Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "GOLD" wg kryterium: Temat


Tytuł:
Comparison of different methods on the enrichment of Konya Inlice epithermal gold ores
Autorzy:
Selçuk, Ayşe Nur Döğme
Güney, Ali
Powiązania:
https://bibliotekanauki.pl/articles/1449684.pdf
Data publikacji:
2020
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
enrichment
falcon concentrator
gold flotation
gold recovery
Opis:
In this study, firstly, enrichment experiments were carried out on the epithermal gold ore belonging to the Konya-İnlice region containing 2.38 ppm Au-containing oxide type ore and 1.39 ppm Au-containing sulfur ore with using Falcon device as a gravity enrichment method. In these group experiments, the effects of parameters such as centrifugal force, bowl type effect, and a solid ration of feeding were investigated. As the second enrichment method, the conventional flotation technique was applied. In these enrichment experiments, appropriate grain size, flotation time, amount of reagent, and amount of depressant, and pH effect were investigated. The results of these tests showed that while a concentrate assaying 4.79 ppm Au content was obtained with 7% recovery with Falcon Concentrator, a concentrate with 8.37 ppm Au content with 36.37 % recovery was obtained with flotation tests. Thus, if the middlings were theoretically distributed, the final concentrate recovery increased to 78.10% recovery increases to 78.10%.
Źródło:
Physicochemical Problems of Mineral Processing; 2020, 56, 1; 147-160
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Application of leaching kinetics modelling to a gold cyanide leach plant by using real plant data
Autorzy:
Sayiner, B.
Powiązania:
https://bibliotekanauki.pl/articles/109738.pdf
Data publikacji:
2015
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
gold
cyanide
leach
kinetics
model
Opis:
Gold cyanide leach kinetics modeling was applied to the Bergama Ovacik gold cyanide leach plant in Turkey by processing the real plant data without need of any laboratory work. For this aim, solid ore samples were taken from each leaching tanks and analysed for gold contents as Au ppm while plant variables such as solid % concentrations in each tank, feed rate of plant as megagrams per hour (Mg/h), slurry flow rate as m3/h and the slurry residence times in each tank calculated and noted for modelling study. Five sampling work performed at plant at different times. Each sampling data were modelled seperately by the Anglo-American Research Laboratories (AARL) leach kinetics model to obtain five seperate model parameters and regression coefficient (R2) values. Then, total five sampling data were all together modelled to obtain just one model equation and R2 value to represent the plant generally. All R2 values were above 0.90 indicating that the AARL gold leaching kinetics model fits well on real plant leaching conditions. By using the model parameters, the residual gold contents in each tank were predicted for different possible ore feed rate tonnages such as 80, 90, 100, 110 and 120 megagrams per hour. Thus, leaching recoveries for any ore feed rate would be estimated for possible tonnage increases in the future.
Źródło:
Physicochemical Problems of Mineral Processing; 2015, 51, 1; 109-114
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect of hydrogen peroxide and lead(II) nitrate on gold cyanide leaching of Malaysian mesothermal deposit gold ore
Autorzy:
Baharun, Norlia
Ling, Ong Pek
Ardani, Mohammad Rezaei
Ariffin, Kamar Shah
Powiązania:
https://bibliotekanauki.pl/articles/1845218.pdf
Data publikacji:
2020
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
gold cyanidation
mesothermal lode gold
statistical analysis
design of experiment
Van’t Hoff differential method
Opis:
The gold extraction from Malaysian mesothermal lode gold ore through the cyanidation method was performed. The effect of hydrogen peroxide (H2O2) and lead nitrate Pb(NO3)2 were investigated on the percentage of gold recovery. The statistical analysis method using a response surface design-central composite design was applied to find the optimum condition for gold extraction. The studied parameters were NaCN concentration (300-500 ppm), H2O2 concentration (205-410 ppm), and Pb(NO3)2 concentration (50-150 ppm). It was found that increasing the amount of NaCN and H2O2 as well as decreasing the amount of Pb(NO3)2 in the studied range, increased the gold recovery. The analysis of variance suggested the linear model for the gold extraction with the optimum condition at 467.3 ppm NaCN, 94.96 ppm Pb(NO3)2, and 340 ppm H2O2. The gold extracted from the ore at the optimum condition was 88.97% as compared to 62.02% from conventional cyanidation. The characterization study of the gold ore indicated that the finely gold particles interlocked in the aluminosilicate phase (grain size of ~10.0 μm). The Van’t Hoff differential method justified that the cyanidation was of second order with a specific reaction rate of 0.0501/hour.
Źródło:
Physicochemical Problems of Mineral Processing; 2020, 56, 5; 905-918
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Microanalysis study of Al-Amar rock and leaching behavior of its tailings for recovery of gold and silver
Autorzy:
Mahmoud, M. H. H.
Awad, H. M.
Altalhi, T.
Powiązania:
https://bibliotekanauki.pl/articles/109620.pdf
Data publikacji:
2018
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
gold
silver
tailings
mineralogy
extraction
thiosulfate
Opis:
Some Saudi gold ores, such as that at Al-Amar mine, suffer from low leaching efficiency using the toxic cyanidation process. Only about 60% of the gold and 26% of the silver in the feed ore can be extracted at 0.2% CN– after 24 h and the rest percentages of these metals remained in leaching residues (tailings). These tailings contained 1.1 ppm Au and 4.3 ppm Ag. Reprocessing of tailings serves both for economic and environmental reasons. A petrography analysis of the mineral constituents indicated that the rock samples consisted primarily of sphalerite, chalcopyrite, pyrite and galena in decreasing order of abundance. An electron probe microanalysis quantitatively showed that gold and silver were finely distributed in the grain boundaries and within sphalerite, chalcopyrite, pyrite, and quartz. The dissemination of gold and silver in these hard minerals may be the main reason for their low recovery by cyanidation. Open air roasting of the tailings can release amounts of the disseminated gold and silver which can be extracted during leaching with the harmless thiosulfate ion S2O32–. After studying the different parameters, we found that the maximum possible extraction of gold and silver from the tailings roasted for 2 h at 400°C reached about 50% at 0.2 M ammonium thiosulfate, 0.3 M ammonium hydroxide, solid–liquid ratio ½ for 24 h. These achievements represent a possible exploitation of the accumulated 1.65 million Mg tailing waste containing significant amounts of gold and silver valued at about $73 million.
Źródło:
Physicochemical Problems of Mineral Processing; 2018, 54, 2; 527-537
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Thiosulfate-copper-ammonia leaching of pure gold and pressure oxidized concentrate
Autorzy:
Porvali, A.
Rintala, L.
Aromaa, J.
Kaartinen, T.
Forsen, O.
Lundstrom, M.
Powiązania:
https://bibliotekanauki.pl/articles/110672.pdf
Data publikacji:
2017
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
gold leaching
thiosulfate
quartz crystal microbalance
Opis:
In this research cyanide-free leaching of pure gold and pressure oxidized refractory gold concentrate by thiosulfate-copper-ammonia solutions were examined. A quartz crystal microbalance (QCM) was used to study gold leaching as a factorial series where the best gold leaching rate (2.987 mg/(cm2∙h)) was achieved with a solution consisting of 0.2 M (NH4)2S2O3, 1.2 M NH3, 0.01 M CuSO4 and 0.4 M Na2SO4. Temperature had the greatest effect on the gold leaching rate. An increase in thiosulfate concentration (0.1–0.2 M) increased gold dissolution. The combined effect of temperature and ammonia concentration had a statistically significant effect on the gold leaching rate at 0.1 M M2S2O3. Combination of applied potential and NH3:S2O3 ratio had a statistically significant effect on the gold leaching rate at 0.2 M M2S2O3. An increase in applied potential decreased the gold dissolution rate at low ammonia concentrations but increased it at high concentrations. A pressure oxidized gold concentrate was leached for 6 hours in the batch reactor leaching experiments. The effect of rotative velocity (1.26–1.56 m/s) and slurry density (10–30 wt%) was investigated at the following leaching parameters: 0.2 M Na2S2O3, 0.6 M NH3, 0.01 M CuSO4, 0.4 M Na2SO4. Lower slurry density (10 wt%) resulted in a higher Au leaching efficiency. An increase in the rotation rate did not have an effect on the final Au leaching recovery. The best Au leaching efficiency (89%) was achieved with 590 rpm mixing, 1.56 m/s rotative velocity and 10 wt% slurry density.
Źródło:
Physicochemical Problems of Mineral Processing; 2017, 53, 2; 1079-1091
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Preg-robbing of gold in chloride-bromide solution
Autorzy:
Ahtiainen, R.
Lundstrom, M.
Powiązania:
https://bibliotekanauki.pl/articles/110931.pdf
Data publikacji:
2016
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
gold
leaching
pre-robbing
hydrometallurgy
carbon
Opis:
One of the major issue in gold chloride leaching is a tendency of gold to either precipitate or adsorb on a carbonaceous matter in an ore, i.e. preg-robbing. This paper discusses issues related to a preg-robbing phenomenon in gold hydrometallurgy, specifically in gold chloride-bromide leaching. This phenomenon has been observed in the 1800s to decrease gold recovery during gold chlorination as well as the state-of-art of gold cyanidation processes. The experiments were conducted in order to study the preg-robbing phenomenon in chloride-bromide media. The tendency of preg-robbing was demonstrated by adding carbon in a non-preg-robbing ore. It was shown that the preg-robbing tendency in the chloride-bromide media was very strong. Addition of 0.01% w/w of carbon powder into the non-preg-robbing ore decreased gold recovery from 92 to 70% and addition 5% w/w of carbon decreased gold recovery to almost zero.
Źródło:
Physicochemical Problems of Mineral Processing; 2016, 52, 1; 244-251
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Influence of lead nitrate on cyanide leaching of gold and silver from turkish gold ores
Autorzy:
Sayiner, B.
Powiązania:
https://bibliotekanauki.pl/articles/109335.pdf
Data publikacji:
2014
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
lead nitrate
gold
silver
cyanide leaching
Opis:
Effect of lead nitrate addition on cyanidation of Havran, Ovacık, Mastra LCu (low copper) and Mastra HCu (high copper) gold ores was investigated by laboratory tests at the Ovacik Gold Mine Metallurgy Laboratory. Leach tests were performed at optimum NaCN additions and pH values while different lead nitrate additions were applied. Ovacik cyanidation plant leaching time, 24 hours for the constant 100 Mg/h ore feed rate was applied as optimal for all lead nitrate tests. Results showed the increase in gold and silver recoveries between 0.4-1.2% for gold and 3.9-11.6% for silver at the end of 24 hours leaching by the addition of lead nitrate as 0.1-0.5 kg/Mg. NaCN consumption decreased or did not change except for the Ovacik ore. In the case of the Ovacik ore it slightly increased.
Źródło:
Physicochemical Problems of Mineral Processing; 2014, 50, 2; 507-514
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Pressure oxidation of pyrite-arsenopyrite refractory gold concentrate
Autorzy:
Rusanen, L.
Aromaa, J.
Forsen, O.
Powiązania:
https://bibliotekanauki.pl/articles/110051.pdf
Data publikacji:
2013
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
gold ore
hydrometallurgy
leaching
factorial design
Opis:
Refractory gold ores have poor gold recoveries with direct cyanide leaching. Typically the refractoriness is due to encapsulation of the gold particles inside the host mineral. To liberate gold for leaching the host mineral must be broken by mechanical or chemical means. The aim of this study was to study the effect of temperature, oxygen partial pressure and slurry density on pressure oxidation of pyrite-arsenopyrite gold concentrate. Batch oxidation tests in an autoclave were done using a factorial design. Different responses were measured and analysed to study effect of the three factors and oxidation kinet-ics. Generally, high slurry density required high temperature and oxygen partial pressure to reach com-plete oxidation. Oxidation kinetics at 225°C temperature, with 1050 kPa oxygen partial pressure and 15% slurry density was found to be fastest resulting in complete conversion of sulfides in 30 minutes. At 195°C, 700 kPa oxygen partial pressure and 10% slurry density, the oxidation kinetics for complete sul-fide conversion was about 60 minutes. Slurry densities above 10% had an adverse effect on the oxidation rate, when the temperature was below 225°C and oxygen partial pressure below 1050 kPa.
Źródło:
Physicochemical Problems of Mineral Processing; 2013, 49, 1; 101-109
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Gold leching from a Saudi ore by the nonpolluting thiosulfate process
Autorzy:
Mahmoud, M. H. H.
Awad, H. M.
Elhabib, O. A.
Powiązania:
https://bibliotekanauki.pl/articles/110379.pdf
Data publikacji:
2015
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
gold
extraction
leaching
thiosulfate
Saudi ore
Opis:
In all working Saudi gold mines, ores are treated using the hazardous cyanidation process. Some Saudi gold ores, such as Al-Amar, is known to be refractory to cyanidation. In this work, we have examined the extraction of gold from Al-Amar gold ore by the much environmentally safer and efficient thiosulfate process. The run of mine (ROM) and carbon-in-leach (CIL) feed, that is obtained after separation of copper concentrate from ROM, samples were found to contain 6.5 and 3.6 ppm gold, respectively. The mineralogical microscopic investigations of ROM samples confirmed that fine gold specks were scattered and encapsulated inside sulfide or quartz base minerals. This could explain the expected reason of the difficult leaching of gold by cyanidation. The X-ray diffraction analysis showed that the CIL feed contained quartz, pyrite, sphalerite and chlorite minerals. After detailed leaching studies of CIL feed, almost 70% of gold could be extracted at 0.2 M ammonium thiosulfate and 0.3 M ammonium hydroxide after 24 h. Addition of copper(II) as <0.2 mM only slightly enhanced the gold leaching in the ammoniacal thiosulfate solution. Gold leaching drastically decreased as the concentration of copper(II) increased 0.2 mM due to the degradation of S2O3²¯.
Źródło:
Physicochemical Problems of Mineral Processing; 2015, 51, 1; 59-72
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Gold recovery from refractory gold concentrates by pressure oxidation pre-treatment and thiosulfate leaching
Autorzy:
Yu, Li
Li, Shimei
Liu, Quanjun
Deng, Jiushuai
Luo, Bin
Liang, Yuanqin
Zhao, Liuchuang
Lai, Hao
Powiązania:
https://bibliotekanauki.pl/articles/110871.pdf
Data publikacji:
2019
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
gold
pressure oxidation
thiosulfate
leaching
RSM
Opis:
Naturally, refractory gold is enclosed by sulfide minerals such as pyrite and arsenopyrite and a higher content of organic carbon, which results in difficulty in the recovery of gold. In this study, the flotation gold concentrate before and after pressure oxidation (POX) was analyzed. The analysis of the Eh-pH diagram revealed that pyrite/arsenopyrite would be dissolved in higher oxidation potential. Results of SEM-EDS showed that the surface of minerals became very rough and structure of some particles was destroyed after POX. The XRD measurement showed that pyrite was oxidized to jarosite, and gangue minerals such as quartz and organic carbon were hardly changed. The process of thiosulfate leaching of gold was designed and optimized according to Miscellaneous implemented by Response Surface Methodology (RSM). Based on the results of ANOVA, leaching model was significant. In leaching, [S2O32-] played an important role and the interactions between [S2O32-] and [Cu2+] were significant. The effect of [HA] was relatively weak. Optimum process parameters of the initial reagent concentration were 505.00 mM for [S2O32-], 34.77 mM for [Cu2+], and 0.50 mM for [HA]. Under these conditions, the Au extraction value was about 86.21%, which was significantly higher than that obtained with leaching directly.
Źródło:
Physicochemical Problems of Mineral Processing; 2019, 55, 2; 537-551
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Improved flotation of auriferous arsenopyrite by using a novel mixed collector in weakly alkaline pulp
Autorzy:
Wang, Xiaohui
Zhao, Kaile
Bo, Hui
Yan, Wu
Wang, Zhen
Gu, Guohua
Gao, Zhiyong
Powiązania:
https://bibliotekanauki.pl/articles/1845220.pdf
Data publikacji:
2020
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
gold mine
arsenopyrite
mixed collector
flotation
Opis:
The purpose of using a mixed collector is to increase both flotation efficiency and selectivity. The mixed collector of potassium isopentyldithiocarbonate and N-dodecyl mercaptan exhibits high efficiency for the flotation of auriferous arsenopyrite, and the 2:1 mixing mass ratio of potassium isopentyldithiocarbonate and N-dodecyl mercaptan is preferred. Batch flotation tests indicate that a concentrate with the grade of 47.58 g/Mg Au and the recovery of 86.45% Au is achieved by using the mixed potassium isopentyldithiocarbonate/N-dodecyl mercaptan in weakly alkaline pulp. The collector mixture potassium isopentyldithiocarbonate + N-dodecyl mercaptan has greater adsorption density on the arsenopyrite surface than other conventional mixed collectors. The mixed potassium isopentyldithiocarbonate/N-dodecyl mercaptan can adsorb onto the arsenopyrite surface by intense chemisorptions, and the Sulfur-Iron chemical complexation is considered as the main adsorption mode. This is the reason why mixed potassium isopentyldithiocarbonate and N-dodecyl mercaptan collector can improve the flotation efficiency of auriferous sulfides.
Źródło:
Physicochemical Problems of Mineral Processing; 2020, 56, 5; 996-1004
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Physical separation route for printed circuit boards
Autorzy:
Burat, F.
Özer, M.
Powiązania:
https://bibliotekanauki.pl/articles/109975.pdf
Data publikacji:
2018
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
physical methods
PCBs
environment
copper
gold
silver
Opis:
Recently, the consumption of electrical and electronic equipment (EEE) has increased with the advanced technology. A wide range of components made of metals, plastics and other substances are contained in EEE. Electronic waste (e-waste) is easily demounted and separated by manually methods; however, printed circuit board (PCB) which is one the most common components of e-waste need to be recycled with economic and environmental technologies. In this paper, employing physical separation methods to ground waste PCB, an eco-friendly, simple and environmental process for separation of valuable metals was designed and proposed. A heavy fraction with 40.8% Cu, 350 ppm Au and 475 ppm Ag content at recovery of 95.4% Cu, 77.7% Au and 65.1% Ag was obtained from a feed assaying 12% Cu, 130 ppm Au and 200 ppm Ag using shaking table separator. Cu grade was increased from 52.4% to 73.9% with the recovery over 92% by dry magnetic separator and copper alloys were separated from the waste matrix with 98% Cu recovery using electrostatic separator.
Źródło:
Physicochemical Problems of Mineral Processing; 2018, 54, 2; 554-566
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Modeling of the carbon in pulp (cip) process in gold cyanide leaching plants using the plant data
Autorzy:
Sayiner, B.
Powiązania:
https://bibliotekanauki.pl/articles/110084.pdf
Data publikacji:
2014
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
modeling
cyanide leaching
activated carbon
adsorption
gold
Opis:
An improved method to model CIP plants by plant data is presented. The Turkish gold cyanide leaching CIP plants, Bergama Ovacik, Gumushane Mastra and Eskisehir Kaymaz were modeled by using gold concentrations of monthly carbon, solution and solids spot samples of adsorption tanks without a need of laboratory work. Five carbon adsorption models were used namely k-n, Nicol-Fleming, Dixon, Film Diffusion with Langmuir isotherm and Film Diffusion with Freundlich isotherm (Johns model). Several monthly obtained plant data were collected and modeled separately and model parameters as well as regression coefficient R2 values were found by non-linear regression. By comparing R2 values, the best fit model for the three CIP plants was determined as Film Diffusion with Langmuir Isotherm that R2 values were above 0.95. Thus, by using the best fit model, the Kaymaz plant was optimized for existing 49 Mg per hour ore feed tonnage and plant parameters were predicted according to planned feed tonnage increase to 120 Mg per hour.
Źródło:
Physicochemical Problems of Mineral Processing; 2014, 50, 2; 841-852
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Investigation of the effect of cyanidation after microwave roasting treatment on refractory gold/silver ores by characterization studies
Autorzy:
Yoğurtcuoğlu, Emine
Powiązania:
https://bibliotekanauki.pl/articles/2200333.pdf
Data publikacji:
2023
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
pretreatment
microwave
cyanidation
characterization
refractory gold-silver
Opis:
In this article, the efficiency of microwave pretreatment, which is an environmentally friendly, low-energy consuming method for recovery from refractory gold-silver ores, was investigated. The ore sample belonged to the oxidized Bolkardağ deposit, which contains carbonate (calcite, dolomite, smithsonite, hydrozincite), silicate (quartz, hemimorphite), sulfate (beudantite, plumbo-jarosite), and iron oxy/oxyhydroxide (hematite, limonite) minerals. Sulfur/sulfate-bearing silver and gold minerals are found either together with gangue minerals or in inclusions. Approximately 90% gold and 48% silver recovery efficiencies were achieved with the cyanide process after microwave preroasting from the ore. Additionally, the ore, heat treatment product, and waste samples were investigated by characterization studies. In these studies, bond structures, mineral content, sample mass losses, element percentage content differences, and mineral percentage content differences in the samples were determined. As a result, the microwave pretreatment application in cyanidation was presented as a new research topic in terms of its application in the valuable refractory content of this type of oxide.
Źródło:
Physicochemical Problems of Mineral Processing; 2023, 59, 1; art. no. 157487
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Mineralogical study and enhanced gravity separation of gold-bearing mineral, South Eastern Desert, Egypt
Autorzy:
El-Sayed, Samah
Abdel-Khalek, N. A.
El-Shatoury, E. H.
Abdel-Motelib, A.
Hassan, M. S.
Abdel-Khalek, M.A.
Powiązania:
https://bibliotekanauki.pl/articles/1845207.pdf
Data publikacji:
2020
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
gold
mineralogy
petrography
gravity separation
Falcon concentrator
Opis:
El-Hudi gold deposit, located in the South Eastern Desert of Egypt, represent large vein- type gold occurrence. The representative sample revealed the abundance of quartz as main constituent with minor amounts of mineral impurities. Gold was detectable (12 g/t) as determined using atomic absorption. The petrographic study revealed that the gold grains ranged from 10-40 μm. The grain boundaries of quartz are highly stained with iron minerals as hematite and limonite. Sericite mineral is common in discrete gold-bearing veins. Eroded pyrite was detected with high alteration leaving only cubic-shaped cavities behind. Different techniques for gravity separation were used to separate gold from the quartz mineral. After crushing and grinding of the sample, shaking table was used to upgrade the coarser fractions while Falcon concentrator was employed to upgrade the fine fraction. The best concentrate was obtained through grinding the whole sample to less than 0.2 mm, followed by cleaning steps. The gold content is increased from 12 to 145 g/t with total recovery of 78%.
Źródło:
Physicochemical Problems of Mineral Processing; 2020, 56, 5; 839-848
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies