Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Box-Behnken Design" wg kryterium: Temat


Wyświetlanie 1-3 z 3
Tytuł:
Extraction and optimization of Mucuna pruriens for dyeing of leather
Autorzy:
Sundari, N.
Powiązania:
https://bibliotekanauki.pl/articles/779092.pdf
Data publikacji:
2015
Wydawca:
Zachodniopomorski Uniwersytet Technologiczny w Szczecinie. Wydawnictwo Uczelniane ZUT w Szczecinie
Tematy:
leaching
Mucuna pruriens
extraction
Box-Behnken design
dyeing of leather
Opis:
The present study reports on the leaching of natural pigment from Mucuna pruriens for dyeing of chrome tanned leather samples. The experiments were performed at temperature (30-70°C), time (30-90 min), feed to solvent ratio (1:3-1:7) and particle size (0.25-0.75 mm) using ethanol as solvent. The influence of process variables on percentage yield has been studied and the conditions were optimized using Box-Behnken design. The optimized conditions for intensified extraction was found to occur at a temperature of 60°C, extraction time of 1 hr, for a feed to solvent ratio of 1:5 and 0.75 mm particle size. The % yield under optimized conditions was found to be 47%. The extraction results were found to agree well with the statistical model (R2 = 0.9740). The colouring ability of extracted dye has been tested on wet blue goat leathers. The dyed leather exhibited a better colour value, strength and fastness properties as inferred from reflectance and visual assessment tests.
Źródło:
Polish Journal of Chemical Technology; 2015, 17, 2; 57-63
1509-8117
1899-4741
Pojawia się w:
Polish Journal of Chemical Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Enzymatic bioconversion of feather waste with keratinases of Bacillus cereus PCM 2849
Autorzy:
Ciurko, Dominika P.
Łaba, Wojciech
Piegza, Michał
Juszczyk, Piotr
Choińska-Pulit, Anna
Sobolczyk-Bednarek, Justyna
Powiązania:
https://bibliotekanauki.pl/articles/778229.pdf
Data publikacji:
2019
Wydawca:
Zachodniopomorski Uniwersytet Technologiczny w Szczecinie. Wydawnictwo Uczelniane ZUT w Szczecinie
Tematy:
feather waste
Bacillus cereus
Box-Behnken design
hydrolysis
thermo-chemical pretreatment
Opis:
Enzymatic preparation from culture of keratinolytic Bacillus cereus PCM 2849 was applied for hydrolysis of whole chicken feathers, after sulphitolytic pretreatment. This process was optimized using a three-factor Box-Behnken design, where the effect of substrate concentration, sulphite concentration during pretreatment and reaction temperature was evaluated on the release of amino acids. Obtained results revealed the highest impact of reaction temperature, followed by substrate content and sulphite during pretreatment. Optimal process conditions were established, i.e. temperature 44.4°C, feathers 4.7% and treatment with 25.3 mM sulphite. Amino acid composition of the obtained hydrolysate was analyzed. Glutamic acid (9.21 g·kg−1) and proline were dominant, however significant amount of branched-chain amino acids was also observed. The FTIR analysis of residual substrate revealed the cleavage of disulphide bonds in keratin through the presence of thioester residues. The absence of reduced cysteine residues was confirmed, along with minor changes in proportions of keratin substructures.
Źródło:
Polish Journal of Chemical Technology; 2019, 21, 3; 53-59
1509-8117
1899-4741
Pojawia się w:
Polish Journal of Chemical Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Performance evaluation of chemical coagulation process to treat bagasse wastewater : modeling and optimization
Autorzy:
Thirugnanasambandham, K.
Sivakumar, V.
Shine, K.
Powiązania:
https://bibliotekanauki.pl/articles/779435.pdf
Data publikacji:
2016
Wydawca:
Zachodniopomorski Uniwersytet Technologiczny w Szczecinie. Wydawnictwo Uczelniane ZUT w Szczecinie
Tematy:
bagasse wastewater
chemical coagulation, ferric chloride
Box-Behnken design
sludge
operation
cost
optimization
Opis:
In this present study, chemical coagulation process (CC) treatment process was investigated under different conditions such as pH, ferric chloride dose, agitation time and settling time to treat bagasse wastewater using response surface methodology (RSM). The outcomes were evaluated using Pareto analysis of variance (ANOVA) and second order polynomial models were created with the aim of being able to predict the responses. Ideal conditions were observed to be as per the following: agitation time of 25 min, pH of 7, ferric chloride dose of 6 g/L and settling time of 60 min. Under these conditions, turbidity removal of 62%, COD removal of 67%, TDS removal 53% and sludge production of 32 mL/L were obtained with operating cost of 3.50 Rupee/L. The mechanism of CC was analyzed using XRD spectrum and founds to be adsorption.
Źródło:
Polish Journal of Chemical Technology; 2016, 18, 1; 99-104
1509-8117
1899-4741
Pojawia się w:
Polish Journal of Chemical Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-3 z 3

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies