days. In our research we found that after 6 months, the use of non-material incentives significantly improved on-time delivery and completion rates of a special inspection form (both p < .005). In addition, a questionnaire with embedded critical questions showed that even though workers said that they preferred material incentives, we conclude that their behavior was changed by the treatment (incentives). We further conclude that the use of natural reinforcers seems to influence worker behaviors and perception of management's commitment to safety over the long run, even though workers still say that they prefer tangible rewards. Future work should replicate these findings and explore why workers respond to natural incentives but express a preference for material incentives.
Źródło:
International Journal of Occupational Safety and Ergonomics; 2004, 10, 1; 5-11
1080-3548
Pojawia się w:
International Journal of Occupational Safety and Ergonomics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Friction Between Footwear and Floor Covered With Solid Particles Under Dry and Wet Conditions
Autorzy:
Li, K. W.
Meng, F.
Zhang, W.
Powiązania:
https://bibliotekanauki.pl/articles/90294.pdf
Data publikacji:
2014
Wydawca:
Centralny Instytut Ochrony Pracy
Tematy:
slip & fall
friction measurement
solid contaminants
Brungraber Mark II
upadek
tarcie
podłoga
obuwie
Opis:
Solid particles on the floor, both dry and wet, are common but their effects on the friction on the floor were seldom discussed in the literature. In this study, friction measurements were conducted to test the effects of particle size of solid contaminants on the friction coefficient on the floor under footwear, floor, and surface conditions. The results supported the hypothesis that particle size of solids affected the friction coefficient and the effects depended on footwear, floor, and surface conditions. On dry surfaces, solid particles resulted in friction loss when the Neolite footwear pad was used. On the other hand, solid particles provided additional friction when measured with the ethylene vinyl acetate (EVA) footwear pad. On wet surfaces, introducing solid particles made the floors more slip-resistant and such effects depended on particle size. This study provides information for better understanding of the mechanism of slipping when solid contaminants are present.
Źródło:
International Journal of Occupational Safety and Ergonomics; 2014, 20, 1; 43-53
1080-3548
Pojawia się w:
International Journal of Occupational Safety and Ergonomics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Bezwładne masy kotwiczące
Deadweight
Autorzy:
Baszczyński, K.
Zrobek, Z
Powiązania:
https://bibliotekanauki.pl/articles/181203.pdf
Data publikacji:
2001
Wydawca:
Centralny Instytut Ochrony Pracy
Tematy:
praca na wysokości
środki ochrony indywidualnej
upadek z wysokości
work at heights
personal protective equipment
falls from a height
Opis:
Bezwładne masy kotwiczące są urządzeniami przeznaczonymi do ochrony przed upadkiem z wysokości. Umożliwiają zamocowanie indywidualnego systemu ochronnego, w miejscach, gdzie brak jest odpowiednich do tego celu elementów konstrukcji stałej. Na skuteczne powstrzymywanie spadania człowieka przez tego typu urządzenie kotwiczące ma wpływ zarówno tarcie „masy” o podłoże, jak i pochłanianie energii zachodzące wewnątrz jej konstrukcji.
A deadweight is a device designed for protecting against falls from a height. It makes anchoring a personal protective system possible in places without anchor points that are part of the original structure. The efficiency of fall arresting with a protective system with such an anchor device depends on both the friction of the deadweight against the surface of the structure and the energy absorbed inside the deadweight.
Źródło:
Bezpieczeństwo Pracy : nauka i praktyka; 2001, 3; 21-23
0137-7043
Pojawia się w:
Bezpieczeństwo Pracy : nauka i praktyka
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effects of Diabetic Neuropathy on Body Sway and Slip Perturbation Detection in Older Population
Autorzy:
Kim, B. J.
Robinson, C. J.
Powiązania:
https://bibliotekanauki.pl/articles/90072.pdf
Data publikacji:
2006
Wydawca:
Centralny Instytut Ochrony Pracy
Tematy:
sway
slip
perturbation detection
center of pressure
zagrożenia zdrowia
starsi pracownicy
śliska podłoga
upadek
poślizgnięcie
zaburzenia postawy
neuropatia diabetyczna
diabetyk
Opis:
Postural control is a common mechanism to compensate for unexpected displacements of the body. In the older population, a slip or fall due to a failure of postural control is a common cause of morbidity and mortality. The ability of postural control decreases with aging or neuropathy. In this study, 2 groups, diabetics and non-diabetics in the older population, were compared to determine how patterns of postural sway during quiet standing were related to the detection of perturbation. The SLIP-FALLS system was applied to the measurement of sway and detection of perturbation. In phase 1 of the development of the predictive model, neural network algorithms were applied to find determinant variables for perturbation detection. In phase 2, a fuzzy logic inference system was developed to investigate the relationship between sway and perturbation detection. Results of this study may be applied to the design of floor mats or shoe insoles for preventing fatigue in workplaces.
Źródło:
International Journal of Occupational Safety and Ergonomics; 2006, 12, 3; 241-254
1080-3548
Pojawia się w:
International Journal of Occupational Safety and Ergonomics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Uprzęże w indywidualnym sprzęcie chroniącym przed upadkiem z wysokości
Harnesses in personal equipment protecting against falls from a height
Autorzy:
Baszczyński, Krzysztof
Powiązania:
https://bibliotekanauki.pl/articles/31342476.pdf
Data publikacji:
2022
Wydawca:
Centralny Instytut Ochrony Pracy
Tematy:
upadek z wysokości
uprząż
szelki bezpieczeństwa
pas do ustalania pozycji
falls from height
harness
full body harnesses
work positioning belt
Opis:
Integralnym elementem wszystkich indywidualnych systemów chroniących przed upadkiem z wysokości, stosowanych zarówno w warunkach przemysłowych, jak i podczas uprawiania sportu oraz rekreacji, jest uprząż, którą zakłada na siebie użytkownik sprzętu. Do najważniejszych zadań uprzęży, w zależności od jej rodzaju, należą: podtrzymanie ciała człowieka podczas i po powstrzymaniu spadania z wysokości, umożliwienie zajęcia pozycji podpartej, podtrzymanie ciała użytkownika w zawieszeniu podczas wykonywania pracy techniką dostępu linowego (rope access) oraz uniemożliwienie wejścia w strefę zagrożoną rozpoczęciem spadania. Przeznaczenie uprzęży jest ściśle związane z jej konstrukcją. W artykule zaprezentowano podstawowe konstrukcje oraz stosowane w nich materiały. Przedstawiono najważniejsze wymagania stawiane uprzężom oraz określono zasady ich doboru w zależności od warunków panujących na stanowisku pracy, w tym występujących zagrożeń i wykonywanych czynności. W artykule podano też podstawowe zasady użytkowania, przeglądów i oceny stanu technicznego uprzęży (ze szczególnym uwzględnieniem czynników powodujących ich degradację) oraz warunki ich wycofania z użytkowania. Bazując na badaniach prowadzonych w CIOP-PIB, zaprezentowano problematykę zagrożeń ze strony uprzęży dla człowieka w stanie zawieszenia.
An integral element of all personal fall protection systems, used both in industrial conditions and during sports and recreation, is the harness that the user of the equipment puts on. The most important tasks of the harness, depending on its type, include: supporting the human body during and after a fall arrest, enabling a supported position, supporting the user's body suspended during work with the rope access technique and preventing entry into the zone at risk of falling. The purpose of the harness is closely related to its construction. The article presents the basic structures and the materials used in them. The most important requirements for harnesses were presented and the rules for their se lection depending on the conditions at the workplace, including the hazards and activities performed, were defined. The article also presents the basic principles of use, inspections and evaluation of the technical condition of the harness (with particular emphasis on the factors causing its degradation) and the conditions for its withdrawal from use. Based on the research conducted at CIOP-PIB, the problem of threats to humans in a suspended state in harness was presented.
Źródło:
Bezpieczeństwo Pracy : nauka i praktyka; 2022, 2; 8-13
0137-7043
Pojawia się w:
Bezpieczeństwo Pracy : nauka i praktyka
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analiza zagrożeń uszkodzeń głowy pracownika podczas powstrzymywania spadania z wysokości
Analysis of hazards associated with injures to the employee’s head during fall arrest
Autorzy:
Baszczyński, K.
Powiązania:
https://bibliotekanauki.pl/articles/179523.pdf
Data publikacji:
2018
Wydawca:
Centralny Instytut Ochrony Pracy
Tematy:
upadek z wysokości
ruch wahadłowy
uderzenie głową
manekin antropomorficzny
falls from height
swing movement
head impact against an obstacle
anthropomorphic dummy
Opis:
Upadek z wysokości jest jednym z najpoważniejszych zagrożeń, z jakim stykają się ludzie w środowisku pracy w Polsce. Dotyczy to głównie stanowisk pracy w takich dziedzinach przemysłu, jak budownictwo, energetyka, górnictwo, gospodarka magazynowa itp. Jedną z podstawowych metod zabezpieczania pracowników w takich warunkach jest stosowanie indywidualnego sprzętu chroniącego przed upadkiem z wysokości. Wybór ten niesie ze sobą specyficzne zagrożenia związane zdziałaniem sprzętu podczas powstrzymywania spadania. Jednym z najpoważniejszych zagrożeń jest uderzenie o elementy stanowiska pracy podczas powstrzymywania spadania połączonego z ruchem wahadłowym. W artykule zaprezentowano warunki powstawania ruchu wahadłowego podczas powstrzymywania spadania z wysokości oraz pozycje jakie może przyjmować wówczas człowiek wyposażony w szelki bezpieczeństwa. Na podstawie wyników badań, w których zastosowano manekin antropomorficzny, oceniono potencjalne skutki uderzenia głową o przeszkodę podczas ruchu wahadłowego. Określono metody zabezpieczenia przed powstawaniem ruchu wahadłowego oraz sposoby łagodzenia skutków zderzenia z przeszkodami w obrębie stanowiska pracy W artykule przedstawiono podstawowe wymagania dla hełmów ochronnych przeznaczonych do równoczesnego stosowania z indywidualnym sprzętem chroniącym przed upadkiem z wysokości
A fall from a height is one of the most serious hazards faced by employees in the work environment. It is present mostly at workstations m such industries as construction. power engineering, mining, storage, etc. Using individual protective equipment against falls from a height is a basic method of protecting workers under such conditions. The choice of this method carries specific risks associated with the functioning of equipment during fall arrest. Hitting elements of the workstation during fall arrest associated with pendulum movement is a very serious threat. This paper presents conditions which trigger pendulum movement during fall arrest and the positions which a human equipped with a full body harness can assume then Potential effects of the impact of the head against an obstacle during pendulum movement are discussed on the basis of the results of research with an anthropomorphic dummy. The article discusses methods of preventing swing movement and ways of mitigating the effects of collisions with obstacles within the workstation It. also presents the basic requirements for protective helmets intended for use with individual protection equipment against falls from a height.
Źródło:
Bezpieczeństwo Pracy : nauka i praktyka; 2018, 2; 20-23
0137-7043
Pojawia się w:
Bezpieczeństwo Pracy : nauka i praktyka
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
‘‘Slip and Fall’’ Theory - Extreme Order Statistics
Autorzy:
Barnett, R. L.
Powiązania:
https://bibliotekanauki.pl/articles/89884.pdf
Data publikacji:
2002
Wydawca:
Centralny Instytut Ochrony Pracy
Tematy:
slips and falls
extreme value statistics
human locomotion
friction
slipperiness
Weibull
reliability
zabezpieczenia
upadek
tarcie
zagrożenia zdrowia
wypadki przy pracy
mata antypoślizgowa
Opis:
Classical ‘‘slip and fall’’ analysis was reformulated in this paper to account for the stochastic nature of friction. As it turned out, the new theory, arising from this analysis, was a precise statement of the distribution function for the smallest value among n independent observations. This made it possible to invoke an important result from the asymptotic theory of extreme order statistics that reduced the theory to a simple and elegant relationship among the probability of slipping, the critical friction criterion, the distance traveled by the walker, and the average, spread and asymmetry of the distribution of friction coefficients. The new theory reveals that short walks lead to fewer falls; low friction floors are sometimes better than high friction ones.
Źródło:
International Journal of Occupational Safety and Ergonomics; 2002, 8, 2; 135-158
1080-3548
Pojawia się w:
International Journal of Occupational Safety and Ergonomics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wymagania i metody badań urządzeń samozaciskowych chroniących przed upadkiem z wysokości, wyposażonych w sztywne prowadnice
Requirements and test methods for guided type fall arresters including a rigid anchor line
Autorzy:
Baszczyński, Krzysztof
Powiązania:
https://bibliotekanauki.pl/articles/957841.pdf
Data publikacji:
2019
Wydawca:
Centralny Instytut Ochrony Pracy
Tematy:
upadek z wysokości
urządzenia samozaciskowe
sztywna prowadnica
badania i certfikacja
falls from height
guided type fall arresters
rigid anchor line
tests and certification
Opis:
Urządzenia samozaciskowe ze sztywnymi prowadnicami, w postaci szyn lub napiętych lin stalowych, to indywidualny sprzęt chroniący przed upadkiem z wysokości, przeznaczony dla stanowisk pracy, na których pracownicy muszą przemieszczać się na długich odcinkach pionowych, np. wież telekomunikacyjnych, elektrowni wiatrowych, słupów energetycznych. W artykule zaprezentowano podstawowe konstrukcje urządzeń oraz zasadę ich działania. Ze względu na złożoną konstrukcję urządzeń samozaciskowych oraz ich odpowiedzialną rolę w zabezpieczeniu użytkowników muszą spełniać szereg wymagań, które wraz z metodami badań są zawarte w normach PN-EN i dokumentach Recommendation for Use (RfU). Zestawienia aktualnych wymagań i metod zaprezentowano w podziale na grupy dotyczące: materiałów i konstrukcji, odporności na obciążenie statyczne oraz zachowania i funkcjonowania w warunkach dynamicznych. Wskazano również na badania prawidłowości działania urządzeń podczas wchodzenia i schodzenia oraz badania niebezpiecznych zjawisk mogących wystąpić podczas powstrzymywania spadania, prowadzone z zastosowaniem manekinów antropomorficznych.
Guided type fall arresters including a rigid anchor line in the from of rails or wire ropes are elements of personal protective equipment designed to protect against falls from a height intended for worksites where employees have to move in the vertical direction over long distances, e.g., telecommunications towers wind power plants, transmission towers. This paper presents basic constructions of such devices and the principles of their action. Due to the complex structure of guided type tall arresters and their crucial role in ensuring the users' safety. They must meet a number of requirements. These requirements and the related test methods are contained both in PN-EN standards and in the Recommendation for Use (RfU] documents prepared by the European Coordination of Notified Bodies Vertical Group 11 - PPE against falls from a height. To provide the manufacturers and distributors of equipment protecting against falls from a height with a compilation of current requirements and testing methods. This paper presents them divided into groups according to materials and construction, resistance to static loads, and performance and function under dynamic conditions. The importance of tests of the reliability of the function of the devices when climbing or descending with the participation of appropriately selected and trained subjects and tests of the dangerous phenomena that may occur during the fall arrest carried out using anthropomorphic dummies has also been indicated.
Źródło:
Bezpieczeństwo Pracy : nauka i praktyka; 2019, 4; 15-18
0137-7043
Pojawia się w:
Bezpieczeństwo Pracy : nauka i praktyka
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Dobór sprzętu uniemożliwiającego rozpoczęcie spadania z wysokości
Selecting equipment for preventing falls from a height
Autorzy:
Baszczyński, K.
Korycki, R.
Powiązania:
https://bibliotekanauki.pl/articles/179906.pdf
Data publikacji:
2001
Wydawca:
Centralny Instytut Ochrony Pracy
Tematy:
środki ochrony indywidualnej
szelki bezpieczeństwa
upadek z wysokości
ochrona przed upadkiem z wysokości
personal protective equipment
full body harnesses
falls from a height
Opis:
Sprzęt uniemożliwiający rozpoczęcie spadania należy do kategorii środków ochrony indywidualnej przeznaczonych do ochrony pracowników przed upadkiem z wysokości. Ideą jego stosowania jest uniemożliwienie osiągnięcia przez użytkownika strefy zagrożonej upadkiem z wysokości. W skład każdego systemu uniemożliwiającego rozpoczęcie spadania wchodzą: punkt kotwiczenia, podzespół łączący i uprząż bezpieczeństwa. W artykule omówiono ideę stosowania, podstawowe zasady doboru poszczególnych składników oraz przykłady zastosowań.
Equipment for preventing falls from a height belongs to the category of personal protective equipment. Preventing the user from reaching a position where a fall can occur is the most important idea of applying this kind of equipment. The system for preventing falls from a height consists of an anchor device, a connecting component and body support. The paper presents the idea of use, methods of selecting components and examples of use.
Źródło:
Bezpieczeństwo Pracy : nauka i praktyka; 2001, 11; 21-22
0137-7043
Pojawia się w:
Bezpieczeństwo Pracy : nauka i praktyka
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Prevention of Falls on the Level in Occupational Situations: A Major Issue, a Risk to Be Managed
Autorzy:
Leclercq, S.
Powiązania:
https://bibliotekanauki.pl/articles/90698.pdf
Data publikacji:
2002
Wydawca:
Centralny Instytut Ochrony Pracy
Tematy:
falls on the level
unbalance
occupational accidents
prevention
działanie antagonistyczne
wypadki przy pracy
upadek z wysokości
ochrona przed upadkiem z wysokości
zagrożenia zdrowia
niebezpieczne praktyki
sytuacje niebezpieczne
Opis:
The terminology used to designate falls on the level is broadly based and the accidents concerned are only very rarely defined explicitly. A definition of falls on the level in occupational situations is therefore proposed. We attempt to define the issue represented by the prevention of such accidents on the basis of statistical data, prior to explaining the twin objectives focused on in the field of their prevention. We then propose a summary of unbalance risk factors in occupational situations. These factors are associated with different components of the occupational situation they concern: individuals, their tasks, the equipment used, or the working environment. The diversity of accident contexts and different in-company prevention possibilities are thereby highlighted. Finally, we discuss a number of consequences in prevention terms.
Źródło:
International Journal of Occupational Safety and Ergonomics; 2002, 8, 3; 337-385
1080-3548
Pojawia się w:
International Journal of Occupational Safety and Ergonomics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Systemy umożliwiające identyfikację upadku z wysokości
Systems for identifying falls from a height
Autorzy:
Jachowicz, Marcin
Owczarek, Grzegorz
Powiązania:
https://bibliotekanauki.pl/articles/2202848.pdf
Data publikacji:
2021
Wydawca:
Centralny Instytut Ochrony Pracy
Tematy:
upadek z wysokości
akcelerometryczne układy pomiarowe
analiza obrazu wideo
skracanie drogi spadania
falls from a height
accelerometric measuring systems
analysis of the recorded video
shortening of the fall path
Opis:
W artykule omówiono dwa rodzaje opracowanych w CIOP-PIB systemów umożliwiających identyfikację upadku człowieka z wysokości. Działanie pierwszego z nich jest oparte na akcelerometrycznym układzie pomiarowym, zaimplementowanym w pasie biodrowym, który stanowi element sprzętu zabezpieczającego przed upadkiem z wysokości. Działanie drugiego systemu polega na analizie zarejestrowanego obrazu wideo. Przedstawiono metody oraz wyniki badań kalibracyjnych i sprawdzających obu zaprojektowanych systemów, które wykorzystano do przeprowadzenia badań wstępnych. Podczas tych badań uczestnik wykonywał określone ćwiczenia: siadanie i symulowany upadek. Porównanie wyników badań wykazało dużą zbieżność pomiędzy wartościami zmierzonymi za pomocą czujników przyspieszeń oraz wartościami uzyskanymi na podstawie przeprowadzonej analizy obrazu. Opisane systemy mogą więc posłużyć do identyfikacji upadku oraz jako elementy inicjujące urządzenia do dynamicznego skracania drogi spadania, które zmniejszą siły działające na człowieka podczas powstrzymywania jego spadania z wysokości.
The article discusses two types of systems developed at CIOP-PIB, which enable the identification of human falls from a height. The operation of the first system is based on an accelerometric measuring system implemented in the hip belt, which is an element of the equipment protecting against falls from a height. The operation of the second system is based on the analysis of the recorded video. The methods and results of calibration and verification tests of both designed systems, which were used for the preliminary tests, were presented. During these tests, the participant performed specific exercises: sitting down and simulating falling. The comparison of the test results showed a high convergence between the values measured with the acceleration sensors and the values obtained on the basis of the image analysis. The described systems can therefore be used for fall identification and as initiators of devices for dynamic shortening of the fall path, which will reduce the forces acting on a person during restraining his fall from a height.
Źródło:
Bezpieczeństwo Pracy : nauka i praktyka; 2021, 10; 17-21
0137-7043
Pojawia się w:
Bezpieczeństwo Pracy : nauka i praktyka
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Test Method for Retractable Type Fall Arresters Designed for Horizontal Use
Autorzy:
Baszczyński, K.
Zrobek, Z
Powiązania:
https://bibliotekanauki.pl/articles/90947.pdf
Data publikacji:
2003
Wydawca:
Centralny Instytut Ochrony Pracy
Tematy:
personal protective equipment against falls from a height
retractable type fall arresters
test methods
dynamic performance test
ochrona przed upadkiem z wysokości
upadek z wysokości
sprzęt przeciwupadkowy
technika bezpieczeństwa pracy
Opis:
Retractable type fall arresters are designed to protect against falls from a height of people who need freedom of vertical movement. The practice of fall protection shows that the devices are also used to protect people who work on flat roofs. This application creates quite different operating conditions for the devices. In some situations those conditions can be dangerous for users. The article presents a theoretical analysis of phenomena occurring during a fall arrest with retractable type fall arresters arranged horizontally. The analysis was verified with laboratory tests. The article presents a proposal for the construction of a test stand and a test method for estimating retractable type fall arresters intended for horizontal use.
Źródło:
International Journal of Occupational Safety and Ergonomics; 2003, 9, 3; 313-331
1080-3548
Pojawia się w:
International Journal of Occupational Safety and Ergonomics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Locking of Retractable Type Fall Arresters - Test Method and Stand
Autorzy:
Baszczyński, K.
Powiązania:
https://bibliotekanauki.pl/articles/90097.pdf
Data publikacji:
2005
Wydawca:
Centralny Instytut Ochrony Pracy
Tematy:
personal protective equipment against falls from a height
retractable type fall arresters
locking test method
measurement of acceleration signals
praca na wysokości
upadek z wysokości
sprzęt przeciwupadkowy
środki ochrony indywidualnej
wypadki przy pracy
Opis:
Retractable type fall arresters are very effective personal equipment protecting against falls from a height. These devices are used under different atmospheric conditions and in the presence of various types of industrial pollution. For this reason appropriate locking after conditioning simulating extreme conditions of a worksite is one of the essential characteristics of retractable type fall arresters. This article presents the requirements for locking of the devices. A previously used locking test method and its disadvantages are discussed. The article suggests an improved test method and test equipment. Measurement of the test mass acceleration is the most important improvement introduced into the test method. The article shows laboratory tests used to verify the method, which turned out to be a valuable source of information concerning the performance of retractable type fall arresters.
Źródło:
International Journal of Occupational Safety and Ergonomics; 2005, 11, 2; 191-202
1080-3548
Pojawia się w:
International Journal of Occupational Safety and Ergonomics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The Influence of Anchor Devices on the Performance of Retractable Type Fall Arresters Protecting Against Falls From a Height
Autorzy:
Baszczyński, K.
Powiązania:
https://bibliotekanauki.pl/articles/91071.pdf
Data publikacji:
2006
Wydawca:
Centralny Instytut Ochrony Pracy
Tematy:
personal protective equipment against falls from a height
retractable type fall arresters
anchor devices
test methods
dynamic performance test
upadek z wysokości
sprzęt przeciwupadkowy
ochrona przed upadkiem z wysokości
środki ochrony indywidualnej
Opis:
Retractable type fall arresters are part of the equipment used for protecting people against falls from a height. They are an intermediate part between full body harness worn by a man and the structural anchor at the worksite. The most important task of retractable type fall arresters is to arrest people’s falls and to reduce their harmful consequences. Information received from users as well as laboratories testing protective equipment indicates that the performance of such equipment is incorrect under specific conditions. The paper is concerned with an analysis of the conditions in which retractable type fall arresters demonstrate intermittent performance and with an explanation of that phenomenon. The results of tests investigating anchor devices and the performance of retractable type fall arresters are presented. External and internal factors contributing to intermittent performance have been determined and guidelines for safer use of these devices have been developed.
Źródło:
International Journal of Occupational Safety and Ergonomics; 2006, 12, 3; 307-318
1080-3548
Pojawia się w:
International Journal of Occupational Safety and Ergonomics
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-14 z 14

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies