Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Ibrahim, Ibrahim A." wg kryterium: Autor


Wyświetlanie 1-3 z 3
Tytuł:
Exploitation of industrial solid wastes for preparing zeolite as a value-added product and its kinetics as adsorbent for heavy metal ions
Autorzy:
Abdel-Hameed, Reham Mohamed
Abdel-Aal, Elsayed A.
Farghaly, Fatma E.
Ibrahim, Ibrahim A.
Abdel Khalek, Mohamed A.
Ahmed, Mohamed A.
Abdel-Messih, Micheal F.
Powiązania:
https://bibliotekanauki.pl/articles/1448799.pdf
Data publikacji:
2021
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
zeolite P
aluminium wastes
hydrothermal process
metal ion removal
aluminum waste
Opis:
Aluminum and fumed silica as solid industrial wastes were converted to zeolite NaPas a value-addedproduct without any template. The hydrothermal process was optimized using static autoclave. The crystallization was carried out at 100, 120 and 150°C for 24, 48 and 72 h. The prepared zeolite of Si:Al ratio of 1.2 was characterized using X-ray Diffraction (XRD), Scanning Electron Microscope (SEM) provided with Energy Dispersive Spectroscopy (EDS), Surface Area, Fourier Transmitted Infra-Red (FTIR) and Thermal Analysis (TG-DSC). The crystalline phase was formed at 100°Cafter 72 hours and at 120°C after 48 hours, while it was formed after 24 honlyat 150°C. Increasing temperature and time lead to the conversion of the prismatic gibbsite crystals into plate-like structure of zeolitewhich is then formedcauliflower-like structure.The prepared zeolite was employed as adsorbent for $Ni^{2+}$ and $Cu2+ions from aqueous solution.The kinetic studies of adsorption processes were performed.
Źródło:
Physicochemical Problems of Mineral Processing; 2021, 57, 1; 87-99
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Celestite upgrading by jigs in presence of steel balls as ragging material
Autorzy:
Sobhy, Ahmed
El-Midany, Ayman A.
Ibrahim, Susan S.
Powiązania:
https://bibliotekanauki.pl/articles/1447020.pdf
Data publikacji:
2021
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
celestite
calcite
jigging
ragging material
gravity separation
statistical analysis
Opis:
Gravity separation using jigs is widely used for coarse particle sizes separation. However, fine sizes reduce jig performance. In this study, the upgrading of celestite ore by jig was investigated at different size fractions in the presence of ragging material. Three size fractions, i.e., -15+2 mm, - 2.0 + 0.50 mm and - 0.50 + 0.08 mm were used. The steel balls were used, as ragging material, to improve the separation of fines as well as to improve the concentrate quality. The statistical design was used to correlate celestite grade and recovery with studied operating variables, i.e., the ragging number of layers, ragging balls diameter, and separation time, at a fixed water flow rate and stroke length. The design results indicated that the ragging balls diameter and their number of layers play an important role. The smaller the ragging balls diameter and the higher the ragging number of layers are the better the concentrate grade but the longer the separation time. A celestite concentrate of (> 95% SrSO4) with 74.5% recovery was obtained for - 2.0 + 0.50 mm size fraction at the optimum conditions; i.e., 3.1 mm ragging balls diameter, one ragging layers, and 15 minutes separation time.
Źródło:
Physicochemical Problems of Mineral Processing; 2021, 57, 5; 118-128
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Hydrometallurgical treatment of non-sulfide zinc ore for precipitation of zinc oxide nanoparticles
Autorzy:
Abdel-Aal, E.-S. A.
Rashad, M. M.
El-Shazly, A. N.
Ibrahim, I. A.
El-Shahat, M. F.
Powiązania:
https://bibliotekanauki.pl/articles/110748.pdf
Data publikacji:
2016
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
zinc ore
sulfuric acid leaching
filtration rate
zinc sulfate
zinc oxide nanoparticles
MB photocatalytic degradation
Opis:
Acid leaching of Egyptian zinc ore from the Um Gheig area was carried out with sulfuric acid. This study determines the optimum conditions for dissolution of non-sulfide zinc ore. The optimum conditions are 25% -74m particle size, 45 °C temperature, 2 h leaching time, 1.1 stoichiometric molar ratio of H2SO4 to Zn, 1:3 solid/liquid ratio. The maximum filtration rate is 1.6 Mg Zn•m-2•day-1at pressure difference of 0.80 bar. The zinc recovery is about 90%. As the zinc ore contains zinc silicate, some additives were tested to enhance filtration and prevent formation of silica gel. To increase the added value of the product, zinc oxide was precipitated by a co-precipitation method in a nanosize powder with average particle size ~ 20 nm. Photocatalytic degradation of methylene blue dye under UV light using ZnO nanopowders produced at different conditions was investigated. Photocatalytic efficiency with methylene blue (MB) concentration was reduced as much as 85% in 240 min with the produced nanoparticles.
Źródło:
Physicochemical Problems of Mineral Processing; 2016, 52, 2; 729-737
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-3 z 3

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies