Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Chen, Hu" wg kryterium: Autor


Wyświetlanie 1-3 z 3
Tytuł:
Tight focusing of radially polarized beams by a devil’s vortex lens
Autorzy:
Chen, Z.
Hu, X.
Chen, X.
Wang, X.
Pu, J.
Powiązania:
https://bibliotekanauki.pl/articles/173576.pdf
Data publikacji:
2018
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
devil’s vortex lens
radially polarized beam
tight focusing
high numerical aperture
Opis:
Tight focusing of radially polarized beams with a devil’s vortex lens is numerically investigated. Multiple focal spots can be generated in the geometric focus when a radially polarized beam is focused by a high numerical aperture objective in the presence of a devil’s vortex lens. The position of the major focal spot shifts from the geometric focus when a devil’s vortex lens with S = 1 is employed, and the position of the focal spot can be controlled by the numerical aperture of the objective. The intensity components of the major focal spot are influenced by the vortex phase of the devil’s vortex lens. A strong longitudinal component near the optical axis is produced by a devil’s vortex lens without vortex phase, and a nearly pure transversal field is produced by a devil’s vortex lens with vortex phase.
Źródło:
Optica Applicata; 2018, 48, 3; 389-398
0078-5466
1899-7015
Pojawia się w:
Optica Applicata
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
An extrinsic Fabry–Pérot interference fiber sensor for ultrasonic detection of partial discharge
Autorzy:
Zhang, Ximin
Qian, Sen
Liu, Huixin
Chen, Chuan
Deng, Chuanlu
Hu, Chengyong
Huang, Yi
Powiązania:
https://bibliotekanauki.pl/articles/27310090.pdf
Data publikacji:
2023
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
extrinsic Fabry-Pérot interference
fibre sensor
partial discharge
sensitivity
frequency
Opis:
An ultrasonic sensor based on extrinsic Fabry–Pérot interference (EFPI) has been designed and demonstrated to detect the ultrasonic wave signal. The sensitivity and natural frequency of fiber Fabry–Pérot (F-P) sensor with different structure parameter have been simulated by COMSOL. The simulation results illustrate that the sensitivity is up to 1.737 nm/kPa and the natural frequency is 2.1 MHz, when the silica diaphragm thickness is 2 μm, the radius is 90 μm, and the cavity length is 18 μm. The most suitable parameters have been selected and the F-P sensor has been fabricated. When the ultrasonic signals with the frequencies of 40 kHz and 1.2 MHz are respectively applied to the sensor, the frequencies detected by the EFPI ultrasonic sensor are 39 kHz and 1.21 MHz based on a partial discharge detection experiment for the designed demodulation system. The experimental results show that the sensor can accurately detect ultrasonic signals. As an excellent platform for ultrasonic signal sensing, this EFPI ultrasonic sensing system has great potential applications in partial discharge detection field.
Źródło:
Optica Applicata; 2023, 53, 2; 199--211
0078-5466
1899-7015
Pojawia się w:
Optica Applicata
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Research on peripheral clamping of large-aperture laser transport mirror
Autorzy:
Cao, Tingfen
Liu, Bowu
Wang, Hui
Ni, Wei
Zhang, Jinli
Chen, Xiaojuan
Li, Yingang
Zhou, Hai
Jiang, Xiaodong
Hu, Dongxia
Zhu, Qihua
Powiązania:
https://bibliotekanauki.pl/articles/27310087.pdf
Data publikacji:
2023
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
transport mirror
peripheral clamping
surface distortion
assembly structure
Opis:
This article introduces the study of peripheral clamping for large-aperture laser mirrors in high power laser facilities. Some multi-point clamping schemes were experimentally tested, the results of the experiments show that these schemes cannot meet the technical requirements, and in the simulation analysis, we explain the reason for this phenomenon. It is concluded that the additional bending moment caused by the non-ideal process factors in the multi-point clamping is the main cause for the surface distortion. Based on the above conclusions, we carried out research on minor-point clamping. Experimental verification of the minor-point clamping were done, the results show that the minor-point clamping can meet the requirements of technical indicators in whole process. This work can provide a reference for the design of the large-aperture transport mirror clamping structure, which may be used in huge laser devices and telescopes.
Źródło:
Optica Applicata; 2023, 53, 2; 227--238
0078-5466
1899-7015
Pojawia się w:
Optica Applicata
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-3 z 3

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies