Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Zhao, Y." wg kryterium: Wszystkie pola


Wyświetlanie 1-9 z 9
Tytuł:
Effects of colloidal montmorillonite particles on froth flotation of graphite, galena and fluorite
Autorzy:
Chen, T.
Zhao, Y.
Li, H.
Song, S.
Powiązania:
https://bibliotekanauki.pl/articles/110589.pdf
Data publikacji:
2017
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
montmorillonite
graphite
galena
fluorite
slime coating
entrainment
Opis:
The effect of colloidal montmorillonite (MMT) on froth flotation of graphite, galena and fluorite was investigated in this work. The results showed that the presence of sufficient amount of colloidal MMT particles in the mineral slurry would be detrimental of flotation by reducing the recovery of minerals. This observation was attributed to slime coating of MMT on the coarse valuable mineral particles and entrainment of MMT particles in the froth product together with water in the triangle froth zones. The former would reduce the recovery of the valuable minerals because of hydrophilic MMT coating. The latter would decrease the concentrate grade. The degree of slime coating depended on slurry pH, while the degree of entrainment was closely related to water recovery. It was also found that slime coating was a dominant factor in mineral flotation in acidic pH regions in the presence of colloidal MMT particles.
Źródło:
Physicochemical Problems of Mineral Processing; 2017, 53, 2; 699-713
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Mechanisms for the improved flotation of inherently hydrophobic graphite in electrolyte solution
Autorzy:
Lai, Q.
Liao, Y.
Liu, Z.
He, Y.
Zhao, Y.
Powiązania:
https://bibliotekanauki.pl/articles/110761.pdf
Data publikacji:
2018
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
flotation
graphite
low-grade
electrolyte
Opis:
It is well documented that unavoidable ions in a pulp such as Mg2+, Ca2+, and K+ have a significant effect on the interaction for particles, especially for flotation of metallic sulfide minerals and clay minerals. In this study, the effect of electrolytes on the flotation of inherently hydrophobic mineral-graphite was studied. It was found that the zeta potential showed a dramatic decrease, and the reagent adsorption capacity of mineral enhanced in the present of electrolytes. The possible mechanism responsible for improved recovery was investigated by electrokinetic, surface tension and ions adsorption tests. It is likely that the hydrophobic force is stronger than the electrostatic force due to the reduced potential of graphite. This might be in favor of the formation of hydrophobic oil film leading to an increase in the graphite floatability. The experiments provided a new spectacle to study inherently hydrophobic mineral processing with electrolyte solution.
Źródło:
Physicochemical Problems of Mineral Processing; 2018, 54, 3; 944-954
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Improving separation efficiency of 6-1 mm coal by introducing vibration energy to dense medium gas-solid fluidized bed
Autorzy:
He, J.
Zhao, Y.
Luo, Z.
Zhao, J.
Duan, C.
He, Y.
Powiązania:
https://bibliotekanauki.pl/articles/110018.pdf
Data publikacji:
2015
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
vibration energy
dense medium gas-solid fluidized bed
fluidization quality
density uniformity
separation efficiency
Opis:
Effects of the vibration energy on the fluidization quality and separation performance of dense medium gas-solid fluidized bed were investigated experimentally. The magnetite powder with a wide size range of 0.3-0.074 mm was utilized as the basic medium solids. 6-1 mm fine coal sample from Yongcheng (China) was used to perform the separation experiments. The results indicate that the vibration amplitude A and superficial gas velocity U are greatly significant to the fluidization stability and the density distribution uniformity. Comparing with the bed without vibration, the optimal SP and Sρ values of 0.034 kPa and 0.018 g/cm3 are acquired in vibration bed with the operating factors of A = 1 mm, U = 1.8Umf, f = 15 Hz and Hs = 150 mm. The coal ash content was reduced from 27.84% to 9.50% at a separating density of 1.68 g/cm3 with a probable error E value of 0.505. The separation efficiency of 6-1mm fine coal is effectively improved by introducing vibration energy to dense medium gas-solid fluidized bed. The technology provides a novel approach to achieve high-efficiency separation of 6-1 mm fine coal in the arid and water-shortage areas.
Źródło:
Physicochemical Problems of Mineral Processing; 2015, 51, 1; 95-108
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Regional features analysis of plugged holes of dense phase gas-solid separation fluidized bed
Autorzy:
Zhang, B.
Zhao, Y.
Luo, Z.
Song, S.
Duan, C.
Dong, L.
Powiązania:
https://bibliotekanauki.pl/articles/109699.pdf
Data publikacji:
2014
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
gas-solid fluidized bed for separation
pressure fluctuation
plugged holes regions
features analysis
plugged holes sensitivity
Opis:
In contrast to traditional coal separation, dry separation does not require water and does not cause water pollution. Dense phase gas–solid fluidized beds are used for dry separation. The plugged holes in the air distributor should be tested to ensure the stability of these beds for particle separation. The pressure fluctuation is sensitive to these plugged holes. This sensitivity can be tested and diagnosed by determining the standard deviation of the pressure fluctuation. In areas with partial blockage, that is the areas with weak fluidization, a decrease in the volume fraction of the particles and in the pressure differences in the transverse of the bed results in an increase of the standard deviation of the pressure fluctuation, thereby stimulating the lateral mixing of medium-sized particles. The standard deviation and the mixing intensity decrease axially. The value of sensitivity of the plugged holes in the air distributor decreases as the height of the bed increases. The features of air distributors affect the surrounding areas. The distribution law determining the influence of plugged holes on the beds is symmetrical. As the blockage of the fluidized bed distributor region increases, the mean square error of the pressure fluctuation in the related regions increases. The intensity of the effect is proportional to the distance to the plugged holes.
Źródło:
Physicochemical Problems of Mineral Processing; 2014, 50, 2; 667-679
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Experimental study on triboelectrostatic beneficiation of wet fly ash using Microwave Heating
Autorzy:
Li, H.
Chen, Y.
Zhang, X.
Zhao, Y.
Tao, Y.
Li, C.
He, X.
Powiązania:
https://bibliotekanauki.pl/articles/110399.pdf
Data publikacji:
2016
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
wet fly ash
triboelectrostatic beneficiation
microwave heating
efficiency
Opis:
Triboelectrostatic beneficiation, as a physical method, of fly ash cannot only meet the technical requirements of fly ash application but also recycle of an unburned carbon as a useful energy source. The aim of this study was to investigate the feasibility of improving efficiency of triboelectrostatic beneficiation of wet fly ash using microwave heating. The wet fly ash with different moisture contents had an average loss-on-ignition of 12.56%. The fly ash samples were heated in a microwave oven before the experiments. The experimental conditions were electric field voltage of 40 kV and air flux ranging from 12 to 30 m3/h. The influence of the microwave heating on the wet fly ash triboelectrostatic beneficiation was discussed under the conditions of different microwave intensity and irradiation time. The results indicated that the removal rate and recycle rate of the unburned carbon showed a significant increase performance as the wet fly ash was processed by the microwave heating which was attributed to changes of moisture contents and dielectric constants caused by the microwave heating. The feasibility had been verified according to the experimental study on fly ash with different moisture contents. It can be concluded that the microwave heating process was efficiently applied for the wet fly ash triboelectrostatic beneficiation.
Źródło:
Physicochemical Problems of Mineral Processing; 2016, 52, 1; 328-341
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Improving spodumene flotation using a mixed cationic and anionic collector
Autorzy:
Wang, Y.
Zhu, G.
Yu, F.
Lu, D.
Wang, L.
Zhao, Y.
Zheng, H.
Powiązania:
https://bibliotekanauki.pl/articles/109883.pdf
Data publikacji:
2018
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
spodumene
lithium
silicates
flotation
anionic surfactant
cationic surfactant
Opis:
Lithium, a rare-earth element, has been in increasing demand. Spodumene flotation is an important and challenging step for lithium extraction and production from lithium ore. In the present work, flotation tests for three pure minerals (i.e., spodumene, quartz and feldspar) and a real spodumene ore were carried out at laboratory scale. The results showed that YOA, a mixture of oleic acid and dodecylamine with the molar ration of 10:1, could be used as collector to produce a spodumene concentrate with grade of 5.59% Li2O from the feed ore with grade of 1.48% Li2O where 85.24% of Li2O was recovered to the concentrate. The measured zeta potential, contact angle and adsorption capacity indicated that YOA was preferentially adsorbed on spodumene instead of on quartz or feldspar, with the spodumene surface being more hydrophobic than that of feldspar or quartz. The adsorption energies of YOA on spodumene were calculated and the results provided insights into the superior flotation performance obtained in the present work.
Źródło:
Physicochemical Problems of Mineral Processing; 2018, 54, 2; 567-577
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Features of distribution of uranium and thorium in red mud
Autorzy:
Gu, H.
Wang, N.
Yang, Y.
Zhao, C.
Cui, S.
Powiązania:
https://bibliotekanauki.pl/articles/110444.pdf
Data publikacji:
2017
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
red mud
uranium
thorium
distribution
perovskite
Opis:
Natural radioactive elements such as uranium and thorium restrict the use of red mud as building materials or additives, and may cause environmental problems. The distribution features of U and Th in red mud was studied from micro and macro analysis, using EPMA, LA-ICP-MS, and methods of mineralogy and beneficiation. Based on the micro-area scanning analysis, main chemical compositions in red mud, such as Ca, Al, Si, Na, and K are dispersive while Fe and Ti mainly tend to concentrate in granular phases. Based on the in-situ analysis, the distribution of main elements and most trace elements in micro-zone of red mud was homogeneous. In micro-zone area, the variation tendency of thorium content was similar with Y in red mud samples. By means of the methods of mineralogy and beneficiation, red mud samples were separated into different fractions. U and Th tend to be enriched in the low density fraction of the red mud. Th presented a high concentration in the finest particle size fractions of the red mud. Neither U or Th was regularly distributed in various magnetic red mud fractions. Thorium fingerprint peaks were determined in perovskite by EDX under TEM, which is proposed to be one of the radioactivity sources in Bayer red mud.
Źródło:
Physicochemical Problems of Mineral Processing; 2017, 53, 1; 110-120
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Flotation kinetics and separation selectivity of coal size fractions
Autorzy:
Li, Y.
Zhao, W.
Gui, X.
Zhang, X.
Powiązania:
https://bibliotekanauki.pl/articles/110676.pdf
Data publikacji:
2013
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
coal
flotation rate
combustible matter recovery
ash
particle size
Opis:
Flotation recovery and kinetics for three size fractions of coal were investigated. Flotation of combustible matter recovery was approximated with the first order kinetic equation while flotation of the ash forming minerals with the second order equation. Next, the equations for each size fraction were combined and a formula was obtained which was used for approximation of the experimental results using the so-called Fuerstenau upgrading curve, which relates the recovery of combustible matter recovery and recovery of ash forming minerals, both in concentrate. The Fuerstenau upgrading plot showed that the best selectivity was obtained for the middle size fraction of 0.25–0.075 mm, while the flotation selectivity of larger 0.5–0.25 mm and smaller –0.075 mm particles was diminished. This finding agrees with many other investigations.
Źródło:
Physicochemical Problems of Mineral Processing; 2013, 49, 2; 387-395
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Investigation of leaching kinetics of cerussite in sodium hydroxide solutions
Autorzy:
Feng, Q.
Wen, S.
Wang, Y.
Zhao, W.
Deng, J.
Powiązania:
https://bibliotekanauki.pl/articles/110621.pdf
Data publikacji:
2015
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
cerussite
sodium hydroxide
leaching
kinetics
activation energy
Opis:
The leaching kinetics of cerussite in alkaline medium was investigated with respect to experimental variables such as sodium hydroxide concentration, temperature, particle size and stirring speed. The results showed that leaching reagent concentration and reaction temperature exerted significant effects on the extraction of lead, whereas particle size and stirring speed exhibited a relatively moderate effect on the leaching rate. The leaching process followed the kinetic law of the shrinking core model, and the dissolution rates were controlled by the surface chemical reaction with an apparent activation energy value of 43.79 kJ/mol. A corresponding dissolution kinetic equation was also proposed to describe the dissolution reaction. The results indicated that sodium hydroxide could be used as an effective leaching reagent for extracting lead from cerussite.
Źródło:
Physicochemical Problems of Mineral Processing; 2015, 51, 2; 491-500
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-9 z 9

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies