Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Hu, D." wg kryterium: Autor


Wyświetlanie 1-2 z 2
Tytuł:
Study on pre-concentration efficiency of wolframite from tungsten ore using gravity and magnetic separations
Autorzy:
Lu, D.
Wang, Y.
Jiang, T.
Sun, W.
Hu, Y.
Powiązania:
https://bibliotekanauki.pl/articles/109597.pdf
Data publikacji:
2016
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
tungsten ore
pre-concentration
separation efficiency
gravity separation
magnetic separation
Opis:
Pre-concentration is effectively applied in recovering wolframite from tungsten ore, due to its benefits of further upgrading tungsten ore and improving separation efficiency. The most important pre-concentration techniques for tungsten ore include gravity separation and magnetic separation, based on the fact that there are appreciable differences, between the desired wolframite and the gangue minerals, in density and magnetic susceptibility. This study investigated the separation efficiency of gravity pre-concentration (Falcon Concentrator) and high-gradient magnetic pre-concentration (SLon VPHGMS) for the beneficiation of a Canada tungsten ore. It is a low-grade type of ore with high silica and arsenic content, and an average content of WO3 is about 0.45%. The optimum conditions for different operational parameters of two pre-concentration separators were studied on this low-grade material. The results presented in this paper suggested that although both pre-concentration techniques were effective for producing pre-concentrates containing high WO3, magnetic pre-concentration showed significantly better separation efficiency. Over 90% of the feed was rejected as the final tailings, meanwhile, over 85% of arsenic minerals were removed with tailings, while the WO3 loss was less than 15%.
Źródło:
Physicochemical Problems of Mineral Processing; 2016, 52, 2; 718-728
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Reverse flotation of ultrafine magnetic concentrate by using mixed anionic/cationic collectors
Autorzy:
Lu, D.
Hu, Y.
Li, Y.
Jiang, T.
Sun, W.
Wang, Y.
Powiązania:
https://bibliotekanauki.pl/articles/110550.pdf
Data publikacji:
2017
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
ultrafine magnetite
collector mixture
reverse flotation
closed flotation
Opis:
Compared to reverse cationic flotation, the advantages of reverse anionic flotation include relatively lower sensitivity to slimes and lower reagent cost. Besides, anionic collectors were found to have excellent capability of selectively separating an ultrafine magnetite ore. Addition of a small amount of cationic collector into the anionic collector as the collector mixture can improve the metallurgical results of removing silicates in reverse flotation. In this paper, NaOL and DDA were used for reverse flotation of the ultrafine magnetic concentrate. The separation performance of the collector mixture was investigated at different ratios of NaOL and DDA. The results showed that a better separation performance was obtained for the collector mixture than for NaOL alone. There was an optimal molar ratio between NaOL and DDA equal to 10:1. In the flotation system with the presence of the collector mixture, the good selectivity was found when starch was used as a depressor for magnetite and CaO was used as an activator for quartz. The influences of starch and CaO dosages on the separation performance of magnetite, quartz and chlorite had been investigated through micro-flotation tests. The infrared spectral analysis showed stretching vibration peaks of chemical adsorption of the collector mixture on the magnetite surface. The peaks were not present when starch was used as the depressor for magnetite. The closed flotation tests on the magnetic concentrate with the particle size of -25 μm were performed in the laboratory. The Fe concentrate assaying 64.52 % was obtained with Fe recovery of 80.66%, for the Fe content of feed equal to 52.98%.
Źródło:
Physicochemical Problems of Mineral Processing; 2017, 53, 2; 724-736
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-2 z 2

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies