Autor: Lee,, C. - Katalog OPAC zbiorów

Skocz do pozycji: 1.

Tytuł:: A Study on the Optimal Design of Air Pockets in an Air Bearing Applied Tilting Index Table
Autorzy:: Lee, M.-J
Lee, C.-M
Powiązania:: https://bibliotekanauki.pl/articles/971152.pdf
Data publikacji:: 2009
Wydawca:: Wrocławska Rada Federacji Stowarzyszeń Naukowo-Technicznych
Tematy:: optimal design
tilting index table
air bearing
air pocket
Opis:: The tilting index table has attached to CNC machining center with 3axes, it can be improvement of its performance and its machining efficiency. The tilting index table is a key unit in order to manufacture some non-rotational and 3-dimensional parts, using the conventional machining center. The tilting index table is directly connected to a processing object. Regarding the increase in the deflection of the table, it directly affects processing objects and increases errors and that makes impossible to obtain desired processing precision. Thus, this study performed the shape optimization of air pockets in order to minimize the deflection presented in the existing table. In the numerical optimizing method for implementing optimal design, the general full factorial design and response surface method in the design of experiments were used. A finite element analysis was used for computational experiments in which the finite element analysis was performed by using the ANSYS Workbench, which is a type of commercial FEM tool. In addition, the analysis of the results was performed by using the commercial program, Minitab 15. The results show that the optimum design results is better than those of the initial design.
Źródło:: Journal of Machine Engineering; 2009, 9, 2; 114-123
1895-7595
2391-8071
Pojawia się w:: Journal of Machine Engineering
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 2.

Tytuł:: A study on the development of a new grinding processes for high-lead ball screw nuts
Autorzy:: Choi, Ch.
Ha, Y.
Kim, H.
Lee, C.
Powiązania:: https://bibliotekanauki.pl/articles/99599.pdf
Data publikacji:: 2010
Wydawca:: Wrocławska Rada Federacji Stowarzyszeń Naukowo-Technicznych
Tematy:: high-lead ball screw nuts
new grinding process
surface roughness
Opis:: This paper proposes a method that machines the race of high-lead ball screw nuts, which is difficult to machine using the existing geometrical machining method, without any interferences and changes in its load rating in order to perform the high-speed in ball screws. This study calculates the inclination angle of the axis of the grinding stone for avoiding the contact of the axis to the inner diamete of the nut and determines the shape of the grinding stone through changing the inclination angle and dressing curvature determined in a dressing device Then, the grinding condition will be determined by measuring the shape meter of the screw race for solving the problem. Also, the surface roughness of the grinded surface was measured using a surface roughness tester, and check with applying a grinding process of product not being high-lead ball screw.
Źródło:: Journal of Machine Engineering; 2010, 10, 1; 50-57
1895-7595
2391-8071
Pojawia się w:: Journal of Machine Engineering
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 3.

Tytuł:: An Experimental Study on the Determination of Optimal Lubrication Conditions in a High-Speed Spindle
Autorzy:: Park, S.-J.
Hwang, Y.-K
Lee, C.-M
Powiązania:: https://bibliotekanauki.pl/articles/971161.pdf
Data publikacji:: 2009
Wydawca:: Wrocławska Rada Federacji Stowarzyszeń Naukowo-Technicznych
Tematy:: optimal lubrication condition
oil-air lubrication
high speed spindle
Opis:: The heat generation inside spindles becomes a major factor that limits the allowable maximum rotational speed in machine tools and decreases the cutting quality. It is necessary to accurately estimate the temperature distribution in spindles caused by the heat generation in bearings and its heat transfer characteristics in order to perform the high-speed and high-precision in high-speed spindles. In addition, an accurate correction process is required according to the results of the estimation through investigating the thermal deformation error. A commercial program, MINITAB, was used to establish an experiment plan that analyzes the heat generation characteristics of the spindle system according to the operation and lubrication conditions of the spindle. Also, the change in the outer ring temperature of bearings was measured according to the experimental plan. After establishing a response surface model using the results of the experiment, the estimation equation of the quadratic polynomial model was proposed for determining the optimal lubrication condition. A verification experiment was applied to verify the accuracy of the experimental equation determined by the estimated regression model and the experimental value used in the estimation of the regression model.
Źródło:: Journal of Machine Engineering; 2009, 9, 2; 106-113
1895-7595
2391-8071
Pojawia się w:: Journal of Machine Engineering
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 4.

Tytuł:: Development of a high-speed air bearing spindle
Autorzy:: Ha, Y.-H.
Lee, D.-W.
Hwang, Y.-K.
Lee, C.-M.
Powiązania:: https://bibliotekanauki.pl/articles/1429126.pdf
Data publikacji:: 2008
Wydawca:: Wrocławska Rada Federacji Stowarzyszeń Naukowo-Technicznych
Tematy:: aerostatic bearing
metal foam
porous thrust bearing
porous radial bearing
Opis:: This paper investigates an air spindle with both radial and thrust air bearings of newly developing one-directional porous materials. At present, orifice type and porous type are adopted for thrust air bearings. Orifice type thrust air bearing is fabricated by machining several micro-holes on a bearing pad bearing, permeability significantly affected by particle size and machining conditions is an important factor of performance, but it is hard to c porosities is suggested. It has many micro-porosities through axial direction, so stable and plenty of air can be supplied to the thrust bearing pad. A radial air bearing also can be substituted by a radial direction porous bearing as the same reason. In case of driving parts, built-in motor type is widely applied. But it needs additional cooling parts to drop heat from a motor. So application of an air turbine drive with light-weight shaft is suggested and additionally it will reduce fabricating cost.
Źródło:: Journal of Machine Engineering; 2008, 8, 4; 25-31
1895-7595
2391-8071
Pojawia się w:: Journal of Machine Engineering
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 5.

Tytuł:: An analysis on the thermal characteristics according to the viscosity of bearing lubricant and the cooling condition for the high speed motor spindle
Autorzy:: Choi, D. B.
Lee, J. J.
Kim, S. T.
Kwon, H. D.
Kim, C. Y.
Powiązania:: https://bibliotekanauki.pl/articles/1429194.pdf
Data publikacji:: 2008
Wydawca:: Wrocławska Rada Federacji Stowarzyszeń Naukowo-Technicznych
Tematy:: high speed motor spindle
thermal displacement cooling condition
lubricant viscosity
Opis:: Thermal displacement of the high speed machine tools has a large influence on machining accuracy. The high speed motor spindle with many heat sources is widely used for the high speed machine tools recently. The important problem in this spindle is to reduce and minimize the thermal effects by motor and bearings. This paper presents the analysis on thermal characteristics for high speed motor spindle system with oil-air lubricated angular contact ceramic ball bearings and built-in motor. An analysis on the thermal characteristics of spindle is performed according to the cooling conditions and the viscosity of bearing lubricants by using finite element method. This results can be applied to the design and manufacturing for the high speed motor spindle.
Źródło:: Journal of Machine Engineering; 2008, 8, 4; 88-98
1895-7595
2391-8071
Pojawia się w:: Journal of Machine Engineering
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Informacja

Wyszukujesz frazę "Lee,, C." wg kryterium: Autor

Źródło danych

Dostawca treści

Kolekcja

Rok wydania

Wydawca

Temat

Autor

Typ dokumentu

Język