Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "spalanie biomasy" wg kryterium: Temat


Wyświetlanie 1-6 z 6
Tytuł:
Movement of Chemical Elements in Ash on the Example of a Process of Combustion Corn Straw Briquettes in a Low Power Boiler
Przemieszczanie się pierwiastków w popiele na przykładzie procesu spalania brykietów ze słomy kukurydzianej w kotle małej mocy
Autorzy:
Kraszkiewicz, Artur
Sobczak, Paweł
Żukiewicz-Sobczak, Wioletta
Niedziółka, Ignacy
Zawiślak, Kazimierz
Dula, Małgorzata
Powiązania:
https://bibliotekanauki.pl/articles/1811968.pdf
Data publikacji:
2019
Wydawca:
Politechnika Koszalińska. Wydawnictwo Uczelniane
Tematy:
biomass combustion
emission
ash composition
spalanie biomasy
emisja
skład popiołu
Opis:
In Poland, the use of plant biomass for energy purposes is gaining importance. At the same time, the popularity of dendromass, despite changes in regulations increasing its supply for energy purposes, promotes an increased interest in a biomass of agricultural origin. This trend is associated not only with professional energy industry, but also depends on the increase in demand for different assortments of solid biofuels in single-family housing or municipal buildings, where coal boilers are replaced by modern heating devices powered by a biomass under the "anti-smog" program. Biomass combustion is treated as a process neutral to the environment through the prism of CO2 emissions. However, under certain conditions, the combustion of biofuels in individual heating systems can cause serious risks on the local scale for the environment and human health. The aim of the study was to assess the migration of elements in the ash during the burning process of maize straw briquettes in the low power boiler in the aspect of their impact on the natural environment, taking into account the directions and potential for the potential management of ashes. In the test conditions, the fuel used in the form of briquettes from maize straw does not differ from other fuels of this type. The combustion criteria adopted during the tests, whose characteristic feature was the use of a grate combustion system with fuel ignition from below and distribution of air under the grate, at minimum content O2, was acceptable in the scope of CO emissions for this type of boiler, falling into 3rd class according to the standard PN-EN 303-5: 2012. The burning of the gas components CO, NO and SO2 is significantly affected by combustion technology, combustion conditions and nitrogen content in the fuel. Choosing to burn biofuels with the lowest nitrogen content should contribute to the reduction of NO emissions, which becomes another criterion for allowing heating devices to be marketed. Despite the varied chemical composition, the ashes analyzed in terms of the macro environment, microelements and heavy metals do not tend to exceed the limits set by the relevant standards. The experimental results indicate that in low-power boilers fed with briquettes of maize straw, the ash components move. Anomalies that appeared for Al, Fe, Sc are particularly important. This process is important from the point of view of environmental protection, boiler durability and the possibility of using furnace wastes. Low-power boilers, which do not have exhaust gas treatment installations in which biomass fuels are used, may be a source of harmful emissions.
W Polsce wykorzystanie biomasy roślinnej na cele energetyczne zyskuje na znaczeniu. Jednocześnie popularność dendromasy, pomimo zmian w przepisach zwiększających jej podaż na cele energetyczne, sprzyja zwiększonemu zainteresowaniu biomasą pochodzenia rolniczego. Trend ten wiąże się nie tylko z energetyką zawodową, ale również koresponduje ze wzrostem zapotrzebowania na różne sortymenty biopaliw stałych w budownictwie jednorodzinnym lub komunalnym gdzie wymieniono kotły węglowe na nowoczesne urządzenia grzewcze zasilane biomasą na mocy programu „antysmogowego”. Spalanie biomasy, jest traktowane jako proces neutralny dla środowiska w kontekście emisji CO2. Jednak w pewnych warunkach spalanie biopaliw w indywidualnych systemach grzewczych, może powodować poważne zagrożenie w skali lokalnej dla środowiska i zdrowia ludzi. Celem przeprowadzonych badań była ocena przemieszczania się pierwiastków w popiele podczas procesu spalania brykietów ze słomy kukurydzianej w kotle małej mocy w aspekcie ich wpływu na środowisko przyrodnicze uwzględniając tym samym kierunki i możliwości potencjalnego zagospodarowania popiołów. W warunkach badań wykorzystane paliwo w postaci brykietów ze słomy kukurydzianej nie odbiegało od innych paliw tego typu. Przyjęte podczas badań kryteria spalania, którego charakterystyczną cechą było wykorzystanie rusztowego systemu spalania z zapłonem paliwa od dołu i dystrybucją powietrza pod ruszt, przy minimalnej zawartości O2, była akceptowalna w zakresie emisji CO dla tego typu kotła mieszcząc się w 3 klasie według normy PN-EN 303-5:2012. Na obciążenie środowiska składnikami gazowymi CO, NO i SO2 wyraźny wpływ ma technologia spalania, warunki spalania i zawartość azotu w paliwie. Wybór biopaliw o jak najmniejszej zawartości azotu powinien przyczynić się do zmniejszenia emisji NO, która staje się kolejnym kryterium dopuszczającym urządzenia grzewcze do obrotu. Pomimo zróżnicowanego składu chemicznego analizowane popioły pod kątem obciążenia środowiska makro-, mikroelementami i metalami ciężkimi nie wykazują tendencji do przekroczenia wartości granicznych określonych odpowiednimi normami. Wyniki eksperymentalne wskazują, że w kotłach małej mocy zasilanych brykietami ze słomy kukurydzianej zachodzi przemieszczanie się składników popiołu. Szczególnie istotne są anomalie, które pojawiły się dla Al, Fe, Sc. Proces ten jest istotny z punktu widzenia ochrony środowiska, trwałości kotłów oraz możliwości wykorzystania odpadów paleniskowych. Kotły małej mocy, nieposiadające instalacji oczyszczania spalin w których stosuje się biopaliwa stałe mogą być źródłem emisji substancji szkodliwych.
Źródło:
Rocznik Ochrona Środowiska; 2019, Tom 21, cz. 2; 1294-1306
1506-218X
Pojawia się w:
Rocznik Ochrona Środowiska
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Obciążenie środowiska produktami spalania peletów z biomasy roślinnej w kotle górnego spalania
Burden for the Environment by the Products of Pellets from Plant Biomass Incineration in Low-Power Heating Devices
Autorzy:
Kraszkiewicz, A.
Stryjecka, M.
Nowosad, N.
Kocira, S.
Powiązania:
https://bibliotekanauki.pl/articles/1813766.pdf
Data publikacji:
2018
Wydawca:
Politechnika Koszalińska. Wydawnictwo Uczelniane
Tematy:
spalanie biomasy
emisja
metale ciężkie
biomass combustion
emission
heavy metals
Opis:
Spalanie biomasy, jest traktowane jako proces neutralny dla środowiska przez pryzmat emisji CO2. Jednak w pewnych warunkach spalanie biopaliw w indywidualnych systemach grzewczych, może powodować poważne zagrożenie w skali lokalnej dla środowiska i zdrowia ludzi. Biorąc pod uwagę cechy energetyczne biomasy, podjęto badania, których celem było ilościowe określenie wybranych produktów gazowych i stałych spalania peletów ze słomy pszennej, żytniej i trocin sosnowych. W grupie produktów gazowych określono emisję CO, NO i SO2, natomiast w grupie produktów stałych (w popiele) określono zawartość wybranych makro- i mikroelementów oraz metali ciężkich. W warunkach badań zaobserwowano znacznie zróżnicowaną emisję CO, NO i SO2. Na obciążenie środowiska CO i SO2 wyraźny wpływ ma technologia spalania i warunki spalania. Okresowe spalanie porcji peletów z biomasy roślinnej na ruszcie z zapłonem od dołu i podawaniem powietrza pod ruszt powoduje znaczną emisję CO do atmosfery w początkowej fazie spalania oraz w końcowej podczas dopalania pozostałości koksowej. Jedynie, głównie dla peletów z biomasy drzewnej, przez krótki czas spalania emisja CO była na poziomie akceptowalnym, określonym przez stosowne standardy. Wykorzystanie peletów w takich urządzeniach grzewczych niesie ze sobą niewielki efekt ekologiczny oraz sprawia że spalanie odbywa się ze znacznie mniejszą efektywnością. Przy wykorzystaniu tego typu biopaliw, charakteryzujących się przeciętną temperaturą spalania mniejszą od 800°C, istotna jest również emisja NO do atmosfery, która poprzez zależność od zawartości azotu w paliwie mniej jest związana z konstrukcją paleniska. Wybór do spalania biopaliw o jak najmniejszej zawartości azotu powinien przyczynić się do zmniejszenia emisji NO, która staje się kolejnym kryterium dopuszczającym urządzenia grzewcze do obrotu. Wielu badaczy zwraca uwagę na możliwą emisję pyłów i wielopierścieniowych węglowodorów aromatycznych podczas spalania biomasy. Stąd też celowym byłoby wykonanie takich analiz w odniesieniu do kotłów małej mocy górnego spalania i z automatycznym podawaniem paliwa, uwzględniając różnice pomiędzy rodzajami wykorzystanych do spalania surowców. Stały produkt spalania w postaci popiołu ze słomy, ze względu na większą obecność potasu niż w drewnie, może powodować dodatkowo problemy z dystrybucją powietrza przez spieki tworzące się na ruszcie. Skutkuje to pogorszeniem spalania i większą emisją do atmosfery. Pomimo zróżnicowanego składu chemicznego analizowane popioły pod kątem obciążenia środowiska makro, mikroelementami i metalami ciężkimi nie wykazują tendencji do przekroczenia wartości granicznych określonych odpowiednimi normami. Niewielka zawartość metali ciężkich w analizowanych peletach świadczy o jego ekologicznych właściwościach w aspekcie jego energetycznego wykorzystania, nie powodując przeciwskazań przy wprowadzeniu do środowiska stałych produktów spalania jako nawozu.
Biomass combustion is treated as a neutral process for the environment through the prism of CO2 emissions. However, under certain conditions, the burning of biofuels in individual heating systems can result in a serious local threat to the environment and human health. Considering energetic features of biomass, research was undertaken to quantify selected gas products and solid combustion of wheat, rye, and sawdust straw pellets. In the group of gaseous products the emission of CO, NO and SO2 was determined, whereas in the group of solid products (in ash) the value of selected macro- and microelements as well as heavy metals was determined. In the test conditions, significantly differentiated emissions of CO, NO and SO2 were observed. The combustion technology and combustion conditions have a significant effect on the CO and SO2 load. Periodic combustion of a portion of plant biomass pellets on the grate with ignition from below and air supply under the grate causes a significant emission of CO to the atmosphere in the initial combustion phase and in the final coke residue after burning. Only, mainly for wood biomass pellets, CO emission for a short time was at an acceptable level, determined by appropriate standards. The use of pellets in such heating devices brings with it a small ecological effect and makes burning much less effective. Using this type of biofuels, characterized by average combustion temperature less than 800°C, also important is the emission of NO to the atmosphere, which through the dependence on the nitrogen content in the fuel is less related to the construction of the furnace. Choosing to burn biofuels with the lowest nitrogen content should contribute to the reduction of NO emissions, which becomes another criterion for allowing heating devices to be marketed. Many researchers point to the possible emission of dust and polycyclic aromatic hydrocarbons during biomass burning. Therefore, it would be advisable to carry out such analyzes with regard to low-power upper combustion boilers and with automatic fuel delivery, taking into account the differences between the types of raw materials used for combustion. The solid combustion product in the form of straw ash, due to the greater presence of potassium than in wood, can cause additional problems with the distribution of air by the sinters forming on the grid. This results in reduced combustion and increased emissions to the atmosphere. Despite the varied chemical composition, the ashes analyzed in terms of the macro, micronutrient and heavy metals load do not tend to exceed the limits set by the relevant standards. The low content of heavy metals in the analyzed pellets shows its ecological properties in terms of its energy use, without causing contraindications when introducing solid combustion products to the environment as a fertilizer.
Źródło:
Rocznik Ochrona Środowiska; 2018, Tom 20, cz. 2; 1269-1285
1506-218X
Pojawia się w:
Rocznik Ochrona Środowiska
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Badanie emisji wybranych zanieczyszczeń gazowych podczas spalania peletów z agro biomasy w kotle małej mocy
Research on Emissions from Combustion of Pellets in Agro Biomass Low Power Boiler
Autorzy:
Szyszlak-Bargłowicz, J.
Zając, G.
Słowik, T.
Powiązania:
https://bibliotekanauki.pl/articles/1813882.pdf
Data publikacji:
2017
Wydawca:
Politechnika Koszalińska. Wydawnictwo Uczelniane
Tematy:
pelety
spalanie biomasy
kotły biomasowe
pellets
biomass combustion
biomass boilers
Opis:
Dynamiczny rozwój rynku biomasy powoduje, że jej tradycyjne źródła nie dają możliwości pokrycia zapotrzebowania na nią. Alternatywą może być biomasa pozyskiwana z innych źródeł w tym biomasa typu agro, która mogłyby zastąpić pelety drzewne stosowane w indywidualnym ogrzewnictwie. Przed jej szerszym wprowadzeniem do użytkowania należy wziąć pod uwagę, że efektywność techniczna i eksploatacyjna generowania ciepła w źródłach małej mocy uzależniona jest zarówno od paliwa jak i od urządzenia grzewczego. Charakterystyka techniczna urządzenia grzewczego determinuje dobór paliwa, z kolei jakość paliwa wpływa na organizację procesu spalania. Rozważając spalanie w nich peletów z innych rodzajów biomasy, należy prowadzić proces w sposób kontrolowany, tak aby nie destabilizować procesu spalania a tym samym zwiększać strat i emisji. Celem przeprowadzonych badań było wykazanie i przeanalizowanie efektów ekologicznych i problemów eksploatacyjnych wynikających ze stosowania peletów z biomasy typu agro w kotle małej mocy przystosowanym do spalania peletów drzewnych. Określono emisję CO, NO, SO2, podczas spalania w kotle automatycznym, o mocy 10 kW peletów: drzewnych, ze ślazowca pensylwańskiego, miskanta olbrzymiego, słomy rzepakowej i z łusek słonecznika. Instalacja zastosowana w badaniach była typową instalacją wykorzystywaną do ogrzewania domów jednorodzinnych przeznaczoną do spalania peletów drzewnych. Najniższe stężenie CO i SO2 stwierdzono podczas testu spalania petów drzewnych. Wynosiło ono, po przeliczeniu na 10% zaw. O2 w spalinach, odpowiednio: CO 70,16 mg∙m-3; SO2 0,0655 mg∙m-3. Najwyższe stężenie CO stwierdzono podczas testu spalania peletów z łusek słonecznika: 470,21 mg∙m-3 (10% zaw. O2), a najwyższe stężenie SO2 odnotowano podczas testu spalania peletów ze słomy rzepakowej 0,1384 mg∙m-3 (10% zaw. O2). Otrzymane wyniki badań emisji SO2 korespondują z badaniami zwartości siarki w spalanych paletach. Najwyższe stężenie NO (10% zaw. O2) stwierdzono podczas spalania peletów drzewnych 271,73 mg∙m-3 i peletów ze ślazowca pensylwańskiego 248,31 mg∙m-3, nieco niższa podczas spalania słomy rzepakowej 136,76 mg∙m-3 a najniższe podczas spalania peletów z miskanta olbrzymiego i łusek słonecznika 75,79 mg∙m-3 i 58,62 mg∙m-3. Największe problemy z ustabilizowaniem pracy kotła wystąpił podczas spalania peletów z łusek słonecznika, co przełożyło się na najwyższą emisję tlenku węgla w spalinach, wynikającą z niezupełnego spalania paliwa.
The dynamic development of the biomass market makes its traditional sources are not capable of covering demand for it. Alternatively, biomass can be obtained from other sources including biomass agro type that could replace wood pellets used in individual heating systems. Before to its introduction to the wider use should be taken into account that the effectiveness of technical and operational generating heat sources of low power depends on both the fuel and the heating device. Technical characteristics of the heating equipment determines the choice of fuel, in turn, affects the quality of fuel organization of the combustion process. Considering the combustion of these pellets in other types of biomass, the process should be carried out in a controlled manner so as not to destabilize the combustion process and thereby increase the losses and emissions. The aim of the study was to demonstrate and analyze the effects of environmental and operational problems arising from the use of pellets from biomass in agro-type boiler low power adapted to burn wood pellets. Specified emission of CO, NO, SO2, during combustion in the boiler automatic 10 kW pellets: wood, from Virginia mallow, giant miscanthus, rape straw and sunflower husk. The installation used in the study was a typical installation, used for heating houses designed to burn wood pellets. The lowest concentration of CO and SO2 were found during the combustion test wood pets. It was, after conversion to 10% excl. O2 in the exhaust gasses, respectively, CO 70.16 mg∙m-3; SO2 0.0655 mg∙m-3. The highest concentration of CO were found during the combustion test pellets from sunflower husk: 470.21 mg∙-3 (10% excl. O2), and the highest concentration of SO2 was recorded during the combustion test pellets from rape straw 0.1384 mg∙-3 (10% excl. O2). The results obtained SO2 emissions correspond to the sulfur concentration in burned pallets. The highest concentration of NO (10% excl. O2) found during the combustion test wood pellets 271.73 mg∙m-3 and pellets from Virginia mallow 248.31 mg∙m-3, slightly lower than the combustion of rape straw 136.76 mg∙m-3 and the lowest during the combustion of pellets from giant miscanthus and sunflower husk 75.79 mg∙m-3 and 58.62 mg∙-3. The biggest problems with the stabilization of the boiler occurred while burning pellets from sunflower husk, which resulted in the highest emissions of carbon monoxide in the exhaust gasses resulting from incomplete combustion of fuel.
Źródło:
Rocznik Ochrona Środowiska; 2017, Tom 19; 715-730
1506-218X
Pojawia się w:
Rocznik Ochrona Środowiska
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Emisja tlenku azotu NOx ze spalania biomasy wierzbowej
Nitrogen oxides NOx emissions from combustion of willow biomass
Autorzy:
Sztyma-Horwat, M.
Styszko, L.
Powiązania:
https://bibliotekanauki.pl/articles/1819545.pdf
Data publikacji:
2011
Wydawca:
Politechnika Koszalińska. Wydawnictwo Uczelniane
Tematy:
spalanie biomasy
tlenek azotu
biomasa wierzbowa
combustion of biomass
nitric oxide
willow biomass
Opis:
Celem pracy była ocena emisji NOx ze spalania biomasy wierzbowej kilku klonów wierzby krzewiastej (Salix viminalis) pozyskanej w drugim, trzecim i czwartym roku uprawy w rejonie Koszalina, na glebie lekkiej, na zróżnicowanym nawożeniu organicznym i mineralnym.
In the study the influence of combustion of shrubby willow shoots was evaluated in laboratory conditions upon the content of the nitrogen oxide NOx in combustion gases. Analyses covered biomass of nine willow's clones cultivated four years in light soil using compost from municipal sewage sludge and diverse doses of fertilizer Hydrofoska 16. Samples of biomass were taken in two terms (directly after mowing during winter and at the turn of May and June). The combustion of samples of willow biomass from the willow's crop after the harvest in the first and second term in years 2008÷2010 was carried out in temperatures: 300°C, 600°C, 900°C and 1200°C. During combustion the intensity of air flow amounted to 8.0 dm3 ź min-1. Formation of nitrogen oxide NOx during combustion of willow biomass was mostly influenced by temperatures of combustion (73.4%), less influenced by age of acquired willow shoots (10.6%), and joint action of temperature of combustion and age of the willow shoots (8.0%), and relatively little influenced but essential, by day of biomass harvesting (0.3%), fertilizer combinations (0.2%) and the willow clones (0.1%). The differences among extreme levels of factors under investigation concerning content of nitrogen oxide NOx in combustion gases in order of diminishing effects were ranked as follows: temperature of biomass combustion - 212.7 mg/m? NOx, age of the willow's shoots - 71.6 mg/m? NOx, fertilizer combina-tions - 12.0 mg/m? NOx, date of biomass sampling - 8.7 mg/m? NOx and the willow's clones - 8.5 mg/m? NOx. The smallest quantities of nitrogen oxide NOx formed in the process of combustion of biomass developed in temperature 300°C, and the highest in temperature 1200°C. Increase of combustion temperature from 300°C to 1200°C resulted in increase of the content of nitrogen oxide NOx in combustion gases. The smallest quantities of nitrogen oxide NOx produced during combustion of the willow biomass were obtained in fourth year of cultivation, and higher from cultivations in third and second year. The highest quantities of nitrogen oxide NOx produced during combustion of the biomass were generated from "d" objects, where the highest doses of compost and the fertilizer Hydrofoska 16 were applied. On the contrary, the smallest quantities of nitrogen oxide NOx were produced during combustion of biomass from "a" objects, where compost and fertilizer Hydrofoską 16 were not applied. Use of intensive organic and mineral fertilization (object "d") caused essential stronger air pollution by nitrogen oxide NOx than combustion of biomass originating from objects of lower mineral fertilization (object "c"). Higher quantities of nitrogen oxide NOx were produced during combustion of willow biomass from the first term of sampling biomass (February 2008 and 2009 and November 2009) than from the second term of sampling (at the turn of May and June). The highest quantities of the nitrogen oxide NOx were produced during combustion of willow biomass clone 1052 (127.8 mg/m?), and the smallest during combustion of clone 1033 (119.3 mg/m?). Creation of the nitrogen oxides NOx was influenced by double interactions also: fertilizer combinations with temperatures of combustion, fertilizer combinations with age of shoots, temperatures of combustion with term of sampling, temperatures of combustion with age of shoots and date of sampling with age of shoots, and also threefold interaction of temperatures of combustion with term of sampling and age of shoots and fourfold interaction of fertilizer combinations with temperatures of combustion, term of sampling and the age of shoots. Total interactions were responsible for 15.4% of content of nitrogen oxide NOx in combustion gases.
Źródło:
Rocznik Ochrona Środowiska; 2011, Tom 13; 787-800
1506-218X
Pojawia się w:
Rocznik Ochrona Środowiska
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Praktyczne aspekty spalania biomasy w kotłach rusztowych. Doświadczenia eksploatacyjne na przykładzie współspalania biomasy w kotle WR-10 w Ciepłowni DPM w Koszalinie
Practical aspects of biomass co-burning in grid boilers. Exploitation experiences on the example of biomass co-burning in WR-10 boiler in DPM heat generating station, Koszalin
Autorzy:
Miller, U.
Powiązania:
https://bibliotekanauki.pl/articles/1819776.pdf
Data publikacji:
2009
Wydawca:
Politechnika Koszalińska. Wydawnictwo Uczelniane
Tematy:
spalanie biomasy
doświadczenia eksploatacyjne
aspekt praktyczny
biomass co-burning
exploitation experiences
practical aspects
Opis:
Stosowanie biomasy do produkcji energii elektrycznej i cieplnej jest ważnym narzędziem do walki ze zmianami klimatycznymi. Umożliwia również zwiększenie bezpieczeństwa energetycznego. Wśród różnych celów, które postawiła sobie Miejska Energetyka Cieplna w Koszalinie jest również dywersyfikacja paliw.Korzyści wynikające ze współspalania biomasy są następujące: niskie koszty inwestycyjne przystosowania kotła do współspalania biomasy, niewielka zmiana parametrów kotła przy niskim udziale cieplnym biomasy, wykorzystanie istniejącej infrastruktury i urządzeń, okresowe fluktuacje biomasy mogą być rekompensowane zmianą udziałubiomasy do węgla,możliwość użycia dużej ilości biomasy pozwalającej na istotną redukcję CO2. Wykorzystanie biomasy zawierającej składniki palne w procesie spalania jest znaną i stosowaną technologią. Ze względu na różnorodność surowców zaliczanych do biomasy, zakres jej wykorzystania jest szeroki. Z punktu widzenia kosztów transportu trzeba podkreślić możliwość wykorzystania surowca produkowanego w niewielkiej odległości od miejsca jego spalania [3, 4, 5].
The paper presents results of research conducted from January to October 2008, of the following technological parameters: calorific value, content of moisture, content of sulphur, ash, of biomass and fine coal. Results of co-burning of biomass and fine coal in the industrial grate boiler WR-10 of Koszalin Heating Plant were introduced. Investigations consisted of: elaboration of co-burning technology of biomassand waste with fine coal in grid boilers, determination of the most favourable part of biomass for the sake of energetic efficiency and kind of biomass mixed with fine coal. Exploitation investigations were conducted according to following plan: examinations of physic-chemical and energetic parameters of biomass and fine coal, examinationsof energetic characteristics of boiler during co-burning. All examinations were conducted under conditions of current exploitation of boiler. Co-burning of fine coal with biomass part of 25% allows to maintain boiler efficiency at the level of 80% at average calorific value of biomass 12 MJ/kg and average calorific value of fine coal 22,5 MJ/kg. SO2 emission decreases during co-burning of biomass and fine coal due to very small content of sulphur in biomass. Deposition on heating surface of the boiler was not bigger and quicker during co-burning than in the case of alone fine coal burning. Than it may be stated, that additives (precluding deposition on boiler's heating surface) used with fine coal are also effective in the case of biomass co-burning. Obvious drop of calorific value of fine coal and biomass mixture is unfavourable, because boilers are designer for specific given calorific value of fuel used in them. So the calorific value of the fuel is a very important issue. Taking into consideration political situation in Poland and in the World in the aspect of diversification of classic fuels supply, every idea which creates an alternative to classic fuel should be deeply considered [7]. It seems to be purposeful to undertake industrial examinations on application of alternative fuels produced from wastes, such as plastics, rubber, segregated municipal wastes, etc., for co-burning with coal. Application of co-burning process in Rother boilers of Koszalin Heat Generating Company has been planned.
Źródło:
Rocznik Ochrona Środowiska; 2009, Tom 11; 739-749
1506-218X
Pojawia się w:
Rocznik Ochrona Środowiska
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Comparison and Assessment of Emission Factors for Toxic Exhaust Components During Combustion of Biomass Fuels
Porównanie i ocena wskaźników emisji toksycznych składników spalin podczas spalania paliw biomasowych
Autorzy:
Zając, Grzegorz
Szyszlak-Bargłowicz, Joanna
Słowik, Tomasz
Powiązania:
https://bibliotekanauki.pl/articles/1811756.pdf
Data publikacji:
2019
Wydawca:
Politechnika Koszalińska. Wydawnictwo Uczelniane
Tematy:
pellets
biomass combustion
small scale boilers
emission factor
pelety
spalanie biomasy
kotły małej mocy
wskaźniki emisji
Opis:
The assessment of environmental benefits resulting from biomass burning is a complex issue. The most reliable is when there is the possibility of empirical emission assessment using various fuels in energy installations. If no specific emission data is available, it should be estimated using appropriate indicators. There is still considerable uncertainty in the assessment of the impact of pollutant emissions accompanying the combustion of biomass on air quality on a local scale. This is caused not only by the lack of data on the amount of biomass burned but also by the lack of emission factors that would characterize real combustion. In this context, it is extremely important to expand knowledge about environmental aspects resulting from the use of energy biomass. The aim of the work was to compare and assess emission factors of toxic exhaust components obtained on the basis of direct measurements and indicators estimated using the index method, calculated on the basis of appropriate fixed-point indicators available in the literature. The work uses a commercially available automatic pellet boiler with a capacity of 10 kW. Combustion tests were carried out for five different materials, including wood pellets, energy plant pellets and agricultural waste. The emission factors were determined for CO, NOx and SO2 with reference to the unit of mass of fuel and calorific value of fuel. The CO, NOx, SO2 emission indices determined using the index method were burdened with a large error. In the case of CO and NOxemission indicators, this resulted from the course of the combustion process, which for the biofuels tested did not always run equally smoothly and without problems, which affected the obtained boiler power. During the conducted combustion tests, when the boiler reached its rated power and maximum load, the CO emission indices determined using the index method were much higher than those determined empirically. On the other hand, NOx emission factors determined using the index method were lower than those determined empirically. It follows that setting emission indicators using biomass fuels may be subject to a very large error and not to inform about the actual emissions from low-capacity boilers installed in individual households. Because the combustion process is very sensitive to the conditions in which it occurs, and their slight change may cause major changes in emission factors, it can not be considered that the emission factors obtained in the conducted research can be an undisputable source of information about emissions from this type of installations. Further emission tests are required, taking into account different types of equipment, a wide range of their models and technologies as well as various biomass fuels. The results of this research will allow the development of more accurate drift rates for biomass fuels and for more precise estimation of emission factors.
Ocena korzyści środowiskowych, wynikających ze spalania biomasy, jest zagadnieniem złożonym. Najbardziej wiarygodna jest wówczas, gdy istnieje możliwość empirycznej oceny emisji z wykorzystaniem różnych paliw w instalacjach energetycznych. Jeżeli brak jest konkretnych danych o emisji, należy ją oszacować, wykorzystując odpowiednie wskaźniki. Wciąż istnieje znaczna niepewność oceny wpływu emisji zanieczyszczeń towarzyszących spalaniu biomasy na jakość powietrza w skali lokalnej. Spowodowane jest to nie tylko brakiem danych dotyczących ilości spalanej biomasy ale również brakiem współczynników emisji, które charakteryzowałyby spalanie rzeczywiste. W tym kontekście niezwykle istotne jest poszerzanie wiedzy dotyczącej aspektów środowiskowych wynikających z wykorzystania energetycznego biomasy. Celem pracy było porównanie i ocena wskaźników emisji toksycznych składników spalin, uzyskanych na podstawie pomiarów bezpośrednich oraz wskaźników oszacowanych za pomocą metody wskaźnikowej, obliczonych na podstawie odpowiednich, dostępnych w literaturze wskaźników unosu. W pracy wykorzystano dostępny komercyjnie, automatyczny kocioł na pelety o mocy 10 kW. Testy spalania przeprowadzono dla pięciu różnych materiałów, w tym peletów drzewnych, peletu z roślin energetycznych i odpadów rolniczych. Wskaźniki emisji wyznaczono dla CO, NOx SO2 SO2 w odniesieniu do jednostki masy paliwa i wartości opałowej paliwa. Wskaźniki emisji CO, NOx, SO2 wyznaczone metodą wskaźnikową były obciążone dużym błędem. W przypadku wskaźników emisji CO NOx wynikało to z przebiegu procesu spalania, który dla badanych biopaliw nie zawsze przebiegał jednakowo sprawnie i bezproblemowo, co wpływało na uzyskiwaną moc kotła. Podczas prowadzonych testów spalania, kiedy kocioł osiągał moc znamionową i maksymalne obciążenie, wskaźniki emisji CO wyznaczone metodą wskaźnikową były o wiele wyższe od wyznaczonych empirycznie. Natomiast wskaźniki emisji NOxwyznaczone metodą wskaźnikową były niższe niż wyznaczone empirycznie. Wynika stąd, że wyznaczanie wskaźników emisji metodą wskaźnikową dla paliw biomasowych może być obarczone bardzo dużym błędem i nie informować o rzeczywistej emisji z kotłów małej mocy zainstalowanych w indywidualnych gospodarstwach domowych. Ponieważ proces spalania jest bardzo wrażliwy na warunki w jakich zachodzi, a niewielka ich zmiana może spowodować duże zmiany wskaźników emisji, nie można uznać, że wskaźniki emisji uzyskane w przeprowadzonych badaniach mogą stanowić bezdyskusyjne źródło informacji o emisjach z instalacji tego typu. Niezbędne są dalsze badania emisji z uwzględnieniem różnych typów urządzeń, szerokiej gamy ich modeli i technologii oraz różnych paliw biomasowych. Wyniki tych badań pozwolą na opracowanie dokładniejszych wskaźników unosu dla paliw biomasowych oraz na precyzyjniejsze szacowanie wskaźników emisji.
Źródło:
Rocznik Ochrona Środowiska; 2019, Tom 21, cz. 1; 378-394
1506-218X
Pojawia się w:
Rocznik Ochrona Środowiska
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-6 z 6

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies